I need sherlock and Front Row 1.3.1 Back!  New Front Row is USELESS!

I need sherlock back, I used it all the time, now its missing!
, also the old Front Row 1.3.1 was AMAZING, the new one looks really bad and the fonts are too small to use from far away (as what it was intended for) I used it before now its just to hard to read from my bed and looks ugly too. I like the 4 animated Icons when you start front row, and also liked the animated preview of a movie instead of a frozen frame.
Apple downgraded a major part of what I use for $129
Please help me get the old front row and sherlock back from my tiger DVD's.

Computeradam wrote:
I need sherlock back, I used it all the time, now its missing!
, also the old Front Row 1.3.1 was AMAZING, the new one looks really bad and the fonts are too small to use from far away (as what it was intended for) I used it before now its just to hard to read from my bed and looks ugly too. I like the 4 animated Icons when you start front row, and also liked the animated preview of a movie instead of a frozen frame.
Apple downgraded a major part of what I use for $129
Please help me get the old front row and sherlock back from my tiger DVD's.
Well, you can install Tiger on an external drive and boot into it when you need to. I am NOT being sarcastic. I use Sherlock all the time and was disappointed to find him "retired" and back to bee keeping. Even MS still has Watson, don't they?
My G5 is dual boot - I planned it that way. One internal drive is Tiger, the other Leopard.
I will partition my external LaCie drives so that one partition will be a bootable Tiger clone, the rest of the partition for Leopard's TM.
The best of both worlds is to have both worlds, right? Then the decision becomes moot. Keep "Plan A" and "Plan B" and you can't lose.

Similar Messages

  • I have a deskjet D1420 and officejet pro L7780 neither print back to front

    I have a HP deskjet D1420 and a HP Officejet Pro L7780 and neither one will print the pages from the back to the front.  The option to print back to front has been selected on both printers.
     i.e. printing 2 pages and the last page prints first followed by the first page
    Any help in resolving this issue will be greatly appreciated.  Thanks

    Please read this post then provide some details.  What operating system?
    I do not think the D1420 has an automatic duplexer, but the L7780 should be able to be configured for this.  See the Vista/Windows 7 Duplex Printing Troubleshooting Guide here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hit the exception when editing the value of row key column in a new created row in a table

