I need the IP values and Subnet Mask which is given by the ISP for my jetpack so i can configure my smart tv
i need the IP values and Subnet Mask which is given by the ISP for my jetpack so i can configure my smart tv
Your public IP Address is provided by the ISP. Your smart TV does not need to know this information unless you plan to host some kind of an application or service for folks on the internet through your TV. It wouldn't work anyways since all Jetpacks sit behind a VZW NAT firewall and blocks hosting capabilities by default.
What you more than likely are referring to is the Default Gateway and Subnet mask of the Local Area Network being hosted by your Jetpack. By default these values should be something like 192.168.1.1 and 255.255.255.0. You can confirm the DG and SM by connecting a computer to the Jetpack. Every computer has a way to look up the networking information. On a Windows OS you would open up a CMD window and type in "IPCONFIG".
If you shoot us the model number of your Smart TV we may be able to look up a User Guide to confirm what kind of info is needed to connect to a wireless network. Most of the time exchanging the IP information is done automatically during the connection process. It would also be nice to know which Jetpack model you have so we can compare the User Guide for that device with your TV.
Similar Messages
-
How to change IP address and subnet mask without using the sys-unconfig ?
I have Solaris 10 x86. I've ran into problems using the sys-unconfig command
to change hostname and IP address.
How to I manually change the IP address and subnet mask values on Solaris 10 manually?
Thanks.We just switched over a DNS server by using ifconfig, (same subnet), and killing named. seems to be working fine, anything I should look out for ?
steps:
Prep -
- change name in /etc/hostname.e1000g0
- change name and IP in /etc/hosts and /etc/nodename
- # uname -S dnsint02
Activate
- unplug old dnsint02
# ifconfig e1000g0 192.168.2.80
# kill -9 [PID of named]
Cleanup
- Remove old key on clients I SSH from.
- reconfigure backup software for new name/server combo.
Edited by: HarryC on Jun 25, 2009 9:29 AM -
When we run query how it gets the characteristic values and attributes.
Hi,
When we load transaction data it chacks characteristic values then SIDs then DIM IDs then insert DIM IDs into fact table but when we run the query how it checks and gets the characteristic values and attributes.
Bye
GKwhen we run the query how it checks and gets the characteristic values and attributes.
Just the opposite way you have described. It gets from the corresponding masterdata tables, with the connected SID. -
How to configure the eth1 port of NIcRIO 9024 to another IP address and subnet mask
Hi ,
I am using cRIO 9024 and am planning to configure it to be an MMS server that interacts with a client which is in another network with different IP and subnetmask. I want to run the server VIs from the host computer via the eth0 port and want to communicate the MMS messages through the eth1 port. the eth0 port is configured as a static IP as shown in the screenshot attached and would like to assign a separate IP and subnet mask to the other port . But when I try to save the configuration I get the error "Could not save your changes tot he target.The subnet mask for eth1 is invalid" .
I have already directly cross connected the Crio and have disabled the firewalls and still am not able to configure it.
1) is it possible to configure the ethernet ports to have separate IPs corresponding to different networks and thus the subnet masks?
2) If its possible then what is the mistake i am doing while configuring it ?
I would be extremaly grateful to have a reply on this as its pretty desperate to spend a lot of time just to set up the IP configurations..!!!!!
Regards
AbhinavDear Abhinav,
I'm sorry but what you are tryining to do is not suported by the Second Ethrnet Port on any cRIO and so you getting this error meeage.
Here a abstract out ouf the KnowledgeBase How do I Configure the Dual Ethernet Ports on Real-Time Controllers?:
Ethernet port 2 is currently not supported to communicate outside its own subnet. There is no capability of configuring the Default Gateway for Ethernet port 2 and therefore cannot connect to a large isolated intranet. However, there appears to be a common misconception that this port can only be used for communication between NI products: this is not the case, though any communication through the secondary port must be within the same subnet.
Kind Regards,
SG3 | Applications Engineering | National Instruments | NIG | -
When I try opening Safari it says cannot connect because not connect even though I am connected. When I go into the settings my Ip Adress and Subnet Mask show up but the router or DNS. I have tried resotring,resetting and forgetting the network but nothing has fixed it so far
What iP address is shown? If it starts with 169 yo never connect to the router.
