I need NT Embedded support files (.KDF) for AT MIO-16XE-50 and AT AO-6

Need information on Windows NT Embedded Drivers for AT MIO-16XE-50 and AT AO-6. Anyone have any ideas?

Hello;
I found a good link at the Developer Zone site and can be usefull for you. I'm also attaching a file that can be interesting for you.
Hope this helps.
Filipe
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/209eaac345736690862569c30074eb7a?OpenDocument
Attachments:
Kdf.zip ‏11 KB

Similar Messages

Photoshop CC indicates that support files necessary for operation are not installed, and to reinstall.

However, I do not have the installer app (only the uninstaller). Anyone know what I should do?

Go to the Creative Cloud desktop app, uninstall and then re-install.
Benjamin

HT4910 I need to find the file location for my iCal in iCloud

I need to find the file location for my iCal in iCloud for my Mac. I inadvertently changed the file location in Terminal and need to restore the proper location but do not know how to locate that information. Any help is much appreciated,

You should find "Preferences" in your Edit menu in iTunes.

Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007

What should be the Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007?
Regards,
Rajesh Banka

>
Rajesh Banka wrote:
> What should be the Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007?
>
> Regards,
> Rajesh Banka
Hi Rajesh,
Please see the note '833438', it explains which pack is required in this scenario.
"You cannont connect ERP (R/3) releases lower than 4.6C to CRM 5.0.
All subsequent CRM releases (5.0 or higher) cannot be connected to ERP lower
than (R/3) 4.6C.
These types of system landscapes are not supported by SAP.
If you are using CRM 5.0, you must have implemented Plug-in PI 2004.1
Support Package 10 and, provided you have Basis Release 620 or higher, you
must import PI_BASIS 2005.1 in R/3. --> After you have imported these
plug-ins"
Thanks,
Nitin Sharma

IV measurement example for PCI-MIO-16XE-10

Is there Labview IV measurement examples for PCI-MIO-16XE-10 board ? I'm especially interested in producing the clean voltage out from the board. I'm seeing 10 meV noise in the analog voltage output.

Hello,
Reading the generated voltage with one of the anlaog input channels is the most recommended way to see if your board is giving an offset.
I would also recommend to run the E-Series Calibrate VI. You can find this VI in the LV Functions Palette: Data Acquisition>>Calibration and Configuration. In the following link you will find an example that shows how to do this.
Calibrate and E-Series Board using Internal Voltage Reference
Good luck with your application!

Exporting .dv files to supported files types for Windows Movie Maker

I am digitizing all of my friends' family videos with iMovie and I now have them all as Apple .dv files. Unfortunately some of my freinds do not have Macs, so I must convert them. There are many options for converting .dv files to formats that Windows Movie Maker can import, but every combination of wrapper and codec I have tried has either resulted in low quality or results in a size that it is at least double. Because these are family memories I do not want to lose quality compared to the Apple Mac .dv files that I have. On the other hand, I would prefer not to double the file size for the same quality that I had.
What converter do you recommend and what combination of wrapper (mpeg4, avi, mov, etc.) and codec (h264, jpeg, etc.) can convert Mac .dv files into full resolution files for Windows Movie Maker?
What I have tried:
I was advised by Applecare to try DivX converter, but it does not accept .dv files. I have been trying Mpeg Streamclip with the following combinations:
exporting to AVI with DivX Codec seemed low quality
exporting to AVI with H.264 was not readable by Windows Movie Maker
exporting to AVI with Apple Photo JPEG Codec was more than twice the orginal .dv file size
Thanks.

mkl111 wrote:
... There are variants of dv files and .. .
best to my knowledge - no.
.dv is a standard, created by movie-cams. iMovie handles this codec 'natively'.
only allowed differences are PAL and NTSC …
I copied a zillion .dv files without processing/editing directly from the Events folder onto a fat32-formatted HDD.
but even edited movies are compatible: Export using Quicktime and in the drop down DV-STREAM ...
afaik, in Movie Maker you have to choose 'Import file' - done.
sorry, no idea which of the hundred of versions of WMM is in use on the other side of the street

Best file system for PPC Mac, Intel Mac, and Win 7 PC

I really was nut sure which section to post this in, so this seemed like the best place. I have a 3TB external hard drive, that I need to read and write to on a G5 running 10.5.8, A MacBook Pro running 10.8.2, and various windows PC's, what is the best file system to use, or better yet, format, depending on what terminology you use, adn I need to transfer large files(larger than the 4GB limit on FAT). Im willing to try any suggestions. I would prefer not to use extra software, if it is neccessary though, I can on the mac's but not as easily on the Win PC's. I would also prefer an app from apple, I seem to have bad luck with third-party software, but if you know of one that works nicely, again, I'm willing to try any suggestions.

