I need some help removing light from a stage light from the shot.

Hey there,
Recently I shot a music video in a location that worked really well.
However upon uploading the footage onto Adobe Premiere CS6 onto mac and looking back at the footage there is a huge stage light that is on in the corner of the shot,
(rookie framing error I know!)
Naturally the huge stage light (which is yellow/white) was producing a lot of light flare.
I was wondering if there was any way of seriously reducing or, if possible, completely removing the light that the stage light is producing?
Any Ideas?
Thanks!
Conor

Hi there,
I thought when dealing with AWTcomponents suchs as Frames, everything is already running on the event-dispatch thread.
As far as my understanding goes it is only with swing components (which is what the article you posted is about) such as JFrames, JButtons,etc that are required to be put in the event dispatched thread....
Am i wrong?

Similar Messages

Needed some help transferring files from Mac to external hard drive

Hey guys, I just needed some urgent help.
My friend wanted some files to be transferred to his external hard drive from my Mac. As he is a Windows user, I guess his hard drive is formatted for Windows as well. As I plug in the hard disk in my Mac, I can't transfer the files. It says something like "the disk cannot be modified".
So, please help me on how can I transfer this files from my Mac and if I do format it to work with the Mac, will it work for Windows later?
Please help!
Cheers
Sam

The Windows drive is probably formatted NTFS which is not natively writable
by the Mac. It should be formatted as FAT32 to be usable on both.
Dave

Need some help extracting images from blobs...

hi,
I want to upload a image to a oracle blob and then download it and display it into a browser using jsp. I am new to java as will as oracle and doing a project for the first time. I have searched the internet and found out some links:
http://fdegrelle.over-blog.com/article-992927-6.html
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:232814159006
http://forums.devx.com/archive/index.php/t-142347.html
I feel the solutions given are very vogue and also tried the solutions posted in java forums itself. I would like to have simple example, step by step explanation for uploading an image into a oracle blob,download the image and display it in a browser using a jsp so that i can understand the concepts.
Thank you SUN and JAVA PROGRAMMERS.

thanks yogee,
The creators of these examples have assumed that the developers are advanced users. I am not an advanced user. I am not even a intermediate user.
1.....................................I understood this(Create Table)
create table demo
( id        int primary key,
theBlob    blob
)/2...................................I understood this too(I suppose we are mapping the folder path)
create or replace directory my_files as '/export/home/tkyte/public_html';3..................................I understood this too(upload the file into the blob)
declare
    l_blob    blob;
    l_bfile    bfile;
begin
    insert into demo values ( 1, empty_blob() )
    returning theBlob into l_blob;
    l_bfile := bfilename( 'MY_FILES', 'aria.gif' );
    dbms_lob.fileopen( l_bfile );
    dbms_lob.loadfromfile( l_blob, l_bfile,
                               dbms_lob.getlength( l_bfile ) );
    dbms_lob.fileclose( l_bfile );
end;
/4..................................we are creating a package here. I got it.
create or replace package image_get
as
    procedure gif( p_id in demo.id%type );
end;
/5...................................we are suppose to use this to extract the file from the blob. But where does this get stored?
create or replace package body image_get
as
procedure gif( p_id in demo.id%type )
is
    l_lob    blob;
    l_amt    number default 30;
    l_off   number default 1;
    l_raw   raw(4096);
begin
    select theBlob into l_lob
        from demo
         where id = p_id;
        -- make sure to change this for your type!
    owa_util.mime_header( 'image/gif' );
        begin
           loop
              dbms_lob.read( l_lob, l_amt, l_off, l_raw );
              -- it is vital to use htp.PRN to avoid
              -- spurious line feeds getting added to your
              -- document
              htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
              l_off := l_off+l_amt;
              l_amt := 4096;
           end loop;
        exception
           when no_data_found then
              NULL;
        end;
end;
end;
/6...............................Execute the procedure!
exec image_get
7..................................What after this step?
I do not know servlets. I only know JSP? If you can please write a simple servlet to access the data and display it on the browser
Sample servlet code is in the link as a last user comment. I couldn't understand head or tail.
http://forums.devx.com/archive/index.php/t-142347.html
I appreciate your help.
Message was edited by:
ted_anderson

I need some help when exporting from premiere, my audio will not export.

I am editing a vosot, I have a voiceover track and an interview track. When I play the project back, both are there and play fine, however when I go to export it, there is no audio.
I really need help ASAP! Thank you.

Firmware is basically the internal OS (operating system) software in which your iPod runs on.
A "Firmware update" can be found in iTunes (if you aren't updated to the latest version of internal software for your iPod), which updates your iPod's OS (operating system).
New firmware update versions usually do not make a noticable change on your iPod, unless the last firmware update contained a bug, where is slowed your iPod down, for example, and the new firmware is tweaked from the last version, and doesn't slow down your iPod anymore.
Also, iTunes and your computer will call a firmware update/software the "firmware files", because a computer will read what an update contains, by how its files are... just another bit of info.
I hope that explains it.
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

I need some help I updated my ipad last night to the new ios....but it deleted all the applications on it? Any way that I can restore the ipad to what it was before I updated it? Or is there a way to get them all back?

Can anyone help?

That's part of the process - the upgrade removes all the apps and then (as part of the syncing) restores them all - however, it's not clear that it's doing that. Connect your iPad to iTunes again and sync it - the apps should come back. If not, then the upgrade created a back-up of your device before installing - you can restore your iPad to that back-up when connected to iTunes.

TS3694 enyone???.....i need some help,...please...i have the 1611 code error,the phone does nothyng,he does.t restart,in the phone main screen,he show me to conect with itunes and that.s it,i think it.s block....what can i do???????

