I need some help when exporting from premiere, my audio will not export.

I am editing a vosot, I have a voiceover track and an interview track. When I play the project back, both are there and play fine, however when I go to export it, there is no audio.
I really need help ASAP! Thank you.

Firmware is basically the internal OS (operating system) software in which your iPod runs on.
A "Firmware update" can be found in iTunes (if you aren't updated to the latest version of internal software for your iPod), which updates your iPod's OS (operating system).
New firmware update versions usually do not make a noticable change on your iPod, unless the last firmware update contained a bug, where is slowed your iPod down, for example, and the new firmware is tweaked from the last version, and doesn't slow down your iPod anymore.
Also, iTunes and your computer will call a firmware update/software the "firmware files", because a computer will read what an update contains, by how its files are... just another bit of info.
I hope that explains it.
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Similar Messages

  • Need Some Help...I cannot sync my hold "notes" with iCloud. only the new one appears on iCloud!

    Need Some Help...I cannot sync my hold "notes" with iCloud. only the new one appears on iCloud!

    i'm using an iphone4

  • Help!!! Premiere Proc CC will not let me Export!?!?!?!

    Helo,
    I have Creative Cloud for my Pc. I downloaded Premiere Pro CC onto my Pc. I had made a video, and exported it already. When I was going through the video again I found a mistake, so I deleted that video, went into Primere Pro CC and fixed the mistake. But now, Premiere Pro CC will not let me export the video?!?! It lets me click on the export, but it wont let me click on media, or any other options except forBatch List, AAF, and Final Cut Pro XML.
    Also, in my apps section od Creative Cloud, it says that Premiere Pro CC has an update and that it has "Bug Fixes"... When I go to update it, it says that the update failed because it cannot locate the files?!?!
    Thank you for your help!

    Be sure the sequence is highlighted before trying to export.
    Not sure on the update.

  • Needed some help transferring files from Mac to external hard drive

    Hey guys, I just needed some urgent help.
    My friend wanted some files to be transferred to his external hard drive from my Mac. As he is a Windows user, I guess his hard drive is formatted for Windows as well. As I plug in the hard disk in my Mac, I can't transfer the files. It says something like "the disk cannot be modified".
    So, please help me on how can I transfer this files from my Mac and if I do format it to work with the Mac, will it work for Windows later?
    Please help!
    Cheers
    Sam

    The Windows drive is probably formatted NTFS which is not natively writable
    by the Mac. It should be formatted as FAT32 to be usable on both.
    Dave

  • Need some Help with exporting as a .PDF !

    I have been trying to Export / Save As in Photoshop an image as a PDF. Whenever it is exported my image is about half the size as it used to be.
    I am exporting from Photoshop a CMYK image that is 1500 X 1050 and it downsizes it to about 360 x 252. I choose PDF in the Save As and Press Quality. I also made sure that it wasn't downsampling to a lower DPI. I used "Do Not Downsample".
    What is really strange is that I have tried multiple times with different versions of a file in different programs like Illustrator and InDesign and the same thing happens everytime. I am using Adobe Creative Suite CS4 and a Macbook OS 10.6.8 with Snow Leopard and have just recently updated my computer. If anyone has any ideas as to why this is happening I would love your feedback as I have been frustratingly working on this the past 4 hours. Thank you!!!

    I was creating notecards to be printed at a print shop. I did figure out what was happening though, my computer was showing the dimensions wrongly. Even though the dimensions were displayed as this:
    My images were at the correct dimensions but not showed properly. Thanks so much for the help though, I'm glad to have it when I need it!

