I need know some values

Hy:
At this moment I developer one agent with Solstice Enterprise agents, and when I check the generated code I see some functions get and set, but I don't see how can I need do? for I can know the OID value in this function (get or set) , the name of the variable, etc, because I need this values for an other activities on my application.
If you know How do I need do, I will appreciate your help.
Regards
Lucero

Ecck... error was mine
pl/sql code is compiling something without a problem...
declare
width number := 0 ;
begin
width := get_window_property('bla', width) ;
end ;
took me awhile since I was getting no errors...

Similar Messages

I Need To Know Some Information About Installing Windows On A Macbook Pro 13

Hello !
Actually Playing My Favourite Games Is A Problem Because I Can't Find DVD Games (Mac Version) For My Macbook Pro So I Found Out That You Can Install Windows 7 Software On A Mac But I Wanted To Know Some Information Like :
- I Know That I Can Install It Using Boot Camp But I'll Need A Windows 7 DVD So Is There Some Specialized Version For Mac ? Or I Just Need A Normal Windows 7 DVD For PC ?
- If I Installed Windows 7, Will I Lose The Mac OS X Lion ? Or I Can Have Both Softwares Together At The Same Time ?
- If I Installed Windows 7, Will It Have The Same Specifications Of Macbook Pro 13 ? (Ex: 2.4 GHz Processor)
- If I Installed Windows 7 And I Already Had Mac OS X Lion, Will The Macbook Lag Or It Will Work Properly ?
- If There's Any More Info That You Know About Installing Windows 7 On A Macbook Pro 13, Please Provide Me With It, Thanks!

This really is a forum about the MacBook Pro hardware. The best place to ask your questions would be the Windows/BootCamp forum. Your MacBook Pro 13 has one weakness that's going to make gaming a bad experience. It has an integrated Intel HD graphics processor, whereas the higher end MacBook Pro's have discrete ATI graphics processors. But the forum will help you out.

I want to buy a 5s and i have a iphone 4, i would like to know if my phone have some value in change

Hi my name is Julia, and I want to buy a iphone 5s and i have a iphone 4, I would like to know if when i'll go to buy the 5s my phone will have some value in the change
thanks

In the U.S., at least, the carriers have trade in programs. There are also lots of third party sites such as Gazelle.com that will give you money for old electronics. You should be able to get a quote from one of them.
Best of luck.

In need of some help!! my iphone 4s is not letting me take pictures or videos or even use the flashlight, does anyone know what to do??

In need of some help!! my iphone 4s is not letting me take pictures or videos or even use the flashlight, does anyone know what to do??

Hello Albert3232,
It sounds like you cannot use either camera, nor the LED as a camera. I want to recommend a couple of things here.
First, close all the open and running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
All the best,
Sterling

Does anyone know if Apple has any plans to create an electronic medical records (EMR) program? And if not, who do I email to suggest just that as a new market in desperate need of some new innovation?

Does anyone know if Apple has any plans to create an electronic medical records (EMR) program? And if not, who do I email to suggest just that as a new market in desperate need of some new innovation?

There already are some tools in the App Store (eg. My Medical - https://itunes.apple.com/us/app/my-medical/id347860026?mt=8).
If you mean something that would interact directly with a Hospitals main system or such, I don't know of any. There are numerous companies now selling and setting up central records systems around the country, but I don't know of any that are working on companion patient tools yet.
Some charity and non-profit companies, like MedicAlert Foundation are working on such things and may have mobile apps on their radar, as funds allow them to develop such thing. MedicAlert already offers an EMIR service online, but no standalone mobile app for it yet (you manage it via their web portal).
Epocrates (owned by Athena Health) might also have something in the works, or at least an interest in such a thing.

Need to show some values from Lookup in Text Area of Request Dataset

Hi,
I have a requirement where I need to display values(which are roles) coming from a lookup in text area. The reason behind is to show to end users list of roles. They should not be able to select these roles.They will just refer the list and enter desired role in a text field. I thought of using text area as the component to be used for showing these roles. However, I cannot use lookup property for widget="textarea" in the request dataset.
Can we do this or is there any other component where I can show list of roles so that users can just refer the list.
Thanks.

