I need instructions for using my HP Photosmart D5345

I need instructions for operating my HP Photosmart D5345. I lost them.

Hi Tigger59,
Here is a link to the online manuals for the HP Photosmart D5345:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&jumpid=reg_r1002_usen&lc=en&product=3...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Similar Messages

Need instructions for iphone 4

need instructions for use of iphone 4 - where can I obtain please.
cant be simpler

The manual can be found at Apple - Support - Manuals
Allan

The Examples They Show Are not for my computer I Need instructions For A Windows Computer HP TouchSmart

The Examples They Show Are not for my computer I Need instructions For A Windows Computer HP TouchSmart

hp
The answers are in the details, and you have not given us enough details to help you.
Right now I am guessing at what you seek. Are you trying to use your HP Touch Screen to do your
Premiere Elements importing, editing, and exporting and the Touch Screen movements are not working
to do what you want to do in Premiere Elements?
Have you configured the HP computer Touch Screen? Using the Touch Screen, what cannot you do
that you can do with the mouse?
HP Support document - HP Support Center
If I am guessing correctly here, does the mouse work instead of the Touch Screen to allow you to
work in the program.
I suspect that Premiere Elements does not support Touch Screen and you will end up using a mouse, but I would need to do more homework on
that.
This is not Adobe. Rather user to user. If you are dealing with the current version, 13, you might want to contact
Adobe about the matter. More on that later, once you confirm the above or let me know that I have completely
misinterpreted your question/concern.
ATR

Need instructions for downloading/installing Flash Player

Need instructions for downloading/installing Flash Player in my PC

Hi, This is the Adobe Flash Player Uninstall link:
http://kb2.adobe.com/cps/141/tn_14157.html
This is the Adobe Troubleshooting Guide which you may want also to review. I would suggest using the Manual Installers which you can download and SAVE to your Desktop. Pay attention to any apps using Flash, you may need to Disable any Anti-Virus. Be sure to use the Administrator Account and check Settings. Be sure to Reboot after running the Uninstaller and also after Installing.
http://kb2.adobe.com/cps/191/tn_19166.html
eidnolb

Need Instructions for installing AE card in dual G5 tower

I need instructions for installing a AE card in a dual 2 GHZ powermac G5. I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor. My G5 is presently connected to a netgear router and I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router. Any help would be appreciated.
ron

] I need instructions for installing a AE card in a dual 2 GHZ powermac G5.
http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
]I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor.
You are going to need the t-shaped external aerial otherwise this is not going to work. Even though your PowerMac did not come with an Airport Extreme Card built in, it would have been supplied with the aerial.
You will need to find a replacement.
]I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router.
I am presuming that your Netgear is not wireless.
Can you connect the Airport Express to the router are do you want it in a different room?
You will be able to be connected to the router and AX at the same time, but in order to avoid internet and network issues, you should ensure that built-in-ethernet is above Airport in the network configurations.

I need instructions for installing blue tooth for apple iphone 4s?

I need instructions for installing blue tooth for apple iphone 4s?

We have Jabra bluetooth. We got out the instructions that came with the Jabra and and followed them. Worked like a charm. Just remember that once the bluetooth is paired, you cannot go more than 30 feet from your phone while using it.

Forgot icloud password, how to get it recover without any question and also alternative email becuase someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

forgot icloud password, how to get it recover without any question and also alternative email because someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

I'm sorry, but I know nothing about iCloud email. I stayed away from iCloud email and only use iCloud for limited purposes.
But take a look at this discussion and read the response from randers4. He is one of the iCloud experts in the Apple Support Communities.
https://discussions.apple.com/message/24358339#24358339
If that doesn't help, you might be better off posting in here where there are other more knowledgable iCloud users.
https://discussions.apple.com/community/icloud/icloud_on_my_ios_device

Need instructions for 17" LCD replacement...

Need instructions for the original (non-ALS) 17" LCD replacement...
Ive replaced everything else, time to replace the LCD, but need the procedure to do it.
Thanks

Before you do surgery on your imac, go to applications, system preferences, displays, and see if you can adjust the brightness. My screen was significantly darker after I upgraded to 10.4.3 and I was able bring it back to life. For some reason the upgrade caused the brightness button to regress to 0 on a scale of one to ten- hope this works for you

ICS 2.x: Instructions for using Solstice/Legato Networker to back up iPlanet Calendar Server

Instructions for using Solstice/Legato Networker to back up iPlanet Calendar
Server

The following discussion expands upon the instructions for using the
Solstice/Legato client software to back up Calendar Server in the iPlanet
Calendar Server: Administration Guide. You can find this documentation at
the following URL: 

http://docs.iplanet.com/docs/manuals/calendar/ics21/ag/calagadm.htm#1064539

If the Solstice/Legato Networker is installed under the default directory (as
per the recommended installation procedures), there should be three files
dedicated to Solstice/Legato Networker. 

<OL>
<LI>icsasm
<LI>legbackup.sh
<LI>legrestore.sh
</OL>

To initiate the Networker backup directory image, use the command 

csbackup -l

This command creates a directory named "
backup/" in the bin
directory and corresponds to Step 1
under the procedure for Backing Up Calendar Server Data in the
iPlanet Calendar Server Documentation.

