I need some help here. someone please respond with some type of idea.
okay, here's the deal
when i take the Ipod out of the usb, i cut it on, and it's just a constant green light in the front that wont go away. it wont play, and wont have any affect on the buttons or anything. it's just a steady green light.
it wont show my battery life until it's cut off.
do you have any idea what's going on?
i'm so uber angry it isn't funny.
P.S.- I've had this ipod for like, almost a year.
okay, here's the deal
when i take the Ipod out of the usb, i cut it on, and
it's just a constant green light in the front that
wont go away. it wont play, and wont have any affect
on the buttons or anything. it's just a steady green
light.
it wont show my battery life until it's cut off.
do you have any idea what's going on?
i'm so uber angry it isn't funny.
P.S.- I've had this ipod for like, almost a year.
See if this helps:
http://docs.info.apple.com/article.html?artnum=303332
Similar Messages
-
Need some help - here is the problem with I import.
I am importing a flv file. The flv file runs fine outside of Premiere. When I import it, the audio imports fine. The video however imports and displays when run at SUPER slow mode.
For example, when I run the imported movie, and let say all I am doing (my movie) is counting from 1 to 10 (via audio) and moving my mouse cursor slowly from the bottom of the screen to the top (visually), My mouse cursor will still be rising from the lower 1/4 of the screen while I hit 10 (audio wise) in number.
If that example is too confusing to understand, sorry... The video is just not matching the audio in speed and is sizeable different.
Anyone know what is going on here?> Any ideas on what I might be doing wrong at the import level?
I'm not sure you're doing anything wrong. I had the exact same issue with Camtasia files that I was using for some tutorials.
Is there any way to get the source file before it was converted to .flv?
Do you have the entire Creative Suite? If so, set up a dynamic link to an AE comp that contains the .flv file. IIRC, that worked for me before I decided to edit the tutorials in AE anyway. The only potential issue I see is that the processing overhead for a 2-hour dynamically-linked comp may exceed what your system (or Pr) can handle. -
Need some help here. cannot communicate with Fingerprint sensor
Ok, so I rebooted and was able to install the new sw ver. .245 ...but the T500 still cannot communicate with the sensor. It asks me to verify that the sensor is "ready" but give no guidance on how to do so in any of the help options or in the fingerprint reader manager or the device manager...so how can I find the sensor??? Very frustrating. Please help.
The scriptgen takes your CAP file and generates an APDU script to load it onto a JCRE implementation. The installer applet is what recieves the APDU commands to load that CAP file. Read the JCVM specification and read what a CAP file is and all the individual CAP components that make up the CAP file.
-
Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D
sounds like the cable or the iphone connector are somehow damaged
-
PLEASE HELP ME. Some important emails have gone to an archive mail box and i really need them. Can someone please help me with how to view the archive email box and the emails that are in there?
http://kb.mozillazine.org/Recovering_deleted_mail_accounts
-
need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200
What are the existing settings iMovie?
Al -
I was updating my iPad 2 to the latest version, I have never updated before. It was done downloading and was backing up. Error in backing up (-5000). I tried restarting, no help. Someone please help.
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
I ahve a 2.4 ghz compact wireless -G usb network adapter with speedboost and my problem is taht i can't get it to hold the speed like it is suppose to, it starts out at 54.0 and with in a couple of minutes is has dropped down to 11.0 the signal is good to excel. I hve reinstall the software on my computer and even more the networkadapter to another usb port to see if maybe that would fix the prolbem but nope., Some help here from someone please
the router I have is a linksys WRT54GS and it is less then 50- ft from where my computer is it is downstairs and tehr is only one wall between it and my system
-
I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?
Are you choosing a different plan before tapping Done?
To downgrade, you should be doing the following:
Go to Settings > iCloud > Storage & Backup.
Tap Change Storage Plan.
Tap Downgrade Options and enter your Apple ID password.
Choose a different plan to use when your current storage plan expires.
Tap Done. -
Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files in excess of 250MB. I cannot resize as the large files are needed for enlargements. Have all sorts of problems trying to manipulate, add effects and saving most large files. I need some serious processing power. Can anyone suggest what Mac i should purchase? I thank you in advance for your help :-)
It sounds as if you're having some system-related problems now, unrelated to processing power as such. In particular, a buggy video driver can cause everything to slow to a crawl.
