I need repair pst in my mail faster

I try to import pst file, but it says "invalid file format." File - .pst. Why I can't open file? I need repair pst in my mail faster.

Based on the error information, your PST file should be corrupt or damaged. You should first check the size of the PST file,
1. If PST file size is 0. Then your PST file does NOT contain any recoverable data. You should check the source of the PST file and make another copy, or obtain a backup from your backup media. If you cannot get another copy, then you can find
out the media where you have stored your PST file in the past, for example, an external USB drive, and try
DataNumen Outlook Drive Recovery to scan and recover the data from the drive directly.
2. If PST file size is not zero, then it is still possible that some data are existing in your PST file and you can recover them.
There are a lot of online resources discussing about how to recovering corrupt or damaged PST files.
First, the Microsoft offical tool scanpst, also called Inbox Repair Tool, can repair the PST file, you can refer the following articles:
http://office.microsoft.com/en-001/outlook-help/repair-outlook-data-files-pst-and-ost-HA010075831.aspx
http://support.microsoft.com/kb/272227
https://support.microsoft.com/kb/287497
Second, a lot of Outlook MVPs also discussing this topic on their own websites:
http://www.msoutlook.info/question/77
http://www.slipstick.com/problems/pst-repair/repair-a-damaged-personal-folders-pst-file/
Third, there are many third-party Outlook recovery tools you can try, below is a list of them:
http://www.datanumen.com/outlook-repair/compare.htm
Nearly all these tools provide a free trial so you can try first to see if a tool works before purchase it.
Good luck!

Similar Messages

  • New-MailboxExportRequest gives PSTs which need repairing

    Hi,
    We're currently exporting a large number of mailboxes to PST in preparation for an Office 365 migration using the New-MailboxExportRequest command as follows: New-MailboxExportRequest -Mailbox $username -ContentFilter {Received -lt $date } -BadItemLimit
    50 -FilePath \\servername\archives -MRSServer CAS1
    This works however the archives contain a large number of corrupt items (in the hundreds) and need to be repaired using PST repair tool.
    How can we prevent this from happening?
    Thanks,
    Bryan

    Hi,
    First of all, New-MailboxExportRequest cmdlet will not cause items corruption.
    We can set the BadItemLimit parameter to more than
    50 with AcceptLargeDataLoss
    parameter. The valid input range for this parameter is from
    0 through 2147483647. If we set the value to more than 50, the value should be around the number according to the numbers of corrupt items. But
    any corrupted items aren't available after the process is complete. Apart from this, there is no way to prevent New-MailboxExportRequest from giving PSTs which need repairing based on my knowledge.
    If these corrupt items are very important, I don’t recommend this operation. And I suggest to use PST repair tool to repair corrupted items after we use New-MailboxExportRequest function.
    Best Regards.

  • Urgent help needed with un-removable junk mail that froze Mail!!

    Urgent help needed with un-removable junk mail that froze Mail?
    I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
    When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
    I repaired permissions, it did nothing.
    I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
    Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

    Hi Nigel
    If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
    Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
    If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
    The shift key starts Mail in a sort of Safe mode.

  • HD needs repairing but optical drive NOT reading discs.

    My problem is this: I have a June 2010 21.5" iMac which is out of warranty.   Disk utility says my HD needs repairing.  No problem, I have the original install DVD.   Trouble is my DVD drive has suddenly stopped reading discs! I rand Apple tech support for help and I asked them if I could simply buy a usb external DVD drive and re-install that way? Since I will also have to reinstall from DVD; Logic and Pro-Tools.   He said no!   Consequently I'm booked in for repair next week at an Apple store.
    Is that a way of Apple making money and I CAN actually repair the HD via an external usb hard drive??  Did he convince me to take it to an Apple store so they gain cash from me that way?
    Do I take it in for repair?  The Apple Tech Support guy gave me no clue as to how much this is going to cost.
    Or don't take for repair and buy an external usb DVD drive?
    I struggle with computers at the best of times!
    Any help greatly appreciated.

