I need interfaces and reports with wxample
Hi all,
I need interface sample date.If any one having please provide
Best Regards
Gopal
What do you mean exactly ?
Nicolas.
Well, I assume more info in your duplicate thread :
i need interfaces and reports with wxample
Message was edited by:
N. Gasparotto
Similar Messages
-
Deploy Forms and Reports with Load Balancing
I am trying to determine what we need to install here. I have read OracleAS, Web Cache, Application Server, and
Forms documents and have no answer still.
We are currently run 9iAS with Forms and Reports 6i only.
I did not do any of those installs. We are migrating to
Forms and Reports 10g. I need to setup an OracleAS 10g
Forms and Reports application server with the ability to
do Load Balancing over 2 windows Web servers to handle
4,000+ users. The application database will be on its own
Windows server.
Do I need to install the Infastructure, BI, and Web cache?
Or just Oracle 10g Application Server option? Or other?
Do I need to install it on both web servers and do
something like clustering? Do I need to install Web
cache? I just took the 10g AS class and basically did not learn anything about deploying Forms and Reports.
Can anyone give me a place to find the things I need to
install and setup?
Thanks.
KimI am a DBA and have not done an iAS or AS installation
before but am now required to learn it. We will be using
SSL and no load balancing hardware. We setup for other
customer sites and setting Windows servers in the past.
We have not done load balancing before.
I am just confused with all the 10gAS options there are to
install to just run 10g Forms and Reports and setup
OracleAS 10g with the load balancing features.
So I just need to install OracleAS Forms and Reports
Server if I am just installing Forms and Reports with SSL.
But if for Load Balancing Oracle 10g I need to cluster
just Reports 10g? I thought I would need OracleAS10g
installed on my two Windows servers and somehow cluster
or let the two know they are the same web page handling
the incoming requests? I do know about Apache redirct. Is
that an Apache feature and is it covered in an Oracle
documentation? They did not cover it in class either. -
I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respondGenieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller! -
MCTS 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012
I am searching for training kit for Exam 70-466 (Implementing Data Models and Reports with Microsoft SQL Server 2012) but I think is not published yet. I was expecting its release in Jan or Feb 2014. Would any one can tell me its release date or any place
where I can find this book.
Thanks
Hi Azhar lqbal Gondal,
According to your description, since the issue regards training and certification,
I suggest you post the question in the Learning forums at
http://social.technet.microsoft.com/Forums/en-US/home?category=learning. It is appropriate and more experts will assist you. If you have a specific technical question about Microsoft SQL Server,
you can visit and post your question on the SQL Server Forum.
There is some detail about Exam 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012, you can review the following articles.
Exam content can be found here:
http://www.microsoft.com/learning/en-us/exam-70-466.aspx
http://borntolearn.mslearn.net/certification/database/w/wiki/525.466-implementing-data-models-and-reports-with-microsoft-sql-server-2012.aspx#fbid=Mn-t6aRhs-H
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Need tables and reports on IS-M/AM
need tables and reports on IS-M/AM
Hello Susan,
Please check this link:
http://help.sap.com/erp2005_ehp_02/helpdata/en/49/e98c371e558216e10000009b38f889/frameset.htm
Reg
assign points if useful -
How to know report server name in oracle forms and reports with weblogic server 10.3.5
Hello Experts, I am new in oracle forms and reports.I have installed Oracle forms 11g with weblogic server 10.3.5 at windows 7.Forms and reports are working well.But I want to call a report from an oracle form button press trigger. For This I need to know the my report server name which i dont know.Please tell me how can I know my report server name.
I want to call a report from an oracle form button press trigger. For This I need to know the my report server name
You can find the name of the standalone reports server in $ORACLE_INSTANCE/config/ReportsServerComponent.
Or you can use Fusion Middleware Control Console, normally at http://<machine name>:7001/em -
Item(select list) with LOV and Report with link = changed value item
Hello,
On one page I have:
- Item 'P_name' (select list) with LOV to select name of a person;
- Items 'factory' and Report 'factory'(standard created with 'Form with Report' on the same page).
