I need the definitions for below material types
Hi all,
Can anyone tell me the diefinition of the below material types
1) WM materials
2) Consumable Material
3) Stock Material
thanks in advance,
Prashnath.
Hi Prashant,
Stock material :
A stock material is a material that is kept in stock. Such materials are placed in storage following a goods receipt . When goods are received by or issued from stores or the warehouse, the stock on hand is increased or reduced by the amount of the quantity received or issued.
Consumable material :
When you procure for direct consumption, you specify the consumption purpose by entering an account assignment (for example, a cost center) . On goods receipt, the material or service counts as having been consumed.
If a material is procured for direct consumption, the consumption accounts in Financial Accounting are posted when the goods receipt is entered . The total quantity and value of existing stocks of the material are not affected.
Warehouse material :
Purpose
The SAP Warehouse Management system (WMS) provides flexible, automated support in processing all goods movements and in managing stocks in your warehouse complex. The system supports scheduled and efficient processing of all logistics processes within your warehouse.
If you manage your warehouse stocks with SAP Inventory Management (MM-IM), you manage the quantities and values of stocks in several storage locations.
In comparison, the WMS allows you to map your entire warehouse complex in detail to storage bin level. Not only do you gain an overview of the entire quantity of a material in the warehouse; you can also always determine exactly where a certain material currently is in your warehouse complex. With the WMS you can optimize the use of all of your storage bins and warehouse movements, and store material stocks from several plants together in warehouses with random storage.
Hope thsi will give some Idea to you.
Vivek
Similar Messages
-
Hide views in MM01 for all material type in one time
Hi,
I have a requirement to hide the views for all material type at at time.
i tried with OMS2 , it is allowing me to do for one matrial type.
could any one tell me how to hide the views for all material type in one short.
Thanks in adv..Hi Rakesh,
Up to my knowledge it is not possible to do view setting for all material type in one shot simply because it is material type dependent.
If trying to change fields in material master then use OMS9. This also material type linked to field reference group. And we can change the setting of field selection group in one shot. This will affect the material types linked to it.
Hope it helps
sBk -
Valuation type need to maintain for Subcontracting material FG
Hi,
i have a scenario like plant A is subcontracting SFG to Plant B and receiving FG to Plant A from Plant B.
i have maintain this as V valuation type.
when i am doing billing in Plant A for this product i am getting error like no cost estimate found for product.
As it is "V" and it has BOM and it has price in it.
And i have maintain in KEPC setting aganist this material type against this plant.
if i remove this setting probelm can be solved
but this plant has got some other FG products which are produced in house so we do costing run for it.
is there any solution for this material type that can allow billing with "V" price also with out making changes in KEPC.
thanks
kareemHI Ajay anna,
thanks for ur reply
do i need to assign same costing key for the product in KE4H .
or do i need to create new costing for it.
please can you tell me what i need to select if i need to create new costing key for those they dont have cost estimate.
Like Period indicator,
costing date.
waiting for ur reply anna.
thanks
kareem -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
Uploading data in MM01 for different material types
Hi,
I have a doubt regarding uploading the data in MM01 for different material types.
Generally in MM01, we have different views for different material types. The number of views will vary depending upon the material type that we select.
I have a scenario, where in to upload the data, I have a flat file that consists of data for different message types. So, how to upload the data in such case.
Can anyone help me on the same by providing explanation or sample code...? What would be the possible ways to upload data in such scenario.
That would be of great help.
Thanks & Regards,
Pradeep.See the below code and use FM SELECTION_VIEWS_FIND..
REPORT zjpmuim306 NO STANDARD PAGE HEADING LINE-SIZE 250 MESSAGE-ID
zjpm001.
