I need not see the menu to open the page but after a few seconds

How I can make a menu of Adobe Muse appears not once to open the page.    That looks after an animation that I have.    But without using the scroll.      I just want to slow their appearance on the page.

Perhaps you could put the menu in a composition widget and tick 'auto play' and 'hide all initially'.
If you set the time of the autoplay at 4 seconds then (I think) this would delay the appearance of the menu for 4 seconds.
Hope that helps.
Ben

Similar Messages

  • When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    Does Firefox switch to full screen if you press F11 ?
    You can also try the F10 key to see if that brings up the menu bar.
    * If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

  • My Wi-Fi works, but after a while not anymore. Then I've to turn of on the Wi-Fi and turn it on after a few seconds. Can anybody help me with this annoying problem?

    Hello,
    My Wi-Fi doesn't work good. After a while it doesn't work and then I've to turn of the Wi-Fi and turn it on after a few seconds. Does anybody has this same annoying problem?
    Jelle van Blokland.

    Hi Jelle van Blokland,
    Here is an article that has troubleshooting for Wi-Fi connections in iOS, including disconnecting:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Cheers!
    - Ari

  • For the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

    for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

    If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
    http://concierge.apple.com/reservation/us/en/

  • I Mac is not reading from DVD drive. Disk will insert, then some noises but after a few seconds, nothing.

    I Mac is not reading from DVD drive. Disk will insert, then some noises but after a few seconds, nothing. I am trying to install Broterh printer disks. Any ideas? I am on Mavericks.

    Reset the NVRAM/PRAM and Reset the SMC, then try again.

  • When on some website pages, the page disappears after a few seconds and a blank screen appears.

    When clicking on a link in some web pages (AARP in this case), the web page loads in a separate tab, and after a few seconds the page is replaced by a blank page and the word "done" appears on the second from the bottom bar on the screen.
    I have updated Windows XP as of 9/15/10 and Firefox to version 3.5.12, but the problem persists.

    When I turn on my ipod or I plug it in the apple logo appears for a few seconds and then the screen flashes white, soon after the "use itunes to restore" message appears but when I plug it in to my laptop the device isn't recognised on itunes

  • Mail app is blank. I can not see any thing but a blank page with blue lined format. It does not shut down either. It just blinks out after a few seconds and the icon is there alone on my home screen then everything goes black and my home screen comes

    MY Mail app does not respond in anyway to anything. The icon shows I have over 300 emails but I have no access to them. When I tap on the Mail icon a blank white page comes up with the blue format lines. No emails, no inbox, nothing, not a single letter of the alphabet is there. Within a few seconds it blinks out and I see the icon and my home screen. Soon it just blinks out to black. I am left with the icon at the bottom center of the screen. I have no way to shut it down. I have no access to the emails (300) in my inbox. All that is happening is my memory is getting filled up with emails. I would appreciate any solution to this problem barring deleting my email set up in settings.
    if I have to resort to that I will, in the meantime I am hoping for a different resolution. Thanks everyone, you are all amazing and greatly appreciated. Sincerely, Diane.

    Hey There Diane,
    If I'm understanding your situation, you've got an iPad running iOS 6.1.3 and the Mail app is not working.  I understand you don't want to remove and re-add your email account.  
    The first thing I would suggest is to make sure your iPad is backed up to iCloud or iTunes.
    Do you have an iMAP or a POP email account?  When you go online to your email service provider's website, are you able to access the 300 emails in your inbox?
    Since the Mail app is part of your iOS operating system, upgrading that software to the latest version, which is 8.1.3 may resolve this issue.  
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    http://support.apple.com/en-us/HT201398
    Try these steps if you have an unresponsive app on your iPhone, iPad, or iPod touch.
    Restart the app
    Close the app and open it again.Restart your device
    Turn your device off and back on.Check for iOS and app updates
    Make sure that you're using latest version of iOS.
    Open the App Store and tap Updates.
    If updates are available, tap Update All.
    If asked, enter your Apple ID password. 
    You might need a Wi-Fi connection to update some apps.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    http://support.apple.com/en-us/HT204204
    Update the iOS software on your iPhone, iPad, and iPod touch
    Learn how to update your iOS device wirelessly or using iTunes.
    iOS software updates introduce new features that let you do even more with your iPhone, iPad, or iPod touch. Be sure to keep your devices up to date so that you don't miss out on the latest features.Before you update
    Back up your device to iCloud or iTunes.
    If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.Update your device wirelessly
    The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
    Plug in your device to a power source.
    Tap Settings > General > Software Update.
    Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
    Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
    If you have some free space, but not enough to update over the air, you can either update using iTunes or delete content manually from your device. Whether you use iTunes or update over the air, you'll have the same amount of free space on your device after you update.
    Some iOS software updates aren't available as over-the-air updates. VPN or proxy connections might prevent your device from contacting the iOS update servers.Update your device using iTunes
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update. 
    Click Download and Update.
    If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
    Find out what to do if you get other error messages while updating your device.
    Last Modified: Jan 12, 2015
    Hope this helps ...
    - Judy

  • I can open my new InDesign files by going up through the menu and opening that way, but when I try to just double click on an InDesign file I get error messages telling me that certain plugins aren't available.

