I need tables for prepare the master data templates for PM

Dear Experts,
can we prepare the master data templates by using the tables? if its possible means how we can prepare and what we have to considered ? is it right way or wrong?
please suggest me to prepare the masterdata templates for ever use. if any small corrections we can correct it at usage time.
please help me
thanks a lot in advance

Dear Jalu,
Master data Templates have to be prepared based on Client's requirement after understanding their Business.
For example, in Equipment master there are ~ 60 to 70 feilds, no client requires all of them. Some are inherited.
After client requirement freezing, record LSMW and based on that prepare the Template.
Regards,
MLN Prasad

Similar Messages

  • Master Data Templates for RDS

    Hello,
    Can anyone help me find the link from where i can download the Master Data template used for RDS in SAP ERP.
    the link was shown to us last month but it's gone.
    Please help.
    Thank you.
    Regards,
    Ber

    Hi Vikrant,
    I need these templates urgently. plz mail me at [email protected]
    Points will be rewaeded

  • Master data templates for Talent management

    Dear All,
    Please let me know  if someone can provide me with templates for PD.
    We are in the midst of an implementation and the employee nos are huge.
    It would take a long time for the client to complete the talent architecture and hence do not want to miss any column when I provide them with the templates.
    Templates are required for,
    1. Qualification catalog, Qualification Upload
    2. For creating Requirement profile at job and position level.
    3. For creating Skill profile at employee level and grading them
    4.Career and Development plans.
    Anything else if I have missed....
    Thanks for your help.
    Regards,
    Rijuraj

    hi
    I think thee is no seprate master data template...
    WM will use MM and SD ( customer master) master datas.
    regards
    4777

  • For preparing the filenames and paths for the oracle database files..

    Hi,
    I am preparing the filenames and paths for the oracle database files.....but I am not able to complete this one...Will you Please help for filling this one.
    Controlfile ---- > select name from v$controlfile;
    Redologfile -- > select member from v$logfile;
    Datafile --------- > select tablespace_name,file_name from dba_data_files order by 1;
    Tempfile --------> select tablespace_name,file_name from dba_temp_files;
    Spfile -----------> show parameter spfile
    Pfile --------------->
    Passwordfile ---->
    tnsnames.ora -->
    listener.ora------>
    sqlnet.ora ------>
    oratab ------------->
    Thanks
    Shiju

    orashiju wrote:
    Hi,
    I am preparing the filenames and paths for the oracle database files.....but I am not able to complete this one...Will you Please help for filling this one.
    Controlfile ---- > select name from v$controlfile;
    Redologfile -- > select member from v$logfile;
    Datafile --------- > select tablespace_name,file_name from dba_data_files order by 1;
    Tempfile --------> select tablespace_name,file_name from dba_temp_files;
    Spfile -----------> show parameter spfile
    Pfile --------------->spfile and pfile are located under $ORACLE_HOME/dbs/
    Passwordfile ----> passwordfile is located under $ORACLE_HOME/dbs
    tnsnames.ora -->
    listener.ora------>
    sqlnet.ora ------>all above files are under $ORACLE_HOME/network/admin
    oratab ------------->depends on operating system. Usualy under /etc/oratab

  • Error while activating the Master Data InfoSource for attributes

    Hai
    Im trying to load the attributes for master data characteristics .
    I created the InfoSource and when im trying to activate it .
      Then it gives the following error like below
    Diagnosis
    An error occurred in the program generation:
    Program / Template:   RSTMPL80
    Error code / Action: 6
    Row:        505
    Message:    The data object "P_S_COMM" has no component called
    Procedure
    If the problem occurred during the data load or transport, activate the transfer rule.
    If the problem persists, search in the SAP note system under 'RSAR 245'
    So please tell the what is the error and how to resolve this issue.
    And pls give the error 'RSAR 245' message from SAP note system.
    I will assign the points
    bye
    rizwan