*& I N B O U N D V I A A B A P : Batch input Session method *
*& Development ID: IM_DD_306_LJP *
*& Report : ZJPMUIM306 *
*& The Purpose of the Object is to interface Create Input Record *
*& for SAP Migration from the Material master of BPCS All the *
*& information received at BPCS is collected into a single record. *
*& By using session method upload data from file ,one item is
*& created for one record *
*& Change Log: *
*& Init Who Date Text *
*& MALIKDH1 Seshu Reddy 26-07-2003 Initial Version *
Constants *
CONSTANTS:c_vkorg(4) type c value 'JP20', " Sales Organization
c_vtweg(2) type c value 'TR' , " Distribution Channel
c_werks(4) Type c value 'JP01' , " Plant
c_viewlist(15) VALUE 'KDEALBSZXVPCFQG'," View list
c_scm_view TYPE msichtausw-dytxt VALUE 'SCM View',
c_sd_view TYPE msichtausw-dytxt VALUE 'SD View',
c_seq_code(2) VALUE 'Z1', " Sequential Code
c_keep(1) TYPE c VALUE 'X', " Keep
c_group LIKE apqi-groupid VALUE 'IM306', " Session Name
c_tcode LIKE tstc-tcode VALUE 'MM02', " Transaction Code
c_blank(1) VALUE ' ', " Blank
c_intls(1) VALUE 'N'. " Logistic Status
Variables *
DATA: g_flag1(1), " Variable to hold
g_flag(1), " Variable to hold
g_file LIKE rlgrap-filename VALUE
'C:\Documents and Settings\seshur\Desktop\HCLT123.CSV'. " File name
Internal tables/ Work area *
Internal Table for Delimter
DATA : BEGIN OF t_delim OCCURS 0,
text(1000),
END OF t_delim.
Internal table for BDC processing
DATA : t_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
Internal table for holding the data which has to be uploaded.
DATA: BEGIN OF t_bpcs OCCURS 0,
matnr(15) TYPE c, " material no
dosage(40) TYPE c, " Dosage form(Local)
appearance(40) TYPE c, " Appearance
idcode(6) TYPE c, " Identification Code
prostformno(10) TYPE c, "SOP
weitab(7) TYPE c, " Weight/tablet
uom1(2) TYPE c, " UOM of Carton
uom2(2) TYPE c, " UOM of Case
carsize(14) TYPE c, " Carton size
cassize(14) TYPE c, " Case size
rupqty(11) TYPE c, " Round up
abvname(3) TYPE c, " Product short name
END OF t_bpcs.
*Internal table for t_bpcs
DATA: BEGIN OF t_mdata OCCURS 0,
matnr LIKE marc-matnr, " Material number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, " Dosage form(Local)
zzjp_aprn LIKE marc-zzjp_aprn, " Appearance
zzjp_con_id LIKE marc-zzjp_con_id," Identification Code
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,"SOP
zzjp_wei_tab(10) type c , " Weight/tablet
zzjp_bio LIKE marc-zzjp_bio,"Biologics Indicator
zzjp_itf LIKE marc-zzjp_itf, " ITF code
zzjp_car(2) type c, " UOM of Carton
zzjp_cas(2) type c, " UOM of Case
zzjp_car_size(11) type c," Carton size
zzjp_cas_size(11) type c, " Case size
zzjp_rupqty(11) type c, " Round up
zzjp_init_ls LIKE marc-zzjp_init_ls, " Logistic Status
zzjp_re1 LIKE marc-zzjp_re1, "Document type(Local)
zzjp_re2 LIKE marc-zzjp_re2, "Report type
zzjp_re3 LIKE marc-zzjp_re3, "Shipping report type
zzjp_pro_id LIKE mvke-zzjp_pro_id," Product output sequence
zzjp_bu_id LIKE mvke-zzjp_bu_id, " Business unit indicator
zzjp_abv_name LIKE mvke-zzjp_abv_name," Product short name
zzjp_abv_id1 LIKE mvke-zzjp_abv_id1," Product short name output
zzjp_abv_id2 LIKE mvke-zzjp_abv_id2," Product short name internal
zzjp_spl_id LIKE mvke-zzjp_spl_id, " Sample internal order
END OF t_mdata.
Internal table for Mara Table
DATA: BEGIN OF t_mara OCCURS 0,
matnr LIKE mara-matnr, " material Number
vpsta LIKE mara-vpsta, " Maintenance status of complete material
pstat like mara-pstat, " Maintenance status
END OF t_mara.
Internal table for Material Master View Selection Screens
DATA: BEGIN OF t_bildtab OCCURS 0.
INCLUDE STRUCTURE mbildtab.
