I need kernal upgrade on hp unix cluster ECC6 process step to step

Hello,
I need kernal upgrade procedure on hp unix cluster ECC6 in step to step
Please help me .
Regards
Mahesh

Hi,
If its a cluster or single instance, the procedure is the same.
As a thumb rule always execute the program RSPARAM from se38 and find the directory structure of the parameter DIR_CT_RUN.
The default value is generally /usr/sap/SID/SYS/exe/run
Download the SAPEXE<NO>.SAR and SAPEXEDB<no>.SAR and extract i in the above directory.
Before you do it make sure thats:
Stop the SAP R/3 resource in the cluster. Leave the SAP disk online.
Replace the Kernel
Start the instance
Replicate executables in the c:windowssapcluster or c:winntsapcluster (on both nodes)
You are done
Thanks Nirmal

Similar Messages

Vintela on unix cluster

Hello
I need to install Vintela on unix cluster.
I have 1 virtual cluster name and 2 server name ,in the sap system I have the central system and 4 appl system.
Do I need to write all parameters in all instance profile or just in the default or central instance profile?
Does someone install Vintela on unix cluster and can give me same information?
I will be glad for information?
Thank You
Eyal

You should contact the 3rd party vendor for info.
I did find this guide that might be useful tho.
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d0f6ac3c-b3ac-2b10-1b95-c9bd46194977
Regards
Juan

Need to Upgrade to RHEL 5.5 on 10.2.0.4.0 DB RAC Servers

Hello,
We need to upgrade the RHEL 4.x OS to RHEL 5.5 on all of our 2-node 10.2.0.4.0 RAC DB servers. I realize that RHEL doesn't support upgrades from MAJOR versions like this in terms that only DB re-linking activities need to be done. As a result, we cannot retain our previous system settings or services. So, we will have simply re-install our CRS and RAC DB binaries (after we back up the pre-existing DB files). Here are my 3 questions which are largely for clarification:
1.) Does this forum agree with this assessment?
2.) Is it possible to do this as a rolling upgrade such that exisitng users can use the 1st node while we rebuild the 2nd node - and then switch them over to the 2nd node and we rebuild the remaining 1st node?'
3.) Does any one have a link or document ID that they might point me to to aid in doing this? Otherwise, I will do what seems the most obvious, back the OS and DB files (mayeb do an RMAN backup as well), let the Sys Admins blow the existing OS away (node by node - see prev question for rolling upgrade question), re-install CRS and RAC and then move the data files in question back to start up the DB.
Thank you.
Matt

The term rolling upgrade refers to upgrading different databases or different instances of the same database in a RAC environment, one at a time, without stopping the database. Oracle supports the rolling upgrade of Oracle RAC (not OS like I wrote previously) in a cluster when both versions of the operating system are certified with the version of the Oracle Database you are running. Rolling patch upgrades are not available if the Oracle Database software is shared across the different nodes. This is the case where the Oracle home is on Cluster File System (CFS) or on shared NFS volumes. The feature is only available where each node has its own copy of the Oracle Database software.
I doubt that Redhat or Oracle Linux will support in-place upgrades from version 4 to 5. Your only option really available might be to split the RAC cluster and completely setup each node from scratch, than rebuild the cluster. There could be of few changes between EL 4 and 5 that may affect your ability to run a mixed cluster, i.e. raw device support. Sorry, I'm afraid I cannot give you any other practical advise. Perhaps you might want to check the RAC forum at RAC, ASM & Clusterware Installation
To answer you question about the difference with Oracle Linux. The same versions of Oracle Linux and Red Hat Enterprise are binary compatible. For Oracle Linux 5.5, x86_64, you have an option to install the Unbreakable Enterprise Kernel (UEK), which contains a newer and Oracle optimized version of the kernel, currently 2.6.32. Oracle Linux provides a free public yum repository for software management and other Oracle specific packages. For access to patches you need a subscription to the Unbreakable Linux Network (ULN).
http://www.oracle.com/us/technologies/linux/index.html
http://www.oracle.com/us/corporate/pricing/els-pricelist-070592.pdf
https://www.redhat.com/apps/store/server/
Edited by: MaC on Dec 20, 2010 7:20 PM

Clarification regarding kernal upgrade

Hi Experts,
In our production system (OS:AIX) we have database and central instance in host A and the dialog instance on host B.
As per my understanding I need to extract the kernal patch in
hostA : DVEVMGS00/exe and SYS/exe/run
hostB : D01/exe.
I have never done a kernal upgrade in this type of schenario. Kindly confirm if this process is right or anything else I need to do.
Thanks and Regards,
Amit Jana.