After you have initiated the directory image, you can use the following commands
to back up or restore 1) a Calendar database, 2) a specific user's default
calendar, or 3) a specific calendar. The following commands assume that the Networker
client software is installed under the /usr/bin/nsr
directory and the iCS 2.x server is
installed under the /opt
directory.

1) Calendar Database
? To back up a database: 

/usr/bin/nsr/save -s legato server host/opt/SUNWicsrv/cal/bin/backup
? To restore a database: 

/usr/bin/nsr/recover -a -f -s legato server host
/opt/SUNWicsrv/cal/bin/backup
 

2) User's Default Calendar
? To back up a user's default calendar: 

/usr/bin/nsr/save -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid
? To restore a user's default calendar: 

/usr/bin/nsr/recover -a -f -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid 

3) Specific Calendar
? To backup a specific calendar: 

/usr/bin/nsr/save -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid calid
? To restore a specific calendar: 

/usr/bin/nsr/recover -a -f -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid calid

You can also use the Networker graphical user interface to schedule backups.
For example, you could set up a client saveset to back up
/opt/SUNWicsrv/cal/bin/backup
periodically.

For more information regarding Solstice/Legato Networker software, please
see the Sun documentation at 

http://www.sun.com/storage/software/backup.html 

Also see technote 4311, "iCS 2.x: What is the difference between
csbackup/csrestore and the Solstice/Legato Networker functionality?," at 

Hi,
Check below link:
http://help.sap.com/saphelp_nwpi711/helpdata/en/f2/31ad41810c11d288ec0000e8200722/content.htm
Thanks
Sunny

Need instructions for setting up wireless network at home, w/o base station

I have a new iMac with Airport Extreme card and a MacBook, also with a card. I need instructions for connecting the two Macs via Airport. I do not have a base station. The Help on the Mac does not match my actual system.
All of the manuals that I can find are for the base station.
Please help.

Hi W
You don't mention if you have any kind of internet connection on either computer, so I'll assume that you don't, and this setup will simply network the two computers with no consideration of the internet.
On either of the computers, make sure that the Airport icon is visible in the menubar, and that Airport is active - check System Preferences, Network, Airport to make sure both are the case. Now, in the menu icon, click "Create Network". You'll be prompted to name the new network, set a channel if you need to, and you can also set a password under "Show Options". Once the network has been created, your Airport icon will change to a solid grey with a computer inside it.
You should now be able to connect to the new network on your other Mac and share services.
Let me know if you have any problems with it.
Matt

I need full jargon free instructions for use of this app. Help please

wwhere are the instructions (jargon free please) for use of this app ?

Did you read the help of Adobe Reader?

Need instructions for Enhanced Cable Tech "Liberty" VGA adapter....

Hi!
I'm trying to get my old PowerMac 8500 up and running. The only display I have that is (well, should be...) compatible is an old Apple Studio Display 15" Flat Panel (Rev B.). This is the second iteration of that display, with the VGA connection, not the earlier Mac 15 pin D-sub connection, which is what the 8500 has (http://support.apple.com/kb/SP135).
I have two adapters that I'd think should do the trick of getting me something on the display. An NEC MultiScan unit that has several resolutions printed on it, but no adjustments, and an Enhance Cable Technologies Liberty adapter.
The NEC one gets me noplace, and so far, neither does the Liberty.
The Liberty has a knob with several letter stops (A-M or N), and a set of 9 (I think) DIP switches. Instructions on the back list many resolutions, but only give instructions for the last 3 DIP switches, which are for sync. It mentions to consult the instructions (which I can't find or don't have) for using the other DIP switches to get "expanded" ID codes.
I've tried all of the knob stops, and a couple DIP switch settings, but nothing seems to get me an image on the display. The display does work, it just isn't detecting a signal, and it will tell me so.
I think the 8500 may be going into "headless" server mode (no video) when it can't detect a monitor attached, so once it boots (and it IS booting), I can't get anything until I re-boot again. I'll have to dig up an OS9 install CD, to see if that helps me any. When I stored it some years ago, it was running Mac OS X 10.2 via a boot loader (it has a Sonnet PPC G3 processor upgrade card), so that may be an issue, too.
But, I was hoping that maybe someone has the instructions for the Liberty adapter kicking around in their junk drawer. All I need is the instructions for the DIP switch settings.
Regards,
Larry W.

Well, bought some new PRAM batteries from OWC. Installed one on the 8500/150 (also bought spares for my G4 & SE/30), zapped the PRAM several times, and still nothing. Then dug out my DVI-VGA adapter for my MBP, just to verify that nothing had gone sour with the display since I last put it in the box. All good there.
But, it turns out that I had a solution all along in the "Accessories Kit" in the box the Studio Display came with. There was, still sealed in 16-year-old plastic, an adapter that came bundled with the display! Cut open the plastic, installed it, hooked on the display, and presto-chango, I'm watching Jaguar boot up!
Though, Jaguar isn't so swift on this machine, even with a 250Mhz G3 processor... Might have to do with only 240MB of RAM... Once I got it back running Mac OS 9.1, though, it's a pretty snappy machine. It even reports a processor speed of 279Mhz!
Now I can get what I need from the machine, and move it on to a new home. Also check out all the rest of my SCSI devices for data I think I need, as this is my last SCSI machine that'll take more than one internal device!
And I may even see if I can make the Liberty adapter work like the Apple-supplied one.