  • Need some help extracting images from blobs...

    hi,
    I want to upload a image to a oracle blob and then download it and display it into a browser using jsp. I am new to java as will as oracle and doing a project for the first time. I have searched the internet and found out some links:
    http://fdegrelle.over-blog.com/article-992927-6.html
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:232814159006
    http://forums.devx.com/archive/index.php/t-142347.html
    I feel the solutions given are very vogue and also tried the solutions posted in java forums itself. I would like to have simple example, step by step explanation for uploading an image into a oracle blob,download the image and display it in a browser using a jsp so that i can understand the concepts.
    Thank you SUN and JAVA PROGRAMMERS.

    thanks yogee,
    The creators of these examples have assumed that the developers are advanced users. I am not an advanced user. I am not even a intermediate user.
    1.....................................I understood this(Create Table)
    create table demo
    ( id        int primary key,
      theBlob    blob
    )/2...................................I understood this too(I suppose we are mapping the folder path)
    create or replace directory my_files as '/export/home/tkyte/public_html';3..................................I understood this too(upload the file into the blob)
    declare
        l_blob    blob;
        l_bfile    bfile;
    begin
        insert into demo values ( 1, empty_blob() )
        returning theBlob into l_blob;
        l_bfile := bfilename( 'MY_FILES', 'aria.gif' );
        dbms_lob.fileopen( l_bfile );
        dbms_lob.loadfromfile( l_blob, l_bfile,
                                   dbms_lob.getlength( l_bfile ) );
        dbms_lob.fileclose( l_bfile );
    end;
    /4..................................we are creating a package here. I got it.
    create or replace package image_get
    as
        procedure gif( p_id in demo.id%type );
    end;
    /5...................................we are suppose to use this to extract the file from the blob. But where does this get stored?
    create or replace package body image_get
    as
    procedure gif( p_id in demo.id%type )
    is
        l_lob    blob;
        l_amt    number default 30;
        l_off   number default 1;
        l_raw   raw(4096);
    begin
        select theBlob into l_lob
            from demo
             where id = p_id;
            -- make sure to change this for your type!
        owa_util.mime_header( 'image/gif' );
            begin
               loop
                  dbms_lob.read( l_lob, l_amt, l_off, l_raw );
                  -- it is vital to use htp.PRN to avoid
                  -- spurious line feeds getting added to your
                  -- document
                  htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
                  l_off := l_off+l_amt;
                  l_amt := 4096;
               end loop;
            exception
               when no_data_found then
                  NULL;
            end;
    end;
    end;
    /6...............................Execute the procedure!
    exec image_get
    7..................................What after this step?
    I do not know servlets. I only know JSP? If you can please write a simple servlet to access the data and display it on the browser
    Sample servlet code is in the link as a last user comment. I couldn't understand head or tail.
    http://forums.devx.com/archive/index.php/t-142347.html
    I appreciate your help.
    Message was edited by:
    ted_anderson

  • Need some help with exporting. Any advice welcome.

    Hey everyone,
    I shoot and edit mostly wedding videos using my Panasonic HMC40 HD camera, and shoot in 720p. I am looking for any advice that you have learned yourself, or maybe see something I am doing completly wrong, and let me know.
    Here we go: My normal workflow is to shoot my footage, and then use the "Log and Transfer" option in FCP7. Once it has completed, I start the editing process, by cutting, adding effects, slowing things down to about 50%, and adding some black and white. (simple stuff). Most of my timelines for these videos turn out to be around 20 minutes. Once everything is completed, I choose, "Export, to Quicktime Movie"
    Here are my current settings:
    Once I proceed to export, this is where my problem comes in.
    for a 20 min video, it is taking roughly 2-3 hours for export to a .mov file. Seems pretty unacceptable to me... (maybe this is normal though?...)
    I am currently using a MacBook Pro, and here are my computer specs:
    Please bring ALL and ANY advice, I switched from PC a while back, and am having a hard time figuring everything out on my own, so I hope someone can help!
    Thanks for not beating me up too bad, if im doing some noob errors.

    So now im really confused...
    I did exactally what you said, and it switched to the following settings:
    And it seems to be acting about the same:
    Could it be because I have a "Apple Motion" file in there? (I know that clip happens to be 29.97)

  • I need some help removing light from a stage light from the shot.