Medium format files are big, true, but not so big as to cause significant slowdowns on a normally functioning and reasonably current computer. A laptop will always be slower than a well-equipped desktop system, though. Mac vs PC plays no part in this, performance is unrelated to platform.
Bottlenecks are different in ACR and Photoshop, so that should give you a clue. ACR is computing-intensive and mostly limited by CPU speed. Photoshop, however, is mostly bandwidth-intensive and mainly limited by memory and disk throughput. It's also sensitive to GPU issues. -
[VIA] Need some help here ... anyone please ?
Hello,
I'm new here, just wanna ask for some solution for my pc problem.
I'm currently using Athlon XP 2.4, MSI KT400 (MS-6712AV) Mainboard, just bought for 3 months, but today when i start my pc, it comes out on the screen " Checking NVRAM ", than it stop, the system just hanged there, even that i kept restarting. Can anyone tell me what's the problem ? Does anything to do with my motherboard ? Thank you.emm, you reminded me Dr.Stu, i did remove my PS once yesterday to test on my other PC. this problem occured since i switched back. I did take out the cards and rams one by one, but same result.
Now i unplugged one of the ide cable, i can successfully start my pc to windows, but in roughly few minutes, it'll auto restart. Same problem ?
Thank you
My Specs:
AMD Athlon XP 2.4Ghz
MSI KT4V MS-6712 MotherBoard
MSI GeForce FX-5700 256mb Display Card
768mb DDR Rams ( Apacer 256mb X2 , Kingston 256 X1 )
ASUS 52X CD / 52X24X52 CD-R / Pioneer DVD-R A-109B/W 16X4X16 +-
Creative SB Audigy 2 ZS Value SoundCard
Eagle Aluminium ATX Casing with iCute 450Watt 2Fan PSU
80Gb Western D HDD 8mb Buffer
3 com 10/100 N/Card and Samsung 710v LCD Monitor -
Hey Guys, I need some help here
Im doing some create view and create procedures for my work.
In creating view, its just done perfectly.
However with create procedures work, I got some problem with the result.
So here is the coding:
create or replace
PROCEDURE "USP_EDW_CASH_MARGIN"
result_cursor OUT TYPES.cursor_type
AS
CURSOR v_cursor IS
SELECT
to_char (CM100,'99999999999999.99'),
to_char (CM101,'99999999999999.99'),
to_char (CM200,'99999999999999.99'),
to_char (CM300,'99999999999999.99'),
to_char (CM301,'99999999999999.99'),
to_char (CM310,'99999999999999.99'),
to_char (CM320,'99999999999999.99'),
to_char (CM400,'99999999999999.99'),
to_char (CM401,'99999999999999.99'),
to_char (CM402,'99999999999999.99'),
to_char (CM500,'99999999999999.99'),
to_char (CM720,'99999999999999.99'),
to_char (CM730,'99999999999999.99'),
to_char (CM740,'99999999999999.99'),
to_char (CM999,'99999999999999.99')
FROM VW_CASH_MARGIN a;
v_id varchar2(100);
v_row varchar2(4000);
v_clob CLOB;
v_buffer varchar2(10000);
BEGIN
v_id := 'EDW_CASH_MARGIN';
DELETE FROM TBL_INTERFACE_DATA WHERE cd = v_id;
INSERT INTO TBL_INTERFACE_DATA (CD,INT_DATA,DT_CREATED)
VALUES (v_id,EMPTY_CLOB(),(SELECT CURR_PROC_DATE FROM TBL_PROC_DATE));
SELECT INT_DATA INTO v_clob
FROM TBL_INTERFACE_DATA
WHERE CD = v_id
FOR UPDATE;
OPEN v_cursor;
v_buffer := '';
dbms_output.put_line(LENGTH(v_buffer));
LOOP
FETCH v_cursor INTO v_row;
EXIT WHEN v_cursor%NOTFOUND;
if (length(v_buffer) + length(v_row)) < 10000 or v_buffer is null then
v_buffer := v_buffer || v_row;
else
DBMS_LOB.WRITEAPPEND(v_clob, LENGTH(v_buffer), v_buffer);
v_buffer := v_row;
end if;
END LOOP;
if LENGTH(v_buffer) > 0 then
DBMS_LOB.WRITEAPPEND(v_clob, LENGTH(v_buffer)-1, v_buffer);
end if;
CLOSE v_cursor;
OPEN result_cursor FOR
SELECT 'success' AS status FROM dual;
END;
After i run this coding.
