I need php code for copy paste our all histroy of browser in a text page.

I need php code for copy paste our all histroy of browser in a text page can any one send me the code please.

You can use an application like GarageSale for doing this....
http://www.macupdate.com/info.php/id/16035/garagesale

Similar Messages

Urgently Need Code for Copy & Paste from Html Table in JSP to Excel file

I am creating a html table in JSP file .
I need code for 'Cut,Copy,Paste' functions ie. if someone wants to copy data from my table to excel file or from excel file to html table he shud be able to do that.
Can someone give me code for 'Cut,Copy and Paste' i.e. some javascript functions which can do cut, copy and paste which i can put in my jsp file
Thanks
Message was edited by:
javatechguru2007

package com.chinmayananda
public class Tetris{
// complete here
code]
public abstract class AbstractTetris {
public abstract void start();
public abstract void stop();
}nearly done

User presets for copy/paste function.

User presets for copy/paste function?
During an edit session, I am constantly switching to, and from copying: crop (only), and copying everything except "local adjustments" and "basic tone". I use a few other combinations as well. Switching between these involve a lot of tedious (& error prone) checking and unchecking of boxes. A preset option of some sort would help here.
What I do is edit one photo (in a string of similar photos), then copy it. Then select similar photos and auto sync them with the paste command, In an action sequence, the crop often needs to be done separate. Also the lens profile & calibration needs to be pasted separate if I happened to be switching between two camera/lenses.

Hi Per,
The below article will be helpful
Copy And Paste Data Between Excel Sheets Does Not Work When Smart View Add-In Enabled (Doc ID 1313584.1)
Thank you,
Charles Babu J

I Need Java code for following Algorithm

* I Need Java code for following algorithm. Kindly any one help.
1. Read the contents (ideas and its corresponding scores) from two files named as 'a' and 'b'.
2. Stored the file 'a' contents in array a[].
3. Stored the file 'b' contents in array b[].
4. compare both files like
if(a.equals(b[j])
Writing the common idea and add the score from file 'a' and 'b'.
else
write the uncommon idea and its score..
For example :
Form Agents.txt
action,65
architecture,85
eco-,15
essay,30
form,85
form,85
link,40
tangent,25
Form Agents1.txt
Black holes,69
essay,78
Herewith i have above mentioned two files named as Form Agents and Form Agents1.
Form Agents has eight fields
Form Agents1 has two fields
--> 'essay' is common in two files, so store the idea 'essay' and add the score from Form Agents score is '30' and Form Agents1 has 78 (essay 108).
Finally it stores idea in another file with uncommon fields also.
Please help us.

We have tried with following code.
But we cant add the scores.
For Example:
Form Agents.txt --> has "essay,30"
Form Agents1.txt --> has "essay,78"
Result is: essay,108
Finally it stores idea in another file with uncommon fields also.
So Any one pls correct the following code.
try
DataOutputStream o1=new DataOutputStream(new
FileOutputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\CandidateResponses\\Form
Agents.txt"));
//Reading the contents of the files
BufferedReader br= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Ideological\\Form
Agents.txt")));
BufferedReader br1= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Related\\Form
Agents.txt")));
while((s=br.readLine())!=null)
s1+=s+"\n";
while((s2=br1.readLine())!=null)
s3+=s2+"\n";
int numTokens = 0;
StringTokenizer st = new StringTokenizer(s1);
String[] a = new String[10000];
String[] br_n=new String[10000];
int i=0;
while (st.hasMoreTokens())
s2 = st.nextToken();
a=s2.substring(0,s2.length()-3);
s6=s2.substring(s2.length()-2);
br_n[i]=s6;
i++;
numTokens++;
int numTokens1 = 0;
StringTokenizer st1 = new StringTokenizer (s3);
String[] b = new String[10000];
String[] br1_n=new String[1000];
int j=0;
while (st1.hasMoreTokens())
s4 = st1.nextToken();
b[j]=s4.substring(0,s4.length()-3);
s7=s4.substring(s4.length()-2);
br1_n[j]=s7;
j++;
numTokens1++;
int x=0;
for(int m=0;m<a.length;m++)
for(int n=0;n<b.length;n++)
if(a[m].equalsIgnoreCase(b[n])){
int sc=Integer.parseInt(br_n[m]);
int sc1=Integer.parseInt(br1_n[n]);
int score=sc+sc1;
o.writeBytes(a[m]+","+score+"\n");
break;
else
o.writeBytes(a[m]+","+br_n[m]+"\n");
break;
}catch(Exception e){}