    1. I created a view object with 2 entity objects (parent table: YARD_FIXED_SLOT - child table: YARD_FIXED_SLOT_DETAIL) and the primary key of child table composes of 2 columns ( one of them is FK: YardFixedSlotDetail.FIXED_SLOT_ID REFERENCES YARD_FIXED_SLOT(FIXED_SLOT_ID)
    SQL queries:
    SELECT YardFixedSlotDetail.FIXED_SLOT_ID,
           YardFixedSlotDetail.MODIFIED_DT,
           YardFixedSlotDetail.SLOT_FROM_N,
           YardFixedSlotDetail.SLOT_TO_N,
           YardFixedSlotDetail.USER_ID,
           YardFixedSlot.BLOCK_M,
           YardFixedSlot.BLOCK_N,
           YardFixedSlot.FIXED_SLOT_ID AS FIXED_SLOT_ID1,
           YardFixedSlot.SECTION_N,
           YardFixedSlot.STATUS_C,
           YardFixedSlot.TERMINAL_C
    FROM  YARD_FIXED_SLOT_DETAIL YardFixedSlotDetail, YARD_FIXED_SLOT YardFixedSlot
    YardFixedSlotDetail.FIXED_SLOT_ID = YardFixedSlot.FIXED_SLOT_ID
    2. I dragged this view object into JSF page as an ediable table and add 'add' button to add a new row to the table. and the handling logic in managed bean is as followed. now one new row can be added succesfully in the table.
        public void processSlotDetailCreation(ActionEvent ae)
            DCBindingContainer bindings = (DCBindingContainer)getBindings();
            DCIteratorBinding dciter = bindings.findIteratorBinding("YardFixedSlotDetailFindAllByBlock1Iterator");
            Row row = dciter.getCurrentRow();
            //get the last row for the index and create a new row for the //user to edit
            Row lastRow = dciter.getNavigatableRowIterator().last();
            YardFixedSlotDetailFindAllByBlockRowImpl newRow = (YardFixedSlotDetailFindAllByBlockRowImpl)dciter.getNavigatableRowIterator().createRow();
            newRow.setFixedSlotId(new Integer(21));
            newRow.setUserId("adftest");
            newRow.setModifiedDt(new Timestamp(System.currentTimeMillis()));
            //bug exist here
            newRow.setSlotFromN(new Integer(1));
            //newRow.setSlotToN(new Integer(1));
            newRow.setNewRowState(Row.STATUS_INITIALIZED);
            int lastRowIndex = dciter.getNavigatableRowIterator().getRangeIndexOf(lastRow);
            dciter.getNavigatableRowIterator().insertRowAtRangeIndex( lastRowIndex+1, newRow);
            // make the new row the current row of the table
            dciter.setCurrentRowIndexInRange(lastRowIndex);
            dciter.setCurrentRowWithKey(newRow.getKey().toStringFormat(true));
            //table should have its displayRow attribute set to //"selected"
           // AdfFacesContext.getCurrentInstance().addPartialTarget(slotDetailsTable);
    3. When filling in a new value for SlotFromN column (note that SlotFromN column and FixedSlotId column are the rowKey), hit the exception below:
    [2013-12-04T13:04:28.866+08:00] [DefaultServer] [ERROR] [] [oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter] [tid: [ACTIVE].ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: eb5e281b-6b07-4c17-987e-049792c97dda-000001bf,0] [APP: YPCApp] [DSID: 0000KAvzIaA5qYWFLzmJOA1IbdqZ000003] ADF_FACES-60096:Server Exception during PPR, #7[[
    oracle.jbo.InvalidOperException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-34014. Error message parameters are {0=oracle.jbo.Key[21 null ], 1=root}
    at oracle.jbo.uicli.binding.JUCtrlHierBinding.bringNodeToRangeKeyPath(JUCtrlHierBinding.java:859)
    at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding.bringNodeToRangeKeyPath(FacesCtrlHierBinding.java:122)
    at oracle.adfinternal.view.faces.model.binding.RowDataManager.setRowKey(RowDataManager.java:131)
    at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$FacesModel.setRowKey(FacesCtrlHierBinding.java:951)
    at org.apache.myfaces.trinidad.component.UIXCollection.setRowKey(UIXCollection.java:527)
    at org.apache.myfaces.trinidad.component.UIXTable.setRowKey(UIXTable.java:760)
    at oracle.adfinternal.view.faces.renderkit.rich.TableRendererUtils._processStampedChildrenForActiveRow(TableRendererUtils.java:2950)
    at oracle.adfinternal.view.faces.renderkit.rich.TableRendererUtils.processFacetsAndChildrenForClickToEdit(TableRendererUtils.java:1604)
    at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer.processFacetsAndChildrenForClickToEdit(TableRenderer.java:352)
    at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer.decodeChildren(TableRenderer.java:193)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1347)
    at org.apache.myfaces.trinidad.component.UIXCollection.processDecodes(UIXCollection.java:226)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at oracle.adf.view.rich.component.fragment.UIXRegion.decodeChildrenImpl(UIXRegion.java:605)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXForm.processDecodes(UIXForm.java:75)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1365)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1351)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:1124)
    at javax.faces.component.UIComponentBase.processDecodes(UIComponentBase.java:1176)
    at javax.faces.component.UIViewRoot.processDecodes(UIViewRoot.java:933)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl$ApplyRequestValuesCallback.invokeContextCallback(LifecycleImpl.java:1574)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:416)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:280)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:254)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:341)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:478)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:478)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:303)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:208)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:137)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:225)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3367)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3333)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
    at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2220)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2146)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2124)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1564)
    at weblogic.servlet.provider.ContainerSupportProviderImpl$WlsRequestExecutor.run(ContainerSupportProviderImpl.java:254)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)
    4. I think problem maybe is related with row key, but I need end user to change rowkey column value. does it allow changing the value of column as row key? I found this problem maybe only occur for new created row. For those existing rows, even I change the value of row key column, no such problem occurred, how do I handle this situation?
    Appriciate if anybody can help.

