I need some help with my ipod-the screen is frozen on do not disconnect

this morning i went to sync my ipod with itunes to update it but when i plugged it in to my computer it said do not disconnect but the screen froze before it even connected to itunes.... now the screen is frozen on do not disconnect and the ipod won't even turn off. anyone have any suggestions?

Try Resetting your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen

Similar Messages

Ok I need some help with sync ipod.Do I need to uncheck apps after sync is comple

Ok I'm new to all of this.We have dial up internet so we use local wifi at a cafe.We purchased some games and songs last night and today connected the ipod this morning to charge and it started syncing,took a while but it added the music to the library and the new game apps to the apps.Now In itunes at my devices "ipod" and selecting apps,the top box is checked "sync apps" and all the new apps under sort by kind are checked,in purchases there is a check by all the songs we purchased.Do I need to uncheck the apps and songs before disconnecting the ipod? I don't want to delete anything from my ipod the next time I sync it.I someone could please explain.Thanks so much

wendyfrommullins wrote:
Super,so after syncing is complete just leave everything alone and disconnect the ipod after charge is complete correct? ....
Correct...
wendyfrommullins wrote:
... So If I want to remove a newly added app just uncheck it
Yes...

Need some help with all of the jumper settings.

Wow, this has been some ordeal. I inherited a G4 iMac from a friend, which has been a great deal of trouble to me, particularly with the jumper settings. Anybody like dealing with that? Come on down...
So here's my situation. The hard drive in the iMac was dead. No big deal I'll just replace it, so I got a drive which I'm SURE is compatible. I plugged it in paying little attention to the jumper settings on it because until the beginning of this ordeal I knew nothing about jumper settings.
Now this is where it starts making no sense... I booted the computer while holding down the mouse button to eject, then put in a 10.2 OS disc, and then restarted holding C to boot from the install disc. It loaded fine but when I got to the installation step where I pick a drive to install it to, there were NO drives in the menu.
Maybe it needs to be formatted, right? WRONG. From the install screen I clicked open disc utility, and found the drive there in the list. It recognizes the drive, so why can't I install to it? I tried reformatting the drive as Mac os extended or whatever, and this made no difference.
This is where the jumpers come into play. I can't find jumper settings anywhere online for the DVD-RW Pioneer DVR-104PC Superdrive, so I've left the jumper on the optical drive alone and tried toying with the jumper settings on the HD instead, but I tried every possible setting and none of them worked to allow the installer to see my hard drive.
So what do you all think the deal is? If you know what the various jumper positions are for this particular optical drive, by all means let me know so I can toy around some more. Or if you know an alternate solution other than what I've suggested, please share. I've already invested money in a drive, some thermal paste, and Torx screwdrivers for this thing, so I really just want to get it working.... Let me know...

Hey Michael,
Here's the link to the WD support site:
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=84
My experience with WDs is that when they need to be "Master single" I use no jumper. That's in most Mac setups including the iMac G4s. Which drove me nutz until I figured that out. All other manufactures I've run into need a jumper across the first pair on the left as you look at it from the back. WD is the odd man out.
Also if you Google:
"western digital jumpers" the 2nd response you get is from OWC (macsales.com) and they're telling you to use the slave setting. Don't know about that I've always used no jumpers but I see a lot of hard drives so next time..
Richard

HT4528 hello, i need some help with turning off the 'find my iphone'

I just traded in my iphone for the 5s and Verizon is having some problems deactivating the find my iphone thing on my old phone however it still has it linked up with my old email address that was stolen from me, how do I reset it so I can use my current email address to use my current password?

There is a link to download App Builder when you sign in to the DPS Dashboard (http://digitalpublishing.acrobat.com). There is also a link on the DPS install help page.
http://helpx.adobe.com/digital-publishing-suite/help/installing-digital-publishing-tools.h tml

I NEED SOME HELP WITH UPDATING MY IPOD TOUCH PLEASE

i need some help with my ipod the version is 3.1.3 and every time I'm trying to update it says it can not be restored then it says unknown error so i need some help updating my ipod to version 4.2

If you mean you're trying to update your ios go to settings/general/software update. then you should see the latest ios just tap it and it will automatically update your ipod. If you're trying to restore your ipod (as it's not quite clear in your query) try doing it through itunes instead of on the device itself

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Hi i need some help im having problems the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums

hi i need some help im having problems , the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums . what can i do to turned on .
its an ipod touch 64gb