    I upgraded my Mac a few weeks ago to 10.10.2 Yosemite, and I joined the Adobe cloud so I could get access to all the new apps. I read a blurb somewhere about converting older InDesign files to the new CC version I'd have to open the old files in my old InDesign CS3, export to an ins file, then open that file in the new InDesign CC, then export it again to an idml file, then open that file and you shouldn't have any of the usual conversion problems. For the first few files I had to convert, it worked just fine. Now for some reason, whenever I try to open one of these converted files just by double-clicking on the file itself, I get an error message that says, "The document ____ uses one or more plug-ins which are currently not available on your system. Do you want to open anyway?" When I click OK, then I get another error message that says, "Cannot open ____. Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign." I thought this CC version of InDesign was the newest. Can somebody please tell me what gives with this? Any help will be very much appreciated.

    Did you reinstall CS3 after CC?
    For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
    And you shouldn't need to save as IDML after opening the .inx in CC.

  • HT204380 why does the camera in my itouch spontaneously closes after a few seconds of opening it? there was this time that I used facetime and it became freakishly hot and then after that, I tried to open my camera but quickly closed by itself.

    there was this time that I tried to use my facetime for a long time. Then after using it, it became very hot all over from the back till front. Then when I tried to open the camera function, it only went to the part where it shows the gray spiral covers without actually going to the actual camera then it went completely black and it went to home. The camera closes on its own now and i cant use it.

    1. Double-click the Home button to reveal Task Bar at bottom
    2. Hold the FaceTime/Camera app down for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Re-launch the app and test
    Note: If necessary close all apps in the Task Bar

  • I have two related keyword problems.  Some keywords get "broadcast" to every photo in an event.  It's almost impossible to delete these keywords from individual photos.  I select the keyword, hit delete and it reappears after a few seconds.

    I have two related problems with keywords in iphoto 11.  Sometimes, keywords get magically "broadcast" to every photo in an event or album.  It's difficult to delete these keywords.  If I select one and try to delete it it vanishes.  About half the time, it reappears again either in a couple of seconds or after I go to another photo and then return to the previous one.  When thios happens, I need to delete the keyword two or more times before it actually vanishes.  With several hundred photos in an event that all have a bad keyword, this is a tedious process.  I've tried rebuilding the library once, but with only the first (I think) option checked on the rebuild.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Ipad- wireless - Mail page crashes after a few seconds and cannot stay open

    Can any one help please?
    Having operated well for for a while now the Mail page only opens for a few seconds and closes down. I have re-synched with Outlook; powered down etc. but no luck so far with resolving this

    So- went to my ISP mail service and deleted all emails - there was one that was a failed delivery message(? culprit). Went to iPad and inactivated the email account. Did an iPad reset. Then reactivated the Mail account via Settings. Seems stable now !

  • Where does one sync iPhone with the new iTunes? The button to get to iPhone disappears after a few seconds.

    I downloaded the new iTunes tonight (11/30/12) and it is significantly different but there is a problem with the icon for finding the iPhone in order to sync. They have either made this significantly harder or there is a bug. The video tutorial was no help on this point. Thanks.

    try holding ctrl + S. that should pop the side bar up, so you can see your devices.

  • Was attempting to use my itouch 4 th generation to play my itunes through my receiver the 1 st song started and stoped after a few seconds so I powered off the itouch and the clockwise circle has been spinning fro the past 20 min ...any thoughts or ideas?

    I was attempting to play itunes through my receiver with my itouch 4 the 1 st song started  and stopped a few seconds later so I powered off my itouch and the clockwise circle has ben spinning for close to 1/2 hour    any suggestions as how to get the thing back to normal...............

    I was attempting to play itunes through my receiver with my itouch 4 the 1 st song started  and stopped a few seconds later so I powered off my itouch and the clockwise circle has ben spinning for close to 1/2 hour    any suggestions as how to get the thing back to normal...............

  • I recently updated me iPod touch to the IOS 6 software update. My ipod will turn on so I can see the Apple logo, but after a few seconds it turns blank. What do I do?

    My iPod touch's screen is not working. I shut it off and turned it back on a hundred times. No matter what I do, it will not work. What do I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My iPhone keeps deleting all my contacts. I have all of them in the iTunes backup but after a few seconds I open my phone they are being deleted. I think that's because I deleted all my contacts from iCloud. How can I keep them after I backup?

    So how can I backup again on my iPhone and the contacts remain there?

    Restore from itunes backup and turn on airplane mode before they gone. Turn off contacts under settings - icloud.
    turn off airplane mode. Delete icloud account. Sign back in and merge contacts.

Maybe you are looking for

  • Printing to a Windows Hosted Printer that has NO Mac Drivers

    Okay, I'm stumped. I just inherited a Canon ImageClass MF5730 MFP from my father's home office. Fantastic Laser MFP that is USB connected to my wife's PC running XP. Prints great from her PC, along with Scans, Copies etc.... I went to connect to it f

  • Adobe Flash Player Settings 'local storage' pop up will not go away

    I didn't see a Flash Player selection that fits, so hope this group is the right one...For the last few weeks when I access a website with a video ability, an Adobe Flash message pops up saying the site wants to place information on my computer.  It

  • Hierarchical query with where clause

    Hi, How can I query hierarchically a query with WHERE clause? I have a table with three fields session_id,id and root_id. When I try with the following query, select id, level from relation where session_id = 79977 connect by prior id = root_id start

  • Custom fields on Shopping Cart in SRM 6.0 SP03

    Hello All, I have made a WD enhancment and added my Custom fields on the Header tab of the Shopping cart. But the fields are static as of now, as i am not able to handle the fields in the Post and Pre-exit methods of the Web dynpro enhancement. CAn a

  • Cannot paste images into Safari when composing emails

    For some reason, when I compose an email, either using gmail or yahoo mail, it will not let me paste an image from the clipboard into the body of the email.   However, if I use Chrome as a browser instead then it works perfectly fine. I've looked thr