DATA: END OF t_bildtab.
internal table for T_bildtab
DATA: t_bildtab_dup LIKE t_bildtab OCCURS 0 WITH HEADER LINE.
*Work area for T_bildtab internal table(Views Selection)
DATA: BEGIN OF w_data,
flag1 type c,
anzd70 TYPE i,
field1(20) type c,
field2(20) type c,
field3(20) type c,
field4(20) type c,
count(2) TYPE c,
END OF w_data.
Main Processing *
START-OF-SELECTION.
Store data from file into internal table
PERFORM f_uplaod_data.
Transfer the uploaded data into t_mdata internal Table
PERFORM f_process_data.
Selecting The views based on Material number
PERFORM f_view_list.
Open a BDC Session
PERFORM f_bdc_open.
*Selecting the fields from mara table
SELECT matnr
vpsta
pstat
FROM mara
INTO TABLE t_mara
FOR ALL ENTRIES IN t_mdata
WHERE matnr = t_mdata-matnr.
SORT t_mara BY matnr.
SORT t_mdata BY matnr.
Transfer the uploaded data into BDCDATA structure
PERFORM f_process_bdc.
Close The BDC Session
PERFORM f_close_group.
*& Form F_VIEW_LIST *
Routine to used for Calling the function module *
Selection_views_find *
FORM f_view_list.
CALL FUNCTION 'SELECTION_VIEWS_FIND'
EXPORTING
bildsequenz = c_seq_code
pflegestatus = c_viewlist
TABLES
bildtab = t_bildtab
EXCEPTIONS
call_wrong = 1
empty_selection = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_VIEW_LIST
*& Form f612_view_sort *
Routine to used for Selecting The views based on Material Number *
FORM f612_view_sort.
t_bildtab_dup[] = t_bildtab[].
Reading the Internal table t_mara
READ TABLE t_mara WITH KEY matnr = t_mdata-matnr.
TRANSLATE t_mara-pstat USING ' $'.
CLEAR: w_data-flag1, w_data-anzd70.
LOOP AT t_bildtab_dup.
IF t_bildtab_dup-pstat CA t_mara-pstat.
w_data-anzd70 = w_data-anzd70 + 1.
IF t_bildtab_dup-kzanz IS INITIAL.
t_bildtab_dup-kzanz = 'X'.
w_data-flag1 = 'X'.
MODIFY t_bildtab_dup.
ENDIF.
ELSE.
IF NOT t_bildtab_dup-kzanz IS INITIAL.
CLEAR t_bildtab_dup-kzanz.
w_data-flag1 = 'X'.
MODIFY t_bildtab_dup.
ENDIF.
ENDIF.
ENDLOOP.
TRANSLATE t_mara-pstat USING '$ '.
IF NOT w_data-flag1 IS INITIAL.
SORT t_bildtab_dup BY kzanz DESCENDING idxbd ASCENDING.
ENDIF.
*Reading The internal table for T_bildtab_dup
READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
IF t_bildtab_dup-kzanz = 'X'.
WRITE sy-tabix TO w_data-count.
w_data-count = w_data-count + 2.
IF w_data-anzd70 > 18.
w_data-count = w_data-count - 18.
ENDIF.
CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field1.
CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field2.
ENDIF.
READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
IF t_bildtab_dup-kzanz = 'X'.
WRITE sy-tabix TO w_data-count.
IF w_data-anzd70 > 18.
w_data-count = w_data-count + 2.
w_data-count = w_data-count - 18.
ENDIF.
CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field3.
CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field4.
ENDIF.
ENDFORM. " f612_view_sort
*& Form f_uplaod_data *
Routine to used for Uploading the data from file to Internal table *
FORM f_uplaod_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = g_file
filetype = 'DAT'
TABLES
data_tab = t_delim
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF t_bpcs IS INITIAL.
LOOP AT t_delim.
SPLIT t_delim-text AT ',' INTO t_bpcs-matnr
t_bpcs-dosage
t_bpcs-appearance
t_bpcs-idcode
t_bpcs-prostformno
t_bpcs-weitab
t_bpcs-uom1
t_bpcs-uom2
t_bpcs-carsize
t_bpcs-cassize
t_bpcs-rupqty
t_bpcs-abvname.