    I've used ancient Compaq "Multi-bay" external drives and a variety of other random-vendor external USB drives with Apple laptops and Apple servers, and they've worked.  In several cases, I was using the old Compaq drives because the integrated DVD drivers were dusty or had failed — DVD drives of all sorts can and do fail, Apple, third-party and otherwise — and the Compaq drives were handy.  That Compaq Multi-bay drive booted an Apple Xserve Intel box with a bad slot-loader, too. 
    If one drive fails, debugging suggests trying a different drive.
    If you don't want to be concerned about compatibility, order one of those (not cheap) Apple external DVD drives.  I now have a couple of those around, and they work.
    It's quite true that newer Apple laptops don't have DVD drives, though most of these systems offer a recovery partition on the disk, the ability to create external recovery partitions on the device of your choice, newer ones have Internet-based recovery if you're lacking a drive (booting from Apple's servers via the Internet), and the Mac boxes I've tried will boot from various random USB devices including the old other-vendor DVD drives, and from the Apple external DVD drives.  With another Mac with a compatible wiring connection (Thunderbolt and cable on newer Mac systems, and FireWire and cable with a pair of older Mac systems), Target Disk Mode (TDM) can be used.  The installations can also be copied to other hard disks, and it's also possible to network-boot most any Mac system, if you have a server around.  And there's also the remote disk installations that some Mac systems can offer.   Put another way, there are various and good alternatives to device-integrated DVD drives.
    DVD is an old and mechanical technology, and it's variously a flaky one.  Given a choice, I'd rather boot OS X off an external hard disk or solid state or flash device or via TDM, just because it's faster and more compact.  This because I'd rather not carry around the weight and volume of that DVD drive all the time, on the off chance I might sometime eventually need to recover.  But an external random DVD device does work, too.
    As was mentioned else-thread, there is no special chip required in the drives.  Given the command set and status-level differences from drive to drive I've seen and given the failure rates I've witnessed with DVD and CD drives from all vendors including Apple, I wouldn't expect every drive to work, but I've seen nothing that Apple does here that would prevents a random drive from working.  And I've used random drives...

  • Disk Permissions constantly need Repair

    Hi,
    I've just upgraded to 10.6.5 and noticed that each time I log in, my disk permissions need repair. I've updated everything, but still seem to have permissions problems. Any help would be appreciated. These are the errors.
    Many thanks!
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar".
    User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist".
    User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries".
    Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl".
    Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl".
    Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl".
    Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar".
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0.
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist".
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0.
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0/libprofilerinterfac e.sl", should be -rwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0/libprofilerinterfac e.sl".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0w/libprofilerinterfa ce.sl", should be -rwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0w/libprofilerinterfa ce.sl".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0/libprofilerinterfac e.sl", should be -rwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0/libprofilerinterfac e.sl".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0w/libprofilerinterfa ce.sl", should be -rwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0w/libprofilerinterfa ce.sl".

    Yeah, that advice is all over the place. It certainly won't hurt. But the benefits of doing it are, IMO, greatly exaggerated.
    Repairing permissions can be a useful task if you are having a problem that can be traced to incorrect permissions on an application, folder, or file that is installed with the Mac OS X installer. Because those are the only things (and only a subset of those at that) that repairing permissions fixes.
    But somewhere along the line, people starting using Repair Permissions as some sort of magic pill that can fix any ailment. Computer slow? Repair permissions. Screen flickering? Repair permissions. E-mail message won't go on the trash? Repair permissions. That advice is handed out (ill-advisedly IMO) on a daily basis on these forums. And, of course, there are those who advocate repairing permissions both before and after any system update. IMO that advice too is based on urban legend. I never do it.
    If you do repair permissions, and it finishes with "Permissions repair complete", then it's done and you don't need to worry. The "errors" it returns are not errors at all and nothing needs to be fixed. They're just "messages", not errors. If you don't want to see them, simply uncheck the "show details" box.
    If Repair Permissions finishes with "permissions repair failed", or "the "underlying task reported failure on exit", then worry.