Situation:
All works fine. I selected first a LOV Item 'P_name' (say 'Jane'). But....
Only when I select a record (to change the values) from the report 'factory' then LOV Item 'P_name' become empty. Report used a link to the same page to fill the report items 'factory' and make also the LOV item empty.
Question:
I have made a process that write the name 'Jane' to table.
I see two possibilities:
- LOV Item value => fill the LOV item with 'Jane' from the table before region. Is this possible?
- Report => What is the buttonname of reportlink? I can use this name in the processes.
Thanks Walter!1) what i meant was for you to test this ridiculously huge LOV outside of htmldb, but it occurred to me last night that you could, in fact, be hitting a limit of ours. after some poking around, i have confirmed that. select list items in htmldb are currently limited to 10,000 rows. this was initially done for performance reasons, but they're now opening up the restriction. if you really need to work with that many rows where the user is allowed to pick from a set of values, consider using a popup item type instead. it'd help your app performance as well (in my test cases, it stank to have to wait for my 10k select list rows to come down to my browser).
2) sorry to not have been more clear about this, but when you set your item's "Source Type" back to "Database Column", you'd have to specify that column in the "Source or value expression" field. also, you can't put a sql query into that "Post Calculation Computation" field. as i said before, "you can take a look at the attribute-level help for that field to see implementation examples."
3) stick with "Always..." for now if you're using our auto-dml process(es)
regards,
raj -
In need help: Analytic Report with Group by
Good morning,
I am trying to create a report with subtotal and grand total, which of couse goes to the group by clause, with rollup, cube, grouping... etc. I'd like to use rollup, then some columns in the Select list have to be put into the Group By clause, which is not supposed to be. So I had to use one of SUM, AVG, MIN and MAX functions, to make those columns as *aggregated, which is wrong.
Another alternative I tried is to use Cube and Grouping_id to be the filter. However, that is still very cumbentsome and error-prone, also the order of the display is absolutely out of control.
I am trying hard to stick to the first option of using the Rollup, since the result is very close to what I want, but avoid the usage of aggregation functions. For example, if I want to display column A, which should not be grouped. Other than using those aggregation functions, what I can do?
Thanks in advance.Luc,
this is a simple and a good reference for analytic functions:
http://www.orafaq.com/node/55
It takes some time to understand how they work and also it takes some time to understand how to utilize them. I have solved some issues in reporting using them, avoiding the overkill of aggregates.
Denes Kubicek -
Salesforce issue- Accessing Objects and Reports with 2 master-details
I'm using Crystal Reports XI r2 with the Salesforce data connector installed, and I know the same issue exists in CR 2008 as well. With version of the Salesforce API that the Crystal - Salesforce connector is using, objects that have 2 master-detail relationships are not available to add to reports. Even if I create a stanard Salesforce report with an object with 2 master-details, that report isn't available in the "Stored Procedures" of Salesforce in Crystal. The API is about 3 years out of date, any word on when a new version will be available? This is a big limitation.
Try SP3 for CR 2008. Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551 -
Oracle 9i running forms and reports with user/pass
Hi all!
How can I hide the user name and password in the internet explorer as it is shown in the full path for the sake of security I need it and also how can I pass the user/pass from a form to report without showing in address bar of Internet Explorer.
Regards
Mayank SharmaDear Mayank,
You can use "CGICMD.dat" file. This file can be used to add key mappings.
You add following lines at the end of this file.
MYKEY: USERID=<user_name>/<password>@<connection_string> %*
You need to restart your OC4J Instance to make above changes effective..
Then, in your web.show_document url include "CMDKEY=MYKEY".
This will definitely solve your problem.
Regards,
Manish Trivedi
Ambuja Cement,
India.
[email protected] -
Load Balancing Forms and Reports with Web Cache
We are planning to add a second OracleAS 10g middle-tier application server to an existing 10g middle-tier.
Both middle tiers will provide Forms and Reports.
Users must pass through two static HTML pages before starting Forms.
We plan to use Web Cache to load-balance (probably using round-robin) between the two middle-tiers.
Does anyone see any problems with this solution?
All comments/suggestions welcome.