APPEND t_bpcs.
ENDLOOP.
ENDIF.
ENDFORM. " f_uplaod_data
*& Form F_BDC_OPEN
Routine to create BDC Session to be processed
FORM f_bdc_open.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = c_group
keep = c_keep
user = sy-uname
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE S000 WITH 'Batch input session is created successfully'(T02).
ENDIF.
ENDFORM. " F_BDC_OPEN
*& Form F_PROCESS_BDC
Processing of BDCDATA Structure
FORM f_process_bdc.
LOOP AT t_mdata.
PERFORM f612_view_sort.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0060'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'RMMG1-MATNR'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=AUSW'.
PERFORM f_bdc_field USING 'RMMG1-MATNR'
t_mdata-matnr.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
IF w_data-anzd70 > 18.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
ENDIF.
reading the t_bildtab internal table
READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
IF t_bildtab_dup-kzanz = 'X'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
w_data-field1.
PERFORM f_bdc_field USING w_data-field2 'X'.
g_flag = 'X'.
ENDIF.
reading the t_bildtab internal table
READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
IF sy-subrc EQ 0.
g_flag = 'X'.
ENDIF.
IF t_bildtab_dup-kzanz = 'X'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
w_data-field3.
PERFORM f_bdc_field USING w_data-field4 'X'.
g_flag1 = 'X'.
ENDIF.
IF g_flag = 'X' AND g_flag1 = 'X'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'RMMG1-VTWEG'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM f_bdc_field USING 'RMMG1-WERKS'
c_werks.
PERFORM f_bdc_field USING 'RMMG1-VKORG'
c_vkorg.
PERFORM f_bdc_field USING 'RMMG1-VTWEG'
c_vtweg.
CLEAR g_flag.
CLEAR g_flag1.
ELSE.
IF g_flag = 'X'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM f_bdc_field USING 'RMMG1-WERKS'
c_werks.
PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
ELSE.
IF g_flag1 = 'X'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'RMMG1-VTWEG'.
PERFORM f_bdc_field USING 'RMMG1-WERKS'
c_werks.
PERFORM f_bdc_field USING 'RMMG1-VKORG'
c_vkorg.
PERFORM f_bdc_field USING 'RMMG1-VTWEG'
c_vtweg.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDIF.
ENDIF.
*Processing of SCM View
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM f_bdc_field USING 'BDC_CURSOR' 'MARC-ZZJP_DOS_FRM'.
PERFORM f_bdc_field USING 'MARC-ZZJP_DOS_FRM'
t_mdata-zzjp_dos_frm.
PERFORM f_bdc_field USING 'MARC-ZZJP_APRN'
t_mdata-zzjp_aprn.
PERFORM f_bdc_field USING 'MARC-ZZJP_CON_ID'
t_mdata-zzjp_con_id.
PERFORM f_bdc_field USING 'MARC-ZZJP_NYU_SOP'
t_mdata-zzjp_nyu_sop.
PERFORM f_bdc_field USING 'MARC-ZZJP_WEI_TAB'
t_mdata-zzjp_wei_tab.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAR'
t_mdata-zzjp_car.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAS'
t_mdata-zzjp_cas.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAR_SIZE'
t_mdata-ZZJP_CAR_SIZE.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAS_SIZE'
t_mdata-ZZJP_CAS_SIZE.
PERFORM f_bdc_field USING 'MARC-ZZJP_RUPQTY'
t_mdata-ZZJP_RUPQTY.
PERFORM f_bdc_field USING 'MARC-ZZJP_BIO'
t_mdata-zzjp_bio.
PERFORM f_bdc_field USING 'MARC-ZZJP_ITF'
t_mdata-zzjp_itf.
PERFORM f_bdc_field USING 'MARC-ZZJP_INIT_LS'
t_mdata-zzjp_init_ls.
PERFORM f_bdc_field USING 'MARC-ZZJP_RE1'
t_mdata-zzjp_re1.
PERFORM f_bdc_field USING 'MARC-ZZJP_RE2'
t_mdata-zzjp_re2.
PERFORM f_bdc_field USING 'MARC-ZZJP_RE3'
t_mdata-zzjp_re3.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
*Processing of SD View
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM f_bdc_field USING 'BDC_CURSOR' 'MVKE-ZZJP_PRO_ID'.