Hi,
Plzz don't do like that HOST -A & HOST- B.
your central instance is there in HOST-A. Then do like this.
1. Go to market place download the latest kernal.
2. Stop your Sap Application Central (HOST-A) & Dailog (HOST-B) aslo.
3. Take the backup of u r kernal dir that is RUN dir in HOST-A
    backup means copy of run dir..
4. Then uncar the downloaded files in HOST-A.
5. Copy the all uncared files in RUN directory in HOST-A no need to copy HOST-B.
6. Than start u r central instance (HOST-A).
7. After complted successfully server up, then start u r Dailog instance (HOST-B).
8. Automatic kernal will be exfected. No need to copy kernal in Dailog.
Plzz do this i was already did my company. It working successfully.
                               Thanks & Regards,
                                  Sumanbabu.b

Upgrade OES2 to OES11 Cluster

Hi all,
we plan to upgrade our 2-node Cluster running on OES2SP3 x64 to current
version running on OES11SP1. The cluster provides GroupWise, File and iPrint
Services and is connected via QLogic iSCSI HBA to our SAN.
What would you recommend how the Upgrade could be done without major
trouble?
Thanks in advance
Alex

On 16.02.2014 14:54, Alexander Lorenz wrote:
> Hi all,
>
> we plan to upgrade our 2-node Cluster running on OES2SP3 x64 to current
> version running on OES11SP1. The cluster provides GroupWise, File and iPrint
> Services and is connected via QLogic iSCSI HBA to our SAN.
>
> What would you recommend how the Upgrade could be done without major
> trouble?
There should be no trouble at all. Move all ressources to one Node, then
update the free node to OES11 as documented, move ressources to the
upgraded server, test, then do the same with the other node. But I
suggest use SP2 instead of SP1. There's really not much special on a
cluster node vs a "normal" server.
One thing you may need to check into is iPrint. If it's fully clustered,
your weg data of iPrint will reside on a clustered volume, which however
will never be available on the node that's currently upgraded, so you
likely end up with the old iPrint stuff there. Yuo may want to re-run
the iprint cluster setup script again (or if you feel able to, copy the
local iPrint data over to the cluster volume).
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de

Planning upgrade LCA build 41.12 to 41.17 + kernal upgrade

Can we do the Service pack and kernel upgrade without a manual of- and re-load of data? All notes states that an initialize is not needed a simple restart is sufficient.
My idea is:
1)       backup live cash
2)       Stop LCA
3)       Install service packs and kernel upgrade
4)       Restart LCA
5)       Reload data from backup
BR/Flemming Rønhø

Hello Flemming,
As I understood you - you have the LCA build 12 PL 002/liveCache version 7.5.00.35
On SCM 4.1 system & you are planning to run the upgrade to LCA build 17 PL 002/liveCache version 7.5.00.44 using the SAP Note 1070304 .
=> please proceed as described in SAP Note 713381 ("Importing liveCache version...") to import SCM 4.1 LCA Build 17 patch level 002 and the corresponding liveCache Kernel 7.5.0 Build 044.
If I missunderstood your question, please give more information about your project "Planning upgrade LCA build 41.12 to 41.17 + kernal upgrade". Please also let me know:
-> Wat is the version of your system?
-> Are you SAP customer?
-> Do you have the ONEDB database instance?
-> There is SAP link with helpful information & reference to the notes at
      service.sap.com/liveCache-> Release Information -> SCM 4.1 - SAP liveCache technology 7.5.0
     Is it what are you looking for?
Thank you and best regards, Natalia Khlopina

I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem?

I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g two years ago, I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem? Apple told me there was some sort of interference with the airbag system. Jaguar was totally unhelpful.

Hi Labjock,
Welcome to the Support Communities!
The article below may be able to help you with this.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Judy

I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new Ipome and Ipad. and Ipad. Now I'm told I need to upgrade my operating system. The apple store gave me conflicting instructions. Any suggestions? Thanks

I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new IPhone and Ipad. Now I'm told at the apple store that I need to upgrade my operationg system. They said they couldn't help and gave me conflicting advice about what to do. Any ideas? Thanks you!

