I need map two controllers to the same button.

So I have a button at Concert level in MainStage that is set to Actions>Play/Stop. This turns my click track (UltraBeat) on/off. I want to be able to control this with two different "controllers". I've got everything working fine having 2 seperate buttons in my MainStage concert but there must be a way to just have one mapped button be controled by two different controllers. For example, my drummer uses a Yamaha DTX drum pad and I use an FCB1010 foot controller. I want us both to be able to stop/start UltraBeat without having two seperate buttons in my MainStage layout.

Hi
You do realise that Mainstage 2.2 has a new "Assignments and Mappings" pane in Edit mode that will enable you to assign incoming MIDI messages and map them to MS functions without the need for Screen Controls?
Using this method, it would be simple to have one MIDI device control the Click playback using a Screen Control (for visual feedback that it is on etc), with a second mapped to the same parameter using Assignments and Mappings.
Alternatively, you would need to get both MIDI controllers to send the same MIDI message (say CC71), and then set one Screen Control to 'listen' to All MIDI ports (and possibly all MIDI Channels) using the Screen Control Inspector.
CCT

Similar Messages

Two actions in the same button

Hi. I have a button witch tells a movie clip, that is loaded
on an empty movie clip on stage (handler) with attachMovie, to play
frame 101 (it leaves the stage). How can I tell the same button, at
the same action (onRelease) to attach another movie clip only when
the other one is over (after I told it to play from frame 101) or
when it´s at frame something?
Anyone can help?
I´m using as2.0

Hi,
Create action binding for your button and try to call both the services from this method binding.
Example :
<af:commandButton action="#{pageFlowScope.myBean.submitButtonMethodBinding} .../>
In the managed bean :
public class MyBean{
public String submitButtionMethodBinding(){
---- calll first service ---
--- call second service ---
return "dontgoanywhere";
}

Two controllers on the same subnet

One of our office that already has 1 2000 controller needs to install another one. Can the new controller be on the same subnet as the old one or does it have to be on a different subnet?
thanks

Roaming is an 8 hour conversation in itself, but I will answer your question with a 'yes', you should have a mobility group defined if wireless clients may move between APs associated with different controllers.
Roaming actually has much more to do with the wireless security in use, the config of the client and back-end user database, and the layer 2 connectivity of the multiple controllers.
If you are using WEP or WPA pre-shared-key with the same layer-2 termination on the controllers, then your users really aren't 'roaming' at all, they are constantly re-associating to the different APs anyway.
Roaming, in my mind, means 'fast roaming' meaning less than 100 ms. This would require either Cisco proprietary CCKM, or some of the *sort of* WPA2 fast-reconnect features.

Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone.

My Iphone was changed because of broken down thanks to its warranty. I am from Turkey and I paid one time for my old Iphone to save. Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone. If you give me a document, I don't need to save my Iphone5 and also I don't need to pay again to save in my country.

this forum is made up of users like you, not apple employees. We can not help you with that kind of request.

Lirc: Looking for a way to map the same button to two apps

I have two apps on my PC that I would like to control: One is Mplayer, and one is Amarok. Now, I'd like a way to use (for example) the same buttons for volume, play/pause and skip/rew in both apps, but I have no idea how to do this, short of writing two lirc.confs, writing a script to swap them out and launching the script via irexec.
Can anyone think of a simpler way to do this or do I need to do it the hard way?
Ideally, I'd like it to be hierarchical: if mplayer is running, it gets the command. Otherwise, Amarok gets it (since it's always running anyways).

I have two apps on my PC that I would like to control: One is Mplayer, and one is Amarok. Now, I'd like a way to use (for example) the same buttons for volume, play/pause and skip/rew in both apps, but I have no idea how to do this, short of writing two lirc.confs, writing a script to swap them out and launching the script via irexec.
Can anyone think of a simpler way to do this or do I need to do it the hard way?
Ideally, I'd like it to be hierarchical: if mplayer is running, it gets the command. Otherwise, Amarok gets it (since it's always running anyways).