Another alternative is a two-partition external drive. All platforms supported without special software on one drive. You could use mnemonic partition names like HFS and EXF for mounted recognition. Think of this as a functional, single-drive, mirrored RAID set (RAID 1). A file copy to each partition (if needed) provides redundant platform interoperabililty and file backup.
HFS+ JournaledAll Macs
ExFat
Windows 7
Intel Macs

Error: the cabinet file required for this installation is corrupt and cannot be used.

Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
"the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
Any help is appreciated! Thanx

Hi Dazattack, I suggest you check the following KB article first:
Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
http://support.microsoft.com/kb/314810
Note: Though it's for Office, some steps in the article can still be used in such scenario.
Meanwhile, can you install other applications that downloaded from the Internet ?
Sean Zhu - MSFT

File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2

Hello,
We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
If anyone able to help me with required Solaris file system. it will be great help.
Please let me know if there is any query.
Thanks.

> All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
> But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
> Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
So you'd need to read the installation guides
Markus

Glitch Energy for pci-mio-16xe-10

The E-Series user manual does not provide the "glitch energy" for the pci-mio-16xe-10 board's analog output. It DOES give the glitch energy for the other boards (pci-mio-16E-1, pci-mio-16xe-50, etc.). Why the ommision for my board? I know that my board does not allow reglitching, but I still need the normal glitch energy magnitude and duration. I need this information ASAP please!

Hi,
The card mentioned, unlike the other E series cards does not have a reglitching circuitry. Hence its specification is not done because it is too small to be noticeable, particularly for 16 bit boards.
Please do let me know if you have any questions.
Sincerely,
Sastry Vadlamani
Applications Engineer
National Instruments.

Looking for Labview Examples for At-MIO-16DE-10 and AMUX-64T

looking for examples to record:
Load vs strain and temperature using these two.
Also a quick guide to how to get started. I hav Labview 6i and the card and board. No experience yet.

Greetings,
There are a variety of documents on our website that contain information about using the AMUX-64T with an MIO device. There are also example programs that show how to acquire readings using an MIO device with the AMUX-64T. I have linked to some of better documents below as well as the AT-MIO-16DE-10 and AMUX-64T User Manuals.
AT E Series User Manual
http://digital.ni.com/manuals.nsf/webAdvsearch/6FB4341E8E3080F086256BD000550261?OpenDocument&vid=niwc&node=132100_US
AMUX-64T User Manual
http://digital.ni.com/manuals.nsf/webAdvsearch/AF2CEB4411E9D3DE862567130055EAAC?OpenDocument&vid=niwc&node=132100_US
How do I Address an AMUX-64T with an MIO Board?
http://digital.ni.com/public.nsf/websearch/C6D362737414AD6D862562A80070E694?OpenDocument
Taki
ng Thermocouple Measurements Using the AMUX-64T
http://digital.ni.com/public.nsf/websearch/9D8232DFFE50108F86256DCD005A319B?OpenDocument
I would start with making sure the AT-MIO-16DE-10 is installed and configured correctly. You can used Measurement and Automation Explorer (MAX), which is software that is installed with NI-DAQ, to configure and test the AT-MIO-16DE-10. The AT-MIO-16DE-10 user manual goes through the installation and configuration steps for the device. Then I would attach the AMUX-64T and try to acquire signals. You can use the AMUX-64T user manual and the other linked documents to help you determine how to acquire signals when the AMUX-64T is connected to the AT-MIO-16DE-10.
I hope this helps.
Regards,
Todd D.
NI Applications Engineer