That symptom is covered here:
iPod touch: Hardware troubleshooting

Please I need some help with a table

Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
    totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
Craig

Hi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
    extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
    dp = dialog;
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
public tablePanel() {
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
private void jbInit() throws Exception {
    jPanel.setLayout(borderLayout1);
    scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
    this.add(jPanel);
    jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
    scrollPane1.getViewport().add(table);
    jPanel.setOpaque(true);
    newTable();
    addToModel();
    addRows();
    setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
    String name = (String) table.getValueAt(i, 1);
    if (!"".equals(name)) {
      if (i != table.getRowCount() - 1) {
        double dt = Double.parseDouble(name);
        total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
    model = new DefaultTableModel(data, columnNames) {
    table = new JTable() {
      public Component prepareRenderer(TableCellRenderer renderer,
                                       int row, int col) {
        Component c = super.prepareRenderer(renderer, row, col);
        if (printing) {
          c.setBackground(getBackground());
        else {
          if (row % 2 == 1 && !isCellSelected(row, col)) {
            c.setBackground(getBackground());
          else {
            c.setBackground(new Color(227, 239, 250));
          if (isCellSelected(row, col)) {
            c.setBackground(new Color(190, 220, 250));
        return c;
    table.addMouseListener(new MouseAdapter() {
      public void mouseClicked(MouseEvent e) {
        if (e.getClickCount() == 2) {
        if (e.getClickCount() == 1) {
          if (table.getSelectedColumn() == 1) {
   table.setTableHeader(null);
    table.setModel(model);
    scrollPane1.getViewport().add(table);
    table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
    Object[] data = {
        "Price", "5800"};
    model.addRow(data);
public void addRows() {
    int rows = 20;
    for (int i = 0; i < rows; i++) {
      Object[] data = {
      model.addRow(data);
public void printOut() {
    PrinterJob pj = PrinterJob.getPrinterJob();
    pj.setPrintable(tablePanel.this);
    pj.printDialog();
    try {
      pj.print();
    catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
    Graphics2D g2 = (Graphics2D) g;
    g2.setColor(Color.black);
    int fontHeight = g2.getFontMetrics().getHeight();
    int fontDesent = g2.getFontMetrics().getDescent();
    //leave room for page number
    double pageHeight = pageFormat.getImageableHeight() - fontHeight;
    double pageWidth = pageFormat.getImageableWidth();
    double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
    double scale = 1;
    if (tableWidth >= pageWidth) {
      scale = pageWidth / tableWidth;
    double headerHeightOnPage = 16.0;
    //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
    //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
    double tableWidthOnPage = tableWidth * scale;
    double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
    int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
    double pageHeightForTable = oneRowHeight *numRowsOnAPage;
    int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
    if (pageIndex >= totalNumPages) {
      return NO_SUCH_PAGE;
    g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
    g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
    g2.translate(0f, headerHeightOnPage);
    g2.translate(0f, -pageIndex * pageHeightForTable);
    //If this piece of the table is smaller
    //than the size available,
    //clip to the appropriate bounds.
    if (pageIndex + 1 == totalNumPages) {
      int lastRowPrinted =
          numRowsOnAPage * pageIndex;
      int numRowsLeft =
          table.getRowCount()
          - lastRowPrinted;
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(oneRowHeight *
                                 numRowsLeft));
    //else clip to the entire area available.
    else {
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(pageHeightForTable));
    g2.scale(scale, scale);
    printing = true;
    try {
    table.paint(g2);
    finally {
      printing = false;
    //tableView.paint(g2);
    g2.scale(1 / scale, 1 / scale);
    g2.translate(0f, pageIndex * pageHeightForTable);
    g2.translate(0f, -headerHeightOnPage);
    g2.setClip(0, 0,
               (int) Math.ceil(tableWidthOnPage),
               (int) Math.ceil(headerHeightOnPage));
    g2.scale(scale, scale);
    //table.getTableHeader().paint(g2);
    //paint header at top
    return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
    public Component getTableCellRendererComponent(
      JTable table,
      Object value,
      boolean isSelected,
      boolean isFocused,
      int row, int column) {
        setHorizontalAlignment(SwingConstants.RIGHT);
      Component component = super.getTableCellRendererComponent(
        table,
        value,
        isSelected,
        isFocused,
        row,
        column);
        if( value == null || value .equals("")){
          ( (JLabel) component).setText("");
        }else{
          double number = 0.0;
          number = new Double(value.toString()).doubleValue();
          DecimalFormat df = new DecimalFormat(",##0.00");
          ( (JLabel) component).setText(df.format(number));
      return component;
}

