I need the mother board plug for the battery charger and Bios Battery for an XT178 Laptop?

HP xt178 Laptop (1P) F4685H SN: TW24604214
I need to replace the motherboard plug that the Battery Charger plugs into as it is broken.
The Bios Battery has failed and is NO: ML1220 with a number 28 in ink stamped on it.
are these parts available from HP or can you provide me with common part numbers.
Jack

Hey JD,
That's a reaalllllllllyyy old laptop.  As an HP employee I feel obligated to recommend picking up a new one at your local retailer.  
If you are serious about finding parts then you may be out of luck.  HP stopped servicing that notebook in 2006.
http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=F4685H
-wes
I am an HP employee.

Similar Messages

  • What are my options for in car charging AND music playing for iPhone 3G?

    Ok, before you direct me to the other threads, I have read them, and I still don't know what product I can buy for my 3G that will charge my phone and play music in my car.
    With my original iPhone I was using the Griffin iTrip FM transmitter. It always gave me that message to ask if I want to switch to airplane mode. I would pick yes or no, then it would charge and play music.
    When I plug in my 3G I get the yellow triangle warning that says this device doesn't charge this phone (paraphrasing of course). It appears that it will play music, but if it won't charge my phone then I'm going to run the battery down fast. I rely on being able to charge my phone a bit during the day in the car.
    I do not have any AUX port in my car or any kind of iPod hookup in my car that I am reading about on other threads. As far as I know, an FM transmitter or a cassette adapater (I do have a tape deck) are my only options. However, since my husband's car that I drive on the weekends to work does not have a tape deck, I would really prefer a device that does not use a tape (also my previous experience with a tape adapter is that they stop working after a short while).
    The power port in my car is nearly at the floor, nowhere near the dash, so any device I use cannot require me to rely on the "on device" controls to control the music.
    I see this on amazon
    *Griffin PowerJolt Car Charger for iPod and iPhone (Black)*
    *Technical Details*
    *¿ Enjoy full use of your iPod or iPhone during car trips, and arrive with your battery fully charged.*
    *¿ Includes detachable Dock Connector to USB Type A cable that can be used separately to connect your iPod or iPhone to your computer.*
    *¿ Includes USB Type A to mini-B cable so you can charge while using Griffin iTrip or other dock connector devices that have built-in pass-throughs.*
    *¿ 2 Amp automotive blade-type fuse protects against spikes and surges and is easily replaceable.*
    *¿ Works with iPhone, iPod models that feature full-size dock connector, and iPod shuffle (1st generation).*
    And in another thread, people reported that the Griffin powerjolt DOES work with the 3G, so does the above description mean that I can use this device with my iTrip to charge and play music?

    My Pioneer iPod car audio adapter cable does NOT charge my iPhone 3G and they have no plans to change this at this time.
    I have a cheapo Griffin car iPod charger (the kind that has a plug for the cigarette lighter and a separate cable that has a mini-USB on one end and a dock connector on the other) and it DOES charge my 3G iPhone.
    Go figure, but for now there it is.
    Someone HAS to be working on an adapter that goes between the 3G iPhone and a dock connector device to fix this charging issue (which I guess has to do with the last iPhone and many iPods being able to charge via USB at 5V and/or FireWire at 12V but the new iPhone only charging via USB at 5V)

  • HT4527 My old pc ran windows vista and mother board failed but the hard drive was good. I have a new system now and installed the old hard drive. how do I get itunes and all my music working now?

    Hello, my old pc ran vista o.s. and the mother board died but the hard drive was good. I got a new system running windows7 and installed old hard drive to recover pictures and other data. How do I get my itunes and all my music back up and running.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?

    I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?

    I think that we all understood what you meant. If the extension cord is no longer working, then return it.
    We are all trying to tell you that you can plug the power block into a standard household extension cord - using the short cord that came with the iPad - and there is no need for the extension cord that you bought.
    Edit - one upped by the lovely lady with the pretty kitty avatar

  • How can I re-activate eBooks in Adobe Digital Editions after changing the mother board of my MacBookPro?

    After changing the mother board of my MacBookPro to fix the video display issue, all my previous eBooks in Adobe Digital Editions cannot be activated. The error message: "Activation Server error - code E_ADEPT_INTERNAL". Please advise what I can do to read my eBooks again?