Have you tried powering off and then back on your router?
Does the iPod successfully connect to other networks? -
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches. I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
I get that the preview file got corrupted somehow. Is there some way to fix this problem without building a new catalog?Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.
-
My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?
Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS -
Retrieve data from a text file, incrementing the last value and save new value below
Hi
This was working initially. It is part of my LabView Project. I was trying to create a unique number that increments every time the adds the value to the list. It works on computer perfectly. But when I put this on a PDA, it seems to create a blank space when reading the contents of the text file after the last value, which means 0 + 1, which is not what I want.
Please run the testUniqueNoOnPDA.vi first and change the path to C:\uniqueNumber.txt and save the uniqueNumber.txt file to your C drive and see What I am trying to do. Click the Enter button to increment.
Why does the PDA create a blank space after the last value and a computer does not?
I was working perfectly all week and it is not working well now.
Help please, I think I'm missing something
Attachments:
uniqueNumber.txt 1 KB
testUniqueNoOnPDA.vi 33 KB
testUniqueNoOnPDA.lvproj 4 KBIt works perfectly, it was a hardware problem. It depends on what PDA I used.
-
I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me
Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
-Kevin P.
Message Edited by Kevin Price on 12-01-2006 02:42 PM
Attachments:
Binning example.vi 51 KB
Binning example.png 12 KB -
my wife just got the new macbook air. What cable do I need to copy music and photos from my 2007 macbook to the new macbook air?
Try doing it without a cable!
Use AirDrop, described here:
http://support.apple.com/kb/HT4783
UPDATE - Oh, sorry, I see the article points out the MacBook is too old for AirDrop.
Message was edited by: sberman -
How to retrieve the procedure value and pass the value to a form field
How to retrieve the procedure value and pass the value to a form field?
Set property for the field and the value is the actual procedure/function.
Cheers -
How to get the kerning value and set it to back use script?
hi,guys
I come back again.
I encountered a kerning problem.
how to get the kerning value and set it to back use script?
Thanks very much!For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port. -
Hi,
To analyze Lync issues I have installed these applications in my windows 7 x64 laptop
1) network monitor 3.4
2)Lync network monitor parser
3)nmdecrypt2.3
4)network monitor parser3.4
Installtion got completed successfully but when I try to start capture I get this error everytime.......
"None of the network adapters are bound to the Netmon driver.If you have just installed, you may need to log out and log back in order to obtain the proper rights to capture. Please refer to the product help for more information"
I read many technet articles and other blogs but that didn't solve this issue. I tried things like
A) Run as administrator
B) nmconfig /install in cmd
So could you please help me how I can fix this issue?
Regards,
AjitSeems our driver didn't get installed. What you see when you type "sc query nm3" from a command prompt?
Thanks,
Paul -
Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?
Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?
I've installed Lion over Snow Leopard and all my non Apple software is still here - you may want to check if your software will work with Lion and I would definately recommend having a bootable backup in case anything goes wrong
Regards,
Colin R.
Maybe you are looking for
-
My Ipad2 worked perfectly before ios6 upgrade. It now freezes occasionally and I have to reboot to get it to work. Also the WSJ app will now freeze if I try and run one of their videos that is imbedded in the article. My only work-around is to stop (
-
Can i install a wireless card in my Satellite P30-141 's wireless bay?
The P30-141 doesn't come with wireless functionality and i can't track any wireless antennae cables which should reside within the top casing of the machine, but i'd like to know if it's possible to undertake my own installation of a toshiba wireless
-
Can't get clamshell mode to work
I would like to use an A1081 HD cinema display with my macbook pro and I have connected it to the HDMI port. I have attached an external keyboard and a mouse in one of the USB slots on the keyboard. I set it to mirror display, but evey time I close t
-
Pricing in crm standalone server
Hi All, Can anybody tell me how to configure pricing in standalone server. If it is possible can anybody send me the document for configuration? Thanx Saravana
-
I have purchased my apple iPhone 5 from Germany, and now I am back to India. I need to contact the German apple support team for queries related my device. How to contact the apple support team in Germany from India ?