Thanks,
JimYou could also load balance the two OC4J's using standard servlet mechanisms. I know that there exists a couple of good notes on Metalink. Go and do a search.
Regards,
Martin Malmstrom -
Is 10g Forms and Reports with E-Business Suite 11.5.10.2?
Hi Experts,
I want to know,
10g forms and reports is certified with Apps 11.5.10.2?
Thanks
R.SundaravelHi,
Anchorage.India wrote:
Hi Sundaravel,
10g forms and reports is certified with Apps 11.5.10.2?Yes it is.
You can refer the following ML doc,
[Installing Oracle Application Server 10g with Oracle E-Business Suite Release 11i|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=233436.1]
Thanks,
Anchorage :)It is not.
Regards,
Hussein -
Interfaces and methods with complex object
In all the examples I have, the methods of an interface use only basic java datatypes (int, Character, ..)
I want to pass a Vector that represents a list of objects from one of my own classes to an interface method.
class Myclass ...
private String p1;
private int p2;
myInterfaceMethod(..., Vector list, ...)
// list is a vector of Myclass objects
How do I know about Myclass when implementing the interface and how do I access p1 and p2 ?You can use any kind of "complex" object in your interface methods, all of them are objects at last.
The other question seems to be a misunderstanding of interface implementation. When u "implement" an interface in a class, all that JVM does is to check that you actualy have one method (with code inside its body) for each method you defined previously in the interface.
Think of an interface as a contract signed by a class. It's forced to implement each method definied in you interface. So, as the method is defined inside the class, you can access any data member of the class without doing anything "special". Do u catch it? -
Hi Folks!!!
I have an IDS10g (10.1.2) WinXP and I want to test a form that call a report, I read in the documentation that rwserver is obsolete, my questions are:
1. It's possible test this environment form that call a report with IDS10g(10.1.2) only or I must install Forms and Reports Services.
2. If the answer is yes (with IDS10g 10.1.2), which is the command for install the report services (in the v.9.0.4 is rwserver and work fine).
Very thanks and regards,
WilsonHi,
1. It's possible test this environment form that call a report with IDS10g(10.1.2) only or I must install Forms and Reports Services.
Yes
2. If the answer is yes (with IDS10g 10.1.2), which is the command for install the report services (in the v.9.0.4 is rwserver and work fine).
Don't use rwserver -install but just rwserver with a name to start up Reports Server
Frank -
Deploying forms and reports with parameters from portal
hi , how do i build forms and reports from database limiting them with parameters from the login details on the portal on my application server.
I had the same problem.
I resolve with a new third party tool:
RunDev
I've found it on:
solutionmarketplace.oracle.com
searching "rundev".
James
Maybe you are looking for
-
How do I block all in coming calls that do not show on my caller Id. Phone says "no caller id" This particular call is from a place selling septic tank cleaner. They leave an automated voice mail. They are calling me over and over. I am on the nation
-
The operation failed as no adapter is in the state permissible for this operation network issue
Hi I run some windows (2008 r2) servers on the cloud. A couple of servers are reporting a red x in the system tray where the network icon is, and my network adapter has disappeared.Using ipconfig /renew I get: The operation failed as no adapter is in
-
CAN I USE VERSION 5.0.4 ON MY NEW iMAC?
THE OLDER VERSION IS MUCH MORE USER FRIENDLY IN MY OPINION. VIEWING THE ENTIRE LIBRARY WITH NEW IMPORTS AT THE BOTTOM OF THE SCREEN WITH THE OPTION OF CLICKING & DRAGGING TO AN ALBUM IS SIMPLE & FAST. I LIKE TO CLICK ON PHOTOS/BATCH CHANGE/TEXT & NAM
-
Executing ABAP FM in Javascript
Hi, I am developing a BSP applicaion. For validation purpose I am calling ABAP FM in javascript. Now on first button click if the field value is not proper then I am getting the result as desired. But again if I change the object value and submit it;
-
How to install Linksys WUSB54G ver.4 on my MBA osx 10.8.4
How to install Linksys WUSB54G ver.4 on my Macbook air (os x 10.8.4) please help me