    Hi Bangaram,
    Thank you for your reply. 
    The error: "Root cause error code is JBO-34014. Error message parameters are {0=oracle.jbo.Key[21 null ], 1=root} "
    I didn't create master records, I just used joint queries for information display of both master and detail. I am trying to create a row in the UI table to create a new detail record and master record already exists.
    The row key for new added row in UI rich table is [21 null ], row key of detail records table composes of 2 columns. 21 is for FixedSlotId and null is for SlotFromN. when I provide a new value for SlotFromN column in UI rich table, problem will occur.

  • The @ and " symbols on my keyboard are back to front!

    Hi everyone,
    If I hit 'Shift+2' I get quotations instead of the '@' symbol as per the keyboard. Does anyone know how to fix this?
    This hasn't always been the case, but I can't pinpoint when, or how this started to happen!
    Thanks in advance,
    Kirsty

    Kirstyds wrote:
    Hi everyone,
    If I hit 'Shift+2' I get quotations instead of the '@' symbol as per the keyboard.
    If you are running Mavericks, go to system preferences/keyboard/input sources and delete the item British PC and make sure you only have US or British present.

  • How to populate rows from another table in new blank rows of other table

    I have to convert an oracle form 6i to Jdeveloper application. In forms 6i we use create a cursor for other table and then populate the current table data block row using create record and assigning its values from cursor and then issuing next record until all cursor records are written in data block. After some manual editing we save the whole form and then all block records are saved as new rows in table.
    Now how to create this functionality in jdeveloper application.
    Kindly help.

    two steps-
    1. get row from first VO.iterate them - like below -
    DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
                                    DCIteratorBinding dcIteratorBindings = bindings.findIteratorBinding("ViewObj1Iterator");
                                    HSSFRow  excelrow = null;
                                            // Get all the rows of a iterator
                                            oracle.jbo.Row[] rows = dcIteratorBindings.getAllRowsInRange();
                                        int i = 0;
                                                for (oracle.jbo.Row row : rows) {
                                                                                                                    row.getAttribute(colName).toString());  // by this you can get row attribute value..
    2. inside iteration create row for VO 2 for example-
    ViewObject employee= findViewObject("EmployeeVO");
    // Create a row and fill in the columns.
    Row row = employee.createRow();
    row.setAttribute("Name", "Vinay");
    row.setAttribute("EmpId", 1);
    //Insert row in to the default row set
    employee.insertRow(row);
    Read more: http://www.techartifact.com/blogs/2012/12/creating-new-row-of-view-object-in-adf-techartifact.html#ixzz2iL978UOD
    http://www.techartifact.com/blogs/2012/12/creating-new-row-of-view-object-in-adf-techartifact.html

  • Factory faulty HDD needs replacement and hence new OS.

    My HP Probook 4545s was shipped with an HDD fault, the system would not book and hence go into the black and white diagnostics screen, the after it failed HDD tests it would say no operating system found etc. I went to my local HP reps and they said the HDD needed replacing and I would have to install a new OS. With the HDD replaced, I would have to install a new OS, however, I was given an OS CD (one for w7 and one for w8, the pc was displayed as w8, but came as w7) on purchase, but it did not come with a CD Key. I do not want to have the activate windows prompt coming onto my screen ever so often, so I was wondering if I could somehow source a CD Key for my OS CD. The normal answer would be to buy a new genuine copy, however, this was not my fault as it was, as stated, a faulty HDD. 
    This question was solved.
    View Solution.

