I need software that recognizes a disctinctive ring for incoming faxes

I have an external fax modem for my iMac intel, but I need software, I guess, that recognizes a distinctive ring.  Any suggestions?

Run a FAX TEST from your printer. -Press SETUP-press the right arrow until you get to "TOOLS" touch OK-press right until "RUN FAX TEST"  Your printer should give you a read out of 6 or 7 items and marks them as PASS or FAIL. What fails?  Also turn "ERROR CORRECTION" to "OFF" and "FAX SPEED" to "SLOW"from the FAX SETTINGS MENU. Then Fax 1-888-473-2963. (1-888-HP FAXME) This is a FAX TEST line where you can test your OUTGOING and INCOMING FAXES. First you send a fax then a few minutes later you recieve a fax back if every thing is working properly.

Similar Messages

  • My new iPhone 5S will not ring for incoming calls.  It vibrates. I've tried suggested tips for iPhone 4 but it doesn't work for 5S.  Please help!!

    Can anyone help.  My new iPhone 5S does not ring for incoming calls.  It vibrates.  How can I get ringer to work?

    Hello lyngos,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS2802
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    Best of luck,
    Mario

  • RTX Dualphone 3088 - no longer rings for incoming ...

    Hi
    I have followed the manufacturer's advice, reset, rebooted, turned call forwarding off (don't know why they suggest this) but to no avail - my two RTX Dualphones won't ring for incoming calls.
    However they do seem to place calls fine.
    All the ring tone setting seem to be on and the volume set to max.
    Any advice? Is there a hidden mute button? Or another work around.
    Thanks in advance!

    I have had three of theses phones and the ringing tone on all three has failed after about eighteen months. I was about to buy a fourth phone when I decided that enough was enough and tried a home repair. I ripped a speaker out of a redundant mobile telephone and fitted into the RTX and, hey presto, ringing tones once more. This is an obvious fault with this model which has been reported by many users and one would have thought that there would have been some modification of the faulty speakers by now but, hang on a minute. If I have bought three and was considering buying a fourth how many replacements have other people bought? That's a nice little earner for RTX so why bother! I certainly won't be buying another one. I have traced the fault and will repair the other two once I have found suitable replacement speakers. This fault detracts badly from an otherwise excellent piece of equipment.

  • TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

    My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

    Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion.  There should be a row of icons at the top of a grey field.  if the quarter-moon icon is bright white, tap it.  If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

  • I need software that enables me to switch between different modes/profiles on my Mac

    I need software the allows me to switch between modes with a click on my computer.
    For example:
    Mode 1:      Disables the screen saver
                      Changes power settings
                      Changes the wallpaper
    Mode 2:      Sets everything to standard

    http://startly.com/products/quickeys/mac/4/

  • Need software to keep track of clients for small business.

    We need some way to keep up with multiple types of payments for several hundred clients, as well as the ability to make notes as needed.  We have been using ical for our notes and a simple Numbers spreadsheet, but this method is cumbersome.  I have looked at various accounting programs, but they all seem much more complicated than I need.  Any help or suggestions are greatly appreciated! 

    I ran a small business, and there is no way I would have done it with iCal and Numbers.  Intuit's Quickbooks is the best program for small business.  Yes, it's probably got more than you need, but it helps pay bills, taxes, inventory, blah blah blah.  It's only $200.  They have an online version.  It links to your bank.  It links to tax software.  I can go on.  I used the enterprise version, and I'm not an accounting, and I found it a piece of cake to learn. 
    Since this is the forum for the Macbook Pro, you're really not going to find much info here.  Go to the Intuit Quickbooks website, and do a test run.  Trust me, if  you want to make a profit and pay bills on time, get a real program.  Quickbooks is one of the cheapest but still the best out there. 

  • Setting number of rings for incoming call

    how does one control the number of rings regarding incoming calls before it goes to voice mail.

    You can do it manually - it's a bit of a fiddle but it works. You need to specify the length of time in *seconds* that you want your phone to ring, before voicemail kicks in. This article describes how to do it step by step - I've followed it and it works perfectly
    http://www.iphonefaq.org/archives/971382
    Hope that this helps

  • Distinctive ring setting for incoming faxes keeps resetting itself

    Hi, I recently installed an Officejet 4500 and in the fax setup wizard I chose "no" for having a distinctive ring for faxes.  I have tried but I am unable to receive incoming faxes and I have noticed that when I run the setup wizard again all of my previous information has been remembered by the choice for the ring setting has been changed to "distinctive ring". Any advice is appreciated.

    Run a FAX TEST from your printer. -Press SETUP-press the right arrow until you get to "TOOLS" touch OK-press right until "RUN FAX TEST"  Your printer should give you a read out of 6 or 7 items and marks them as PASS or FAIL. What fails?  Also turn "ERROR CORRECTION" to "OFF" and "FAX SPEED" to "SLOW"from the FAX SETTINGS MENU. Then Fax 1-888-473-2963. (1-888-HP FAXME) This is a FAX TEST line where you can test your OUTGOING and INCOMING FAXES. First you send a fax then a few minutes later you recieve a fax back if every thing is working properly.

  • TS1630 My iPhone 4s no longer has an audible ring for incoming calls?

    My phone no longer rings to announce incoming calls?