Two Domain Controllers with the Same Name

So I was working on setting up our new branch office DC. Anyway, the server failed to join the domain the first time because it upgraded the AD schema (This was our first 2012 R2 server) and the schema wasn't synced to all the other remote offices. So I
forced a sync, joined the server as a workstation, then made it a domain controller.
Anyway, after that the server would show itself as a DC in Active Directory, but all the other servers believed it was just a workstation. So, I removed Active Directory from the server (I had to force the removal). I reset the computer account on the local
DCs, then rejoined it to the domain and made it a domain controller again. This time, it appeared as a Domain Controller on the other DCs in the domain.
Now for the issue --- I've now got two objects for the server under AD Sites and Services. One of them doesn't appear to have any AD DS connections. The other has connections, but not all of them work correctly (I get errors when I tell certain connections
to sync).
What should I do to fix this?
I'm still in the setup phase of this, so I can do anything I want with this particular server. I was thinking I would demote from a Domain Controller, remove it from the domain. Then use ntdsutil to cleanup any other metadata that is hanging around in AD (Something
like: https://support.microsoft.com/KB/216498?wa=wsignin1.0 )
Does anyone else have suggestions on what I should do to fix this? --- I'm being overly cautious here as I do not want to mess anything up in Active Directory.
Thanks!

I have not done a metadata cleanup.... I was asking if I should.
The connections on the valid server appeared to be working before I deleted them (Maybe it took a while to replicate ? )
So I went through and deleted all the AD Sites and Services connections from both servers (The broken server had 5 connections to the same DC in another site). Anyway, I ran repadmin /kcc and it regenerated a connection to a server in the remote site, but
it also generated a connection between the two servers with the same name. I ran dcdiag after I did the repadmin /kcc. Anyway it shows:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC-01-CLE
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Cleveland\DC-01-CLE
Starting test: Connectivity
......................... DC-01-CLE passed test Connectivity
Testing server:
Cleveland\DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e
Starting test: Connectivity
[DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e]
DsBindWithSpnEx() failed with error 5,
Access is denied..
Got error while checking LDAP and RPC connectivity. Please check your
firewall settings.
DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e failed test
Connectivity
Doing primary tests
Testing server: Cleveland\DC-01-CLE
Starting test: Advertising
......................... DC-01-CLE passed test Advertising
Starting test: FrsEvent
......................... DC-01-CLE passed test FrsEvent
Starting test: DFSREvent
......................... DC-01-CLE passed test DFSREvent
Starting test: SysVolCheck
......................... DC-01-CLE passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x80000785
Time Generated: 12/15/2014 09:58:02
Event String:
The attempt to establish a replication link for the following writable directory partition failed.
A warning event occurred. EventID: 0x80000785
Time Generated: 12/15/2014 09:58:02
Event String:
The attempt to establish a replication link for the following writable directory partition failed.
A warning event occurred. EventID: 0x80000785
Time Generated: 12/15/2014 09:58:02
Event String:
The attempt to establish a replication link for the following writable directory partition failed.
A warning event occurred. EventID: 0x80000785
Time Generated: 12/15/2014 09:58:11
Event String:
The attempt to establish a replication link for the following writable directory partition failed.
A warning event occurred. EventID: 0x80000785
Time Generated: 12/15/2014 09:58:11
Event String:
The attempt to establish a replication link for the following writable directory partition failed.
A warning event occurred. EventID: 0x80000785
Time Generated: 12/15/2014 09:58:11
Event String:
The attempt to establish a replication link for the following writable directory partition failed.
A warning event occurred. EventID: 0x80000785
Time Generated: 12/15/2014 10:03:37
Event String:
The attempt to establish a replication link for the following writable directory partition failed.
A warning event occurred. EventID: 0x80000785
Time Generated: 12/15/2014 10:03:37
Event String:
The attempt to establish a replication link for the following writable directory partition failed.
A warning event occurred. EventID: 0x80000785
Time Generated: 12/15/2014 10:03:37
Event String:
The attempt to establish a replication link for the following writable directory partition failed.
......................... DC-01-CLE passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC-01-CLE passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC-01-CLE passed test MachineAccount
Starting test: NCSecDesc
......................... DC-01-CLE passed test NCSecDesc
Starting test: NetLogons
......................... DC-01-CLE passed test NetLogons
Starting test: ObjectsReplicated
......................... DC-01-CLE passed test ObjectsReplicated
Starting test: Replications
......................... DC-01-CLE passed test Replications
Starting test: RidManager
......................... DC-01-CLE passed test RidManager
Starting test: Services
......................... DC-01-CLE passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x00001795
Time Generated: 12/15/2014 10:03:37
Event String:
The program lsass.exe, with the assigned process ID 600, could not authenticate locally by using the target name LDAP/a23a13d0-8434-4344-bd6b-24fdf5576329._msdcs.mydomain.local. The target name used is not valid. A target name should refer to one of the local computer names, for example, the DNS host name.
......................... DC-01-CLE passed test SystemLog
Starting test: VerifyReferences
......................... DC-01-CLE passed test VerifyReferences
Testing server:
Cleveland\DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e
Skipping all tests, because server
DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e is not responding to
directory service requests.
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : mydomain
Starting test: CheckSDRefDom
......................... mydomain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... mydomain passed test CrossRefValidation
Running enterprise tests on : mydomain.local
Starting test: LocatorCheck
......................... mydomain.local passed test LocatorCheck
Starting test: Intersite
Doing intersite inbound replication test on site Cleveland:
......................... mydomain.local passed test Intersite
I've attached a screenshot of AD Sites and Services. Please note I've erased some info for privacy reasons (The site the other DC is in has been erase as well as part of its name).
Picture of AD Sites and Services