I got these errors :
1)Error(46,5): PL/SQL: SQL Statement ignored.
2)Error(46,5): PLS-00394: wrong number of values in the INTO list of a FETCH statement
It says that the error is with this code "FETCH v_cursor INTO v_row;"
Can someone please help me.ok let me explain with emp table.
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_ename VARCHAR2(2000);
BEGIN
OPEN c;
LOOP
FETCH c INTO v_ename;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_name);
END LOOP;
CLOSE c;
END;Here i'm selecting 2 columns in the cursor and getting into one variable.
So i'm getting error like this
ORA-06550: line 7, column 1:
PLS-00394: wrong number of values in the INTO list of a FETCH statement
ORA-06550: line 7, column 1:
PL/SQL: SQL Statement ignored
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_ename VARCHAR2(2000);
v_sal NUMBER(10);
BEGIN
OPEN c;
LOOP
FETCH c INTO v_ename,v_sal;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_ename||v_sal);
END LOOP;
CLOSE c;
END;Here i'm selecting 2 columns in the cursor and getting into two different variables.so no error.
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_row c%rowtype; -->record type declaration
BEGIN
OPEN c;
LOOP
FETCH c INTO v_row;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_row.ename||v_row.sal);---> Here i'm mentioning which column to be printed
END LOOP;
CLOSE c;
END;Same thing i'm getting all columns variable into the records so no error.
and also pls read this
How to ask question
SQL and PL/SQL FAQ -
SOMEONE please give me some HELP
I am EXtREMELY Frustrated right now. I have a HP 6515 that DOES NOT PRINT BLACK INK...I see where things are posted regarding this problem numerous times here. HOWEVER, there is no SOLUTION made public. Everythings is going to PRIVATE MESSAGE. What is the secret.....? Would it be.....YOU NEED TO GET A NEW PRINTER??????...If so, this is the bigest bunch of crap. I have had this printer for about 2.5 years, no reason for it to take a crap. Only used HP ink.....SOMEONE PLEASE HELP ME.....Just bout $120 worth of ink for it......thats more than ya pay for the printer....come on....
Hello lisbell563,
Thank for the reply. Are you using Windows-based computers or Mac OS?
If you are on windows OS, I would like to suggest you to download and try "HP Print and Scan Doctor" which can help to assist you with troubleshooting and problem solving to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
If you are on Mac OS, you may not able to use HP Print and Scan Doctor. However, since one of the error you are facing is "fails to align" and I would like to refer you to this "Alignment Failed" web page for further troubleshooting.
-Bryan-
*I am an HP employee*
** Please click "Accept as Solution" if it solved your problem, so others can find it **
***Give Kudos to say "Thanks" by clicking on the thumbs up button under my name*** -
Need Some Help Here From The Pros....
Hi all...Im new here you see. I have some questions here..
1) May I ask if anyone could just tell me how to actually create a partition like Windows do in Mac OS? I need the partition to do my backups and save some of my important documents.
2) Can we actually create a password to secure certain of my files so that anyone wants to browse it will have to enter the password? Is it possible to do that?
3) Im also trying to use Visor(i cant remember the name, it's a software to enable Mac to run windows without the boot camp) but i tried on my friend's Macbook, I cant use the MSN camera function... Anybody have any idea??? Or it's not compatible with the camera built-in.
4) I want to use "3D Studio Max", its it compatible with Mac OS??? and will it be laggish if i uses macbook 13" white?
Please help....Hi!
1) May I ask if anyone could just tell me how to actually create a partition like Windows do in Mac OS? I need the partition to do my backups and save some of my important documents.