Hy everyone!!!...please, help me,i realy dont no what else can i do,the phone its block i think,cus give me the1611 code error at the time i want to reiniciatet or restarded(with itunes or without);thanks!

hey...!!!!!! i am also facing the same problem but my error code was 1602 and now after that problem my iphone got connected to ituns but it is showng restore option afte doing once....its again showing that option ..........help me if you know something

I need some help on how i can request to cancel the weekly updates n renewal that was charging my credit card.

hi anybody help me on how can i request to cancel the weekly renewal of the voice on i tunes. it charged me every week on my creditcard billing.my son alreadyy deleted it on his ipad but continually charging us. please guide us it costs us 2dollars wkly

ciedevera wrote:
hi anybody help me on how can i request to cancel the weekly renewal of the voice...
1) see here...
iTunes Store: Purchasing and managing auto-renewing subscriptions
2) Contact the developer...
3) If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

My iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
Let me know!
xeni

My airport problem has returned big time --Need some Help!!

Aloha once again:
I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
Dan Page
Maui, Hawaii
The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
Still need some help!!!
Dan

First, power off both the Time Capsule and AirPort Express.
Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible.
Please report on your results.

I need some help uninstalling Acrobat 8 that did not completly install because of I believe my Windo

I need some help removing, uninstalling Adobe Acrobat 8 that did not completely install because of I believe my computers operating system Windows 7 Ultimate. I purchased Adobe Acrobat XI and it will not install until I remove the old Adobe Acrobat 8.

Hi Wzachare,
http://helpx.adobe.com/acrobat/kb/manually-remove-acrobat-8-windows.html may help.
Thanks!
Eshant

Need some help to unlock the Ipad. Cannot contact the previous owner he is in the shelter and I do not know were. After I restore the Ipad is asking that the previous owner has to remove it from his account

need some help to unlock the Ipad. Cannot contact the previous owner he is in the shelter and I do not know were. After I restored the Ipad is asking that the previous owner has to remove it from his account

Nobody on these boards or at Apple will unlock that device for you. Sorry.
(117810)

HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone. Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the

The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000). Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the phone. I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone. I've read as many articles as I can find, but still cannot manage this. Thanks for any help.

Open itunes, connect iphone, select what you want, sync

Need some help with a remove function

Design and code a program that will maintain a list of product names. Use a String type to represent the product name and an array of strings to implement the list. Your program must implement the following methods:
Add a product to the list
Remove a product from the list
Display then entire list
Find out if a particular product is on the list.
You need to create a command command loop with a menu() function. The program must continue asking for input until the user stops.
This is the assignment and this is what I have so far. I need some help writing the remove function.
Thanks
* Title: SimpleSearchableList.java
* Description: this example will show a reasonably efficient and
* simple algorithm for rearranging the value in an array
* in ascending order.
public class SimpleSearchableList {
     private static String[] List = new String[25]; //These variables (field variables)
     private static int Size; //are common to the entire class, but unavailable
     //except to the methods of the class...
     public static void main(String[] args)
          String Cmd;
          for(;;) {
               Menu();
               System.out.print("Command: ");
               Cmd = SimpleIO.inputString();
               if(Cmd.equals("Quit"))
                    break;
               else if(Cmd.equals("Fill"))
                    FillList();
               else if(Cmd.equals("Search"))
                    SearchList();
               else if(Cmd.equals("Show"))
                    ShowList();
               else if(Cmd.equals("Remove"))
                    Remove();
     //Tells you what you can do...
     public static void Menu()
          System.out.println("Choices..................................");
          System.out.println("\tFill to Enter Product");
          System.out.println("\tShow to Show Products");
          System.out.println("\tSearch to Search for Product");
          System.out.println("\tRemove a Product");
          System.out.println("\tQuit");
          System.out.println(".........................................");
     //This method will allow the user to fill an array with values...
     public static void FillList()
          int Count;
          System.out.println("Type Stop to Stop");
          for(Count = 0 ; Count < List.length ; Count++)
               System.out.print("Enter Product: ");
               List[Count] = SimpleIO.inputString();
               if(List[Count].equals("Stop"))
                    break;
          Size = Count;
     //This method will rearrange the values in the array so that
     // go from smallest to largest (ascending) order...
     public static void SearchList()
          String KeyValue;
          boolean NotFoundFlag;
          int Z;
          System.out.println("Enter Product Names Below, Stop To Quit");
          while(true)
               System.out.print("Enter: ");
               KeyValue = SimpleIO.inputString();
               if(KeyValue.equals("Stop")) //Note the use of a method for testing
                    break; // for equality...
               NotFoundFlag = true; //We'll assume the negative
               for(Z = 0 ; Z < Size ; Z++)
                    if(List[Z].equals(KeyValue)) {
                         NotFoundFlag = false; //If we fine the name, we'll reset the flag
          System.out.println(List[Z] + " was found");
               if(NotFoundFlag)
                    System.out.println(KeyValue + " was not found");
     //This method will display the contents of the array...
     public static void ShowList()
          int Z;
          for(Z = 0 ; Z < Size ; Z++)
               System.out.println("Product " + (Z+1) + " = " + List[Z]);
     public static void Remove()
}

I need help removing a product from the arrayYes. So what's your problem?
"Doctor, I need help."
"What's wrong?"
"I need help!"
Great.
By the way, you can't remove anything from an array. You'll have to copy the remaining stuff into a new one, or maybe maintain a list of "empty" slots. Or null the slots and handle that. The first way will be the easiest though.

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I need some help removing light from a stage light from the shot.

Similar Messages

Maybe you are looking for