Write a progarm to test two parts at the same time

Hi:
I need to write a program in LabView that is capable of testing two parts at the same time.
Explanation:
I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
I am using LabView 2012

From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
www.ni.com/teststand
Ryan
Ryan
Applications Engineer
National Instruments

How do I share one itunes account between two users on the same computer

How do I share one itunes account between two users on the same computer without taking up twice as much space on my hard drive?

You would need to move the itunes folder to a location that both users have permissions to access such as the Shared folder or any folder on the root level of the macintosh HD.
You can find instructions here http://support.apple.com/kb/HT1203 This method allows you to share the content without sharing the same library.

HT3529 will imessaging work on two iphones using the same apple id

will imessaging work on two iphones using the same apple id

It will. If the two phones are used by two different people, however, you will need to implement some careful management of your iMessage settings to ensure that you don't each receive each-other's messages. It is a much safer option to use different Apple IDs for each individual.
On iOS devices, you are able to use separate Apple IDs for iMessage and Facetime, iCloud, and the iTunes and App Stores.

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

Two cRIOs with the same code in 1 project

I have a project that contains two cRIOs that run the same exact
program. The only difference is the IP address in the ni-rt.ini file.
I would like to create a project that represents the actual targets but
uses the same vis. In doing this I found the FPGA targets must have a
different name and therefore a different bit file. Also, the DMA FIFO
is a different instance in each target. I'm really trying to get away
from supporting two copies of the same exact code.
So, it seems this type of project doesn't fit well into the project
explorer and decided to create only 1 target with 2 source
distribution's. I can create 2 source distributions but the target
destination directory must be different. Had anyone run into this
situation and come up with a better way to handle this? I guess I'm
back to manually deploying the files and making sure the correct
ni-rt.ini file get placed in the corresponding cRIO.

Dwisti,
I suggest you look into using the Open FPGA Reference node in Bitfile
mode (right-click the Open FPGA Reference node). From my experience,
that's the best way to share the same FPGA code between multiple
targets; you just need to be aware that if you recompile, you may need
to point the Open FPGA Ref node to the new bitfile. With this approach
you don't really need to have the two FPGA Targets in the project; just
keep one as the master and that should be it (in case the FPGA Targets
are of the same type)
Hope this helps.
JMota

How to use the TableSorter for two tables at the same view?

Hello,
I am using the TableSorter object in order to sort Dynpro tables.
Suppose I have two tables at the same view, is it possible to use it seperatly for both of them?
I assume that at the wdModifyView method I will need to catch the table that the user clicked on, yet I don't have an idea of how to do it...

Hi Roy,
Constructor of TableSorter
public TableSorter(IWDTable table, IWDAction sortAction, Comparator[] comparators)
So, you have to create instance of TableSorter class for each table on the view.
best regards, Maksim Rashchynski.

Can I have two LANs with the same IP route to each other

Hi there,
I have a customer who has a televantage voip network on a private 192.68.0.0/24 network but has two sites connected via a wireless tower that wants to enable QOS over between the two sites by using a 2621XM router at each end. I've enabled QOS on both routers for voice and video but haven't deployed this yet since I'm not sure if I need to change one of the sites networks to a different network number since I'll have the routes in place with a 192.168.1.0 on the WAN side. If both remote networks stay with the same number scheme of 192.168.0.0/24 will they be able to find each other when requesting where a remote 192.168.0.0 host is or do I need to change of the offices networks to a 192.168.2.0 network to make this work? Sounds kind of basic but before deploying I wanted to get some input...thanks.