    hi Rizwan,
    check if helps Note 602318 - RSAR 245 error analysis with RSTMPL80
    Summary
    Symptom
    The process of generating transfer rules or loading data terminates with error RSAR 245.
    The long text for error message RSAR 245 indicates the cause of the generation error.
    1. Error code: 6
    a) Message: The P_S_COMM data object has no component
    This is very likely to be due to an 'obsolete' communication structure.
    b) Message: <table name> is already declared.
    c) Other messages
    2. Error code: 7
    Other terms
    RSAR245, RSAR 245, activate transfer structure, monitor, request
    Solution
    1. Error code: 6
    a) 'Obsolete' communication structure:
                Due to an optimization algorithm, pressing the 'Generating button' does not have any affect on the communication structure. Therefore, use the following workaround:
    Select 'Communication structure' -> 'Change'.
    Add any InfoObject (for example, '0MATERIAL') to the communication structure -> 'ENTER'.
    Communication structure ---> 'Save'
    Selet the InfoObject you inserted and delete it.
    Communication structure ---> 'Save'
    Communication structure -> 'Generate'.
    a) Message: <table name> is already declared. Check whether the local part of your routines contains TABLE statements. TABLE statements always have global validity and should therefore be in the global part of the routine.
    b) If the error occurs when data is being loaded, the transfer rule should be generated using RSA1.
    In many cases, generating transfer rules using RSA1 results in a detailed error message.
    2. Error code:
               Program to be generated is locked by parallel process.
    This error can sporadically occur if parallel processes simultaneously try to generate the same program.
    Unfortunately, you cannot completely prevent the error from occurring since these types of lock situations can still crop up during data loading in parallel processes. We are currently working on improving system stability relating to lock situations during the load task.
    Reloading usually works without any problems.

  • How to restrict the Master data access for HR reports .???

    Dear SAP-HR Experts .
    I am facing a problem regarding HR reports which is appearing from HR Master Data .
    we want to restrict that a employee whose payroll area is AB (say) can only able to access the out of reoprt for payroll area AB only He/She not allowed to access the data for anyother payroll area .
    What help is required from Basis side , regarding Role / Profile etc .?
    How do we restrict this thing .
    PLease help me out .
    Kind regards : rajneesh
    Edited by: rajneesh mittal on Jul 31, 2008 1:14 PM

    Hi rajneesh,
    In the IT0001 there is a field called organizational key.
    If you're not using it for any other purpose, make it filled with "payroll area" value through customization.
    Then through PFCG -> Change authorizations, you can limit the access authorizations of roles based on payroll area (using P_ORGIN Authorization object).
    If you have further questions pls feel free to ask.
    Regards,
    Dilek

  • The time dependency for reading the master data (define key date) of attribute '0IND_SEC' of InfoObject '0UCINSTALLA' has not been defined.

    Hi Gurus,
    We have recently upgraded our BI support pack from BW 701 SP 7 to BW 701 SP15. We are facing some transformation activation issue after the upgrade.
    Can some one help me with this.
    Thanks,
    Shak.

    Hi,
    Time independent.
    Some more details,
    Info Objects are active and I have tried  RSDG_TRFN_ACTIVATE program to activate. Checked RSRV for both the info objects.
    Thanks,
    Shak.

  • Master data datasource for the point of delivery and installation.

    Hi,
    Can any one help me with the Master data datasource for the point of delivery and installation.
    Currently i am using ouc_instfacts for installation facts.
    With Thanks& Regards,
    Shakthi.

    Hi Shakti,
    I guess you are asking for assignment of installation to POD (table euiinstln)?
    Then you should check 0UC_PODINST_ATTR.
    Best regards
    Harald

  • 'Overlapping Time Intervals' error while loading the Master Data

    Guys,
              Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
    This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
    If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
    Below is an example of how the data looks like.
    FRSITM         Valid To                  Valid From                 Edition
    1001             12/31/9999             04/01/2010                2010.1.1
    1001             01/31/2010             03/01/2010                2010.1.2
    1001             12/31/9999             02/01/2010                2010.1.3
    In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
    And also I see that the Edition is not the Key Field.
    Any suggestions or ideas? Appreciate your help.
    Thanks.

    FRSITM Valid To Valid From Edition
    1001 12/31/9999 04/01/2010 2010.1.1
    1001 01/31/2010 03/01/2010 2010.1.2
    1001 12/31/9999 02/01/2010 2010.1.3
    1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
    2. if system comes across two same records it picks up the latest one.
    3. It shall merge the timelines is overlap is found.
    4. I hope Edition is time dependent attribute
    I believe infoobjet key is FRSITM Valid To.
    In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
    have a look at Q table and you shall be able to figure out for your self.
    Hope it helps
    Vikash