    I too have no audible ring for calls, no sounds for games, text alerts, etc.  I do not have the silent switch turned on.  This occured last night while playing Words for Friends.  I've checked sounds under settings and sounds is turned on.  Any solutions?

  • Need software that has passed windows logo testing

    can not install the wireless Officejet 6500.  The 6500 is installed on the network.  Message while do installation is "windows logo testing failed to verify compatibilty with windows XP"  installation will not go beyond this point.  The odd part of this is that I had it installed at one time and then the installtion failed.
    I have tried your XP solutions and here is the message I received  "an error ocurred during installation.  The driver can not be installed because it is either not digitally signed or not signed in an approtriate manner"
    Where do I go from here?

    Hi callison11,
    On the Software Installation screen with the 'Windows logo testing ' error, click Continue Anyway .
    NOTE:You might receive more than one prompt about the software not passing Windows logo testing. Click Continue Anyway each time you receive the prompt.
    Windows logo testing is part of Microsoft's WHQL (Windows Hardware Quality Lab) program, which helps customers identify products that are compatible with the Windows operating system. WHQL certification is not related to product functionality. You can still install and use the HP printer and software without the WHQL certification.
    2.  Follow the on-screen instructions until you get to the Found New Hardware Wizard screen. This screen might include a list of products and prompt you to Please select the best match for your hardware from the list below . Leave the selection at the default, and then click Next .
    3.  Continue following the on-screen instructions to complete the HP software installation.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Need software that supports video in via USB. QT Pro/iMovie= firewire only

    my friend can upload video from his cam into his pc via the USB but i can't. All I have is Final Cut Pro, iMovie HD and QT7 Pro. They All want firewire.
    k, i could get a cable but i'd like to save the trip.
    anything out there?
    tnx

    Sndchch,Read this article which I believe will solve your problem.
    Generally USB can't sustain the data rate required for full quality video and so is not the choice for video transfer.
    regards
    mrtotes

  • Need confirmation that my rtsp streaming settings for the WVC54GCA are correct

    So I recently set up the WVC54GCA for remote viewing over the internet. I use Verizon DSL with the Westell Versalink Gateway 327W, with the latest firmware (4.4.3) I was able to forward an alternate HTTP port (1025) enabling both TCP/UDP to my cams static IP. I was also able to forward the RTSP port (554) enabling both TCP/UDP to my cam's static IP. My problem is that my router will not forward any more ports, other than 1025 and 554.
    There is a setting on the camera for RTP data port (listed as port 5000) and I cannot forward port 5000. I have tried changing the cam setting to a bunch of different ports other than 5000 (6881, 1024, 1900, etc.) but no matter what I try, none of the other ports can be opened through my router. It appears to work via the routers firmware (i.e. it looks just like the setting for 1025 and 554, which do forward) but when I check the port using canyouseeme.org or GRC the port is listed as closed or stealthed.
    I am able to view the cam from my office at rtsp://camname:554/xxxxx using Quicktime or Realplayer.  However, neither my phone nore my buddies can connect.
    My question, since I can view the mobile streaming feed outside of my LAN using Realplayer or Quicktime, is "Am I configured properly for mobile (rtsp) streaming?"  Is this a cellphone issue rather then a configuration issue?
    Solved!
    Go to Solution.

    Sorry for the above post, I confirmed my cam is properly streaming mobile video.  The video feed was accessed using a Samsung Omnia and Blackberry Curve.
    I am now home and confirm that even though I set up port forwarding for port 5000, that port is listed as closed via canyouseeme.org.  The feed works though, so I'm happy.

  • My iphone 4s will not ring for incoming calls...I've checked Do not Disturb, changed my ringtone to default and did a soft reset.  It will vibrate but not ring.  What can I do?

    My iphone will not ring when calls come in.  I have it set to ring and vibrate.  The Do not disturb is turned off and I have reset it but still it will not ring. What can I do?

    Check and see that the silent mode switch on the upper left side is toward the front of the iPhone and there is no orange or red showing.

  • HT4623 I updated my phone to iOS6 and now it will not ring for incoming calls.  It blocks my landline number.  I've tried resetting, updating, etc.  I've gone to the Verizon store.  They were puzzled too. Any ideas of what I should try next?

    I accepted the push to update my iphone to iOS6....now it will not ring.  It blocks calls from my landline. Help!   I've tried resetting, etc.

    It has been caused in an OTA glitch.  You need to hook it up to your computer, restore and update off of iTunes.  Good Luck.

  • IPhone 4 does not ring for incoming calls

    I got the iPhone 4 two days ago, and I noticed that when someone calls me, the phone will vibrate, but it will not ring.  The volume on the ringer is set to the highest level.  I downloaded an update for the phone 2 days ago.  What can I do to get my phone to ring?  Do you think the update had anything to do with the problem?
    Thank you in advance for your help!

    Hello Dracheskind,
    Have you corrected the issue with the ringtone volume? If not, make sure the Ring/Silent button above the volume keys is turned on (if off, orange sticker will appear). Then go to settings > sounds > Ringer and Alerts > change the volume to loud. The vibrate options can stay on. If all of these settings are enabled, try changing the ringtone. 
    For additional assistance, go to http://www.apple.com/support/iphone/
    Thank you,

Maybe you are looking for