    No-the info is in BIOS, not on the old hdd.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • She Said We Need Space and Has Temporarily Separated

    I just dropped off my (late 2013) 15" MacBook Pro for screen replacement (dead pixel). The store was in Grand Central, NY. Any idea where my baby is being shipped for repair and when I'll have her back? I miss her so much already. (I creep myself out sometimes.)

    When I turn in any of my Macs to get them worked, I start by telling them exactly when I need to have it back for my next job.
    Once they were planning to fix it at the store but they were not able to promise it back to me within my time frame so they send it to the repair center who was able to meet my schedule.
    It has been my experience if you give them the hardware and don't do that they seem to work on it when they can get to it. If you explain your needs up front, they will do everything they can to meet your schedule. At least that is the way they have always worked for me.
    Allan

  • New front row in leopard ...

    I've upgrade my tiger into leopard, now i have a new front row, very nice, but in DVD playback I prefer the time line of tiger because every time i stop the film i can seen the time remaing to the end, and biggest font was better for looking the Film from my bed !

    rentals and a new rental-focused gui seem to be the only update right? I am not seeing anything leading me to believe that the appletv experience is going to be expanded for those who rip their own movies and use it that way.
    verdict is still out on the 5.1 pass thru as well. how well will it work for people who do their own encoding and how many of the "some" hd movies will include it?

  • Need SQL statement to generate a sequence number in the output rows

    Hi folks. I need to create an SQL statement that generates a sequence number column in the output rows (records) such that the first returned row has this column set to 1, second returned row has the column set to 2, etc.
    For example, consider the query:
    SELECT income from employees WHERE income != 20000 ORDER BY income;
    If employees.income contains 60,000, 20,000, 35,000, and 19,000 for respective rows, the output would be this:
    19,000
    35,000
    60,000
    I would like the SQL to also return a sequence number that is computed across the returned rows, resulting in two output columns:
    1 19,000
    2 35,000
    3 60,000
    Is there a simple SQL function that generates the sequence number, in order, and only for the returned rows? Or is there another way?
    I'm stumped. Any help is appreciated! Thanks!
    - Jack Cochrane

    Hi,
    Welcome to the forum!
    Use ROWNUM, like (example):
    Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
    Connected as hr
    SQL> select rownum, first_name from (select e.first_name from employees e where e.first_name like 'J%' order by e.first_name);
        ROWNUM FIRST_NAME
             1 Jack
             2 James
             3 James
             4 Janette
             5 Jason
             6 Jean
             7 Jennifer
             8 Jennifer
             9 John
            10 John
            11 John
            12 Jonathon
            13 Jose Manuel
            14 Joshua
            15 Julia
            16 Julia
    16 rows selected
    SQL> But rememeber if you want to be sure of unique numbers in certain field is better to use sequences and use seq_name.nextval each time you need.
    Regards,

  • Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

    Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

    Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
    Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