Need instructions for creating T61 XP backup media

Can you direct me to instructions for creating the backup media (DVD preferably) for the existing 4GB backup partition on my T61 running XP? It is intact, and I can boot into it, but I'd sleep a little better if I had the option of booting from external media. I'm aware of the advice to call and purchase this media, but I would prefer to just make it myself, if possible.
Thanks!
Moderator Note; post moved to start new thread, subject edited.

I don't recall the step by step, but there is a menu item in the lenovo section you can use to burn recovery media from within windows. If I'm not mistaken, it can only be used once, however if someone already burned a set you can still restore from the harddrive and after restored you will again be able to burn one copy of recovery media.
However, I'll give you my own personal opinion on this. When you install from this recovery media you'll have an outdated operating system. The T61 recovery disc was made in 2006 or 2007 and after you install it you'll need to install the latest service pack, then you'll probably want to replace all the drivers and all the lenovo apps that are also outdated. You're going to end up replacing nearly everything, plus you're going ot have several redundant copies of all this outdated stuff taking up space. My preferred method is to use a windows setup disc that has the latest drivers and critical updates integrated, then go online and download the latest drivers for your hardware and as much or as little of the lenovo products that you want on your system. You then save an enormous amount of harddrive space and have a computer without all the bloat and it all gets done in a fraction of the time. The last time I installed from a factory restore disc set it took hours, then several hours more to replace everything with updated versions.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Anyone know where I can get instruction for using "numbers" I live in Fredericton NB

I am struggling with the "numbers" program.
Anyone know where I can take a class?
I live in Fredericton NB
Actually, I strongly suspect if classes were available on any 'feature" that
Apple sales would soar! Too often - I hear about the learning curve. Which I
must admit after many years of Microsoft can be a reall challange. Certainlly enough not to
recommend Apple to any of my friends.

Numbers Help
Numbers Help - When you have the Number application open, it will display the word "Numbers" beside the "Apple". The last option in this top menu bar is "Help". Clicking on the help menu will display the links to the Numbers help menu. Selecting "Numbers Help" will open an onboard help window. The blue links in this window will take you to articles on the most commonly asked questions about Numbers. Also, in the top right corner of this window, there is a search engine. Typing in "key words" in this window and pressing return, will display help topics related to your help search.
Selecting "Video Tutorials" from the "Help" drop down, will open Apple's web page with Video Tutorials on using Numbers. You can access also the on-line tutorials at - http://support.apple.com/videos#Numbers.
Help Pointers - http://movies.apple.com/datapub/us/podcasts/quicktips/quicktips-using_help.m4v.
Also check out - http://www.apple.com/findouthow/iwork/.
Selecting "Numbers User Guide" from the "Help" drop down will open a PDF User Guide for using Numbers. http://manuals.info.apple.com/en_US/Numbers09_UserGuide.pdf.
Looking for Numbers 08 video tutorials? http://www.apple.com/findouthow/iwork/iwork08.html
No "Save As" / How to revert back to a previous version of Numbers Documents - NOTE - this only works with 10.7 or 10.8 OS - HT4753 - OS X Lion: About Auto Save and Versions
For information on printing in Numbers, open Numbers help, and search out "printing". Also note there is a video about printing at the following link - http://www.apple.com/iwork/tutorials/#numbers-print. A knowledge base article can also be found at - http://support.apple.com/kb/HT3724
Need More Help? - Apple has a book available for iWork 09 Learning entitled "Apple Training Series: iWork 09". The book has written "how to's" as well as a video DVD, that helps you learn all the iWork 09 applications at your own pace. You can find out info. about this book at - http://www.peachpit.com/imprint/series_detail.aspx?ser=413531.
For more information on 3rd party video tutorials regarding iWork applications, just go to www.apple.com/iwork/resources

Need solution for using Symbol LRT3840 with Apps 10.7 and/or 11i?

Any suggestions for using Symbol's scanner/terminal with Oracle 10.7 and/or 11i? The symbol unit runs a telnet session (with a 1/4 viewable area). I'm looking for some alternate screen templates and/or a software solution that will allow me to remap the existing full screen forms so all critical information is displayed on the symbol unit in the allowable viewing area. I understand that version 11i of Oracle Apps does not support character-based telnet sessions, so I'm also interested in a fix that will be transparent to my material handlers when we upgrade from 10.7 to 11i. Any help would be greatly appreciated.

Hi
We are developing solutions in that area.
If we can know more of the exisitng solution you have implemented or PDA and how it is integrated with Oracle Application(whether it is a third party tool?)
then we can discuss about arriving at a solution.
My mail-id is [email protected]
Thanks and Regards,
Bibs

I need instructions for using my HP Photosmart D5345

Similar Messages

Maybe you are looking for