There are three models of MacBook that comprise the 'macbook 4.1' category, and each of them a little different; however other than 'macbook 4.1' the other thing they have in common is they all are considered Early 2008. Two are white, one black, polycarbonate case, Core2Duo 2.1GHz, 2.4GHz white, 2.4GHz black.
So if you can determine which one, if any of these, is the model build year and spec you have, that would be handy. Did you tell whoever you spoke to the serial number of your computer, so they'd know by looking up the specs to see what the supported maximum RAM upgrade capacity was, and other minimum requirements to make any upgrade to Mac OS X 10.6.8 at all?
If you have the serial number you can do a lookup to 'indentify by serial number' online, and use that information to determine if the computer needs even more RAM to take it past the minimum for Snow Leopard 10.6.8 and then get it ready to upgrade (via paid download from App Store, Snow Leopard gets you that far) and see what the next supported OS X full upgrade would be for the hardware limitations on that old MacBook.
If your MacBook IS a 4.1 build, the highest OS X it could run if it has the 2.4GHz cpu, is Lion 10.7.5. That would be an upgrade from the App store, available to OS X 10.6.8+ computers that access it online. And I kind of doubt how supported a newest iphone etc may be in lion.
everymac.com has a fair amount of information across many years of Apple computing hardware...
Here's the three MacBooks that share the 4.1 designation; first shipped with as much as 1GB RAM upgrade and the other two only a 2GB RAM*, (one white/one black color) according to this information...
• MacBook "Core 2 Duo" 2.1 13" (White-08) 2.1 GHz Core 2 Duo (T8100)
• MacBook "Core 2 Duo" 2.4 13" (White-08) 2.4 GHz Core 2 Duo (T8300)
• MacBook "Core 2 Duo" 2.4 13" (Black-08) 2.4 GHz Core 2 Duo (T8300)
...as seen here: http://www.everymac.com/systems/apple/macbook/index-macbook.html
*But according to MacTracker (free: download database) http://mactracker.ca
these MacBooks can use more RAM in aftermarket specs as much as:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
To get more information use a service such as this...
•identify by serial number:
http://www.powerbookmedic.com/identify-mac-serial.php
The Apple? store or whoever you talked, to may have been as accurate as they could be without further research. Could be you may have a newer or older MacBook, which would change whatever later OS X it could run past 10.6.8. And to go past Snow Leopard, you need to download the last bits for 10.6.x to be able to go and get any later upgrade. The ones that may let a newest iphone or ipad work with it, are past SL10.6.8
Anyway, as you further verify the model build year and configuration specifications, report back.
Good luck & happy computing!

I need to upgrade my macbook ram and hard drive pls help

Hi all,
I need to upgrade my macbook's RAM and hard drive as after 3 yrs of use it is showing signs of aging.
I am novice in hardware stuff. I am planning on doing it entirely by myself and on tight budget will need to compare the prices across sellers and buy a suitable peice of kit. Please help
Questions:
1 - How to find out which RAm do I need to buy and what is the maximum I can go on my macbook?
2 - How to find which hard drive to buy and what is the maximum my macbook will support?
3 - Can I buy the SSD drive instead of SATA for this macbook?
Some of the specs are listed below:
Hardware Overview:
Model Name:          MacBook
Model Identifier:          MacBook5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MB52.0088.B05
SMC Version (system):          1.38f5
MANY THANKS FOR READING AND REPLYING TO MY POST
[email protected]

Hi Chefjeegar
Yes that screwdriver kit has the #00 phillips screwdriver that you need to access the RAM and hard drive. You'll also need the Torx driver to change the hard drive. http://www.amazon.co.uk/LINDY-Computer-Technician-Precision-Torx/dp/B0000934GO/r ef=sr_1_1?s=computers&ie=UTF8&qid=1348072554&sr=1-1
For a good explanation about RAM look at the page on OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/
In the UK Amazon or eBay might be your best bet for cheap RAM but read the description and reviews carefully. For a little more expensive but with a better warranty is Crucial UK http://www.crucial.com/uk/
A good resource for working on your MacBook is ifixit.com http://www.ifixit.com/Device/MacBook_Core_2_Duo
Is your external hard drive formatted for Mac? To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html Check that it's set up right by booting up from the external drive. Put the new drive in your MacBook, then format and partition the new drive. Then use Carbon Copy Cloner to transfer your OS back to the new drive.
Yes, you can put an SSD in the MacBook.