PERFORM f_bdc_field USING 'MVKE-ZZJP_PRO_ID'
t_mdata-zzjp_pro_id.
PERFORM f_bdc_field USING 'MVKE-ZZJP_BU_ID'
t_mdata-zzjp_bu_id.
PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_NAME'
t_mdata-zzjp_abv_name.
PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_ID1'
t_mdata-zzjp_abv_id1.
PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_ID2'
t_mdata-zzjp_abv_id2.
PERFORM f_bdc_field USING 'MVKE-ZZJP_SPL_ID'
t_mdata-zzjp_spl_id.
PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM f_bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=YES'.
perform f_bdc_insert.
REFRESH T_BDCDATA.
ENDLOOP.
ENDFORM. " F_PROCESS_BDC
*& Form f_bdc_dynpro
p_prog is the program name to which data is passed *
p_dyno is the screen number to which the data is passed
Routine for populating the BDCDATA structure with the
Screen related information
FORM f_bdc_dynpro USING p_prog
p_dyno.
t_bdcdata-program = p_prog.
t_bdcdata-dynpro = p_dyno.
t_bdcdata-dynbegin = 'X'.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM. " F_bdc_dynpro
*& Form F_BDC_FIELD
p_fnam is the field name to which value is passed
p_fval is the field value which is passed
p_fnam is the field name to which value is passed
p_fval is the field value which is passed
FORM f_bdc_field USING p_fnam
p_fval.
t_bdcdata-fnam = p_fnam.
t_bdcdata-fval = p_fval.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM. " F_bdc_field
*& Form F_PROCESS_DATA *
Routine to used for moving data from T_bpcs internal table to *
t_mdata Internal Table *
FORM f_process_data.
LOOP AT t_bpcs.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = t_bpcs-matnr
IMPORTING
output = t_mdata-matnr.
MOVE t_bpcs-dosage TO t_mdata-zzjp_dos_frm.
MOVE t_bpcs-appearance TO t_mdata-zzjp_aprn.
MOVE t_bpcs-idcode TO t_mdata-zzjp_con_id.
MOVE t_bpcs-prostformno TO t_mdata-zzjp_nyu_sop.
MOVE t_bpcs-weitab TO t_mdata-zzjp_wei_tab.
MOVE c_blank TO t_mdata-zzjp_bio.
MOVE c_blank TO t_mdata-zzjp_itf.
MOVE t_bpcs-uom1 TO t_mdata-zzjp_car.
MOVE t_bpcs-uom2 TO t_mdata-zzjp_cas.
MOVE t_bpcs-carsize TO t_mdata-zzjp_car_size.
MOVE t_bpcs-cassize TO t_mdata-zzjp_cas_size.
MOVE t_bpcs-rupqty TO t_mdata-zzjp_rupqty.
MOVE c_intls TO t_mdata-zzjp_init_ls.
MOVE c_blank TO t_mdata-zzjp_re1.
MOVE c_blank TO t_mdata-zzjp_re2.
MOVE c_blank TO t_mdata-zzjp_re3.
MOVE c_blank TO t_mdata-zzjp_pro_id.
MOVE c_blank TO t_mdata-zzjp_bu_id.
MOVE t_bpcs-abvname TO t_mdata-zzjp_abv_name.
MOVE c_blank TO t_mdata-zzjp_abv_id1.
MOVE c_blank TO t_mdata-zzjp_abv_id2.
MOVE c_blank TO t_mdata-zzjp_spl_id.
APPEND t_mdata.
ENDLOOP.
ENDFORM. " F_PROCESS_DATA
*& Form f_bdc_close
Routine to close the BDC Session
FORM f_close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " f_close_group
*& Form f_bdc_insert
routine to input batch data into the Transaction MM02 from the
session created
FORM f_bdc_insert.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = c_tcode
TABLES
dynprotab = t_bdcdata
EXCEPTIONS
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
printing_invalid = 5
posting_invalid = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " f_bdc_insert
Reward Points if it is useful
Thanks
Seshu -
Unable to create PR via SO for DIEN material type
Hi Gurus
Need yr expertise.. I have a request from user to create PR from Sales Order for DIEN material type..Is it possible to create PR from SO for DIEN material type?