Need a code for Customer exit for extractor 0WBS_ELEMT_ATTR

Hi Guys,
I need a code for following requirement.
I have appended some fields to standard extractor 0WBS_ELEMT_ATTR which normally takes data from PRPS table. But the new fields will be getting data from PRTE and PROJ table. with common keys. Following is my code which is not working. Please help me out, I am not good in abap. Please note some lines are commented.
Thanks,
H
CODE:::::
form 0wbs_elemt_attr tables i_t_data structure biw_prps.
data: it_wbs_prps like biw_prps occurs 0.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps occurs 0,
         PSPNR like prps-pspnr,
         POSID like prps-posid,
         PBUKR like prps-PBUKR,
         IZWEK like prps-IZWEK,
         USR10 like prps-USR10,
         USR00 like prps-USR00,
         USR02 like prps-USR02,
         OBJNR like prps-OBJNR,
       end of it_wbs_prps.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps1 occurs 0,
          PSPNR like prps-pspnr,
          POSID like prps-posid,
        end of it_wbs_prps1.
data wa_prps1 like it_wbs_prps1.
data: begin of it_wbs_prte occurs 0,
          posnr like prte-posnr,
          PSTRT like prte-PSTRT,
          PENDE like prte-PENDE,
          ESTRT like prte-ESTRT,
          EENDE like prte-EENDE,
          ISTRT like prte-ISTRT,
          IENDE like prte-IENDE,
        end of it_wbs_prte.
data wa_prte like it_wbs_prte.
data: begin of it_wbs_proj occurs 0,
          PSPNR like proj-pspnr,
          PLFAZ like proj-plfaz,
          PLSEZ like proj-plsez,
        end of it_wbs_proj.
data wa_proj like it_wbs_proj.
refresh: it_wbs_prte, it_wbs_proj.
*it_wbs_jest.
if i_t_data[] is not initial.
Get data from PRPS WBS Master Data
     select pspnr posid PBUKR IZWEK USR10 USR00 USR02 objnr
       into corresponding fields of table it_wbs_prps
       from prps
        for all entries in i_t_data
      where POSID = i_t_data-POSID.
     sort it_wbs_prps by posid.
Get data from PRPS1 WBS Master Data
      select pspnr posid
       into corresponding fields of table it_wbs_prps1
        from prps
        for all entries in i_t_data
     where POSID = i_t_data-POSID.
    sort it_wbs_prps1 by posid.
Get data from PRTE Scheduling Data for Project Item
     if it_wbs_prps1[] is not initial.
     select posnr PSTRT PENDE ESTRT EENDE ISTRT IENDE
       into corresponding fields of table it_wbs_prte
       from prte
        for all entries in it_wbs_prps1
      where posnr = it_wbs_prps1-pspnr.
     sort it_wbs_prte by posnr.
     endif.
Get data from PROJ Project Master Data
     if it_wbs_prps1[] is not initial.
     select pspnr PLFAZ PLSEZ
       into corresponding fields of table it_wbs_proj
       from proj
       for all entries in it_wbs_prps
      where pspnr = it_wbs_proj-pspnr.
     sort it_wbs_proj by pspnr.
     endif.
loop at i_t_data.
   clear: wa_prps1, wa_prte, wa_proj.
   read table it_wbs_prps into wa_prps with key
              posid = i_t_data-posid binary search.
   read table it_wbs_prte into wa_prte with key
              posnr = wa_prps1-pspnr.
   read table it_wbs_proj into wa_proj with key
              pspnr = it_wbs_proj-pspnr.
         i_t_data-zzPBUKR = wa_prps-pbukr.
         i_t_data-zzIZWEK = wa_prps-IZWEK.
         i_t_data-zzUSR10 = wa_prps-USR10.
         i_t_data-zzUSR00 = wa_prps-USR00.
         i_t_data-zzUSR02 = wa_prps-USR02.
          i_t_data-zzPSTRT = wa_prte-PSTRT.
          i_t_data-zzPENDE = wa_prte-PENDE.
          i_t_data-zzESTRT = wa_prte-ESTRT.
          i_t_data-zzEENDE = wa_prte-EENDE.
          i_t_data-zzISTRT = wa_prte-ISTRT.
          i_t_data-zzIENDE = wa_prte-IENDE.
          i_t_data-zzPLFAZ = wa_proj-PLFAZ.
          i_t_data-zzPLSEZ = wa_proj-PLSEZ.
    modify i_t_data.
endloop.
endif.
endform.                    " 0wbs_elemt_attr