Lookup Property ??
TextArea is different type of widget. It doesn't come with lookup.
Search developer's guide.
– textarea: Specifies a large text field for entering multiple lines of text.
Even if they select then don't use that field for further processing. You can use Attribute instead of AttributeReference.
Workaround:
Have one text are and use Prepopulate adapter to populate those values.

I need the IP values and Subnet Mask which is given by the ISP for my jetpack so i can configure my smart tv

i need the IP values and Subnet Mask which is given by the ISP for my jetpack so i can configure my smart tv

Your public IP Address is provided by the ISP. Your smart TV does not need to know this information unless you plan to host some kind of an application or service for folks on the internet through your TV. It wouldn't work anyways since all Jetpacks sit behind a VZW NAT firewall and blocks hosting capabilities by default.
What you more than likely are referring to is the Default Gateway and Subnet mask of the Local Area Network being hosted by your Jetpack. By default these values should be something like 192.168.1.1 and 255.255.255.0. You can confirm the DG and SM by connecting a computer to the Jetpack. Every computer has a way to look up the networking information. On a Windows OS you would open up a CMD window and type in "IPCONFIG".
If you shoot us the model number of your Smart TV we may be able to look up a User Guide to confirm what kind of info is needed to connect to a wireless network. Most of the time exchanging the IP information is done automatically during the connection process. It would also be nice to know which Jetpack model you have so we can compare the User Guide for that device with your TV.

Need to restrict values in F4 help for Batch Characteristic

Hi,
I need to restrict values in F4 Help for a batch characteristic based on values entered for another characteristic. I could not find any BADI or Exit for this purpose. There is a BADI CACL_VALUE which is triggered after an entry is selected from dropdown list but nothing when we press F4. I thought of using Object Dependency but I need to write a programming logic for the requirement. Please let me know if there is any way to write program in Object Dependency or any other way for this requirement.
Regards,
Nikhil

Hi nikhil simha,
first of all, find out which search help is called.
[Hierarchy of the Search Help Call|http://help.sap.com/saphelp_nw70/helpdata/en/0b/32e9b798da11d295b800a0c929b3c3/frameset.htm]
may help you.
If you know the search help, you may enhance it, but first of all you should check the where-used-list and make sure that the search help shows the requested behavior only in the context where you want it to.
If it is your own program, you may be better off to create your own search help and define the triggering fields as search help interface input fields. Then you can use the values to filter results.
Regards
Clemens

Need to convert values into coma separated

Need to convert values into coma separated
I have a string value that stores data like 'NYK,IND,SGP,GER'
FOR EXAMPLE
V_CITY_CODE = 'NYK,IND,SGP,GER'
When I query
select * from city where city_code = V_CITY_CODE;I get no rows, this is because V_CITY_CODE has all city code as single code.
I need a function to search , and replace with ','.
I tried using instr and replace but was unable to convert it.
could some one pls assist me.
thanks in advance
Saz

Looking for this?
SQL> select * from emp
2 /
     EMPNO     DEPTNO ENAME                                 SAL DOJ       JOB
         1          1 Karthick                               80 03-DEC-11
         2          1 Karthick_1                             90 23-NOV-11
         3          2 Ram                                    80 03-DEC-11
         4          2 Ram_1                                  90 23-NOV-11
SQL> var v_ename varchar2(1000)
SQL> exec :v_ename := 'Karthick,Karthick_1'
PL/SQL procedure successfully completed.
SQL> select *
2    from emp
3   where ename in (
4                     select regexp_substr(val, '[^,]+', 1, level)
5                        from (select :v_ename val from dual)
6                    connect by level <= length(val) - length(replace(val, ','))+1
7                  )
8 /
     EMPNO     DEPTNO ENAME                                 SAL DOJ       JOB
         1          1 Karthick                               80 03-DEC-11
         2          1 Karthick_1                             90 23-NOV-11

DATASET_WRITE_ERROR :How to know the value of a field at the time of error?