  • Unable to 'Verify Disk'...Needs Repair

    Good morning.
    I have a late 2008 MacBook Pro. About a month ago I installed Snow Leopard 10.6.3.
    After the install I noticed things running a little more sluggishly than Leopard 10.5.8. I went to verify the disk and noticed some needed repairs. See this grab:
    [IMG]http://i53.tinypic.com/2edz6gl.jpg[/IMG]
    I have now been through this process three times and am wondering what is going on. Why does my disk keep experiencing these issues?
    Any ideas? Do I have corrupted files somewhere, a bug, a virus or just plain bad luck?
    Any thoughts welcomed.
    Cheers,
    BurntMonkey

    If Disk Utility can't fix it, you'll need a more robust utility to repair it.
    I would recommend DiskWarrior. It is the best at directory repairs. It rebuilds then actually replaces your old directory. I feel every Mac owner should have a copy.
    It also has File System repair now and hard drive S.M.A.R.T. diagnostics.
    Make sure you get the disk so you can boot up on it to run repairs. You can also install it on another drive and run it from there to repair this one. DW works faster that way.
    I use DW once a month to try and catch errors in my system from getting too far out of hand. It has repaired every little and big issue I have ever had with my three Macs.
    If you have a good backup, hopefully a clone of your system before you had issues, an Erase and Install will also rid you of this issue. But, beware! You will lose everything on the drive with this procedure. Let us know if you need help with that!
    Good Luck! DALE

  • Outlook pst to mac mail mbox

    How can I transfer outlook pst files to mac mail in mac book pro. I have a few thousand email files that are saved in outlook 2010. The over all properties of these emails is 12 GB and that amount of files cant be imported via IMAP. So I need some direct
    solution that will allow me to export all these email files from outlook 2010 to mac mail saving all the data present in the outlook 2010 in mac mail. 
    All the answers will be appreciated. Thanks

    There was a app mentioned in the discussion here, I hope you will find it helpful
    http://community.office365.com/en-us/forums/158/p/191417/564208.aspx#564208
    Or you can simply find some nice options here:
    Convert
    pst to mac mail
    Thanks

  • Pst to mac mail

    Hi ,
    Recently i brought a macbook pro, Now i need to shift my all mail accessing in mac mail.
    Can help me to solve this..
    Pst to Mac mail.
    Awaiting for a easy method.
    Thanks n Regards
    Dinesh.N
    MacBook Pro (13-inch Mid 2012), OS X Mountain Lion (10.8.4)

    Cheapest solution (not free) -> https://itunes.apple.com/us/app/pst-converter-pro/id446401009?mt=12.
    Clinton

  • Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

    Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

    Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck.  As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.”  As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#.  Right after the root# prompt, enter the following: /sbin/fsck -fy
    If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

  • I need to change my e-mail address in the app store to enable me to get updates and buy more. How does this happen??

    I need to change my e-mail address in the app store, how does that work??

    On apple website, seraching on support, the article HT1918 explains.
    Log into your apple ID and edit your personal information, where email can be changed as well. All applications as itunes stores, apple store and icloud use this same apple ID, so be aware of this.
    I hope I was helpful !

  • My back up is not working. I get a error message, "internal disc needs repair" Any idea what this means?

    Hi, as above, back up not working, message "internal disc needs repair". Can somebody help with the meaning of this.
    Thank you.

    click "utilities folder">open "disc utility" click on your disc> click "repair disc" in the lower right hand corner 