Hi,
it_wbs_prps1 .
If you are going to use this internal table to check for a null condition, shouldn't you first assign the data package to it?
For example,   it_wbs_prps1 = i_t_data[].
Because you are now using it_wbs_prps1 to select data from a table and it doesn't have any data.
Please check.
-RMP
Edit : Please ignore this. I didn't see that you are actually filling the internal table. Sorry!
Edited by: RMP on Oct 18, 2010 12:16 PM

Need a code for finding prime no.s from 0 to 100.

Hi,
i need a code for finding prime no.s from 0 to 100.
Please help me out.
Regards,
Santosh Kotra.

hai santosh,
here is an example program to find the prime number...........
EXAMPLE:
DATA: BEGIN OF primes OCCURS 0,
        number TYPE i,
        exp    TYPE i,
      END OF primes.
DATA: w_mult TYPE i,
      w_limi TYPE i,
      w_prem TYPE i.
DATA: w_outp TYPE text132.
DATA: w_rtime TYPE i,
      w_stime TYPE p DECIMALS 3.
DEFINE add_part.
sy-fdpos = strlen( &1 ) + 1.
&1+sy-fdpos(*) = &2.
condense &1.
END-OF-DEFINITION.
PARAMETERS: p_numb TYPE i,                "number to check
            p_fact TYPE c AS CHECKBOX,    "display components
            p_nbpr TYPE c AS CHECKBOX.    "nb of primes
START-OF-SELECTION.
GET RUN TIME FIELD w_rtime.
IF p_nbpr IS INITIAL OR p_numb LE 12000.
    PERFORM eratostene USING p_numb.
    add_part w_outp p_numb.
    READ TABLE primes WITH KEY number = p_numb.
    IF sy-subrc = 0.
      add_part w_outp 'is prime'.
    ELSE.
      IF p_fact IS INITIAL.
        add_part w_outp 'is not prime'.
      ELSE.
        add_part w_outp '='.
        w_limi = p_numb.
        LOOP AT primes WHERE exp GT 0.
          CHECK primes-number LE w_limi.
          IF w_prem GT 0.
            add_part w_outp '*'.
          ENDIF.
          IF primes-exp GT 1.
            add_part w_outp '('.
            add_part w_outp primes-number.
            add_part w_outp '^'.
            add_part w_outp primes-exp.
            add_part w_outp ')'.
          ELSE.
            add_part w_outp primes-number.
          ENDIF.
          w_limi = w_limi / ( primes-number ** primes-exp ).
          IF w_limi = 1.
            EXIT.
          ENDIF.
          w_prem = 1.
        ENDLOOP.
      ENDIF.
    ENDIF.
    WRITE: / w_outp.
    IF NOT p_nbpr IS INITIAL.
      DESCRIBE TABLE primes LINES sy-tmaxl.
      CLEAR: w_outp.
      add_part w_outp 'Number of primes:'.
      add_part w_outp sy-tmaxl.
      WRITE: / w_outp.
      SKIP.
      LOOP AT primes.
        WRITE: / primes-number.
      ENDLOOP.
    ENDIF.
ELSE.
    PERFORM factors.
ENDIF.
GET RUN TIME FIELD w_rtime.
w_stime = w_rtime / 1000000.
SKIP.
CLEAR: w_outp.
add_part w_outp 'Calculation time:'.
add_part w_outp w_stime.
WRITE: / w_outp.
      FORM eratostene                                               *
FORM eratostene USING in_number TYPE i.
DATA: BEGIN OF no_primes OCCURS 0,
          number TYPE i,
        END OF no_primes.
DATA: cnum TYPE i,
        dnum TYPE i,
        limi TYPE i,
        mult TYPE i,
        puis TYPE i,
        cmod TYPE i.
IF NOT ( p_fact IS INITIAL AND p_nbpr IS INITIAL ).
    limi = in_number.
ELSE.
    limi = sqrt( in_number ).
ENDIF.
cnum = 2.
WHILE cnum LE limi.
    READ TABLE no_primes WITH KEY number = cnum.
    IF sy-subrc NE 0.
      primes-number = cnum.
      mult = 2.
      puis = 1.
      dnum = mult * cnum.
      WHILE dnum LE in_number.
        READ TABLE no_primes WITH KEY number = dnum.
        IF sy-subrc NE 0.
          no_primes-number = dnum.
          APPEND no_primes.
        ENDIF.
        IF NOT p_fact IS INITIAL.
          cmod = dnum MOD ( cnum ** puis ).
          IF cmod = 0.
            cmod = in_number MOD ( cnum ** puis ).
            IF cmod = 0.
              primes-exp = puis.
              puis = puis + 1.
            ENDIF.
          ENDIF.
        ENDIF.
        mult = mult + 1.
        dnum = mult * cnum.
      ENDWHILE.
      APPEND primes.
      CLEAR: primes.
    ENDIF.
    cnum = cnum + 1.
ENDWHILE.
ENDFORM.
      FORM factors                                                  *
FORM factors.
DATA: ex_factors TYPE string,
        mod        TYPE i,
        still      TYPE f,
        factor     TYPE i,
        exponent   TYPE i,
        square     TYPE f,
        fac_string TYPE text40,
        exp_string TYPE text40.
IF p_numb LE 3.
    ex_factors = p_numb.
ELSE.
    factor = 2.
    still = p_numb.
    DO.
      CLEAR: exponent.
      mod = still MOD factor.
      WHILE mod = 0.
        exponent = exponent + 1.
        still    = still div factor.
        mod      = still MOD factor.
      ENDWHILE.
      IF exponent EQ 1.
        fac_string = factor.
        CONCATENATE ex_factors '*' fac_string
                               INTO ex_factors
                       SEPARATED BY space.
        CONDENSE ex_factors.
      ELSEIF exponent GT 1.
        fac_string = factor.
        exp_string = exponent.
        CONCATENATE ex_factors '* (' fac_string
                               '^'   exp_string ')'
                               INTO ex_factors
                       SEPARATED BY space.
        CONDENSE ex_factors.
      ENDIF.
      factor = factor + 1.
      square = factor ** 2.
      IF square GT still.
        EXIT.
      ENDIF.
    ENDDO.
    IF still GT 1.
      CATCH SYSTEM-EXCEPTIONS convt_overflow = 1.
        fac_string = factor = still.
      ENDCATCH.
      IF sy-subrc NE 0.
        fac_string = still.
      ENDIF.
      CONCATENATE ex_factors '*' fac_string
                            INTO ex_factors
                    SEPARATED BY space.
      CONDENSE ex_factors.
    ENDIF.
    SHIFT ex_factors UP TO '*'.
    SHIFT ex_factors BY 2 PLACES.
ENDIF.
WRITE: / p_numb RIGHT-JUSTIFIED.
IF ex_factors CA '*^'.
    WRITE: '=', ex_factors.
ELSE.
    WRITE: 'is prime'.
ENDIF.
ENDFORM.
HOPE THIS WILL BE HELPFULL.
regards
praba.