    Hey there,
    Recently I shot a music video in a location that worked really well.
    However upon uploading the footage onto Adobe Premiere CS6 onto mac and looking back at the footage there is a huge stage light that is on in the corner of the shot,
    (rookie framing error I know!)
    Naturally the huge stage light (which is yellow/white) was producing a lot of light flare.
    I was wondering if there was any way of seriously reducing or, if possible, completely removing the light that the stage light is producing?
    Any Ideas?
    Thanks!
    Conor

    Hi there,
    I thought when dealing with AWTcomponents suchs as Frames, everything is already running on the event-dispatch thread.
    As far as my understanding goes it is only with swing components (which is what the article you posted is about) such as JFrames, JButtons,etc that are required to be put in the event dispatched thread....
    Am i wrong?

  • I need some help uninstalling Acrobat 8 that did not completly install because of I believe my Windo

    I need some help removing, uninstalling Adobe Acrobat 8 that did not completely install because of I believe my computers operating system Windows 7 Ultimate.  I purchased Adobe Acrobat XI and it will not install until I remove the old Adobe Acrobat 8.

    Hi Wzachare,
    http://helpx.adobe.com/acrobat/kb/manually-remove-acrobat-8-windows.html may help.
    Thanks!
    Eshant

  • HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

    I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Need some help here on the proper settings for quicktime exporting from imovie that won't degredate the footage from my handycam

    need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200

    What are the existing settings iMovie?
    Al

  • Need some help in debugging this exported script

    Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
    Forward engineering generated DDL script
    IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
    DROP TABLE [dbo].[Table1]
    GO
    CREATE TABLE [dbo].[Table1] (
    [test] CHAR(10) NOT NULL
    , [test2] CHAR(10) NULL
    GO
    ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
    [test]
    GO
    GO
    IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
    DROP TABLE [dbo].[Table2]
    GO
    CREATE TABLE [dbo].[Table2] (
    [test2] CHAR(10) NOT NULL
    GO
    ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
    [test2]
    GO
    GO
    ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
    [test2]
    REFERENCES [dbo].[Table2] (
    [test2]
    GO
    GO
    When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
    DECLARE
    v_temp NUMBER(1, 0) := 0;
    BEGIN
    BEGIN
    SELECT 1 INTO v_temp
    FROM DUAL
    WHERE EXISTS ( SELECT *
    FROM objects
    WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
    AND TYPE IN ( N'U' )
    EXCEPTION
    WHEN OTHERS THEN
    NULL;
    END;
    IF v_temp = 1 THEN
    TRUNCATE TABLE Table1;
    END IF;
    END;
    CREATE TABLE Table1
    test CHAR(10) NOT NULL,
    test2 CHAR(10)
    ALTER TABLE Table1
    ADD
    CONSTRAINT Table1_PK PRIMARY KEY( test );
    --SQLDEV:Following Line Not Recognized
    DECLARE
    v_temp NUMBER(1, 0) := 0;
    BEGIN
    BEGIN
    SELECT 1 INTO v_temp
    FROM DUAL
    WHERE EXISTS ( SELECT *
    FROM objects
    WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
    AND TYPE IN ( N'U' )
    EXCEPTION
    WHEN OTHERS THEN
    NULL;
    END;
    IF v_temp = 1 THEN
    TRUNCATE TABLE Table2;
    END IF;
    END;
    CREATE TABLE Table2
    test2 CHAR(10) NOT NULL
    ALTER TABLE Table2
    ADD
    CONSTRAINT Table2_PK PRIMARY KEY( test2 );
    --SQLDEV:Following Line Not Recognized
    ALTER TABLE Table1
    ADD
    CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
    --SQLDEV:Following Line Not Recognized
    ;

    Pl do not post duplicates - Need some help in debugging this script

  • Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

    Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

    Probably a good question to ask Viber or look at their support site.

  • Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it. Update it to IOS 7.1.1

    Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it and still cannot be fixed. I updated it to IOS 7.1.1 recently only, does it have connection with the inconvenience I am experiencing right now? What should I do? Thanks!

    Hi Melomane1024,
    If you are still having issues with your iPhone’s speaker, you may want to look at the steps in this article -
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a hard drive.

    i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.

    If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD.  Files can sometimes go bad and become corrupted.  As to how or why that happens, there are a number of ways.
    What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
    iTunes: How to convert a song to a different file format
    B-rock

Maybe you are looking for