I need some help in choosing a new router

I need some advice. I need to get a new router that will last. I have had a Belkin Surf and the reason I got rid of it I thought I need a stronger signal as I was getting a new computer and adding 2 internet radios. SO I bought the D-Link DIR 655. WELL, that lasted 2 months. It is now in to be replaced. Have not got it yet. But because of their rotten attitude and horrible so called customer service. I am looking for another router. Below is a list of what I have and what needs to be connected. The room that the router has to service is 27Ft. X 32Ft.
Main computer is a Dell 8300 4 months old with Windows 7 installed
Second computer is a custom computer with Windows XP Pro. This is 5 years old but works great.
2 internet radios, a Logitech Squeezebox and a Squeezebox Boom
Netflex receiver that streams movies to my television
I have a copier, printer and fax machine attached to the Dell computer
Solved!
Go to Solution.

Looking at the distance of wireless devices a basic router can work very well in your network, But you also have Audio/Video Streaming Devices in the Network So would Like to Recommend E3000 with Key Features
Key Features
Enjoy the power of high-performance Wireless-N technology—optimized for wireless entertainment
Connect your computers, gaming consoles, Internet-enabled HDTVs and Blu-Ray players, and other wireless devices at up to 300 Mbps of transfer speeds
Enjoy the benefits of simultaneous dual-band (2.4 GHz and 5 GHz), including smoother HD video streaming, wireless gaming and file transfers
Share your files at home or on the Internet by connecting a storage device to the Linksys E3000's built-in USB port
Stream video and media content via a built-in UPnP AV media server to an Xbox 360, PS3 or other compatible device
Use four Gigabit Ethernet (10/100/1000 Mbps) ports for faster file sharing with other Gigabit-enabled devices, including computers, hard drives, and servers
Set up your wireless network in a few simple steps using included Cisco Connect software
Keep wireless freeloaders and Internet threats at bay with customizable security settings, including WPA/WPA2 Personal and SPI firewall protection
Give visitors password-protected Internet access on a separate network—so your visitors have access to the Internet, but not your computers or data
Use Cisco Connect's Parental Controls to block specific websites and restrict Internet access during certain hours
Customize your network using easily accessible Advanced Settings

Similar Messages

HT1695 I NEED SOME HELP CONNECTING TO MY NEW IPAD

yes i need some help to set my new ipad can u plz help

http://help.apple.com/ipad/5/interface/
Stedman

I need some help on installing the new flash

I have ADD and can get off topic but i will try my best. I have a couple of questions. I am running windows xp home 32 bit. I have IE8, opera and firefox. Is flash version 11.1.102.62 the newest flash? If so then two questions. One when i test my flash with IE it tells me tthe newest version and i'm able to go to the adobe site to upgrade to the right version. However on firefox it does the same thing but then takes me to version 10.3.183.16? I don't know why but i think it happened the last upgradeand i upgraded with opera. So I can update with opera but it doesn't give my the full version numberof the upgrade. Question is are the links you offer, are they for version 11.1.102.62? and if so where do they end up being downloaded to? I'm a pain in the butt but I always have problems when I'm upgrading flash and I decided to ask questions.

Hello John,
Welcome to Adobe Flash Player Forums,
Download and Run Adobe Flash Player uninstaller from here :
http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
Direct link for Flash Player 11 (Internet Explorer)
http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_playe r_11_active_x_32bit.exe
Direct link for Flash Player 11 (Other Browser)
http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_playe r_11_plugin_32bit.exe
Download both the setups and run them one by one
Note : Make sure no browsers are running when you are running these .exe files
Hope this helps.
Thanks,
Vikram

HT204291 When am watching live news on air play it shows only for one minute 30 seconds I need some help?

When am watching live news on air play it only shows for one minute 30 seconds ,, I need some help?

First of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug

I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit content without actually downloading the explicit songs?

I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit songs without actually downloading the songs that are explicit?

See if there's a non-explicit version and download that? Just download the individual songs you want, and not the others?
Honestly, your phrasing doesn't make sense. You're asking how to download an album without downloading its tracks?

HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I bought a new song, but it won't play on my Mac or iPod. Everything is up to date. I need some help.

I bought a new song on itunes, but for some reason it won't play on my itunes library or Ipod. It skips to another song. Need some help on this if you can spare your time.

Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best of luck,
Mario

TS1702 New IPhone4s using primarily for Internet overseas and FaceTime states it is waiting to activate need some help

Need some help activating my face time on my new phone. Am overseas and not in phone range so trouble shooting is difficult

I maybe completely off base (i don't have t-mobile) but it was my understanding that you would still need a 'data' plan for a) most of the applications to work and b) to receive service books etc and that the wi-fi would only give you access to 'website' and not the email etc.
If the unit is rebooting, then it would be sign of a bad BB, I would recommend reinstalling the OS using the desktop manager but if you just got the unit and are still in the 15-30 day period (not sure how long t-mobile does a return) I would ask for a replacement unit.
Again, not sure on the top part so hopefully someone else may have an answer for you.

Need Some Help...I cannot sync my hold "notes" with iCloud. only the new one appears on iCloud!

Need Some Help...I cannot sync my hold "notes" with iCloud. only the new one appears on iCloud!

i'm using an iphone4

Need to try to find Pi, need some help

I have need to try to find some of the values of Pi,
but when i try math.PI i only get down to like 8 decimals.
I need some help.
Not sure were to start either!
Message was edited by:
Aten

You're just adding terms together. There's a series of them, so you need a loop. Each pass through the loop could add one more term. Note that each term has a denominator that is bigger by 2, and it's either added or subtracted (or to look at it another way, you're adding negatives alternately).
The main issue is how accurate you want it to be. You can't add the digits together forever. So you have to choose a stopping point. You can stop based on a time period (when you've run out of time, stop adding new terms) or on precision (when two subsequent values are close enough to each other, stop).
You'll probably want to use java.math.BigDecimal.
If you give some more details about the assignment I can make some more suggestions.
Why don't you give it a try and see how it works?

Please i need some help time capsule and airport express wireless extender

hello everyone and thank you for looking at my post. i do need some help. i am not very good at the computer programing so i might not use the right terms. i have a time capsule that i just replaced an old pc type router with. i have a fairly large house and can not get wireless signal to the one end of my house. so i went to the apple store and bought an airport express after being told how its just plug and play and itll setup with my time capsule and waala iv just extended my wireless signal. well it did not seam to work that well for me. i have done all the setting up that was told me to in the book to do and i still have get to get a wireless signal out of the express i then hooked up an ethernet wire from the express to my girlfriends macbook. and what do you know now im seeing the express in my airport utility. but then i unplug the ethernet and im back to not seeing the express. what am i doing wrong and what do i need to do. please help me if you can. thanks alot.

Hello fastuca. Welcome to the Apple Discussions!
Let's double-check your base stations' settings ...
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the Time Capsule (TC).
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the 802.11n AirPort Express Base Station (AXn) that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility)

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

TS1702 I need some help the apps were downloading slowly

The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
The iOS 6 update didn't work.
Please I need some help.
The apps didn't download.
Talking Angela and Ginger didn't download.
Talking Santa didn't update.

Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. The backup file is located here. You can delete that backup once you get a successfull backup.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

Probably a good question to ask Viber or look at their support site.

I need some help in choosing a new router

Similar Messages

Maybe you are looking for