I need logic for selection screen

i have slection screen with block and inserted radio button with all and firmla with 4 digits
example: . all   firmla 1202
          . all   firmla 1203
          . all   firmla 1210

HI,
SELECTION-SCREEN BEGIN OF BLOCK rype WITH FRAME TITLE text-t04.(write text for Block)
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS R1 RADIOBUTTON GROUP one.
SELECTION-SCREEN COMMENT 4(35) text-c05 FOR FIELD R1.
(write text for Radio button1)
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS R2 RADIOBUTTON GROUP one.
SELECTION-SCREEN COMMENT 4(35) text-c06 FOR FIELD R2.
(write text for Radio button2)
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS R3 RADIOBUTTON GROUP one.
SELECTION-SCREEN COMMENT 4(35) text-c06 FOR FIELD R3.
(write text for Radio button3)
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK rype.
Hope you get the answer
Thanks
Sudheer

Similar Messages

Logic for Selection screen output

Hi All,
I have 2 blocks on my selection screen
First block has 3 radio buttons(a, b,c) and second block has 5 check boxes. When i select radio button 'C' 2 checks boxes of 2nd block should be activated (enabled).if RB 'C' is not selected those 2 chck boxes should be in disabled position. an any one help me in this regard.(logic)
Thanks in advance
P.D .Rao

Please check the below code:
REPORT ypra_sample56.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
PARAMETER: p_r1 RADIOBUTTON GROUP rg1 USER-COMMAND vend DEFAULT 'X',
           p_r2 RADIOBUTTON GROUP rg1,
           p_r3 RADIOBUTTON GROUP rg1.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK a2 WITH FRAME TITLE text-002.
PARAMETER: p_c1 TYPE c AS CHECKBOX,
           p_c2 TYPE c AS CHECKBOX,
           p_c3 TYPE c AS CHECKBOX,
           p_c4 TYPE c AS CHECKBOX,
           p_c5 TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK a2.
           INITIALIZATION
INITIALIZATION.
PERFORM enable_fields.
           AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
PERFORM sel_screen_output.
*&      Form sel_screen_output
      Selection screen Output
FORM sel_screen_output.
IF p_r1 EQ 'X' OR p_r2 EQ 'X'.
    PERFORM enable_fields.
ENDIF.
IF p_r3 EQ 'X'.
    LOOP AT SCREEN.
      IF screen-name EQ 'P_C4' OR screen-name = 'P_C5'.
        screen-active = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
ENDFORM.                    " sel_screen_output
*&      Form enable_fields
      enable fields in selection screen
FORM enable_fields .
IF p_r1 EQ 'X' OR p_r2 EQ 'X'.
    LOOP AT SCREEN.
      IF screen-name EQ 'P_C4' OR screen-name EQ 'P_C5'.
        screen-active = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " disable_fields
Use screen-input = '1' to enable and screen-input = '0' to disable the checkbox. And if u want to totally make that field disappear from screen use screen-active = '1' and '0'.
Regards,
Prakash.
Message was edited by: Prakash Ramu

Code for selection screen, urgent

Hi Everyone,
I need code for selection screen.
I have four radio buttons, p1, p2,p3,p4(assume)
If I select second radiobutton, remaining three radiobuttons should be in disable mode and also the information under them should be in disable mode. Give the coding details. Thanks in advance. U will be rewarded.
Regards,
Nagaraju

Hi,
REPORT ZTEST222 .
PARAMETERS : p_add RADIOBUTTON GROUP radi
                         USER-COMMAND radio MODIF ID MOD,
p_disp RADIOBUTTON GROUP radi DEFAULT 'X' MODIF ID pod,
p_chng RADIOBUTTON GROUP radi MODIF ID rad,
p_er_log RADIOBUTTON GROUP radi MODIF ID cod.
SELECT-OPTIONS : s_idn    FOR vendor   MODIF ID mod,
                               s_pcode FOR ws_c_pcode MODIF ID pod.
PARAMETERS: p_plant    LIKE zaw_pol_plan-plant   MODIF ID rad,
             p_zzvend   LIKE zaw_pol_plan-zzvendor   MODIF ID cod.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_add EQ 'X'.
      IF screen-group1 EQ 'MOD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_disp EQ 'X'.
      IF screen-group1 EQ 'POD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_chng EQ 'X'.
      IF screen-group1 EQ 'RAD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_er_log EQ 'X'.
      IF screen-group1 EQ 'COD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
Pls. reward if useful
    ENDLOOP.
Pls. reward if useful

Add new field infotype "z" in logical database selection screen pnp

Can add new field infotype "z" in logical database selection screen pnp
I could explain how to realize
Thanks