With your external drive attached, open Disk Utility, found in Applications/Utilities. Choose your drive on the left, and use the Partition tab to set up the number and type of partitions. Partitioning will delete all data on the drive.
2) Can we actually create a password to secure certain of my files so that anyone wants to browse it will have to enter the password? Is it possible to do that?
Don't forget that the Mac, just like Windows, is multi-user. You can set up a user for yourself and one for guests or specific people. Nobody can see anybody else's files. You can lock your computer when you go away from the desk if you want absolute privacy.
Or, you can create an encrypted disk image (also using Disk Utility) to store private files if you really want to stick with one user account.
3) Im also trying to use Visor(i cant remember the name, it's a software to enable Mac to run windows without the boot camp) but i tried on my friend's Macbook, I cant use the MSN camera function... Anybody have any idea??? Or it's not compatible with the camera built-in.
Do you mean VMWare Fusion? I believe iSight support is included in the VMWare Tools - when you're running Fusion, there's a menu option to install/update those tools.
4) I want to use "3D Studio Max", its it compatible with Mac OS??? and will it be laggish if i uses macbook 13" white?
I believe it's Mac only, so you should check the Windows specs (RAM requirements, graphic card VRAM, etc) to see if you can run it within a virtual Windows on your Macbook.
Matt -
Basic Output program need some help...Please
import java.io.*;
class FileOutputDemo
public static void main(String args[])
int one=1, two=2, three=3;
FileOutputStream out; // declare a file output object
PrintStream p; // declare a print stream object
try
// Create a new file output stream
// connected to "myfile.html"
out = new FileOutputStream("myfile.html");
// Connect print stream to the output stream
p = new PrintStream( out );
p.printf ("This is written to a file %d", one);
p.close();
catch (Exception e)
System.err.println ("Error writing to file");
}Hello I am new to java, and I hope someone help me to modify the above code in order to make it work as the following:
I have a list of integer values like 1, 2, 3, 4? 10
And I want the program to substitute the integer values (the integer declared list) subsequently one by one to output a new html file as the following output:
This is written to a file 1
This is written to a file 2
This is written to a file3 ?etc
Also this substitution has to be outputted to a new file every time.
Thank you very much in advance for your kind help
if i have to post this anywhere else please advise me..
Adamimport java.io.*;
public class FileOutputDemo
public static void main(String[] args) {
FileOutputStream out; // declare a file output object
PrintStream p; // declare a print stream object
try
// Create a new file output stream
// connected to "myfile.html"
out = new FileOutputStream("myfile.html");
p = new PrintStream( out );
int[] arrayOfInts = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
for (int element : arrayOfInts)
p.printf (element + " ");
p.close();
// Connect print stream to the output stream
catch (Exception e)
System.err.println ("Error writing to file");
}ok .... guys i really understand what do you mean,
i only need your help to make the program print one integer at a time from the array to a seprate file ....what do you suggest ... any hints
Thanks
Maybe you are looking for
-
Hi! Does anyone know if the router wrt320n or any other linksys router (wireless or wired) support 802.1x authentification, particularly PEAP EAP-MSCHAP v2? I'm connected to a network that provides access to the internet via ethernet cable and 802.1x
-
MP3/norton anti-virus headache
I was on the computer on Sunday, and I downloaded an episode of Adam Carolla's CarCast. I was opening iTunes to upload the CarCast mp3, and I had downloaded an update to iTunes on Saturday. iTunes did that standard "do you accept the terms and condit
-
Personalize email disclaimer in exchange 2010 with alias?
Hello all,I would like to notify everyone in my email disclaimer that our email domain will be changing. I need the old email and the new email address for this. I can use %%Email%% but is there a way I can use the alias alone? I think it can't be do
-
Lost power,,, lost configuration
I have a newly installed E2400 Linksys wireless router. About and hour after getting it fully set up, we had a storm come through and it caused a momentary power outage. Long enough to reboot everything. When everything came back online, I found
-
Comment partager des fichiers entre 2 utilisateurs sur un même i mac?
Bonjour, Comment partager des fichiers entre 2 utilisateurs sur un même I mac?