I need ready code for a simple paint program today

hi all I need ready code for a simple paint program today for me ics projct
plz give me a halp on this give me what you have with you and it is so good if it look like this :
Design a GUI based drawing Java application that works like a simple paint program
1-There should be a number of buttons for choosing different shapes to draw. For example, there should be a button for rectangle. If user presses the rectangle button, then he can draw a rectangle using mouse. Similarly, there should be a button for each shape(rectangle, circle, ellipse, and line etc.
2-The shapes can be filled with different colors.
3-There should be option of moving .
4- There should also be three menus including File, Shape, and Color menu.
i. File menu can have menu items New and Exit. If user selects New, the drawing area will be cleared and all shapes will be erased.
ii. Shape menu will serve the same purpose as of feature 2 described above. It will have menu items for drawing all the different shapes. For example, there will be menu item for rectangle; so user can draw a rectangle by selecting the menu item for rectangle.
iii. Color menu will serve the same purpose as of feature 3 described above. It will have menu items for all the colors which are shown in color buttons. The user can select a color from this menu and then click inside a shape to fill it with the selected color.

Read the Swing tutorial. There are sections on how to use menus and painting and all other kinds of stuff you need to do this homework assignment. Nobody here is going to write the code for you:
http://java.sun.com/docs/books/tutorial/uiswing/TOC.html

Why I need a code for rent a film and where ist the code? (I dont have a card)

Why I need a code for rent a film and where ist the code? (I dont have a card)

it's unclear what you mean
you say you dont have a card which I guess is you don't have a creditcard
in which case the other option is to pay by a giftcard which include a code which you put in
because to rent you have to pay otherwise it's not really renting

I need a code for verifiing my emailadress. How do get a new one ?

