I need information on this Object

Hi, can one help me in this object.
On a monthly basis, after all data has been fed into One Source and the monthly One Source calculations have been performed, an extract will be run from One Source , converted via XI and loaded to BW. The current plants that will be extracted from One Source are: 6101, 6102, 6103, 6201, 6202, 6203, 6301, 6302, 6601, and 6602. As additional plants get converted to SAP; they will automatically start appearing on this extract. The One Source extract file will be pulled from a corporate server for processing. (One source is the Data Warehouse)

Hi Rahul,
what expecting you exctly, hot to aciheve your requiremnt in XI.
Suppose oneSource is File System.
you want to send data to BI. Use File to ABAP Proxy .
LET ME KNOW YOUR REQUIREMENT EXACTLY.
Regards,
Raj

Similar Messages

Hello. I just upgraded to Lion OS X 10.7.3. I was previously running 10.5.7 which included the ENTOURAGE application. how do I retrieve needed information from this application that no longer runs on this new system?

Hello. I just upgraded to Lion OS X 10.7.3. I was previously running 10.5.7 which included the ENTOURAGE application. how do I retrieve needed information from this application that no longer runs on this new system?

The file you'll be looking for that has most of what you're looking for - messages, address book, etc. is the Entourage Database. The verison of Microsoft Office I run (on Lion) is Office 2008. By default the Entourage Database for this verison is at user/Documents/Microsoft User Data/Office 2008 Identities/Main Identity/Database. That folder (Main Identitty) also has your rules, signatures, and such. You'll have to recover this file from whatever backup you have. If you have a different version of Entourage, the file location will be a little diffferent.
Good luck
srb

Needed information on lock objects

needed information regarding lock objects

hi
The lock mode controls whether several users can access data records at the same time. The
lock mode can be assigned separately for each table in the lock object. When the lock is set, the
corresponding lock entry is stored in the lock table of the system for each table.
Access by more than one user can be synchronized in the following ways:
 Exclusive lock: The locked data can only be displayed or edited by a single user. A
request for another exclusive lock or for a shared lock is rejected.
Shared lock: More than one user can access the locked data at the same time in display
mode. A request for another shared lock is accepted, even if it comes from another user.
An exclusive lock is rejected.
Exclusive but not cumulative: Exclusive locks can be requested several times from the
same transaction and are processed successively. In contrast, exclusive but not
cumulative locks can be called only once from the same transaction. All other lock
requests are rejected.
regards
Nagesh.Paruchuri

Need help filling this object please!!!

I need to fill shape 1 with a solid color. Shape 2 is what the object looks like when selected. Shape 3 is what happens when I try to fill it with color. I need it to stay within the boundaries shown on shape 1. Please help, I'm relatively new to Illustrator and cannot seem to find out what it is that is happening. I'm working in Illustrator CC.

jbizzle,
However I needed to redraw the object, and instead of lines I had to use rounded rectangles to create it.
Can you reuse the outer shape that looks like part of an ellipse?
If you can, you can start by recreating the top one as follows (Smart Guides are your friends):
1) Select and copy the upper/outer elliptic shape to the front (Ctrl+C+F), then lock the original full shape;
2) With the Line Segment Tool ClickDrag between the end Anchor Points of 1) (Smart Guides say anchor when you are there), then drag over the H value in the Transform palette and Ctrl+C to copy it;
3) Click with the Ellipse Tool on the Artboard and insert the value divided by 2 for W and H, then cut it at the top and bottom Anchor Point, then delete the right half;
4) Move the half circle on top of the lower left half circle shape as closely as possible, then select both the half circle and the outer ellipse, click the outer ellipse again and in the Align palette click Vertical Align Bottom;
4) Create a copy of the half circle and move it up by its height, then ShiftDrag it to fit the upper right half circle shape as closely as possible;
Now you should have the curved parts in place, and you only need the straight parts;
5) With the Direct Selection Tool Click each pair of Anchor Points to be connected by straight segments and Ctrl+J to join them;
Now you should have one clean path to fill. After that, you can rotate and move a copy.

