I Need Some Prep Advise For Installing/Using a Wacom Bamboo-CS4

Hi,
     I am getting a Wacom Bamboo. My first tablet, I would like to hear suggestions on what to do to get ready settings wise in CS4 and Vista x64 HP.
     I have searched and read lots on it and see there can be some difficulties.
     So far I see in control panel/pen & input devices, it has been suggested to untick everything in there and rely on Wacoms drivers. Does this sound right?
     How about in CS4?
     I am a semi pro photographer and not really deep into CS4 experience wise but will use the tablet to brush masks and use the lasso tool for starters.
     Anything you guys can toss at me to help me have a less buggy tablet install would be great.
Thanks

Just go ahead and install it. The instructions are pretty clear.
Reports of problems relate to the more advanced functions of the more sophisticated Wacoms.
The only general problem is having the pen too near the tablet when the mouse is in use and vice versa. This can stop the painting tools from working.

Similar Messages

Need some sample documents for DME development

Hi,
I need some sample documents for DME development. I expect any information covering developing DME formats and steps for downloading a DME file (this I need for checking my formats).
please, send any relevant info you have to mail id mindaugas.kazlauskas at gmail.com
Many thanks and reward points ahead!
Regards,
Mindaugas

Hi,
the main thing is that I need format with payment information structured in single column, like this:
//separator//
value1
value2
value3
//separator//
value1
value2
value3
//separator//
maybe there is any SAP format structured like this?
Regards,
Mindaugas

Hard drive sounds louder than expected when using a wacom bamboo tablet

i hace been trying to do some illustration work in photoshop CS5 using a wacom bamboo pen tablet
however as stated this seems to make the hardrive work louder then expected and i am worried that i could over heat and break my mac if i continue to work like this,
i dont even run any other programs well working (eg; safari or i-tunes)
i'm wondering if it is because my mac dosent have enough RAM to work both photoshop and the tablet at the same time and that if i add extra this would solve the problem
the tablet is powerd through a usb port

um i dont know how much ram it has ,but i havent added any yet so what it came with is the best answer i can give to that (sorry)
how loud would the fan sound as the noise i'm getting is a loud hum that starts up after a couple of
minuets of using my tablet and then goes away if i stop

I need some XP drivers for Satellite L350D-110 PSLE8E

Hello there.
I have now my brandnew Toshiba notebook. It comes only with VISTA, a very nice looking system.
But I want to use my notebook in our office too and then I need to install XP Professional.
XP is already installed, but i need some drivers to complete the system installation.
Here is screenshot from my hardware manager (hope it will work in this forum):
http://img443.imageshack.us/my.php?image=screengmhv9.jpg
Can anybody help me?
Or is there a chance to get a downgrade option from Toshiba?? Without a downgrade I cannot use my brandnew notebook.....

For the Satellite L350D and Windows XP there are all drivers available.
I think you forget to install two or more drivers.
Here you can download it:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Search for your model and you will get a list of all drivers. Then you can compare which drivers you didnt install yet.
As Jeffrey said, I should be the AMD Processor Driver, Realtek driver and the card reader.

Need some sample data for obiee practice

Hi All,
I installed OBIEE 11.1.1.5 using SQL SERVER 2005.
Can someone help me out some sample data for practise purpose other than sampleapplite
Thanks,
SatyaB

The full version of BI Sample Application (not the lite) has a pretty good amount of sample data for practice. Have you tried using it?
http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html

Need to submit request for revoke using API

Hi,
I need to submit request for revoke application instance using the OIM API, so that once the request is raised OIM approvals should get trigger.
Could you please share some sample code to achieve this, I am able to raise the request for provisioning but facing issue while raising request for revoke.
Thanks.

Hi,
Refer this : OIMService (Oracle Fusion Middleware Java API Reference for Oracle Identity Manager)
Specify operation as RequestConstants.MODEL_REMOVE_ROLES_OPERATION
Reference : RequestConstants (Oracle Fusion Middleware Java API Reference for Oracle Identity Manager)
Thanks,
Pallavi

Need some reference book for BIW

Hi,
I need some books for BW,i am new to bw ,presently working in sap abap.
Is there any free books available in net means ,please send to me.
I thought HENDRY FU book is best ,is it available in net.
can i download that book.
Regards,
Kalidas.T

Hi Kalidas,
BI platform:
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/594e3c6bf4233fe10000000a114084/frameset.htm
performance optimization
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
analysis & repair environment
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
scheduler
http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/b7463c32a3fe13e10000000a114084/frameset.htm
FI extraction
http://help.sap.com/saphelp_bw32/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
whats new in BI 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
System administration tasks
http://help.sap.com/saphelp_bw30b/helpdata/en/d1/e81c3b85e6e939e10000000a11402f/frameset.htm
process chains
http://help.sap.com/saphelp_nw70/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
WAD screen cam
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6dd54713-0c01-0010-8691-a3576b9a95d9
BI content installation
http://help.sap.com/saphelp_nw2004s/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/frameset.htm
BI suite :Business Explorer
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/30d43b0527a17be10000000a114084/frameset.htm
BI 7.0 & EP 7.0 integration
/message/3945089#3945089 [original link is broken]
DTP's
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Extractions in BI
https://www.sdn.sap.com/irj/sdn/wiki
transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
Hendry fu is available in net...before that u follow the above links..then go for FU book.. and welcome to BW
Regards
ashwin

Need some good links for JAXB Customization

Hi all,
Please gimme some good links for JAXB customization tutorial.
cheers
JoyBoy

Hi all,
Please gimme some good links for JAXB customization tutorial.
cheers
JoyBoy

I need an optical drive for my used MacPro. Advise please?