When I try to create I hit an error "No comsumption account".. This is because DIEN material type do not have valuation class..
Pls advise on the possiblities to create PR from SO (3rd party process) for DIEN...
SanjayHi,
Not sure... but when you create the material master with DIEN as the material type the item category group will be deafulted to LEIS, change this to BANS or maintain TAS in the order and try. Please post the result.
Prase -
Screen no. for HERS Material type
Hi Friends,
I am trying to write a mass uploading program for HERS material type.
When I go to Purchasing view of HERS material type "Manufacturing details" subscreen is showing below (like Internal Material no. & Mfr Part no). i.e. it is showing the sequence as General data - Purchasing values - Manufacturing detailssub screens. Actually I want the sequence as Manufacturing details- Genaral data - Purchasing values.
When I check in OM3TE 12 is assigned to HERS material type. When I checked in OM3TB for screen sequence of 12 --- in Purchasing view I could see screen no. as 3002. The sub screen sequence is also correct.
But when I go to trnasaction MM02 --purchasing view the screen no. is 4000. (it is the screen no. to come for standard 12 screen sequence.
Am doing corectly ?
I want to get screen as 3002 in Purchasing view of HERS material type and sequence should be Manufacturing details- Genaral data - Purchasing values.
Regards,
Sai KrishnaHi Sai Krishna ,
Goto OMT3B and change the Screen no of Subscreen ( Last Column ) to :
2312 -- 3rd Row
2311 -- 4th Row
2302 -- 5th Row
At first note all the numbers in last column and then change it.
Leave the others without any changes.
Regards
Ramesh Ch -
Allow mov type 261 and 262 for a material type only
Requirement is to allow movt type 261 and 262 for a particular material type.( Assume Only 261 - 262 issue transactions happen against that material type.)
User to be restricted, while material issue (migo), for the material type XXXX to 261 - 262 movt type only.
No any other movt type allowed for this material type while issuing material.
All suggestions welcomed.
Regards,
RakeshThanx amit.
But same user uses all other movt types for other material type also. -
Print in different page for different material type in Sapscript
Hi all
How do I do the above matter?
Currently I have a script that print all material according to some condition.
My client request to have a different page of material list for different material type.
Please advise
azHi,
1) Sort the internal table by material type.
call func 'OPEN_FORM'.
loop at itab.
at new mattype.
if mattype = 'A'.
call fun 'START_FORM'.
exporting
page = 'PAGEA'.
elseif mattype = 'B'.
call fun 'START_FORM'.
exporting
page = 'PAGEB'.
endat.
call func 'WRITE_FORM'.
AT end of mattype.
call function 'END_FORM'.
endat.
endloop.
call function 'CLOSE_FORM'.
Thanks,
Nethaji. -
No PO Price tab when we create the PO for Service Material
Hi MM Guru's
when I tried to create the PO from PR for Service Material Type (DIEN), PO price Tab is not appearing in PO
can anyone let me know why this PO price tab is not coming in case of DIEN material type
Thanks in Advance
Priya
Edited by: Priya Kansal on Apr 23, 2010 6:16 PM>
Priya Kansal wrote:
> Hi
>
> There is no condition Tab at Item and header level
>
> Thanks
How this is possible. You are creating PO in ME21n, right? It should be there. Look closely. -
Function module to change the value for pricing condition type
Hello experts,
I want to change the value for pricing condition type for an item in the transaction CRMD_ORDER.
I used many function modules but none are working.
Please kindly suggest a function module that will change the value for a condition type .
I have used the following function module but its not working, please correct the coding if anything needs to be changed or added. Please help me .
Thank you.
CLEAR PRCD_COND.
SELECT SINGLE * FROM PRCD_COND WHERE KPOSN = WA_ORDERADM_I-GUID AND
KSCHL = COND_TY.
IF SY-SUBRC = 0.
* MOVE-CORRESPONDING PRCD_COND TO L_COND_CHG.
* CLEAR L_COND_CHG-KBETR.
L_COND_CHG-STUNR = PRCD_COND-STUNR.
L_COND_CHG-KBETR = COND_PRC.