I need Information on this intresting OBJECT and i want to know what is XI

On a monthly basis, after all data has been fed into One Source and the monthly One Source calculations have been performed, an extract will be run from One Source , converted via XI and loaded to BW. The current plants that will be extracted from One Source are: 6101, 6102, 6103, 6201, 6202, 6203, 6301, 6302, 6601, and 6602. As additional plants get converted to SAP; they will automatically start appearing on this extract. The One Source extract file will be pulled from a corporate server for processing. (One source is the Data Warehouse).

I do not see any "Interesting OBJECT" in your post - as for knowing about XI - there is an entire forum dedicated to the same... you can find your answers there...

I need Information on this intresting OBJECT

On a monthly basis, after all data has been fed into One Source and the monthly One Source calculations have been performed, an extract will be run from One Source , converted via XI and loaded to BW. The current plants that will be extracted from One Source are: 6101, 6102, 6103, 6201, 6202, 6203, 6301, 6302, 6601, and 6602. As additional plants get converted to SAP; they will automatically start appearing on this extract. The One Source extract file will be pulled from a corporate server for processing. (One source is the Data Warehouse)

Please post this in BI section

Need information on Business Object XI R3 with Dashboard Design (Xcelsius)

Hi,
we are planning to install Business Object XI R3 with Dashboard Design (Xcelsius). In order to do this SAP has advised that we require Netweaver 7.0 Enhancement Pack1, Support Pack5.
Could you please let us know if it would take to upgrade and also any dependencies (do we also need to upgrade ECC, BI, SRM or Portal). we did not install EHP for any of the components in our landscape except solution manager (EHP1 SPS22).
Please help in providing the information.
Thanks,
Mohan K

Hi Jeff,
thank you very much for your prompt help.
But my query is do we need to upgrade any of the SAP components (ECC, SRM, Portal, MDM or SOLMAN) which are present in our landscape. no SAP components is of relase EHP except SOLMAN system.
Please suggest.
Thanks,
Mohan K

Need information on this Query

Hi guys,
can someone explain how this query works indetail.
SELECT DISTINCT (a.sal) FROM EMP A WHERE &N = (SELECT COUNT (DISTINCT (b.sal)) FROM EMP B WHERE a.sal<=b.sal);
Advance thanks for your help.
Kadiyala
Edited by: user10223931 on Mar 4, 2009 8:17 PM

Hi,
SELECT DISTINCT (a.sal),(SELECT COUNT (DISTINCT (b.sal)) FROM EMP B WHERE a.sal<=b.sal) FROM EMP A order by 2 descI hope this will help you.
The query will rank the records as per salary amount. and you will get the salary amount of the specified rank.

Need info on this K_HIERARCHY_TABLES_READ function module

Hi Experts,
I need information on this function module. what exactly this function module will do.
looking for your reply
Regards,
Kali Pramod

It's used for retrieving group information - cost center groups, cost element groups, order groups, etc.
You can do a "where used" list to see how it is called.
Rob

Could Not Find Installation Information for this Machine" I need Help!

i accidentaly erased the main drive and now i am trying hard to reinstal the OS X again but i constantly keep seeing this "could not find installation information for this machine" i need help....

hello,
I had the same problem yesterday, just go to a place with a better internet conncetion, it will work fine...
good luck

HT1688 i need to delete this email acct off my phone but cant because i did it from the link, the information that i have in is wrong. What to do?

i need to delete this email acct off my phone but cant because i did it from the link, the information that i have in is wrong. What to do?

Settings>Mail,Contacts,Calendars - go to the Accounts section, choose the account to delete, scroll to the resulting page and tap "Delete Account".

Do I need the "Wildcard in House" in the Settings, General, Profile. This says that it is expiring and cannot find any information about this from Apple or Verizon.