  • Mac Pro Slow Shutting down Disk Ut says needs repair

    Hi hope someone can help,
    My mac pro has been taking a long time to shut down recently and this morning when i booted up all i had was a black screen with my mouse pointer (really weird).
    I used Disk Utility to "verify disk" and it said that repairs were necessary. Here's the log:
    Aug 24 08:31:55: Disk Utility started.
    Verifying volume “Aygies Raid”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Incorrect block count for file PACESupport.plist
    (It should be 0 instead of 1)
    cking multi-linked files.",0)
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    @ needs to be repaired.",1)
    Aygies Raid
    Error: The underlying task reported failure on exit
    Disk Utility stopped verifying “Aygies Raid” because the following error was encountered:
    The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    I have a clone of my drive on an external drive so i booted from that i tried to repair permissions on mac pros drives but it said repairs weren't needed, Log:
    Verifying volume “Aygies Raid”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    The volume Aygies Raid appears to be OK.
    Mounting Disk
    1 HFS volume checked
    Volume passed verification
    But then i booted from the mac pro again and it said that it needs repair! I used disk warriour and this is its log:
    DiskWarrior scanned the disk named "Aygies Raid" checking all files and folders for damage and potential
    compatibility problems.
    Permissions:
    Started verify/repair permissions on disk disk2 Aygies Raid
    Determining correct file permissions.
    The privileges have been verified or repaired on the selected volume
    Verify/repair finished permissions on disk disk2 Aygies Raid
    Disk: "Aygies Raid"
    The Property List data was checked in 17,785 files.
    The Resource Data was checked in 9,721 files.
    The maximum Folder Depth on this disk is 17. This does not exceed the maximum recommended depth.
    The System Symbolic Link Files were checked and no problems were found.
    Location: "Desktop"
    File: ".a23t.obdev.LSD.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character
    at line 1
    Old-style plist parser error:
    Unexpected character '0x4' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    File: "com.SysternatemsCorporation.StudioExcellence.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character at line 1
    Old-style plist parser error:
    Unexpected character '0x0' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    File: "com.EtworataCorporation.Zonesys.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character at line 1
    Old-style plist parser error:
    Unexpected character '0x0' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    File: "com.AppersEurope.Sickle.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character at line 1
    Old-style plist parser error:
    Unexpected character '0x0' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    File: "com.Roverbetter.Eclecticism.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character at line 1
    Old-style plist parser error:
    Unexpected character '0x0' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    File: "com.Hostcyte.Craziness.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character at line 1
    Old-style plist parser error:
    Unexpected character '0x0' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    Explanations:
    Folder Depth: This number indicates how many folders are nested inside each other. If a disk contains only three
    folders and Folder A is inside Folder B and Folder B is inside Folder C, then this disk has a maximum folder depth of
    three. Folders nested too deeply can cause software compatibility problems.
    Property List: This is a standard file format for storing data and is often used to store preferences. The names of
    these files normally end with a .plist file extension. Corrupt property list files can cause system instability.
    Resource Data: This is an older file format for storing data and was often used to store preferences. The names of
    these files normally end with a .rsrc file extension. Corrupt resource data files can cause system instability.
    System Symbolic Link Files: These are files used by the operating system that are similar to aliases. If these files are
    damaged it may prevent startup or cause system instability.
    Time: 24/8/07 08:44:56
    DiskWarrior Version: 4.0
    Went back to Disk utility and now it says that my hard drive doesn't need repair! whats going on! can anyone help?!
    Thank you

    Two things off the top:
    128MB are GUID partitions that are not user volumes.
    There is also a 200MB EFI partition as well.
    Drive Genius needs to get their program updated.
    You need to work from an "emergency" boot drive to repair your boot drive, RAID or no. I hope you are and not from CD or DVDs.
    Forget about Permissions. They are very minor. They only have to do with ownership and security and based on what is in
    /Library/Receipts
    Trying to verify? all you want to do is repair and rebuild.
    If you ran DU and DW and did repair and rebuild and WROTE NEW DIRECTORY and the problem remains, erase and restore, or...
    +I am useless with RAID and have no idea...+
    Don't use it except to test, learn, experiment with. But not for system drive.
    Above I asked, "are these a matched pair of drives" ie, same make, (looks like same size), vendor, model? they should be. Less chance of trouble if nothing else.
    ON the boot volume, do a Get Info when you click on the drive, look for "Ignore Ownership on this Volume" and make sure it is NOT CHECKED. It can't be to repair permissions and be bootable.
    The underlying cause of disk errors may be marginal or bad RAM. Test those FBDIMMs. Run Apple Hardware Test and Memtest (even Microsoft uses Memtest for Vista).
    Drives rarely break. Systems do. Directory and btree catalogue and volume information blocks do.