Photoshop Elements 12
Share
Try to send email directly from Photoshop elements
The program ask for a code to verifiing my emailadress
I need a code for verifiing my emailadress. How do get a new one ?

Check your email. The screen capture says that they sent one to the email address listed.

Need T.Code for "Classify G/L Accounts for Document Splitting"

Hi All,
I need the T.Code Document Splitting "Classify G/L Accounts for Document Splitting"
Menu Path is:
IMG-Fin. A/c- General Ledger A/c- Business transaction - Document Splitting - Classify G/L Accounts for Document Splitting
Thanks & Regards,
Mohan.

Need T.Code for "Define Document Splitting characteristics for G/L Accounting and
Define Document Splitting method

Hello sir,i need labview code for a code which is written in matlab,latter one is attached with this message.

hello sir,i need labview code for a code which is written in matlab...
clc;
close all;
clear all;
Ez= zeros(1,200);
Hy=zeros(1,200);
Ca=1;
Cb=.4519;
n=1;
while(n<1500)
for k = 2:200
Ez(k)=Ez(k) + Cb*(Hy(k)-Hy(k-1));
end
Ez(1)=1;
for k=1:199
Hy(k)=Hy(k)+Cb*(Ez(k+1)-Ez(k));
end
plot(Ez,'b')
hold on
plot(Hy,'r')
hold off
pause(0.001);
n=n+1;
end
thanku

Well, this code is quite trivial and if you have to learn LabVIEW anyway, you might as well try to implement it.
A few things to remember:
The first array element in LabVIEW has index #0, while in matlab it has index #1, so everything dealing with array indices needs to be adjusted slightly.
The zeroes function equivalent is "initialize array".
Keep the array in a shift register as you update elements.
use FOR loops.
Use one of the graphs to display the data.
LabVIEW Champion . Do more with less code and in less time .

I need activation code for my ipad

PLeas i need activation code for my ipad becouse i cant open it ana i know the apple id and password

Only the person who initiated the Activation Lock can remove it. if purchased used/2cd hand,
contact the seller for assistance. This is what they need to do:
Prepare your device to sell or give away
If seller refuses or cannot be contacted, the iPad is useless. There is no workaround for
Activation Lock.
iCloud: Find My iPhone Activation Lock in iOS 7 & later
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/TS4515
If you are the original purchaser, gather up proof of purchase and take that proof + the iPad
to a physical Apple store where they may be able to assist you.
What is the exact complete wording of the error message you are receiving?

I need java code for chating application

i need java code for chating application. plz help me

GANGINENI wrote:
i need java code for chating application. plz help meGIYF.
[http://today.java.net/pub/a/today/2006/10/05/instant-messaging-for-jabber-with-smack.html|http://today.java.net/pub/a/today/2006/10/05/instant-messaging-for-jabber-with-smack.html]
File under: lern2Google

Needed a code for Creating a Log File in java so that its size is limited

Hi
I need the code for developing a log file using threads so that the log file size is limited
and if the size of the log file is increasing above 1Mb,another log file has to be created automatically and the log have to be printed into that new file.
Thanks in advance