Do I need the "Wildcard in House" in the Settings, General, Profile?
This says that it is expiring and cannot find any information about this from Apple or Verizon.

Apple haven't yet signed agreements with yell.com and similar local information services here in the UK or in europe. The rumor is that in the UK and others, will get it sometime towards the beginning of the year.

Windows has the following information about this file type. This page will help you find software needed to open your file. Cannot get SEO quale loaded please help

I cannot download as I keep getting this when I try
Windows has the following information about this file type. This page will help you find software needed to open your file.
File Type: Firefox Browser Extension
File Extension: .xpi
Description: Compressed archive of primary file installation components – used by the Mozilla installer script to setup and install various applications. You may search the following Web site for related software and information:
Please advise how I go about downloading

despite the workaround, it doesn't fix the real problem. It shouldn't be a huge deal for adobe to add support for multiple svn versions. Dreamweaver is the first tool i've used that works with svn that doesn't support several types of svn meta data. If they're going to claim that Dreamweaver supports svn is should actually support svn, the current version, not a version several years old. This should have been among the first patches released, or at least after snow leopard came out (and packaged with it the current version of svn).
does anyone know if the code that handles meta data formatting is something that is human readable, or where it might be, or is it in compiled code.
i signed up for the forums, for the sole purpose of being able to vent about this very frustrating and disappointing situation.

SSIS 2008 generates Registration information for this application needs to be updated - VSTA.exe

I am getting the following error in SQL Server 2008 R2 (build 10.50.1734) x86 platform BI Development Studio (BIDS) 9.0.30729.4462 with .NET Framework 3.5 SP1 in a Integration Services project.
I have a package with a Data Flow task that contains a Script Component. I edit it and attempt to edit script and I get the following error:
Registration information for this application needs to be updated. To update, log on as an administrator and run this command:
C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\VSTA.exe /HostID SSIS_ScriptComponent /setup
About a minute later, another box displays with the following message
Cannot show Visual Studio Tools for Applications editor.
Additional information:
The VSTA designer failed to load. “System.Runtime.InteropServices.COMExeption (0x80004005) Error HRESULT E_FAIL has been returned from a call to a COM component at VSTADTAProvider.Interop.VSTADTEProiderClass.GetDTE(String bysHostID, Uint32 dwTimeout).
I execute the command above running as an administrator (there are no output results). BIDS displays the same symptoms.
This happens on a Windows 7 Enterprise (I said Professional in an earlier but un-related post) workstation x86 platform. I get the error even if I create a new script component in a new data flow task in a new package. I also have VS 2010 Premium
Edition (build 10.0.30319.1 RTMRel) installed on this workstation (if that matters). I also uninstalled and re-installed SQL Server from my workstation. My colleague does
not experience this error, who should have a similarily configured PC. Does anyone have any ideas? Thanks.
Greg

Old thread, but I was having the exact same problem and fixed it, so maybe this will help someone else in the future.
My problem is that I was confusing the concept of running as an administrator in Windows 7. I was logged into my machine as an administrator, but I was not actually running the "VSTA /HostID SSIS_ScriptComponent /setup" command as an administrator.
When you don't run as an administrator, the command does nothing - no message, nothing.
I ran the Command Prompt as an Administrator while logged in as a user with Administrator privileges (right click on Command Prompt, select "Run As Administrator"). Then, from that command prompt, I ran "VSTA /HostID SSIS_ScriptComponent /setup", VSTA
did its magic, and then everything worked.
After all these years, that explicit "Run As Administrator" concept still trips me up sometimes.

Help needed in Identifying dependent objects

Hi all,
Basically I need to identify the object related to Integration which is not there in one of our software product under development as compare to other(existing) already developed so that we can apply them in the product being developed.
I need to find these below from few of the packages given to me
     dependent packages/functions to read and update data
1)     Tables
2)     Packages
3)     Triggers
4)     Views
5) Jobs
I would request you to help me in carrying out this faster, I have plsql Developer tool, how to start with so that i m not mess up with and complete it faster.
Regards,
Asif.