  • After upgrade to Leopard OS thinks my External Hard Drive Needs Repairs

    After I upgraded to Leopard on my POWERBOOK G4, on startup with my Seagate External HD 400GB (ST3400601-CBRK)hooked up with Firewire, The OS displays a message DISK REPAIR and locks the Seagate giving me "limited fucntionality," basically I can't use it.
    If I run Disk Utility, I don't get the repair option, only verify. When I hit "verify" it tells me it can't do anything because the disk needs repairs.
    On the Seagate already is an eDrive Partition with TechTool Platinum It shows everything is fine The Disk in 100% good shape - no fragments, The Files and Finder index are all fine.
    Does anyone have an idea what's wrong?

    Zap the PRAM and Reset the SMC, then try again. If the problem remains, update to 10.6.8 and repeat.

  • Disk Utility: "Volume needs repair" - what to do?

    I just ran Verify Disk and got this result:
    Verifying volume “iBook HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Incorrect block count for file Database3_BROKEN-journal
    (It should be 25 instead of 0)
    0
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking Extended Attributes file.
    ,1)
    1733913 /Library/Logs/Console/501/console.log.0
    Overlapped extent allocation (file 1734737)
    Checking volume bitmap.
    Volume Bit Map needs minor repair
    Checking volume information.
    Invalid volume free block count
    (It should be 8593446 instead of 8593471)
    The volume iBook HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    How do I repair this volume?
    bob.m.

    bob:
    Disk Utility reports "Underlying task reported failure" when repairing a volume is a serious directory error which Disk Utility cannot repair.
    •I suggest you read through the article.
    •Then, if you do not have an up-to-date backup, it will be a good idea to try to save as much as you can of your data.
    •The article suggests using a third party utility. Disk Warrior and Tech Tool Pro are the best utilities for this job. You will need to get one of them and run it, by booting from the CD, or installing it on an external firewire drive or on a second Mac which you can then run in Firewire Target Disk Mode.
    Please do post back with further questions or comments.
    Good luck.
    cornelius

  • Hard Drive Needs Repair - Cannot Be Fixed?

    I've been having trouble with my MBP as of late.
    The problem first originated when I was having trouble with some DJ equipment that uses an external hard drive. When I called the tech support for the DJ equipment, I was told to run Disk Utility on both the external and laptop hard drives. The external came back clean but the hard drive on the MBP gave reason for distress.
    I clicked "Verify Disk" and it begins to run. It finds a few issues and says "Volume Macintosh HD needs repair." and allows me to input my password. However, at that point, a new window pops up saying that "Underlying task failed to unmount" and then goes back to the Disk Utility window. My concern is that after that window closes, the "Repair Disk" button is still grayed out so not only is there a problem, I cannot fix it.
    The computer has been acting weird lately as well, like deleting all shortcuts on the left side of the Finder except my user shortcut, desktop, network, and Macintosh HD (ie: Apps, Docs, Music, Pics, and Movies disappeared).
    Any suggestions? I have AppleCare till mid-2009.

    You try Disk Utility first. Insert your Tiger installer disk and restart while holding down the 'c' key. Select your language and then from the menu>Utilities>Disk Utility. Select your hard drive and then Repair Disk.

Maybe you are looking for

  • Relationship BCS-Profit Centre and FAGLFLEXT

    Hi, I'm in ECC5, using BCS 4.0 and BW 3.5. Our current designed required 2 type consolidation, which is company consolidation and profit centre consolidation. Note that the profit centre consolidation also required balance sheet and profit/loss. Now,

  • Problem using JDBC Connector

    Hi, I have problem connecting to MS SQL Server using the JDBC Connector. I have 2 main questions, one is on the DQE and the other is on user mapping. I have a created a JDBC System Landscape using the portal component com.sap.portal.systems.jdbc. Fol

  • How to preserve battery life ~ used to last all day, now it runs out by lunchtime

    How to preserve battery life ~ used to last all day, now it runs out by lunchtime

  • How do we get the song of the week free?

    I've heard that on Itunes you get the song of the week free. If this is true, how do I redeem this song?

  • Create table with PL/SQL

    <p style="margin-top: 0; margin-bottom: 0"><font face="Tahoma" size="2">Hi,</font></p> <p style="margin-top: 0; margin-bottom: 0"> </p> <p style="margin-top: 0; margin-bottom: 0"><font face="Tahoma" size="2">I would like to create a table with PL/SQL