I need Printer Software for Canon PIXMA MP600

I have just replaced my startup hard drive. I installed OS X 10.10.2 and then migrated everything from Time Machine that I had backed up from my failed start up disk. Now I get an alert that software is not available for this printer. Canon says me that they do not provide the driver, but when I try to set this printer up in system preferences, I get an Alert message "The software for this printer is currently unavailable. Please contact the pritner's manufacturer for the latest software." The available Gutenprint software does not implement all the features of this printer.
This printer is available on my network through my Airport Extreme Base Station. My other iMac, also running Yosemite, prints apparently has the correct software and prints as expected.

http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

Similar Messages

Yosemite printer driver for Canon Pixma IP3000

This is not so much a question as a solution to getting my old Canon Pixma IP3000 working again after upgrading to Yosemite.
Although the printer is listed, when I wanted to add it I found no software for it from Apple. Phoning Canon they also said they have no software for the IP3000 and Yosemite. To make a long story short, after much trial and error trying out other drivers which were listed on "choose driver" I found that the IP4500 driver can be configured for cassette feed AND duplex and works on Yosemite. Hope this helps someone else to keep some of the older products going in our throw away society!

I just installed that driver on a 10.10 VM and also found that there is no Duplex Print & Margin menu - just Margin.
I then installed it on a 10.8 VM to be sure the lack of the menu was not due to using the 10.8 driver on 10.10. However I found that even on 10.8, there was no Duplex Print & Margin. So it would seem that duplex printing was not an option for the iP3500.
I then checked an alternate driver suite called Gutenprint and added the iP3500 Gutenprint printer. It also did not support the ability to print duplex.
But when I added another printer, this time using the Gutenprint iP3000 driver, there was the ability to print two sided from the Layout menu. So then I thought it might be worth checking if the Canon iP3000 driver also provides a duplex setting, but the last supported OS for this model was 10.6 so I did not even try to install that old driver on 10.10.
Here is a link to the Gutenprint driver if you would like to try that.

IMac says it has no software for Canon Pixma MG7520. Suggestions?

I'm trying to install a new printer - Canon Pixma MG7520 but iMac says it can find no software for it. Anyone have a suggestion?

Install the Apple package of Canon printer drivers: Apple Canon Printer Drivers 3.2. Check this list of supported drivers to be sure your printer model is supported: OS X- Printer and scanner software available for download.

Where can I find a printer driver for Canon Pixma iP6600D? I have Mac OS 10.9.2

I have a great printer Canon Pixma iP6600D, still works great. I want to either download a printer driver or I want to learn how to transfer the driver from my Mac desk top. If I knew where to find the driver I could just manually transfer it from my desktop to my laptop. Both are running maverick.
Can anyone help me?

The last driver that Canon released for the iP6600D was v10.51 for OS X 10.7. You could try downloading and installing this driver via this link.
Note that the driver may not be digitally signed so Gatekeeper will block its installation. To get past Gatekeeper, you can right-click on the installer and select Open from the pop-up menu that appears. You will then be given the option to install the driver.

Need printer driver for Canon imageclass D320

Anyone direct me to a printer Driver for the Canon Imageless 320?
Canon support says none available.
Macbook pro under Yosemite.
thanks

Canon never made an OS X version of its proprietary driver "CARPS" that is used by the D320. And the Canon driver link provided above is just for Canon inkjets - there is no support for your model.
If you want to print to the D320 from the Mac, you would need to install a virtual machine application like VMware's Fusion and then load Windows 7 into the VM.

Printing on a Canon Pixma MP600 via Airport Express from a Windows 2000 PC

Hi, I'm a Mac: I can print directly connected AND wirelessly to a Canon MP600 printer through Airport Express.
Hi, I'm a PC: I can only print when I'm directly connected to the printer.
Has anyone found a way to print to their Canon through Airport Express?

Try these instructions first: http://www.ifelix.co.uk/tech/1006.html
Another route is to use Bonjour for Windows to be able to access the printer attached to the AirPort base station from your PC.
In addition, not all USB printers work with AirPort base stations for sharing. The following iFelix link provides an "unofficial" list of known compatible printers...and some workarounds.

Quick Menu Software for Canon PIXMA MX452

Whenever I click on the Quick Menu program for the subject product, I get the following error message:
Canon Quick Menu has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I have uninstalled and reinstalled the driver and Quick Menu software several times, from both the disc provided and on-line downloads.
I have turned off my anti-virus/firewall program and also told the security program that the Canon program is a trusted application.
I am able to print/scan/copy, but not from the Quick Menu, which is more convenient.
Please help.
Solved!
Go to Solution.

Hi clarkdjensen,
There may be a third party scanner driver interfering with Quick Menu. Please try the following:
1. Click 'Start' and then 'Computer'.
2. On the left-hand pane, click the down arrow beside Local Disk (C: ).
3. Click the down arrow beside Windows to open the folder
4. Highlight the twain_32 folder.
5. The folder should have 2 folders that start with PIXMA MX452 and a file called wiatwain.ds. Any other folders or files should be dragged to the desktop.
6. Reboot the computer and try scanning again.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

I wasn't aware that VueScan charged a yearly license.
You simply launch Image Capture and if the scanner is recognized it will be listed in the SHARED list in the left display column. Select the scanner name and the app will start an overview scan. You will also see a list of scanning options in the right display column (resolution, paper size, file output format, etc.
The above description is when everything is working correctly, which has been the case for me.
Good luck.

Tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"

tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?

This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody.

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
It does not look like the Canon driver has change from Mavericks to Yosemite.
If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
If you have a new or clean install of Yosemite, see > OS X Mavericks: Set up a printer

Printer profile for Canon inkjet

I am having a bit of trouble getting my printer to render colours satisfactorily.
My printer is a Canon Pixma iP 3600 but I am not sure which settings give optimum results from Illustrator RGB files.
1) Should I specify a colour profile for Illustrator or is Emulate Adobe Illustrator o.k.?
2) Is there anything else I should do if I use Indesign for output?
3) When I go to print, Color Management in the Print dialogue gives me various Printer Profile options, including:
Does anyone know which of these Canon iP3600 series profiles works (or is supposed to work) best? (I have had dismal results using Adobe RGB and can find nothing about profiles in the printer handbook. For example, I don’t know the difference between MP2, PR1, PR2 etc.)
As for Rendering Intent, it is important in this case that colours reproduce as accurately as the printer will allow. My instinct tells me to use Absolute Colorimetric because I have adjusted the colours in my files very carefully.

Steve,
Have you tried a custom RGB test sheet (maybe with notes on settings written into it for each combination) and a waste of raw materials?

Software for Canon PowerShot S400

Hello,
I went to the Canon site to find a download to get my digital camera and MacBook to get connected. I am having a hard time figuring out which one to download. The ones that I download seem to not work. Please help! Thanks.

volleyball1979
Welcome to the Apple Discussions.
You don't need extra software for the S400. However, the Canon cameras will not show up on the desktop, so you need to use Image Capture (in your Applications Folder) to get pics from the camera to the HD. AN alternative is to use a USB card reader.
Regards
TD

I am trying to setup air print with a canon PIXMA iP7250 and win 7 64bit

I am trying to setup air print using a canon PIXMA iP 7250 printer and win 7 64bit

Did you read the instruction manual?
http://www.canon-europe.com/Support/Consumer_Products/products/printers/InkJet/P IXMA_iP_series/PIXMA_iP7250.aspx?faqtcmuri=tcm:13-982915&page=1&type=faq

HP Print Software for MacBook Pro and Windows 7 gone awry on HP OfficeJet Pro 8600

Almost one year ago today I wrote a post about my first problem with HP OfficeJet Pro 8600 N911. Today I write my last.
I have an HP OJP 8600, with option Tray 2 included, and auto feed included. My system test computers are:
1. Apple MacBook Pro, OS X 9.5, HP software is the only 3rd party software.
2. HP Laptop, Windows 7.
The OJP wireless radio gave up, so I cannot run it wirelessly. It is connected by ethernet to my router. All five of my computers can use. All of the functions of the printer are usable. For example: it prints, it scans, it copies, it faxes. All functions working. My problem is with the HP software download to the Apple and to the HP Laptop.
I would like to be able to use all of the feature settings when I print. But alas, I cannot. Both the Apple and the HP Laptop have a similar appearing window that opens when you choose to print something. In theory, you are supposed to be able to control a range of paper types and quality, print type and quality, and (in my case with the two trays) what tray to use to select the paper.
I regret neither of the computers perform these functions. And all of the mistakes that I find on the Apple computer I find on the HP Laptop Windows 7 computer.
I don't have the time to test every combination. But I think the table below will help you get an idea of what the problem is with the software that HP sends offshore for maintenance.
The results of the paper quality selection, the print quality selection, and the tray availability are as follows:
PAPER PRINT QUALITY TRAY AVAILABILITY
Plain Paper
Plain Paper DRAFT/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2
Thick Paper DRAFT gray/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2 gray
HP Bright DRAFT/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2
InkJet
Other DRAFT gray/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2 gray
HP Bright DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
Specialty
Other DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
Card   DRAFT gray/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2 gray
Brochure
HP Brochure DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
Other DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
In summary the new HP Print software for Apple and Windows 7 computers has identical programming mistakes on both operating systems. Under no circumstances can I use the MAX DPI setting.
The user cannot use the features that are built in to the HP software because the paper selections override the locked tray, the print quality, and the unusually small list of HP selection of papers.
It is time to invoke my warrenty rights. There are too many systemic problems with the software and the device. I don't have any more time to act as an unpaid system test analyst for HP.
Who do I contact to use my warrenty before it runs out in a few weeks?

Hi,
Those are not programming mistakes, but those are limitations of the product, please check the printer specifications below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&tmp_track_link=ot_faqs/top_issues/en_u...
As you may find under Paper-handling specifications > Paper tray capacities, Tray 2 only support Plain Paper.
Maximum DPI is only only supported on Photo Paper, therefore those limitations are applicable.. these limitations are also listed on the Printing Specifications section above, Maximum DPI is listed as 4800 by 1200 dpi:
Color print resolution: HP enhanced photo quality with Vivera inks (up to 4800 by 1200 dpi Optimized on HP Premium Plus photo papers with 1200 x 1200 input dpi)
As well that can be find listed within the Print photos on photo paper or the Print borderless documents sections, you may simply search for Maximum DPI within the user guide as a reference:
http://h10032.www1.hp.com/ctg/Manual/c03026243.pdf
Those are not an issues with the printer but those expected limitations fully meet the product specification.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I need Printer Software for Canon PIXMA MP600

Similar Messages

Maybe you are looking for