In case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
"Allocation operative area to optional delimiter
IF NOT p_aroper IS INITIAL.
    DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
          wa_texpr TYPE rsds_expr,
          lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
          wa_rsds_expr_tab LIKE rsdsexpr.
    REFRESH lt_rsds_expr_tab.
    wa_rsds_expr_tab-arity = '0'.
    wa_rsds_expr_tab-fieldname = 'OBJID'.
    wa_rsds_expr_tab-option = 'EQ'.
    wa_rsds_expr_tab-low = p_aroper.
    wa_rsds_expr_tab-high = '00000000'.
    MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
    APPEND lt_rsds_expr_tab.
    REFRESH lt_texpr.
    wa_texpr-tablename = 'PA9004'.
    wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
    MOVE-CORRESPONDING wa_texpr TO lt_texpr.
    APPEND lt_texpr.
pnpdynse[] = lt_texpr[].
ENDIF.
English is the forum language.
Edited by: Rob Burbank on May 18, 2011 11:41 AM

Need help on selection screen optation

1)PARAMETER: P_DETAIL RADIOBUTTON GROUP G1 DEFAULT 'X'.
2)PARAMETER: P_SUMM RADIOBUTTON GROUP G1
3)SELECT-OPTIONS: S_PGI FOR ZAPDDLIV-ZDATE
i have 2 parameters depending on parameter i need to accept selection screen for parameter 1 accept data in dd.mm.yyyy. and for parameter need to accept only mm.yyyy
only
need help on this selection criteria..

Hi Anil,
It is very much possible. Use Modif ID concept. First dont display any date, depending on radio button selected display date in which ever form u need.
See the sample coding for Modif id.
PARAMETERS: test1(10) TYPE c MODIF ID sc1,
            test2(10) TYPE c MODIF ID sc2,
            test3(10) TYPE c MODIF ID sc1,
            test4(10) TYPE c MODIF ID sc2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'SC1'.
      screen-intensified = '1'.
      MODIFY SCREEN.
      CONTINUE.
    ENDIF.
    IF screen-group1 = 'SC2'.
      screen-intensified = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Dont forget to reward points if found useful.
Thanks,
Satyesh

Dinamic variant for selection screen

Hi,
I got a requirement where i need a Dynamic variant for selection screen .There is a date field in the selection screen i want to create a variant such that when i choose it,it should give the current day date in selection screen.can anyone help me.
Regards,
Ravi

Hi,
Using Customer Exit code you can give it.
Create a Customer Exit Variable and write simple code in CMOD. See the usefull Exit code for reports in the following url.
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
WHEN 'ZV_DAT'.
    IF i_step = 1 .
      CLEAR l_s_range.
      l_s_range-low = sy-datum.
      l_s_range-opt = 'EQ'.
      l_s_range-sign = 'I'.
      APPEND l_s_range TO e_t_range.
    ENDIF.
Thanks
Reddy

Global Variable for selection screen variable

Hi All,
We need to create a report where calendar day has to be included in the selection screen.Later after executing the report we should be able to retrieve the selection screen input for calendar day and modify it and use the modified one for other calculations.Can somebody help me out in finding the global variable in the variable exit where we find all the inputs for selection screen variables....
Regards,
Shravani

shravani,
I_vnam will store the varaible names...if you have varaible in the query...
please use this code for ur help...
DATA: ww_der_date LIKE sy-datum,
        wzdate LIKE sy-datum,
        wzact_gi_dte TYPE /bi0/oiact_gi_dte.
wzact_gi_dte = sy-datum.
IF i_step = 2.
    READ TABLE i_t_var_range INTO wa_i_t_var_range WITH KEY vnam =
    'ZNODAYS'.
    ww_der_date = sy-datum - wa_i_t_var_range-low.
        CLEAR wa_i_t_var_range.
    IF i_vnam = 'ZVAGIDCUSTEXIT'.
      CLEAR l_s_range.
      l_s_range-low    = ww_der_date .
      l_s_range-high   = wzact_gi_dte.
      l_s_range-sign   = 'I'.
      l_s_range-opt    = 'BT'.
      APPEND l_s_range TO e_t_range.
      CLEAR l_s_range.
    ENDIF.
ENDIF.
in this case user will enter no.of days in ZNODAYS and that being is used in calculation and used in the next varaible....

How to write HTML code in Web Template for selection screen

Hello All,
Is it possible to write a html code in the web template html tag so that the output of the html is displayed in the selection screen, i.e before the execution of query.
I know that we can write html, which will be displayed once the query has been executed, but can it be done for selection screen.
if so, how.
My exact requirement is : to display a 2-3 lines of text in the selection criteria screen - sort of, various options available to user for entering values in the selection screen. I was thinking of putting this text using HTML code in the selection screen.
Regards,
Nagendra.