Routers cannot route unless the address blocks for each interface are different.
If you have two sites connected by any kind of link, and you'll use one site as a gateay to the Internet, then you'll need at least four different addresses/ blocks:
The 'b' site LAN, i.e., fa/0/0:192.168.0.0/24
The 'b' site WAN (interconnecting link), i.e., fa0/1: 192.168.1.1/30
The 'a' site WAN (interconnecting link), i.e., fa0/1:192.168.1.2/30
The 'a' side LAN, i.e., fa0/0:192.168.2.0/24
(assumes that your wireless link is acting as a bridge or non-routing link) - the fa0/1 device connects to the wireless devices).
If you use the same router on the 'a' side for the interconnecting link for both the 'a' LAN and the Internet gateway, then the third interface would be your Internet WAN address.
The 'b' side LAN interface is your 'b' side default gateway for you clients
The 'a' side LAN interface is the 'a' side default gateway for your clients
Set a default gateway on the 'a' router to the ISPs Default gateway / next hop address.
If you're using a third router for an Internet gateway, then the LAN interface address becomes the default gateway for the clients on that LAN, and you'll need to set up a static route pointing to the other LAN in the routers that connect the two LANs..
A routing protocol may be useful but, depending on your actual bandwidth available, it's probably better to just set up static routes (no routing protocol bandwidth utilization).
The /30 for the WAN link gives some economy of address usage, but it may also secure the link better, since there are no additional addresses for the intruder to use; they'd have to spoof one of the two valid addresses (.1 & .2) as well as crack your encryption (and / or other security).
There's an armload of other possible configurations / topologies / address schemes, I believe this one would be reasonably common.
The bottom line is that a router can only route from one address block to another. In order to pass traffic between two segments with the same address block, you need a bridge / switch, or some other layer one/two device (like a wireless transceiver pair).
Good Luck
Scott

One again, "can I use CC on two computers at the same time?" - in practice.

I know this has been asked before and all those threads are locked. Many asked the question, but I haven't found a satisfying answer yet.
Can I multi task with CC?
I want to have my laptop next to my desktop. And while I render, export or whatever my newly shot documentary on the laptop I want to work with a music video project on my desktop. Then when the render is finished I render the music video and go back to the laptop and continue on the documentary. Or maybe I just work 5 minutes on the desktop music video, then come up with something brilliant for the project on the laptop and switch. Back and forth. Will that kind of activity result in any kind of limitation, usage-wise?
So, working on Premiere on my two computers at the same time.. is it possible? Technically? I know the EULA says "only one person". But will it let one person mutli task?
I need to know this before I buy. sorry for asking this again, please bless me with a clear answer

Hi Jimmy Crim,
Yes in case of Creative cloud subscription you are allowed to install and use the cc apps in any two machines.
Even if you want you care allowed to use these apps together in both the machines.
Thanks
Kapil

Can two frames use the same SessionInfo object?

Hi,
I have some questions on using InfoBus Frame.
Do parent frame and child frame HAVE TO make use the same
SessionInfo object?
I tried to show Master table and Detailed table in seperate
frame without login twice. I am lucky it works since I happened
to make two frames have the same SessionInfo object which is
sessionInfo1 and conmment out sessionInfo1.publishSession()in
Detailed frame.
But when I tried to pass Master frame SessionInfo object to
Detailed frame there is nothing showing up in the detailed frame
it is just blank frame.
So two frames have to use the same SessionInfo object . Dose it
make sense?
I would really appreciate anyone who can enlighten me on this
subject.
Thanks you so much for the attention.
Julie Chi
null

Gopal (guest) wrote:
: HI,
: Julie Chi (guest) wrote:
: : So two frames have to use the same SessionInfo object . Dose
it
: : make sense?
: Yes, if you are working with a master details relation, data
for
: both need to be fetched from the same oracle session. So both
ur
: frames need to refer the same session. If u refer the detail
: frame to a different session, u will not see any data, because
: the information comes from a different oracle session which is
: not aware of the master data that is fetched. I think it is
: clear.
: regards,
: --Gopal
1.Use wizard and test the frame
2.pass the sessioninfo object in parent to child(put method in
child, call from parent e.g ..getsessionInfo(SessionInfo ss)
3.pass the sessioninfo object to rowsetinfo in child
4.add Database authentication (username/password is sufficient)
methods right before publish method
*publish activates RowSetInfo and connects to db
5.add methods in parent to call child
That should work though depending on how you have set up your
wizard generated java form, might tweak
Thanks
iggy de iguana
null

I need map two controllers to the same button.

Similar Messages

Maybe you are looking for