I Need the correct resolution for images imported to iDVD

Maybe some kind soul can help me out. I took some photos with my digital camera. Made slides of them in Powerpoint, imorted to iPhoto then to iDVD slideshow and all was fine. No cutoffs of top or bottom and no black bars. Now I've tried for another project to take these sides from Powerpoint, import to iPhoto, set up a slide show with timings and sound. then export to iDVD, but it cuts the tops and bottoms of the pictures. I've read everthing I can find on proper resolution and ratio. I constrained them to the 4:3 inside iPhoto and still cutoffs of top and bottom. I put them into Photoshop and constrained to 640x480 as suggested and then after import to iDVD there are black bars on top and sides when it plays on a tv/dvd player but looks okay on the computer moniter. I need the slides to be full on the tv safe area and show full on a tv with no black bars or cutoffs. I've gone nuts trying to figure this out. Any help would be GREATLY appreciated. Thanks in advance.
Steve

I constrained them to
the 4:3 inside iPhoto and still cutoffs of top and
bottom. I put them into Photoshop and constrained to
640x480 as suggested and then after import to iDVD
there are black bars on top and sides when it plays
on a tv/dvd player but looks okay on the computer
moniter.
Steve,
This sounds to be the REVERSE of a TV Safe Area problem. The usual problem is the images show correctly on the computer monitor but are missing edge information when played to a TV set.
640x480 works with the iApps through iLife '04. The iLife '05 apps expect NTSC images to be 720x534 pixels - using a 640x480 image will result in black bands on either side of the image. PAL is 768x576. Note that these are listed as standard size images when creating a new image in Photoshop.
The only way to get a slideshow to show everything on both a computer monitor and a TV set is to include the slideshow twice - once with no edge masking for computer use and once with the edges padded with black so everything will be shown on a TV set.
Edit: I just reread your original post and you may be seeing effects caused by the Ken Burns effect not being turned off.

Similar Messages

  • I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr

    I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr.
    The receiver that came with my notebook is a black model one (see picture below), with the following information in its bottom label:
    RC1762302/00
    3139 228 50021
    HP SPS: 435743-001
    HP: HSTNN-PRO7
    RC6 ir
    CP06 60808 A 146218 REV. B
    I never managed to make it work, from the very beginning. I know it is working, because I replaced the battery for a brand new one and it shows a blinking IR LED when I press any button and point it to a digital camera.
    Searching for "ENE CIR receiver driver" is useless 'cause I received more than one hundred answers - I tried four of them but none worked so far. 
    So, instead of trying the whole bunch, I am crying for help -  could someone please tell me which driver is the correct one for this remote model?
    Thanks in advance and regards,
    Mike  
    P.S.: I am using Windows 7 Ultimate 64-bit and Ubuntu 12.04 in this notebook 

    http://ftp.hp.com/pub/softpaq/sp46501-47000/sp4674​1.exe
    File name:
    sp46741.exe [1/1, 1.04M]
    System requirements:
    No additional prerequisites
    Released:
    2009-12-31
    Version:
    2.7.4.0 A
    Compatibility:
    Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
    Fix/Enhancement:
    Original Software/Drivers

  • How can I get the best resolution for images in the pdf?

    When I magnifies images on the iPad PDF mode, the image loses a lot of quality.
    How I can improve them to be viewed without pixel?

    stupid problem. I don't know why Adobe dosent fix it.

  • 27" iMac doesn't have correct resolution for LG monitor

    Hi guys,
    Hoping to find some answers here - I called Apple Care but they weren't very helpful and told me to call LG..but I really doubt the issue has anything to do with LG.
    I have a 22" LG monitor that I used as a second monitor for my 24" imac. It worked great, no problems. I recently got a 27" imac and the display options don't give me the correct resolution for the second monitor (needs 1900x1080). So I can only use it at a totally blown up, out of proportion res. If I try to set it at any of the higher resolution options the monitor goes black and says "out of range".
    To me, this is a problem with the iMac, not the monitor, as it doesn't seem to support the proper resolution. Am I screwed and just can't use this monitor with the new iMac?