Hi Erick,
No, unfortunately nobody replied to this thread. So i assumed it is not possible to modify the selection screen thru html code.
Btw, as my requirement was to provide user with multiple answers on the selection screen. I did the validations on customer exit and popped an errror dialog when applicable.
Regards,
Nagendra.

Change default value (200) of Max No of Hits for selection screen in WAD

How do i change the default value of Maximum Number of Hits from 200 to 1000 for selection screen's find box in Web Application Designer .
Thanks in Advance
Points will be surely Rewarded

Dear Hammad,
Please refer to the wiki created by me,
http://wiki.sdn.sap.com/wiki/display/BI/Information+on+the+user+setting+for+the+selector+dialog
Regards,
Arvind

How to set default variant for selection screen

Hi,
I want to make one variant as default for selection screen for one user.
For eg., take COOIS. For the selection screen, i have 3 variants. But i want one variant to be default. Thsi is not for all users. Thsi is for particular user.
I am not seeing any way to do this. please help me..
Thanks
Srini

Hi,
If you are using Z program then you can ask your developer to get Variant name Runtime from Parameter ID.
This means you decide a Parameter ID name : ZVAR in your Z program and ask your developer to load variant each time your Z program loads.
Now, second step will be using SU01 transaction you can set value of ZVAR in Parameters tab for the user. This value will be the variant which you created for this user.
This will solve your problem and you can make n number of variants and assign it to different users.
Regards,
Arpit

Transaction Variant for Selection Screen

Hi, experts!
A question regarding transaction variants: Is it possible to create screen variants and transaction variants via SHD0 for selection screens? I' ve created a customer report with one selection screen including parameters and select options and would like to provide the users with a variant transaction for this.
Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported. And trying to create a transaction variant via SHD0 fails because values entered in the selection screen parameters and select options help screens are not saved and presented.
Any hints are more than welcome!
Regards,
Thomas

You wrote
Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported.
But, give the variant a name beginning with "CUS&" and this variant will be transported. Variant beginning with "CUS&" or "SAP&" are so-called "system variant" and are transported automatically. You can then copy the transaction code and use this new variant in the new transaction.
Regards,
Raymond

Default value for selection screen field

Hi all,
I am using LDB PNPCE. I want to give default value for field Personnel area on selection screen.
How can I do it?
Thanks
Rahul

Hi Rahul,
In the INITIALIZATION event we can set the default values for selection screen fields.
INITIALIZATION.
loop at screen.
if screen-name = 'S_MATNR-LOW'.
CLEAR S_MATNR.
s_matnr-low = '1234'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr.
CLEAR S_MATNR.
s_matnr-high = '5678'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr
clear s_matnr.
endif.
endloop.
Hope it helps.
Mark if useful
Regards,
Saumya

How to create variant for selection screen which is in subscreen

Hi,
How to create variant for selection screen which is in subscreen in a module pool program?
it is very urgent.
Thanks in advance.

Hi,
You can create the 'Parameter Transaction' so that whenever you run the particular transaction it will run with the initial value given when the Tcode was created and hence you can skip the initial screen of the module pool program.
To create Parameter transaction from SE93 you have to choose the last option i.e Parameter Transaction.
Regards
Sudheer

Need to restrict selection screen entries in logical database in HR report

After creating custom HR Report Category using Logical database, I need to restrict the options available in the in the selection Screen
for example- for company code i m getting 182 entries, but after running the program, selection-options for company code, i need only first 3 entries, don't want remailing entries
how can i do this?

Hi
You can retrieve the required entries into an internal table and use FM F4IF_INT_TABLE_VALUE_REQUEST to provide them under F4 help.
Regards
Raj

Reg logic required for selection-screen.

Hi,
i have one requirement
on selection screen 2 radio button
1 for service
2 for account
Parameter      FILE     LOCALFILE     Filename
If the radiobutton ACCOUNT is selected the default name for file will be:
     Rev_acc_com_&system_time_stamp&.dat
Elseif the radiobutton SERVICE is selected the default name for file will be:
     Rev_srv_com_&system_time_stamp&.dat
some body can give the logic for this.

take the following solution
data: tstamp type TZNTSTMPS.
data: filename type string.
call function 'CONVERT_INTO_TIMESTAMP'
exporting
   I_DATLO = sy-datum
   I_TIMLO   = sy-uzeit
importing
   E_TIMESTAMP = tstamp.
if ACCOUNT is selected then
concatenate 'Rev_srv_com_' tstamp '.dat' into filename.
else if SERVICE is selected then
concatenate 'Rev_srv_com_' tstamp '.dat' into filename.
the filename variable will be containing ur required file name..
reward points if useful....

I need logic for selection screen

Similar Messages

Maybe you are looking for