I need information on how to install and execute the export/import utility

Hi there,
I am migrating an application from Weblogic 10 to Weblogic 10.3. I need to import a desktop from a .portal file in Weblogic 10.3. I know how to do the process of installing and executing this tool in WebLogic 10, but I don't know how to do it on the 10.3 version, because it's different and I haven't found any information about this process on the internet.
Could you please tell me what do I have to do? or give me a document that can I follow the steps from?
Thanks & Regards
Franco Utreras.

Hi Franco,
If you will post your Query in http://forums.oracle.com/forums/forum.jspa?forumID=573 (WebLogic Portal Specific Forum)...then you may get more Accurate, Quick and Experties Answers.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Similar Messages

(WebLogic 10.3)how to install and execute the export/import utility (xip)

Hi there,
I am migrating an application from Weblogic 10 to Weblogic 10.3. I need to import a desktop from a .portal file in Weblogic 10.3. I know how to do the process of installing and executing this tool in WebLogic 10, but I don't know how to do it on the 10.3 version, because it's different and I haven't found any information about this process on the internet.
Could you please tell me what do I have to do? or give me a document that can I follow the steps from?
Thanks & Regards
Franco Utreras.

Do you mean how to create a new desktop portal or propagation?
Creating desktop
[http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/portals/creating_staging.html#wp1018386|http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/portals/creating_staging.html#wp1018386]
Propagation
[Using Workshop Propagation Tool |http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/propTool.html]
[Using ANT|http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/scripts.html]
AFAIK, the upgrade is pretty straightforward and I've done it before using the documentation available at [http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/upgrade/upgrade_process.html#wp1065081|http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/upgrade/upgrade_process.html#wp1065081]
Cappa

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

I think that stuff is for windows, a waste of time trying to use it on a Mac.
There is no need to download anything for Khmer on a Mac. Apple provides Khmer fonts and keuyboards with OS X.
OS X Mountain Lion: Type in another language
MS Word for Mac does not support Khmer. Use TextEdit, Pages, Nisus Writer, LibreOffice instead

How to install and start the adapter(FILE)

hi,
when i checked in RWB for the adapters which are INSTALLED and STARTED adapters it's displaying all adapters except FILE adapter .
I need to known whether this adpater is installed or installed and started ,if the case then how to install and start the adapter

Hi Nandan,
if above is the case as i mentioned in previous response then,
You need to download the latest SAP BASIS 6.40 or 7.0 ".tpz file" (as per you service pack) from service.sap.com. Then you need to put this in the import directory:
<b>\usr\sap\<your system-id>\SYS\global\xi\repository_server\import\importedFiles</b>
Now go to
<b>IR>Tools>Import design Objects, you will find the .tpz file which you down loaded. Import this and refresh your cache.</b>
P.S This is the exact path in market placehttps://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
Regards,
Sarvesh

How to install and verify the license file on ASA 5512-x

Hi Friends,
How to install and verify the license file on ASA 5512-x Firewall. I have lincese pak for CX and web security essential.
What need to be done? can i install this lic file on firewall or need to be install on CX server. Because i dont have the CX server right now.
Please share me document for installation of this license.
thx
Ashish Kumar

Hi,
one possible solution is to use an intermediate array. The intermediate array should be used in the user interface. When new data is entered the VI should read each element and then compare to the elements in the stored array. If all elements are different then update the array, otherwise display a fault message.
You could use asequence activated when the Enter button is pressed. In the first frame you would compare the First array with the stored array. it is probably best to use a Boolean indicator to show if the data is valid Make sure you declare this as a local variable.
With the sequence you can perform the comparisons in several seperate frames or in one frame with a OR to link the results. For large numbers of comparisons I prefer to use m
ultiple frames because otherwise the screen becomes a maze of wires and other programmers who may need to maintain the code in the future will find it hard to follow a single frame.
Once all the data items have been compared then the following sequence should contain a CASE statement of type True/False. Link a readable copy of your local variable to the selector of this statement. Then in the FALSE case (Assuming you have linked the boolean to be false when no data is duplicated) copy the new array to the stored array. In the TRUE case bring up an error message.
So long as your arrays are not too large and you do not use this technique in too many places in your code the processor overhead should not be badly affected. For frequent use of such a caomparison in several VIs you may want to create a dedicated subVI for the task. For very large arrays you should seek a different solution.
Hope that helps a bit.
Good luck,
Shaf

My PC is a Windows xp professional.It don't install and execute the download of iTunes 10,it send a message that the program is in a file without support to the down load

My PC is a Windows xp professional.It don't install and execute the download of iTunes 10,it send a message that the program is in a file without support to the down load

I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

How to wrap the export/import utility using perl

Hello,
How to user perl to wrap the export/import utility? Thanks.