  • ROLLBACK SEGMENT NEEDS RECOVERY AND HOW TO RESOLVE IT

    제품 : ORACLE SERVER
    작성날짜 : 1995-02-06
    Subject :
    This article discusses what it means when a rollback segment needs
    recovery and how to resolve it.
    OVERVIEW
    This bulletin discusses why a rollback segment is the status of
    "needs recovery", what the status means, and how to resolve it.
    INTRODUCTION
    Rollback segments can be monitored through the data dictionary view,
    dba_rollback_segments. There is a status column that describes what state
    the rollback segment is currently in. Normal states are either online or offline.
    Occasionally, the status of "needs recovery" will appear.
    This is considered to be a corrupted rollback segment.
    When a rollback segment is in this state, bringing the rollback segment
    offline or online either through the alter rollback segment command or
    removing it from the rollback segments parameter in the init.ora usually has no effect.
    UNDERSTANDING
    A rollback segment falls into this status of needs recovery whenever
    Oracle tries to roll back an uncommitted transaction in its transaction
    table and fails.
    Here are some examples of why a transaction may need to rollback:
    1-A user may do a dml transaction and decides to issue rollback
    2-A shutdown abort occurs and the database needs to do an instance recovery
    in which case, Oracle has to roll back all uncommitted transactions.
    When a rollback of a transaction occurs, undo must be applied to the
    data block the modified row/s are in. If for whatever reason, that data
    block is unavailable, the undo cannot be applied. The result is a
    'corrupted' rollback segment with the status of needs recovery.
    What could be some reasons a datablock is unaccessible for undo?
    1-If a tablespace or a datafile is offline or missing.
    2-If the object the datablock belongs to is corrupted.
    3-If the datablock that is corrupt is actually in the rollback segment
    itself rather than the object.
    HOW TO RESOLVE IT
    1-MAKE sure that all tablespaces are online and all datafiles are
    online. This can be checked through dba_data_files under the
    status column. For tablespaces, look in dba_tablespaces.
    If that still does not resolve the problem then
    2-PUT the following in the init.ora-
    event = "10015 trace name context forever, level 10"
    Setting this event will generate a trace file that will reveal the
    necessary information about the transaction Oracle is trying to roll
    back and mostimportantly, what object Oracle is trying to apply
    the undo to.
    3-TAKE the corrupted rollback segment out of the rollback_segments parameter in the init.ora
    4-SHUTDOWN the database (if normal does not work, immediate, if that does
    not work, abort) and bring it back up.
    Note: An ora-1545 may be encountered, or other errors, that is ok.
    5-CHECK in the directory that is specified by the user_dump_dest parameter
    (in the init.ora or show parameter command) for a trace file that was
    generated at startup time.
    6-IN the trace file, there should be a message similiar to-
    error recovery tx(#,#) object #.
    TX(#,#) refers to transaction information.
    The object # is the same as the object_id in sys.dba_objects.
    7-USE the following query to find out what object Oracle is trying to
    perform recovery on.
    select owner, object_name, object_type, status
    from dba_objects where object_id = <object #>;
    8-THIS object must be dropped so the undo can be released. An export or
    relying on a backup may be necessary to restore the object after the corrupted
    rollback segment goes away.
    9-AFTER dropping the object, put the rollback segment back in the init.ora
    parameter rollback_segments, removed the event, and shutdown and startup
    the database.
    In most cases, the above steps will resolve the problematic rollback segment.
    If this still does not resolve the problem, it may be likely that the corruption is
    in the actual rollback segment.
    At this point, if the problem has not been resolved, please contact
    customer support.

    Yes we were having the performance issues when it is getting locked? in this what i want to know
    why it happens suddenly?
    or what package this piece of code is calling?
    or is there any possiblity of system will degrade the performance like sys user etc...?
    where exactly i found the root cause for further analysis?
    so that next time onwards if particular objects is locking we come to know why it happens is there any logical false or how do we eliminate this issue last time?
    coz in our environment sometimes most of lockings are from the same table?
    pls let me know where i have to concentrate for debug and how to troubloshoot and reslove this
    sorry for the inconvience.. i m expecting the answer from here. if anybody wants some more info i ll let him know.
    as of till now i got some docs i start to read this.
    Regards
    M.Murali..
    Note: will system/sys degrade the performance ?if so how ?