What should I get and how to install. I'd rather not have to bring my computer to the Apple store if I can avoid it.
Thanks for your help!

https://discussions.apple.com/community/notebooks/macbook_pro
http://eshop.macsales.com/Static_Pages/index.cfm?page=superdrive0904/superdrive_ 1004.html&Title=SuperDrives

BdAqua, anyone.. I need some SERIOUS advise here..

For many of you I have been on these forums for quite sometime and now I am in need of SERIOUS advice. With the acquisition of a Power Mac G5 Quad taking over most of my everyday activities which I do on my mac pro, I am in desperate need of trying to figure out how I can get the best out of my 2009 mac pro of which I worked so hard in making it a 6-core 2010 machine.. Now I am thinking I might have gone overboard, way overboard as I am not making use of the machine and its fullest potential. I don't have really a lot of income coming in right now as I am unemployed, though I am getting a pension and unemployment, but not enough to buy serious applications for taking advantage of the power in my mac pro.
Can someone advise on how I can get the best out of my 6-core mac pro without having to spend 1000's of dollars on stuff I may or may never ever need? Other than video editing, is there any other way I can get the best out of using my machine for what its intended for? Here is what I currently use my mac pro for, thus far:
1. Everyday stuff, browsing internet, forums, emailing.
2. sometimes I will burn two dvds/cd's simultaneously, sometimes not.
3. Retro gaming though I do have some older modern games I play from time to time.
4. I had bootcamp installed, but no more as I can do most of the work I need on the OS X platform.
5. When I ever get dvds, I rip them using handbrake just to take advantage of all my cores, even though mactheripper is much faster and only uses some of the cores.
As of right now most of the above I do on my newly acquired Power Mac G5 Quad and my mac pro is on the floor, disconnected and not being used. The problem is that I got the mac pro because of its expandability and I realize my BIGGEST MISTAKE here was that it is in no way a consumer type machine, but for many years I have used desktop macs for my purposes and expansion.
This is my only intel mac, as my PB G4 is being used for my mobile computing and does everything I throw at it, Power Mac G5 does also what I through at it. The G4 Pismo is only used for OS 9 nostalgia to if I ever have a yearn to retro back to the beginning days of OS 9
Question: With my limited amount of funds, what can I do to get the best out of my Mac Pro?? I don't want to sell it for something cheaper or less, as I really do love the expansion capability of the mac pro and its case for prolonging the system. I don't plan on getting a future mac pro as for what I use it for it certainly would be a waste.
I know I have been rude to some of you and I know its been a rocky road between all of you on this forum and me, but I am now in a desperate, precarious position.. What really can I use my mac pro for other than using it like my PM G5 Quad? I am starting to also think the Quad is overkill, but nevertheless, I have a love for both Intel and PowerPC. And yes, I plan on getting Lion as I do want my mac pro to keep up with at least software and updates to the OS.
Thank you!
Romko

LOL, I think the G5s are already obsolete & a Legacy Mac as far as Apple is concerned, yet MHz per MHz they can still compete favorably with the right SW.
>Ok, can the G5 Quad still do good with elementary audio and video software?
Yes.
>What do you think? The mac pro makes a good server?
Oh yes.
>I do plan on getting Lion when it comes out for my mac pro however.
I wish I could comment on Lion, but NDA, NDA, NDA.
>Also, is it true I won't be able to charge an ipod touch with the G5's USB ports?
No iPods here, but Macs have traditionally been weak in USB amperage, I'd think if all else fails an AC powered USB hub would vertainly cure it.
>Define obsolete?
No longer supported by Apple... so what's new?
Right now Leo/10.5.x is still fairly well supported, but when a new OS hits I expect that to stop.
BTW, we're not llowed to speculate here, so call that a blind guess!

Need some advice on re-install

Hi All
I want to (well I have to) look to re-install from scratch - I am using a Macbook Black and have an issue with Ical, which meant re-installing the ical software
this is deeper routed as the ical issue is still there and althoug I have deleted the software, rebooted and re-instaleld is still there
I would like some advice, as I have done this on a windows machine (after all with windows reinstalling is a annual requirement!!!
1)Firstly is there anywhere that will advice on this process of clearing down my hardrive and reinstalling only what I need
2) can I copy my application folder to my external drive and just move back things that I wish to reinstall
3) how do I back up settings (I dont want issue with settings that may have affected my current instal and corruped Ical
4) is there any files/folders that I should definetly take a copy of
5) and is there any one with experience of doing this, eg rights and wrongs
I'm worried as I use the laptop for both work and pleasure and dont have alot of time to devote to this, with windows I could do this type of thing in about 2 hours any ideas on how long it will take
and how do I wipe the drive?
Thanks in advance

Or, Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Boot from it and make sure everything works.
Once you are certain you have a working/bootable external Firewire Drive, then run Disk Utility to Erase the Internal HD, use the Zero Data Option.