    ichbinesderelch wrote:have you tried using xrandr? xrandr -q shows available outputs, xrandr --output outputadapter(like VGA) --mode 1280x1024, as far as i can see, virtual monitor is set high enough that this should kinda work!
    Yes, I tried xrandr:
    $ xrandr --newmode "1280x1024" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
    $ xrandr --addmode VGA 1280x1024
    $ xrandr --output VGA --mode 1280x1024
    $ xrandr --output VGA --right-of LVDS
    At first this didn't work at all, so I tried to mess with screen resolution applet and got output on the second monitor, but not at the desired resolution.
    I tried running these commands again and got output on the second monitor, but at the wrong resolution. The strange part is that the resolution I want is listed by xrandr:
    $ xrandr -q
    Screen 0: minimum 320 x 200, current 2304 x 800, maximum 2560 x 2048
    VGA connected 1024x768+1280+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1280x800@60 60.0 +
    1360x768 59.8
    1024x768 60.0*
    800x600 60.3 56.2
    640x480 59.9
    1280x1024 60.0
    LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1280x800 60.0*+
    1024x768 85.0 75.0 70.1 60.0
    832x624 74.6
    800x600 85.1 72.2 75.0 60.3 56.2
    640x480 85.0 72.8 75.0 59.9
    720x400 85.0
    640x400 85.1
    640x350 85.1
    TV disconnected (normal left inverted right x axis y axis)

  • What is the best product, for image gallery usage.. to crop, colour correct, and re-touch etc.

    what is the best product, for image gallery usage.. to crop, colour correct, and re-touch etc.

    Hi gardenzio2,
    You can try using Adobe Photoshop

  • What is the maximum resolution for an external monitor for a 13" BMP

    I have a new MBP 13 and a new Samsung LED 23" monitor that is spec'd at 1920x1080 resolution. However the maximum resolution I can get (using Display) for the external monitor is 1600x900 (or 1600x1200 stretched). What could be causing this limitation?

    Are you guys able to resolve the issue with the Samsung HDTV LCD monitor? I just bought the Samsung B2230HD but having some image issue. I am connecting to the LCD from my macbook pro using Mini Display Port -> DVI -> HDMI but the image on the LCD is very grainy where the text is not sharp at all. The mac is able to detect the correct resolution of 1920x1080 though

  • What is the effective resolution for artwork in Keynote? I have a gigantic file I wnat to make smaller, and there are some problematical photos I want to downsize.

    What is the effective resolution for imported artwork/photos? I have to downsize a huge file.

    Change the pixel size of the images in a graphics application to match the pixel size of the presentation set in
    Inspector > Document > Slide Size  then bring them into Keynote.
    I use Stunt Software's Downsize specifically for this as it can batch process hundreds of files extremely fast:     Downsize

  • Create a smart folder for images imported "TODAY"

    Is it possible to create a smart folder for images imported today? The only close option I have been able to find is by selecting the "import session" option, but that forces me to select from a series of sessions that have already been imported. I'd like to be able to have a single folder, day after day of what I imported today almost like the iPhoto "last roll" folder. Possible?

    There is a Filter Rule "Import Session" but as implemented (as you discovered) it isn't easy to use.
    What I do is:
    . add "Import Session" to the "List -- Expanded View" Metadata Overlay
    . click "Photos"
    . change to List
    . change to Expanded Overlay if needed
    . click the column header "Import Session" (note that this adds "Import Session" to the sort drop-down)
    . change back to Grid view as needed
    I use this to confirm imports, and to find any that I mis-placed.
    HTH.
    Message was edited by: Kirby Krieger

  • Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

    Hi,
      I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder.  "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
    The files we're shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with still the same error.
    I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash.  I tried this twice....
        Thanks in Advance

    Hi Hunt,
           Here is the skinny.  A window base PC.  footage shot with HD sony HD cameras,  Project imported to Premiere CS3.  Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality.  Imported them to Adobe Encore CS3.  After about ten files or so.  I got the error message.  Did all the basic trouble shoot like restarting the computer, got latest patch.  Even build a new test project with the same problem.
        Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded.  So it will be a double compression and I dont want that.  So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
       what do you think ????
       Peter

  • Macbook doesn't have the right resolution for external monitor.