  • My iphone6 camera is rear , and focus dosnt work in it , although my front camera is working great

    My iphone6 camera is rear , and focus dosnt work in it , although my front camera is working great

    Hey there Aydarezania,
    It sounds like you are able to focus using the front camera, but the back one doesnt seem to. I would use these troubleshooting steps from the following article, named:
    Get help with the camera on your iPhone, iPad, or iPod touch
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    Your photos are blurred or out of focus
    If your photos are blurred, out of focus, or have dark spots, try these steps:
    Make sure that the camera lens is clean. If you need to clean the lens, use a microfiber cloth. If you see dirt or debris inside the lens, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    With iPhone 6 Plus, a metallic case or magnetic lens could interfere with optical image stabilization. If you have a metallic case or magnetic lens attachment, try taking a picture without it. Then compare the quality.
    Adjust the focus by tapping on the person or object in the preview screen. You’ll see the screen pulse or briefly go in and out of focus as the camera adjusts. In photo mode, try to stay steady when adjusting the focus. If you move too far in any direction, the camera will automatically refocus to the center. In video mode, you can adjust the focus before you begin recording.
    If the color seems too bright, or you see double-exposures of moving objects, make sure that HDR is set to Auto or Off. Tap HDR at the top of the screen to choose a different setting.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Can you move a row in a DataGridView to the first row and move the other rows down to make room?

    I'm using a DataGridView (I call it "dg") to display a list of items. I want the user to be able to position the cursor on a row in the middle of the list then click a button to move that row to the top of the list (and move the other rows between
    the first row and the row being moved down one row to accomodate the new first row).
    Robert Homes

    Hello,
    If the DataGridview does not have it's DataSource set we can use the following logic
    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
    Dim data = (From T In DataGridView1.Rows(DataGridView1.CurrentRow.Index).Cells.Cast(Of DataGridViewCell)() Select T.Value).ToArray
    DataGridView1.Rows.RemoveAt(DataGridView1.CurrentRow.Index)
    DataGridView1.Rows.Insert(0, data)
    End Sub
    If the DataSource is set then we need to do what was done above but against the underlying data rather than the DataGridView itself. The base logic can be found in
    the following article in LanguageExtensions.vb but please note the code there is for a different type of move yet the logic is still the same in the end.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

  • I need to change my printer from printing back to front to front to back

    My printer prints the last page first and the first page last. I need to change the printer so that it always prints front to back.

    Hi,
    Please try this.
    Touch set up icon (wrench shaped icon) in printer display screen . Then select first option which appear on your  printer screen. After  touch OK again select first option appear on printer screen. Touch OK. A list of languages will appear. Select English from the list.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • The new Front Row should take a backseat.

    The Front Row on Leopard looks better, except for the fade-in/out effect instead of the desktop-being-pushed-back effect.
    But its functionality has gone down. You can no longer resume movies or even leave the music on when you quit front row...
    Is there anyway to get that functionality back on the new Front Row?? Its Apple, we should have everything, the looks and the works!
    Its also a no-go on the feedback to apple... They don't have an option for Front Row.
    If Apple people are reading this... you know what to do in 10.5.2!

    arunjitsingh wrote:
    The Front Row on Leopard looks better, except for the fade-in/out effect instead of the desktop-being-pushed-back effect.
    But its functionality has gone down. You can no longer resume movies or even leave the music on when you quit front row...
    Front Row appears to be a new application. The Front Row version supplied with remote control equipped Intel Macs seemed to call upon iTunes (and thence Quicktime) to do its heavy lifting. Thus iTunes helper would keep music playing after Front Row quit. The other feature you didn't mention you lost was that Front Row would play music wirelessly via Air Tunes and an Airport Express when it used iTunes. It also fails to use an external monitor for DVDs.
    The new Front Row can be legally used by owners of Mac gear that doesn't have a remote control. This is a great leap forward for those who don't as yet have an Intel Mac, or who have a Power Mac. Plus Front Row now plays DVDs without invoking iTunes. It even plays DVDs from your hard drive (complete with cover art, if you add a jpg to the TS_Video folder). This is a great advantage for people living in the majority of countries where iTune Store does not offer movies at all. It would not surprise me to see further upgrades of Front Row fairly soon. Personally, I love it.

Maybe you are looking for