Need some design idea for a multi- thread concurrent system

I am totally new to this area. Hope ppl can give me some suggestion for the following project.
The project is using socket to deal with huge concurrent data. Server will send me more than 50K (maybe more) XML strings in a short time.
I need parse strings and save them in the data structure.
What I have done is using ExecutorService to deal with this problem. Unfortunately, it's already too slow even I don't save data into data structure.(data structure will cause synchronization problem, and make system even worse).
I was required to develop this software in a single machine and windows based OS.
Should I only use single thread to do this project? or some other strategy?
Can anybody give me some suggestion.
Thanks so much.

Peter. Thanks again.
Could you help me to take a look at this code. Appreciate that.
ThreadPool class:
protected ExecutorService threadPool = Executors.newFixedThreadPool(5);
   incoming = new Socket("127.0.0.1", port1);
   outcoming = new Socket("127.0.0.1", port2);
   out = new PrintWriter(outcoming.getOutputStream(), true);
   isr = new InputStreamReader(incoming.getInputStream());
   is = new BufferedReader(isr);
while (true) {
     String str;
     str = is.readLine();
     if (str == null) {
             cleanup();
             closeSocket();
             printout();
        } else {
                         this.threadPool.submit(new WorkerRunnable(str,
                                                         "Thread Pooled Server"));
       }WorkerRunnable class:
public void run() {
try {
            SAXBuilder builder = new SAXBuilder();
            InputSource is = new InputSource( );
            is.setCharacterStream(new StringReader(xmlString));
            org.jdom.Document doc = builder.build(is);
            org.jdom.Element root = doc.getRootElement();
            org.jdom.Element order = root.getChild("Changes");
            List orderList = order.getChildren("OrderChange");
            if (orderList.size() != 0) {
                           org.jdom.Element orderchange = (org.jdom.Element) orderList.get(0);
                           String price = orderchange.getAttribute("orderPrice").getValue();
                           String quantity = bookchange.getAttribute("orderQuantity").getValue();
                           String symbol = bookchange.getAttribute("orderName").getValue();
                            } catch(Exception e)
                          {}

Need product key number for installed Robohelp HTML

Hello,
Can anyone tell me how to determine which product key number
for Robohelp HTML X5 is used on a particular machine?
We have two X5 licenses here, but I only want to upgrade one
license on one machine. I do not know which product key number was
used to install X5 on either machine.
I'd like to maintain older projects using X5 and upgrade one
license to develop new projects using Robohelp 8.
From what I understand--and PLEASE correct me if I am
wrong--I can run both versions on the same machine as long as I
install in different folders.
Deb

I don't think there is any way of telling but suggest you
phone the activation people. If anyone knows, they should.
http://www.adobe.com/activation/phonenumbers.html
You can install RH7 on a machine with X5 but you will have
issues if you need to use RoboHelp for Word in X5. Importing Word
docs and printed documentation will still be OK.

Need to update drivers for to use my HDMI port

For some reason, the HP support program will not update my video card drivers and I cannot use an HDMI cable to connect my DVD in my computer to my Samsung TV (not a smart TV). The program to download updated HP drivers is also not working to download drivers and goes in an endless spin and never identifies the needed driver. Should I delete the support framework and reload it or use something else.

Hi:
Based on the product number for your model, this is the only graphics driver available.
AMD High-Definition (HD) Graphics Driver
Version:8.900.7.1000Oct 20, 2012
8.900.7.1000
173.5 MB
Oct 20, 2012
File name: sp54992.exe
If you want to see if the latest graphics driver directly from AMD works you can give this one a try...
http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064

Need some technical specs for practice

Can any body send me some sample technical specs for practice. My email id is [email protected] Thanks in advance
bindazme

Hi,
I m not sending you any sample for tech specs but you will
find the tips as below:
1.In 1st page you may require to give heading and company logo also at the RHS.
2.Give title of the document , SAP Module Name, Specification Type (Giv ein a tabular format)
3.Revision History in Tabluar Format including Author , Description , Date , Version ( Version management very imp try to maintain it)
4.Requirement Description : Enter in detail wat is u r reqmt.
5.U may add Process flow diagram using visio etc.
6.Outstanding issues
7.Prerequisites
8.Input Parameter Details
9.Processign logic Details
10.Out Put Details (if Report Output Format)
11.The few unit testing scripts also u can include
12.Proper file name , in header & Footer
13. Always try to keep track changes on for version management. If u need to create new version try to accept previous version then keep track for curren tchanges.
14. Maintain index & Page no in table content .
Kindly Reward points if contents are useful....
Rewards,
Mandeep.

I Need Some Prep Advise For Installing/Using a Wacom Bamboo-CS4

Similar Messages

Maybe you are looking for