Hi All,
I have an ABAP code that write some records to a flat file. Am getting a DATASET_WRITE_ERROR when this program is run.
in ST22 i checked for any info that could be of help.
The Error Text is: "No Space left on device"
Error code: 28.
Now i want to know after writing how many records did the program threw the error.
I have a counter named WRITE_CTR. <b>Is there any way in the debug mode I can check for the value of WRITE-CTR just before the program terminated ?</b> checking the value of counter each time a record is written is not practical as there are almost 40k records in total.
In ST22 i checked the section "Chosen Variables". unfortunately this counter's value is not listed there.
Please let me know if there is any way i can see the contents of a field just before a short dump is generated.
Otherwise is there any option during debug that i can set a breakpoint on a statement when the field WRITE-CTR=<some value> say when WRITE-CTR = 30000 ?
Thanks in advance,
Rit

Ok. Havent used Try..Catch in ABAP. I'll try using that. That should be a better way. Thanks.
I think it throws the error only after 20 or 30000 records are written. So its not possible to set a breakpoint where it writes to file and check which all records are written.
I wanted to know if there's any way to know the value of a filed just before the error is thrown. In the 'Watch' feature i saw an option to select a field and then give a comparison operator and all. Do you know how to use that ? Will that help me to break the execution when a field value equals a limit ? Just wondering what the Watch option is for!!
Regrads,
rit

A filter value for Query is set with some value automatically

Hello SAP sourcing Guru!
I created a query which has several filters.
Some of Filter's type is VLV.
When I preview the query somehow the filter values are already set with some value even though I did not set the default value.
For example, filter name is Region and there are four regions: Asia, NA, Europe, and SA.
I want to select one of them from drop-down menu. But Asia was already selected when I clicked the preview button for the query. I want to see "Please Select" instead of Asia from drop-down menu. I did not select "Prefill value from cache" for the filter. I made the filter Optional only. I did not set Default Value either for the filter.
Any clues?
Thank you for your response in advance.

Hi,
In the Default value field of the filter prompts, you need to mention the Class Reference ID of the corresponding field. E.g., if you have Contract document phase as a filter, then in that if you want to display a blank or none value, then you should use null:2016.
Similarly for vlv type, the system has a value 616. Hence if you want to display a None value insteead of Asia, use the following in the Default value field:
0:616:null.
The way to find the class reference ID is to goto the RG > Class Reference > Look for the field that you are attempting to default on.
Hope this helps,
Vikram

Translated wire message missing some values

Hi,
I am enqueuing an EDIFACT xml to B2B out queue (IP_OUT_QUEUE) which is getting converted to wire message and delivered correctly. But the translated wire message is missing some values:
UNH segment of EDIFACT xml:
<Segment-UNH>
<Element-0062>1</Element-0062>
<Composite-S009>
<Element-0065>ORDERS</Element-0065>
<Element-0052>D</Element-0052>
<Element-0054>07B</Element-0054>
<Element-0051>UN</Element-0051>
</Composite-S009>
</Segment-UNH>
Starting part of wire message:
UNA:+.? 'UNB+UNOB:1+ + +100407:2354+1003'UNG+ORDERS+ + +100407:2354+1003+UN+D:07B'UNH+1+ORDERS'BGM+105:::?' ?'+GSIAP.WORLD?:oracle.apps.po.event.xm::?'
In wire message, 'UNH+1+ORDERS' - this portion is not having values of Element-0052, Element-0054 and Element-0051. Why are this values ('D','07B','UN') missing in the translated wire message?
How can I make them appear in wire message?
Appreciate your help.
Thanks in Advance,
Siddhesh

Hi Siddhesh,
Check your ecs file. Possibly you have not defined these params in ecs file.
Enable the validation then you will come to know exact issue.
Rgds,
Nitesh Jain

Row cannot be located for updating. Some values may have been changed...