I need to upgrade my MacBook 13" white 2008 hard drive. I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

I need to upgrade my MacBook 13" white 2008 hard drive. I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

I had a 640GB HDD in my Early 2008 Macbook and it was just too much it would always freeze up the computer a bit for only a few seconds but ya. Then I realized that it was the size of the HDD that was causing it since the Early 2008 Macbook models can only handle a MAX od 500GB while the Early 2008 Macbook Pros could have a MAX of 640GB (Lucked out there!) lol But ya the Early 2008 Mocbooks can only handle a MAX HDD size of 500GB and that's it!! lol

I have iMovie 09 and have successfully used an older Sony Handycam to directly capture and record. Now I have a Sony HDR-PJ230 and it is not recognized. Do I need to upgrade to iMovie 11 or ???

Now I have a Sony HDR-PJ230 and it is not recognized in iMovie09. Do I need to upgrade to iMovie 11 or ???

Hi jcm2656,
iMovie ’09 does not support the Sony HDr-PJ230 camcorder. See this article for a list of cameras supported for that version of iMovie -
iMovie '09: Camcorder Support
http://support.apple.com/kb/HT3290#1
iMovie ’11 however, does support it. See this article -
Apple - iLife '11 Help - iMovie ’11 Supported Cameras
http://help.apple.com/imovie/cameras/en/index.html
Note that iMovie does not support footage recorded in 1080-60p from this Camcorder.
Thanks for using Apple Support Communities.
Best,
Brett L

I noticed that Find My iPhone on iCloud hasn't worked since iOS 8 came out. My device uses iOS 7. My question is: do I need to upgrade my device? If not, what should I do? I do not wish to upgrade my device.

I noticed that Find My iPhone on iCloud hasn't worked since iOS 8 came out. Whenever I try to use it, it always says "All Devices Offline." This is regardless of whether I am in a good Wi-Fi zone or not. I like to use Find My iPhone to remotely track my battery charging status whenever my phone is charging in a different room. That's been really handy, which is why I really need to get this fixed. No matter what computer I use, the problem is always the same.
My device uses iOS 7. My question is: do I need to upgrade my device? If not, what should I do? I do not wish to upgrade my device, especially considering the bad things I've heard about iOS 8.
Feedback would be welcome ASAP.

You don't need to update to iOS 8 to use Find My iPhone. If you haven't already tried, go to Settings>iCloud>Find My iPhone and turn it off, then reset your phone (hold the sleep/wake and home buttons at the same time until you see the Apple logo, then release). After it restarts, turn Find My iPhone back on and see if it works properly now.

I need to upgrade the silverlight version that is deployed with the SCCM 2012 client installation

We have SCCM 2012 SP1 installed and I need to upgrade the version of silverlight that get installed on the client deployement.
The version that is automaticly deployed is 5.1.10411.0 and this one is not compatible with Firefox. When you click on Application Catalog it start the browser but it fails to load because of the silverlight plug-in that is not up to date. The
version that is working fine is the 5.1.20913.0 and it's already installed on my SCCM site server.
So that is why I'm looking to upgrade the silverlight that is installed with the SCCM client.
I know that a simple workarround would be to create a package that would be deployed after the client gets installed, but why not changing the original package at the source instead of installing twice the same software the get the right version!
Is there someone that could point me where I could upgrade this Silverlight prerequirement software version ?

Note that I have not tested either of these and they will not be supported by Microsoft.
1. Copy your new version of Silverlight.exe to C:\Program Files\Microsoft Configuration Manager\Client\i386
(you'll have to re-distribute the client package after this).
OR
2. You could edit the ccmsetup.xml file with an alternative location for silverlight.exe
</Item>
<Item FileName="i386/Silverlight.exe" FileHash="417B442E128D821119008ACEEEE6CDC2A41224377A829B6EC52BABA2724F0151">
  <Applicability Platform="ALL" OS="ALL">
   <Skip>Embedded</Skip>
  </Applicability>
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

HT1386 I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that.

I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that. When I open iTunes it has a button that say "Back Up iPhone", but I'm not sure what that does. When I go into the sync options it say I have another user account and asks me if I want to merge of replace. I'm assuming it's trying to tell me I have an older iTunes Library, but don't know that. Geez, maybe people over 60 shouldn't have iPhones, iTunes just bafles me.

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

I need kernal upgrade on hp unix cluster ECC6 process step to step

Similar Messages

Maybe you are looking for