* L_COND_CHG-KSCHL = COND_TY.
INSERT L_COND_CHG INTO TABLE T_COND_CHG.
L_HEAD_GUID = CRMD_ORDERADM_H-GUID.
L_ITEM_GUID = WA_ORDERADM_I-GUID.
INSERT L_HEAD_GUID INTO TABLE HEAD_GUID.
INSERT L_ITEM_GUID INTO TABLE ITEM_GUID.
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
IT_HEADER_GUID = HEAD_GUID
IT_ITEM_GUID = ITEM_GUID
IMPORTING
ET_ORDERADM_H = LT_ORDERADM_H
ET_ORDERADM_I = LT_ORDERADM_I
ET_PRIDOC = IT_PRIDOC_RD
ET_DOC_FLOW = T_DOC_FLOW
* CHANGING
* CV_LOG_HANDLE =
* EXCEPTIONS
* DOCUMENT_NOT_FOUND = 1
* ERROR_OCCURRED = 2
* DOCUMENT_LOCKED = 3
* NO_CHANGE_AUTHORITY = 4
* NO_DISPLAY_AUTHORITY = 5
* NO_CHANGE_ALLOWED = 6
* OTHERS = 7
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MOVE-CORRESPONDING LS_PRIDOC_RD TO L_PRI_COND.
INSERT L_PRI_COND INTO TABLE PRI_COND.
LOOP AT IT_PRIDOC_RD INTO LS_PRIDOC_RD.
MOVE-CORRESPONDING LS_PRIDOC_RD TO L_PRIDOC_CHG.
L_PRIDOC_CHG-PRIC_COND = PRI_COND.
L_PRIDOC_CHG-REF_GUID = LS_PRIDOC_RD-GUID.
L_PRIDOC_CHG-COND_CHANGE = T_COND_CHG.
INSERT L_PRIDOC_CHG INTO TABLE PRIDOC_CHG.
ENDLOOP.
LOOP AT LT_ORDERADM_H INTO LS_ORDERADM_H .
MOVE-CORRESPONDING LS_ORDERADM_H TO L_HEADER.
INSERT L_HEADER INTO TABLE HEADER.
ENDLOOP.
LOOP AT LT_ORDERADM_I INTO LS_ORDERADM_I.
MOVE-CORRESPONDING LS_ORDERADM_I TO L_ITEM.
INSERT L_ITEM INTO TABLE ITEM.
ENDLOOP.
L_FIELD-FIELDNAME = 'STUNR'.
INSERT L_FIELD INTO TABLE FIELD.
L_FIELD-FIELDNAME = 'KBETR'.
L_FIELD-CHANGEABLE = 'X'.
INSERT L_FIELD INTO TABLE FIELD.
L_INPUT-FIELD_NAMES = FIELD.
L_INPUT-REF_KIND = 'E'.
L_INPUT-REF_GUID = LS_PRIDOC_RD-GUID.
L_INPUT-OBJECTNAME = 'PRIDOC'.
INSERT L_INPUT INTO TABLE INPUT.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
IT_PRIDOC = PRIDOC_CHG
IMPORTING
ET_EXCEPTION = EXCEPT
CHANGING
CT_INPUT_FIELDS = INPUT.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH EXCEPT.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
IT_OBJECTS_TO_SAVE = HEAD_GUID
* IV_UPDATE_TASK_LOCAL = FALSE
* IV_SAVE_FRAME_LOG = FALSE
* IV_NO_BDOC_SEND = FALSE
* IT_ACTIVE_SWITCH =
IMPORTING
ET_SAVED_OBJECTS = SAVED
ET_EXCEPTION = EXCEPT
ET_OBJECTS_NOT_SAVED = UNSAVED
* CHANGING
* CV_LOG_HANDLE =
* EXCEPTIONS
* DOCUMENT_NOT_SAVED = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK AND WAIT.Hi,,
To be able to call a function module in an update work process, you must flag it in the Function Builder. When you create the function module, set the Process Type attribute to Update with immediate start
Alternatively u can use this function module.
CRM_STATUS_DATA_SAVE_DB
BAPI_CUSTOMERCRM_CHANGE (If u wish to use a bapi for this).