Need some help with a Macally enclosure and a spare internal drive

Need some help with a Macally enclousure
Posted: Oct 1, 2010 10:55 AM
Reply Email
Aloha:
I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
Any suggestions?
Dan Page

Hi-
Drivers aren't typically needed for external enclosures.
Macally has none listed for that enclosure.
The same is true for the WD drive, internal or external; no drivers.
With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
How is the external connected?
Have you tried different cables, different ports?
Bad/damaged cables are fairly common.
Have you verified connections inside of the enclosure?

Need some help with putting a folder in users directory

I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
Can any one help me out?
try {
                    String[] contactArray = parseDatFile(fc.getSelectedFile());
                    Document document = createXMLDocument(contactArray);
                    saveToXMLFile(
                    document,
                    new File(
                    "C:/Program Files/xxx/",// looks for directory for list
                    "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                } catch (Exception exc) {
                    File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                    boolean yes = true;
                    yes = f.mkdir();// creating directory
                    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// used only if the directory didn't exist
                        "xxxxxxxxxxxxxxxxxxxxxxx"));

Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

Need some help with threads...

Hello all,
I am working on a project at work, and I am not the best programmer in the world. I have been trying to get my head around this for a couple of days and just cannot get it to work.
I am writing an instrumentation control program that will have three threads. One is the GUI, one will receive control information and set up the hardware, and one will check the hardware status and report it to the GUI periodically. I plan on using the invokeLater() method to communicate the status to the GUI and change the status display in the GUI. Communication from the GUI to the controller thread and from the status thread to the controller thread I had planned on being piped input/output stream as appropriate. I have a control class and a status class that need to be communicated over these piped streams. In some trial code I have been unable to wrap the piped input/output streams with object input/output streams. I really need some help with this. Here is the main thread code:
package playingwiththreads1;
import java.io.*;*
*public class PlayingWithThreads1 {*
public static void main(String[] args) {*
* PipedOutputStream outputPipe = new PipedOutputStream();*
* ObjectOutputStream oos = null;*
* ReceiverThread rt = new ReceiverThread(outputPipe);*
// Start the thread -- First try*
* Thread t = new Thread(rt);*
t.start();*
// Wrap the output pipe with an ObjectOutputStream*
try*
oos = new ObjectOutputStream(outputPipe);*
catch (IOException e)*
System.out.println(e);*
// Start the thread -- Second try*
//Thread t = new Thread(rt);*
//t.start();*
/** Send an object over the pipe. In reality this object will be a
class that contains control or status information */
try
if (!oos.equals(null))
oos.writeObject(new String ("Test"));
catch (IOException e)
try
Thread.sleep(5000);
catch (InterruptedException e)
I read somewhere that it matters where you start the thread relative to where you wrap piped streams with the object streams. So, I tried the two places I felt were obvious to start the thread. These are noted in the comments. Here is the code for the thread.
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
private PipedInputStream inputPipe = new PipedInputStream();
private ObjectInputStream inputObject;
ReceiverThread (PipedOutputStream outputPipe)
System.out.println("Thread initialization - start");
try
inputPipe.connect(outputPipe);
inputObject = new ObjectInputStream(inputPipe);
catch (IOException e)
System.out.println(e);
System.out.println("Thread initialization - complete");
public void run()
System.out.println("Thread started");
try
if (inputObject.available() > 0)
System.out.println(inputObject.read());
catch (IOException e)
System.out.println(e);
Through testing I have determined that no matter where I start the thread, the thread never gets past the "inputObject = new ObjectInputStream(inputPipe);" assignment.
Could someone please help me with this? There are other ways for me to write this program, but this is the one that I would like to make work.
Many thanks in advance,
Rob Hix
Edited by: RobertHix on Oct 6, 2009 3:54 AM