Thankx Pierre Forstmann.
Dear All,
Can any one help me in identifying all dependent objects for one object.
Will this works for me I found from the above link provided,
as for the time being I do not have the dba priviliges...
If I am able to get the dba prviliges will this code works for me to get the
required information....
Regards,
AAK.
SQL>
create or replace type myScalarType as object
( lvl number,
rname varchar2(30),
rowner varchar2(30),
rtype varchar2(30)
Type created.
SQL> create or replace type myTableType as table of
myScalarType
Type created.
SQL>
SQL> create or replace
function depends( p_name in varchar2,
p_type in varchar2,
p_owner in varchar2 default USER,
p_lvl in number default 1 ) return myTableType
AUTHID CURRENT_USER
as
l_data myTableType := myTableType();
procedure recurse( p_name in varchar2,
p_type in varchar2,
p_owner in varchar2,
p_lvl in number )
is
begin
if ( l_data.count > 1000 )
then
raise_application_error( -20001, 'probable connect by loop,
aborting' );
end if;
for x in ( select /*+ first_rows */ referenced_name,
referenced_owner,
referenced_type
from dba_dependencies
where owner = p_owner
and type = p_type
and name = p_name )
loop
l_data.extend;
l_data(l_data.count) :=
myScalarType( p_lvl, x.referenced_name,
x.referenced_owner, x.referenced_type );
recurse( x.referenced_name, x.referenced_type,
x.referenced_owner, p_lvl+1);
end loop;
end;
begin
l_data.extend;
l_data(l_data.count) := myScalarType( 1, p_name, p_owner, p_type );
recurse( p_name, p_type, p_owner, 2 );
return l_data;
end;
Function created.
SQL>
SQL> set timing on
SQL>
SQL> select * from table(
cast(depends('DBA_VIEWS','VIEW','SYS') as myTableType ) );
---select * from table(cast('USER_VIEWS') as myTableType ) );
LVL     RNAME          ROWNER          RTYPE
1     DBA_VIEWS     SYS               VIEW
2     TYPED_VIEW$ SYS               TABLE
2     USER$          SYS               TABLE
2     VIEW$          SYS               TABLE
2     OBJ$          SYS               TABLE
2     SUPEROBJ$ SYS               TABLE
2     STANDARD SYS               PACKAGE
7 rows selected.
Elapsed: 00:00:00.42
SQL>
SQL>
SQL> drop table t;
Table dropped.
Elapsed: 00:00:00.13
SQL> create table t ( x int );
Table created.
Elapsed: 00:00:00.03
SQL> create or replace view v1 as select * from t;
View created.
Elapsed: 00:00:00.06
SQL> create or replace view v2 as select t.x xx, v1.x yy from
v1, t;
View created.
Elapsed: 00:00:00.06
SQL> create or replace view v3 as select v2.*, t.x xxx, v1.x
yyy from v2, v1, t;
View created.
Elapsed: 00:00:00.07
SQL>
SQL>
SQL> select lpad(' ',lvl*2,' ') || rowner || '.' || rname ||
'(' || rtype || ')' hierarchy
2 from table( cast(depends('V3','VIEW') as myTableType ) );
HIERARCHY
OPS$TKYTE.V3(VIEW)
OPS$TKYTE.T(TABLE)
OPS$TKYTE.V1(VIEW)
OPS$TKYTE.T(TABLE)
OPS$TKYTE.V2(VIEW)
OPS$TKYTE.T(TABLE)
OPS$TKYTE.V1(VIEW)
OPS$TKYTE.T(TABLE)
8 rows selected.
Message was edited by:
460425

I need information on this Object

Similar Messages

Maybe you are looking for