  • Schedulinng the Master Data- MDMGX

    Hi  All,
    Can you help me on regarding this :
    We have scenario where ECC(HCM) sending the master and reference data of PersonnelAdministration(PA)/Organization Management(OM)  to MDM  and our design confirmed that usign PFAL transaction for send the master data from HCM where MDM mster tables interested and usign MDMGX transaction for send reference data where MDM flat tables interested. Both are initial loads and as follows delta loads.
    This process will through using SAP PI as middleware and we identified IDOC is  HRMD_A07 for fetch the data from ECC , so my questions are :
    1. what is the related report can call to trigger this HRMD_A07 using PFAL and how do i schedule this IDOC for initial loads as well as delta loads(when changes occures).
    2. We required some custom zfields for adding this IDOC , how do  I handle this (need steps)?
    3. Did MDMGX/PFAL can capable to handle initial loads as well as delta loads?
    4. can you guide me whole process for development perceptive.
    5. I  am new for this kind of work , if you have standard links and documents would help me lot..
    hoping that I may reach you with related questions.. pls. help me development point of view..
    Thanks for your time ..will appreciate with regards..
    - Shankar

    Hi Shankar
    Sorry, your question not for MDM
    More about XP/PI from:
    Process Integration (PI) & SOA Middleware
    MDM can syndicate only new(or updated) records from MDM repository to special directory(which confirgured as MDM outbond port) and  XI/PI can get that syndicated file and send it to destination system.
    Regards
    Kanstantsin
    Edited by: Kanstantsin Chernichenka on Oct 31, 2009 9:05 AM

  • Deleting the Master Data is not possible

    hai
    Im loaded the Master Data .
    I want to delete the Master Data. So how can i delete ??
    Im trying to delete Master Data by context menu of the Master InfoObject .But im unable to delete the master data .
    I heard that it is big issue.
    So what can i do for deleting the master data.
    pls tell me
    rizwan

    hai all
    Thanks for quick reply .
    I deleted the data from InfoCube and ODS .
    Im trying to delete the master data attribute data by context menu of master infoobject . But it is says that "Not all master data can be deleted".
    I looked at the help from that message .It says that i need to go SLG1 transaction and then delete like that
    But i dont have authorization for that transaction(SLG1).
    So plese tell me what i ahve to do for deleting the master data .
    txz
    rizwan

  • How to find all the Master data extract structures and Extractors

    I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
    Question: How to get a complete list of all Master data extract structures and corresponding extractors?
    Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
    How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
    Regards
    Sasanka

    Hi,
    try the table ROOSOURCE and search the data source with string in astrick attr  for master data and for text with text
    This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
    Thanks
    Ajeet

  • Master Data source for sales district or Region in CRM

    Dear All,
    Please let me know the Master Data source for sales district or Region in CRM.
    Thanks
    Regards,
    Sai

    Hi Tiest,
    Thanx for responding.
    U r right, our clint is upgrading from 4.6 to ECC.
    So as per the clients requirements, we are maintaining all the configs for Services in CRM.
    Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
    What I am looking os some standard upload program.
    LSMW recording does not work.
    This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
    IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
    But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
    Till now, I am only able to define just one field name and a field value.
    I want this to word for mutliple entries.
    Hope u get my point.
    Thanx

  • How To Transfer the master data from R/3 to APO System

    hi this is mohamed .i m new to APO..
    can any one guide me the configuration for transferring the master datas to APO system.i m using scm 4.0 version..
    Thanks in advance
    Regards
    Mohamed.

    Welcome to SDN.
    refer this link
    creating integration model
    Give ur mail id i will send the document which i have.
    With regards.
    Maya.

  • Maintain the Master data

    How to maintain the Master data at Client –Server architecture?
    Thanks

    1)You get to the master data maintenance via
    InfoObject Tree - InfoObject - Context Menu (right mouse button) - Maintain Master Data.
    or
    or in the InfoObject maintenance by choosing Maintain Master Data
    2)A selection screen appears for restricting the master data. You may want to edit here.
    Taking into account the options from F4 Help, select the relevant data.
    You get to the list header for the selection. The list header is also displayed if no hits have been found for your selection, so that you can enter new master records for particular criteria.
    Make your changes with the help of the relevant maintenance function.
    3)Creating new master records
    Choose Create to add new master records. New records are tagged onto the end of the list.
    Changing single records
    4)A double-click on a data record takes you to the individual maintenance. Make the relevant changes in the following Change dialog box.
    5)Choose Save.

Maybe you are looking for