Thanks for the help, but that did not work. I tried flushing the ObjectOutputStream and it is still hanging when initializing the thread.
Here is a better look at the code since I was helped to figure out how to insert it:
The main method:
package playingwiththreads1;
import java.io.*;
public class PlayingWithThreads1 {
    public static void main(String[] args) {
        PipedOutputStream outputPipe = new PipedOutputStream();
        ObjectOutputStream oos = null;
        ReceiverThread rt = new ReceiverThread(outputPipe);
        // Start the thread -- First try
        //Thread t = new Thread(rt);
        //t.start();
        // Wrap the output pipe with an ObjectOutputStream
        try
            oos = new ObjectOutputStream(outputPipe);
            oos.flush();
        catch (IOException e)
            System.out.println(e);
        // Start the thread -- Second try
        Thread t = new Thread(rt);
        t.start();
        /* Send an object over the pipe. In reality this object will be a
         * class that contains control or status information */
        try
            if (!oos.equals(null))
                oos.writeObject(new String ("Test"));
                oos.flush();
        catch (IOException e)
            System.out.pringln(e);
        try
            Thread.sleep(5000);
        catch (InterruptedException e)
}The thread code:
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
    private PipedInputStream inputPipe = new PipedInputStream();
    private ObjectInputStream inputObject;
    ReceiverThread (PipedOutputStream outputPipe)
        System.out.println("Thread initialization - start");
        try
            inputPipe.connect(outputPipe);
            inputObject = new ObjectInputStream(inputPipe);
        catch (IOException e)
            System.out.println(e);
        System.out.println("Thread initialization - complete");
    public void run()
        System.out.println("Thread started");
        try
            if (inputObject.available() > 0)
                System.out.println(inputObject.read());
        catch (IOException e)
            System.out.println(e);
}Does anyone else have and ideas?

Need some help with ".png" image.

Good day everyone. Here's the run down. I need to add an
image (image "A") ontop of another image (image"B"). Image "B" is a
paterned background. And Image "A" a logo with a transparent
background.
As it stands I have image "A" as a "png" and as you know....
they are fri**ing huge! Haveing it as a "gif" only presents me with
the IE6 problem of it adding a colored background to the image.
So I'm stuck! Can any one tell me or point me in the
difection of a tutorial to tell me the best way to add an image
with a transparent background in Dreamweaver.
Really need some help with this!
Thanks all!

>Right you can see the work in progress here>
http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
Before going much further I'd recommend reconsidering the use
of a textured background. They are usually included for the benefit
of the site owner only, and likely to annoy visitors. Studies on
the subject suggest they often lead to usability problems. I do
like to header graphic, but at 200K it's kinda heavy and can
probably be optimized.

Need some help with guitar setup...

jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
digitech gnx-3
alesis sr-16
sure mic's
yamaha e203 keyboard
here's the setup:
yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
here's the problem:
everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
any help would be greatly appreciated!

anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

Need some help with MDX formula

Hello, I am not finding any good documentation on MDX formulas, there is a specific one that I need some help with....could someone please elaborate what exactly does this formula mean? thanks.
(MEASURES.[SIGNEDDATA],
CLOSINGPERIOD([%TIMEDIM%].
[%TIMEBASELEVEL%]))

If new MEASURE gets added to Measure's table , in BPC Client , etools->client Options-> Refresh Dimensions should get the new measure into the CurrentView .IF not try etools->client Options-> Clear Local application information .
Formula 2 :
(MEASURES.SIGNEDDATA,
CLOSINGPERIOD(%TIMEDIM%.
%TIMEBASELEVEL%))
This formula is used to retrieve AST & LEQ account values.
If current time member is at monthlevel ,ie ClosingPeriod of 2011.FEB is the current member it self ,and would retrieve 2011.FEB value.
If Current time member is at quarter level then ClosingPeriod of 2011.Q1 is 2011.Mar ,and would retrieve 2011.MAR value.
If Current time member is at year level then ClosingPeriod of 2011.TOTAL is 2011.DEC ,and would retrieve 2011.DEC value.
Formula 1 :
MEASURES.SIGNEDDATA
Irrespective of the level of the Time , MEASURES.SIGNEDDATA would retrieve current Time member value.This formula is used to retrieve INC & EXP account values
if current time member is at month level,2011.FEB , 2011.FEB value is retrieved.
if current time member is at quarter level,2011.Q1 , 2011.Q1(JANFEBMAR) value is retrieved.
if current time member is at year level,2011.TOTAL , 2011.TOTAL(JAN,FEB,....,DEC) value is retrieved.
Hope this helps.

I need some help with my ipod-the screen is frozen on do not disconnect

Similar Messages

Maybe you are looking for