Also , Let me know what error you got when implementing other function module.Does the function module didnt return any error but still the value is not changed for pricing condition type? -
The new 11gr1 Users Guide says
"Automatic Long Tile Administrative Request Recovery
Long running tile admin requests that are interrupted due to Fusion Middleware or
MapViewer shutdown will be able to resume automatically after MapViewer is
restarted. (You do not need to do anything to enable this feature, other than creating
the new database view USER_SDO_TILE_ADMIN_TASKS if it does not already exist.
For more information, see Section 2.9.)"
When I go to 2.9 it says: "MapViewer also uses some other metadata views, which may be defined in other files."
I couldn't find the definition for the MDSYS.USER_SDO_TILE_ADMIN_TASKS, anyone here know where I could find it ?in MAPVIEWER_HOME/web/WEB-INF/admin/mcsdefinition.sql
Use that file. Run the relevant commands as sys or a privileged user. -
Where to find the documentation for technical wage types?
Gurus,
I need help finding the documentation for technical wage types such as /001...
There are hundreds of them...
Thanks,you can go to the view v_512w_d, choose your country grouping, the list of wagetypes will be displayed.
there will be a help button available next to the wagetype name.
you can view documentation either for technical or modal wagetypes.
Have a good day! -
Material Master views for every material type
HI Expertis,
I am facing to the big problem. My requirement is to identify the Material Master Views relevent to the each and every Material Type.
As an example, for the material type "FGTR" what should be the required views to create material master?
From the MM01 Txn i found 36 Material types. Also found the standard views in "OMS2" Txn. But in OMS2 txn it gives me almost all the views in material master.
Atlease i hope to categorize the material types which are going to use same material views. So i can ask abaper to develop it.
these are the required Material types : MODE, FGTR, WETT, KMAT, LEER, LGUT, FERT, FOOD, INTR, CONT, IBAU, HERS, NLAG, NOF1, UNBW, HIBE, VERP, FRIP, PIPE, FHMI, ROH, LEIH, HALB, DIEN, ERSA, HAWA
I would be gratefully thank u, if u can guided me on this matter.
Thanx & Regards,
Rashika.Hi,
You can ask your abaper to write a small program by using table t134(T134-PSTAT) and T132T .From this tables ,for each material type, you get all views.
User department Maintenance status
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
hopw this will help you.
With Regards,
Jaheer -
"Mfr part profile" setup for various material types
Hello All,
I'd like to set a default value of "Mfr part profile" field ("Purchasing" screen in 01 Std industry sequence) different for various material types. Currently I have 2 entries maintained in MaterialsManagement>Purchasing>MaterialMaster>DefineManufacturerPartProfile (one with AMPL management and one without). I'd like to get the first entry set as default for HAWA material type and the 2nd for ROH.
Thanks in advance for your help on this!
JacekHi Troinski,
Its not possible in SAP, you can create Z transaction for create material wth dafult values.
Thanks
Bala
Maybe you are looking for
-
Since installation of Snow Leopard 10.6.8 a week ago, I have not been able to print checks on Quicken 2006. Now I find that Word 2004 will not "save as" and freezes. Any help?
-
Excute the program it will take more time its urgent for me REPORT ZRPT_MM_006. TYPE-POOLS: slis. tables : likp, lips, bseg, bkpf, mara, t001w, makt,ekko,ekpo. DATA : gt_fieldcat TYPE slis_t_fieldcat_alv. DATA : heading TYPE slis_t_listheader. DATA :
-
Unable to see the next pages in smart form
in my smart form i designed 3 pages... in the first page i don't want data in main window...but i gave the main window dimensions as in 2nd and 3rd page(same height and width)... in 2nd and 3rd page i want to display the data in main window... but wh
-
How do I move images between files within Lightroom 4?
I find I have to move a good many images among files. How can I do this within Lightroom 4? If I have file S, the sending file, with 25 images, how do I send five images from S to R, the recipient file?
-
How to search data dictionary for interval partitions?
Oracle 11.2.0.3 When I query DBA_PART_TABLES.PARTITIONING_TYPE it says 'range'. I want to be able to differential an interval from other range based partitions in the data dictionary? used this example. shows 'range' http://www.rittmanmead.com/2008/0