Need assistance embedding separate files into a PDF

All,
I am using Adobe Acrobat X Pro (Version 10.1.2). I followed the instructions below to try and embed separate Word, Excel, PowerPoint, and PDF files into my PDF document as thumbnails, but the only problem is, this only works on my computer because the files are saved on my machine. As soon as I move my PDF file which contains the links, the links will not open.
How do I essentially do the same thing but have the thumbnail links be viewable by anyone, no matter their location?
Create a link using the Link tool
Choose Tools > Content > Link. The pointer becomes a cross hair, and any existing links in the document, including invisible links, are temporarily visible.
Drag a rectangle where you want to create a link. This is the area in which the link is active.
In the Create Link dialog box, choose the options you want for the link appearance.
Select one of the following link actions:
Go To A Page View
Click Next to set the page number and view magnification you want in the current document or in another document (such as a file attachment), and then click Set Link.
Open A File
Select the destination file and click Select. If the file is a PDF, specify how the document should open (for example in a new window or within an existing window), and then click OK.
Note: If the filename is too long to fit in the text box, the middle of the name is truncated.
       Open A Web Page
                 Provide the URL of the destination web page.
       Custom Link
                 Click Next to open the Link Properties dialog box. In this dialog box, you can set any action, such as reading an article, or executing a menu command, to be associated with the link.

Hi George,
I just tried adding the files as attachments; however I didn't like doing that because it increased the file size of my PDF document quite a bit.
I'm not sure if you're familiar with the "Insert Object" command in MS Word, but I want to do the same thing in my PDF document...but the key is, anyone must to be able to open the embedded file from any location.
I created an MS Word document with several embedded objects. I was later asked to PDF the Word document, but since embedded MS Word objects do not migrate to the PDF, I am now trying to embed the same files I embedded into my Word document into my PDF document over top of the icon image. The file types I'm trying to embed include MS Word, Excel, PowerPoint, and Adobe PDF. Does this make more sense? I want to create a hyperlink over top the icon image that was PDF'd from the MS Word document which allows any user to click on the link and open the separate file.

Need help embedding FLV files on a page

I am working in apex 4.2 and am having trouble embedding a VLC player in an apex page. So far, I have been able to embed and play wmv or mpeg videos in apex. I am primarily testing in IE. Will worry about other browsers later (Sofari, Mozilla, etc).
I have downloaded and installed a vlc player. The source code is as follows:
<embed src="f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.:APPLICATION_PROCESS=media:::GP_MEDIA_ID:&P37_MEDIA_ID."
autostart = "true" hidden="false" width="800" height="500" style="border-style:solid;" type="application/x-vlc-plugin"
pluginspage="http://www.videolan.org" version="VideoLan.VLCPlugin.2" </embed>
However, when I go to the page, it still shows a broken link. I am not sure what is missing or where the problem lies. My only other "hunch" is that I haven't added or mapped out a mime-type for video/x-flv to one of the config files on my server. Could this be the problem??? Either way, I'm still stumped. Any help would be greatly appreciated. Thanks in advance.

Update:
I removed the "iTunes Library" file from Home>>Music>>iTunes, which allowed me to get back into iTunes, but I don't know how to connect to the files without it locking up again in the event that the mount to her share on my iMac becomes unmounted again.

Need help with Raw file converter for ps6 on windows xp

I had to re-install my CS6 on my computer and now I can't get any of the raw files open. I'm not on the cloud and am running Windows xp, service pack 3. Can anyone help?

Thanks Richard. I made sure that I was totally up to date via help-updates on all programs (cs6 & bridge) and it still doesn't work. Any other thoughts? I remember vaguely that I had this problem before and had to download a new file. I tried looking on Adobe site and the suggestion is the raw conversion 8.3. Downloaded that (said it was for windows xp, serv. pack 3) and I can see the file but when I click on that it comes up as a .pf file and I"m not sure where to go from here ... or if I have now messed up everything really well.
Yes, XP is on the way out of my life as I need a new computer so this maybe the push that I need. But in the meantime, I really need to process some images.
Any other thoughts?
Noella

Supported file format for MS translation via API call

Hi,
I am evaluating MS Translator APIs and I have a couple of questions.
(1) What kind of file formats does MS Translator supports?
(2) Is there any code sample to translate the file(instead of just the string text) by calling the API?
Thanks.
Wei

Hi Wei,
(1) The supported text formats are plain text and HTML.
(2) Such a sample is not part of our provided documentation. The leading TM tools which offer integration with the Microsoft Translator service offer a variety of file format conversions.
Chris Wendt
Microsoft Translator

I need NT Embedded support files (.KDF) for AT MIO-16XE-50 and AT AO-6

Similar Messages

Maybe you are looking for