package cms.web.log;
import java.io.*;
import java.util.Calendar;
import cms.web.WebUser;
*     Log is generated by JEditor 1.0.0
*     @Project      : cms
*     @Version      : 1.0.0
*     @Created date : 11:07:40 PM Thursday, 25/07/2002
*     @Author       :
*     @Organization :
*     @Copyright    : (c) 2002
*     An utility class used to write information, especially error messages, to
*     log file so that they can be viewed at later time by administrators.
*     Extra information such as date & time they occures & where they are thrown...
*     are automatically included and append to the end of log file.
*     Log files will increase with the format "name_n" where n is file counter
public class Log implements Serializable
      *     logs marker
     static final String START= "\n\0";
      *     parent directory that contains log files
     private static File parent;
     private PrintStream out;
     private String name;
      *     to count how many log for the current stream
     int counter;
      *     maximum number of logs for each log file
     int max;
     public static void init(File parent)
          if (!parent.exists())
               parent.mkdirs();
          Log.parent= parent;
     public Log(String name, int max)
          this.name= name;
          this.max= max;
          file= getLastFile();
          counter= countLogs(file);
          out= openStream(file);
     public synchronized void appendLog(String log)
          if (log == null || log.length() == 0)
               return;
          count();
          try {
               out.println(START+ counter+ " | "+ getCurrentTime()+ " | "+ log);
               out.flush();
          } catch (Exception e) {}
      *     Append the given log to log file.
     synchronized void appendLog(String msg, WebUser user)
          if (msg == null || msg.length() == 0)
               return;
          count();
          try {
               out.println(START+ counter+ "----------------------------------------------------------");
               out.println(getCurrentTime());
               out.println(user != null? "User:"+ user.getFullName(): "User: public user");
               out.println(msg);
               out.println("\n----------------------------- end -----------------------------\n");
               out.flush();
          } catch (Exception e) {}
      *     Append the given exception to log file
     synchronized void appendLog(Throwable error, WebUser user)
          if (error == null)
               return;
          count();
          synchronized (out)
               try {
                    out.println(START+ counter+ "----------------------------------------------------------");
                    out.println("Exception occured at "+ getCurrentTime());
                    out.println(user != null? "User: "+ user.getFullName(): "User: public user");
                    error.printStackTrace(out);
                    out.println("----------------------------- end -----------------------------\n");
                    out.flush();
               } catch (Exception e) {}
     private String getCurrentTime()
          Calendar c= Calendar.getInstance();
          return
               parse(c.get(Calendar.HOUR_OF_DAY))+ ":"+               // 0 --> 23
               parse(c.get(Calendar.MINUTE))+ ":"+                     // 0 --> 59
               parse(c.get(Calendar.SECOND))+ " "+                     // 0 --> 59
               parse(c.get(Calendar.DAY_OF_MONTH))+ "/"+                // 1 --> 31
               parse(c.get(Calendar.MONTH)+ 1)+ "/"+                     // 1 --> 12
               c.get(Calendar.YEAR);                                        // yyyy
     private String parse(int n)
          return n< 10? "0"+ n: ""+ n;
     private void count()
          counter++;
          if (counter> max)
               incrementFile();
               counter= 1;
     private void incrementFile()
          File file= null;
          int n= 0;
          while ((file= new File(parent, name+ n+ ".log")).exists())
               n++;
          if (out != null)
               out.close();
          out= openStream(file);
     private PrintStream openStream(File file)
          try {
               if (file.exists())
                    return new PrintStream(new FileOutputStream(file.getPath(), true));
               else
                    return new PrintStream(new FileOutputStream(file.getPath()));
          } catch (IOException e) {
               throw new RuntimeException(e.getMessage());
     private int countLogs(File file)
          int count= 0;
          InputStream in= null;
          try {
               in= new FileInputStream(file);
               int n;
               while ((n= in.read()) != -1)
                    if (n == '\0')
                         count++;
          } catch (IOException e) {
          } finally {
               if (in != null)
                    try {
                         in.close();
                    } catch (IOException e) {}
          return count;
     private File getLastFile()
          File file= new File(parent, name+ "0.log");
          File curr;
          int n= 1;
          while ((curr= new File(parent, name+ n+ ".log")).exists())
               file= curr;
               n++;
          return file;
     protected void finalized()
          if (out != null)
               out.close();

SharePoint 2013 Open with Explorer View Requirement of Permissions for copy / paste

Hi,
I have a scenario, where I have a document library and it resides in the top level site of the site collection. I have another document library in one of the subsites. What I am trying to do is:
Use Explorer View in the top-level site's document library to copy / paste into Explorer View of the document library in the subsite.
I can't seem to do it. Does it require owner permissions to do so?
Can anyone list the limitations of using explorer view for copy/paste?
techie

Hi,
SharePoint maintain the same access restriction in windows explorer view as it is in web UI. That means if user has contributor permission the he/she will be able to contribute in windows explorer view as well. By default windows explorer view is available
to every users in SharePoint.
Are you getting error message while opening windows explorer view for any document library? Windows explorer view only works in Internet Explorer currently other browsers doesn't support Windows Explorer view.
Here are couple of article on troubleshooting windows explorer view:
Office 365: https://support.microsoft.com/en-us/kb/2629108?wa=wsignin1.0
There are multiple fix available for different Windows OS and version of IE you are using.
.Net Devoloper

I need php code for copy paste our all histroy of browser in a text page.

Similar Messages

Maybe you are looking for