    I have a Macbook Pro runing OS X 10.7.5 and have a HP w1907 LCD monitor. When I have the Macbook open, I can get the proper resoulution of 1440x900 on the LCD while the monitors are Mirrored. But when the macbook is closed, the options for the LCd monitor are replaced by VGA display. The VGA Display options do not have the 1440x900 resolution option.
    What do I have to do to get my monitor's native resolution back while keeping the macbook closed.

    Aha - got luck: In Preferences/DIsplays click in the window and press 'Option' - the 'Gather Windows' button changes to 'Detect Displays' and when clicked, discoverd the correct resolution.
    That does it.

  • The correct patch for JDeveloper 9i

    The correct patch for JDeveloper 9i
    I do not identify the corect version of JDeveloper patch that is needed for my OA Framework . I identified my OA framework version , 11.5.10.5RUP (on my About page) . I have read note 416708.1 (How to find the corect version of JDeveloper to use with eBusiness Suite 11i or Release 12.x) but I do not know what version of JDevelper 9i to use (I can not find the right one that have my OA Framework) . Someone may want to help me?
    Many thanks,
    Aurel

    According to your output you have ATG RUP5 installed on your 11i system. Per MOS Doc 787209.1 (How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12), you will need patch 6012619 of JDeveloper.
    HTH
    Srini

  • What is the ideal resolution for photos when creating a photo book in iphoto?

    Can you tell me what is the ideal resolution for photos I use to create a photo book from my iphoto library? 

    The DPI depends on the size of the image to be printed by the image file.  A 639 x 960 image could print a 3.5  x  5 photo at 180 DPI.  This website explains it further: The Myth of DPI.  
    So use the smaller photos only in the smaller frames on multiple photo layouts for best results.
    OT

  • Update my app. What is the correct procedure for updating an app/folio?

    I designed a folio in Indesign CS6 and created an app of the folio in adobe dps and succesfully uploaded it to the app store. Now I want to update my app. What is the correct procedure for updating an app/folio?

    no, just update your content and recreate the Single Edition App. Your certificate should still be valid so there is not need to recreate these.
    ... your App ID absolutely need to be the exact same one you used for the first version if you want to make sure this is an update.

  • Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

    What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

    Buying more hard drive space is a very valid option, here.  Editing takes up lots of room, you should never discount the idea of adding more when you need it.
    Another possibility is exporting to MXF OP1a using the AVC-I codec.  It's not lossless, but it is Master quality.  Plus the file size is a LOT smaller, so it may suit your needs.

  • What are the correct settings for the Canon 5D mark II in FCP 7 ?

    I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
    (latest firmware installed)
    Please, can someone provide all the correct settings for me?
    And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
    Please help - I don't want to start editing until I have the right settings for this footage.
    Thanks
    Jim

    Welcome to the Boards
    Not sure what you mean with the following, looks like a word dropped?
    I have ro use EOS utility every time I want to get anything off of the camera...
    Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
    Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
    It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
    Take a look at the search over there -> to look for the Canon 5D threads for some more info.
    What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
    I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.)

Maybe you are looking for

  • Error message: Network connection timed out

    Go to download iOS5 on to my iPhone 4 and just as it was about to finish downloading, I get the error message. It's come up many times before when trying to update the phone, but I have just been ignoring it and not bothered with an update. Using lat

  • Exchange Provisioning - Class Not Found Error

    Hi, During the Exchange Provisioning, I am getting the following error for the "Create Mailbox" Task. I enabled XELLERATE.REMOTEMANAGER=DEBUG in the log.properties. After that, I see some errors during the provisioning. 11/04/05 02:09:35 Running EXEC

  • Financial Reporting - Problems with Point of View

    Hi everbody, My problem is: I have a report that use a Essbase Database Connection. When I made the report, i didn't have any problems, but now when I access the FR studio and open the report i receive a message box "Unkown Error" and the POV is set

  • IPM help needed

    Hi, We are planning to go for IPM implementation and would like to have suggestions / answers asap. I would appreciate if someone can come up with the clarification. - Can we buy license for IPM as a standalone pacakge?OR we have to go for CRM too, s

  • Safari stopped loading images suddenly

    No more images loading with Safari 3.0.4 it was working fine until now . Firefox work's fine , the other computer Imac connected on the same internet provider has Safari working ok . Strange but only the Apple.com open's with images ?? Please help