If you are using DBMS_SCHEDULER, I would expect that you would just invoke export directly. I'm not sure I see the benefit to putting a Perl wrapper on top in that case. Of course, DBMS_SCHEDULER could invoke a Perl script just as it can invoke a shell script if there was some particular need to have a Perl layer there.
Of course, I assume that you're not trying to invoke export on a regular basis as your primary backup method... Exports should be a complement, not a supplement, to a proper physical backup (i.e. via RMAN).
Justin

OK HERE IS WHERE I AM AT HARD DRIVE WENT DOWN UPGRADED TO A 250 GIG AND NOW NEED TO KNOW HOW TO INSTALL OSX ON THE POWERBOOK G4 17

I have a powerbook g4 17 and it recently went down the hard drive sounded like it was eating itself so i replaced the hard drive with a 250 gig and now i need help on how to get osx onto the powerbook it will not boot from disk i will start all the back at 0s9 if need be can anyone please help me i miss my g4

Do you have any OSX disks?
It won't boot from the new hard drive yet because there is no OS installed.
You need to use an OSX disk, put in your mac, then when turn on, hold down the C key (to boot from the CD).
Hold it down for a long time until you hear it noisily reading from the CD drive. Once OSX starts up (from CD) you should go to Disk utility and you will need to format your new hard drive.
Once formatted, you can then install OSX.
Everything is done from the OSX install disk.
If you don't have one, you can buy a retail copy from Apple (not Snow Leopard), or from Ebay. Make sure it is a retail copy, not disks that came with a Mac as they only work with the exact model of Mac it came with.

I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

I was searching for how to setup the 903+ and my W520 and came to this thread.
1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
but if you are going to go BT headset....
2. What I did for the 903+
Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
Required reboot.
Activated the Bluetooth with FN + F5 menu.
Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
Ran the updated Bluetooth driver install.
Rebooted for good measure.
Double-clicked the Bluetooth Tray icon.
Clicked Add A Device.
Turned off my 903+ and continued to hold down the power to enable pairing mode.
Showed up in devices and added it.
Worked for audio. There are probably additional options for enabling the mic.
Hope that helps whoever might find this thread.

How to install and use the Gnome-DO application in oracle enterprise Linux

My Oracle Enterprise linux is 5.3,
I want to install and use the Gnome-Do(http://do.davebsd.com) in my box.
Please help me regarding this.
With Regards
DSK

According to Google, Gnome-Do has known issues about CPU bugs and hogs and the latest incarnation does not seem to be available for RHEL and clones. You should have more luck with Linux Desktop distributions like Fedora and Ubuntu. Or you could try to build from source using the info at: http://do.davebsd.com/wiki/Installing_Do. Good luck - I wouldn't bother.

How to turn on and off the Export Import capability in Quality &Production

Hi All,
Can any one tell me how to turn on and turn off the export, import capabilities in the Quality n Production Systems . All I know about this is, it is an SAP XI Basis task, and I am not able to get any documents related to it .
Thanks in Advance,
Hemanthika.

Hi,
Do you mean you want to disable Tools --> Export / Import feature?
Normally if you are using File Transports then lock the OS level access for all user id's and this would make sure that no transport of objects take place.
Regards
Bhavesh

Need AD Account for Only Install and Uninstall the App (exe)

Hi Team,
Anyone can help us for our below query?
we are planning to create an account in AD for Application(EXE) installation and un-installation.
Important : That ID should not have any other Privilege.
is it possible to create in AD ?
Thanks and Regards,
Dhinesh P
Dhinesh P

> we are planning to create an account in AD for Application(EXE)
> installation and un-installation.
> Important : That ID should not have any other Privilege.
Impossible... Application maintenance (install/patch/uninstall) requires
administrator privileges for most applications.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Need information on how to install OEM on exadata x3

Hi, We have a need to install OEM on our x3 exadata.
I would like everyboy input here regarding where I can find docs, steps and any advices.
Thanks in advance.

Hello user301176,
I assume you're referring to making your OEM infrastructure work with Exadata. (The actual OEM OMS should be hosted separately from the systems being monitored, which would mean outside the Exadata rack.) The quickest way to get agents etc set up would be to use the OEM automation kit in MOS note 1440951.1. The download page at Oracle Enterprise Manager Grid Control Exadata Monitoring plug-in bundle</title><meta name="Title" co… also has links to the documentation for each plugin.
Oracle also has a whitepaper on Exadata monitoring with OEM, though it comes off as more of a sales document: http://www.oracle.com/technetwork/oem/exa-mgmt/exadata-mgmt-twp-1662642.pdf
HTH!
Marc

How to install and initialize the Java ORB correctly?

Hi!
I`m having probs in installing the Java ORB (which is in the SDK, isn`y it) correctly. Im using Borland`s JBuilder6 Enterprise Edition.
Can anybody help me?!
Thanks,
jjk

Do you get an exception, a compile error, ...?
Here is essentially how I initialize the orb:
    Properties properties = new Properties();
    properties.put("org.omg.CORBA.ORBInitialPort", "12345");
    properties.put("org.omg.CORBA.ORBInitialHost", "some.host.com");
    orb = org.omg.CORBA.ORB.init(null, properties);I've found that what you need to do after that depends on your peer and how you want to connect: resolve_initial_references(), string_to_object(), Tobj_Bootstrap(), ...

I need information on how to install and execute the export/import utility

Similar Messages

Maybe you are looking for