Hello,
I have a legacy application written in VB6 and using Oracle OLEDB Provider (version 9 and updated to the last ones from oracle site)
I've a problem during insert of a record using recordset method (AddNew).
The returned message is "Row cannot be located for updating. Some values may have been changed since it was last read. "
I know that problem is caused by a Before Insert trigger that I CANNOT change.
Trigger does not change any primary key values !!!. It put only some default values on other not rilevant columns.
I tried to use the recordset Property option "Update Criteria" = adCriteriaKey without success !
I had same problem with SQL Server but i solved putting into the trigger SET NOCOUNT ON.
I think problem is related to the fact that ADO tries to calculate number of affected rows and for doing that it use a where clause built on the changed columns but using values it had on the client.
Other important info:
Cursor = adUseClient (and i cannot adUseServer)
Provider= MSDAORA (version 9.2...)
Oracle server = 9.1
Trigger causing problem = BEFORE INSERT (for each row)
Thanks in advance
Luigi

Hello,
I have a legacy application written in VB6 and using Oracle OLEDB Provider (version 9 and updated to the last ones from oracle site)
I've a problem during insert of a record using recordset method (AddNew).
The returned message is "Row cannot be located for updating. Some values may have been changed since it was last read. "
I know that problem is caused by a Before Insert trigger that I CANNOT change.
Trigger does not change any primary key values !!!. It put only some default values on other not rilevant columns.
I tried to use the recordset Property option "Update Criteria" = adCriteriaKey without success !
I had same problem with SQL Server but i solved putting into the trigger SET NOCOUNT ON.
I think problem is related to the fact that ADO tries to calculate number of affected rows and for doing that it use a where clause built on the changed columns but using values it had on the client.
Other important info:
Cursor = adUseClient (and i cannot adUseServer)
Provider= MSDAORA (version 9.2...)
Oracle server = 9.1
Trigger causing problem = BEFORE INSERT (for each row)
Thanks in advance
Luigi

Missing some value of Message Notification from WorkCenter

Hi Expert,
I have scenario when user create message notification from workcenter, it will be send mail automatically to the user (mail account) in status new and I have successfully create it.
And the issue is =
When i preview the message from the transaction (from menu action), it will display the whole message.
But when user received the message via mail account, some value from the message is miss (not whole message will be appear)
Could anyone help me how to solve this issue?
Regards,
Rhesa Syahrial

I just used to have stalonetray running at the bottom of my screen. I made its height small enough to fit along with my conky 16px I think it was. Doesn't take up too much space.
Since I switched to i3, I find its better to just not use trays as I can simply assign a whole workspace for skype and so I don't need any tray.

Need the numeric value of PE_SIZEOF_VALUE_INFO for PEValueInfo StructSize

Post Author: gnilsen
CA Forum: Crystal Reports
I am new to Crystal reports and I'm using the old crpe32.dll to print our reports for our application since we haven't moved to using .NET yet. So I don't have access to the constant PE_SIZEOF_VALUE_INFO to set to the PEValueInfo.StructSize. So my question is, what is the value of the PE_SIZEOF_VALUE_INFO constant for the struct PEValueInfo? I need to know the value so I can set the StructSize. According to what I have below the StructSize should be set to 311 but I don't know if I can trust that.
I found these values here http://www.utteraccess.com/forums/printthread.php?Board=63&main=362717&type=post:
' Global Const PE_VI_STRING_LEN = 256' Global Const PE_BYTE_LEN = 1
Global Const PE_WORD_LEN = 2' Global Const PE_LONG_LEN = 4' Global Const PE_DOUBLE_LEN = 8' Global Const PE_VI_STRING_LEN = 256
PE_SIZEOF_VALUE_INFO = 1 * PE_BYTE_LEN + ' 15 * PEWORD_LEN + ' 2 * PELONG_LEN + ' 2 * PEDOUBLE_LEN + ' 1 * PEVI_STRING_LEN
Thank you in advance.

volcanohere wrote:
I have no intention of learning every bit of code there is in Java.BTW, I doubt there is one person on this planet the knows every bit of code, including the SUN staff who created the language. I looked up those methods in the API. That is what it is there for. If you are incapable of doing the smallest bit of research then you won't succeed for very long. And that doesn't just apply to programming.

I need know some values

Similar Messages

Maybe you are looking for