    Hmm, it shouldn't be that much of a problem. I searched my entire drive for "digital editions", and this is the whole thing:
    /Applications/Adobe Digital Editions 3.0.app
    /Users/user/Library/Caches/com.adobe.adobedigitaleditions.app
    /Users/user/Documents/Digital Editions
    /Users/user/Library/Preferences/com.adobe.adobedigitaleditions.app.plist
    /private/var/db/receipts/com.adobe.adobedigitaleditions.app.bom
    /private/var/db/receipts/com.adobe.adobedigitaleditions.app.plist
    /Library/Preferences/com.adobe.DigitalEditions.plist
    The application itself, three small files scattered in your user account, to unimportant installation receipt files, and another preference file in the root Library folder. Removing those should remove everything related to version 3, which is what I have installed.
    Where I substituted "user" above (for the three entries of /Users/user/...), replace that with whatever the actual name of your user account is.
    Edit: I double checked the installer using a small app that sorts out every file in an installer, and where each item would normally be installed. The main app is literally the only item in the installer. The receipts are created by the OS per the installer's data, and the other minor preference files are created when the app is first run. There is nothing else.

  • HT4060 My iPad needs recharging. I plug in the charge cable in what I think is the recharging slot. I cannot find anything in any of the literature on the website that identifies the charging slot but the plug seems to fit! But it won't charge.

    My iPad needs recharging. I plug in the charge cable in what I think is the recharging slot. I cannot find anything in any of the literature or on the website that identifies the charging slot but the plug seems to fit! But it won't charge.

    Ther does seem to be  quite a lot of comments about this issue
    It seems the charger is a little slow and takes upto 4 hours to charge
    closing all apps and leave the  ipod in standby seems to off the best charging experience
    I hope the Photo helps 
    In my view apple should have included a better charger for the price, the new 12w adaptor will reduce the charge time and resolve you problem, however its about $15
    http://store.apple.com/uk/product/MD836B/A/apple-12w-usb-power-adapter?fnode=3c# overview

  • My Macbook is 5 years old (purchase date July 06). It suddenly broke down : the diagnostic by Apple is that I have to replace the Mother Board.

    My Macbook is 5 years old (purchased July 06). It suddenly broke down. The diagnostic by Apple Store is : I must replace the Carte Mere (Mother Board ?). The repair cost is outrageous ( $800). I cannot afford it and do not accept it. IT tech is supposed to last longer than a mere FIVE years. Even if it is out of date after a year, a computer should not technically fail like that. That is what I cannot accept. Will Apple pay for it ?

    Sorry I wasn't clearer ... in the case of an auto, agree that owner wear items/maintenance aren't relevant to the discussion ... what if the electronic dash, for example, dies in 5 years? Unless you have an extended warranty, the manufacturer isn't obligated to repair it for free.
    It's unfortunate that the logic board has failed after 5 years, however, it does happen.  It's not unusual for notebook hard drives to fail in 3 to 5 years, too.  You can always ask Apple if they will repair it. at no charge.
    As a related aside, if you do repair your Macbook, you should have a good hard drive backup routine, assuming that your hard drive is the original one.  Since notebook drive failures in the 3-5 year timeframe aren't unusual, you've gotten good life from your drive, and you want to be prepared when it does stop working.  

  • Powe Mac G5 early 2004 gives error (no memory installed) Do I need to replace the Logic Board. Machine powers up,2beeps and power lights blinks 2 times and stops there, No video or any thing?

    I just recently aquired a Power Mac G5 early 2004.
    When I power the system up. I get 2 beeps
    and the small front panel light blinks 2 times continuously.
    The error codes show that it means a memory problem or
    no memory present. Memory is installed.
    In this case do I need to replace the mother board.
    The system goes no futher, no video or any thing.

    Well, it's possible that someone pulled the original RAM from the computer before they sold it, and repalced it with incompatible RAM. That, believe it of not, would be the best of all world in this case, as a working G5 logic board and its installation could cost as much as a refurbed Intel mac.
    I would contact the seller if you did not personally see the computer working before you bought it.
    As the computer had to be moved about--possibly shipped--to change hands, first check that all internal cards and RAM Modules are fully seated. They can work loose in some models.

  • Where do I find the mother board part number of my notebook Pavillon dv9379ea?

    How can I find the part number of the mother board of my notebook Pavillon series dv9000, model dv9379ea?

    HI,
    fabioweb wrote:
    How can I find the part number of the mother board of my notebook Pavillon series dv9000, model dv9379ea?
    Download and run CPU-z. Go to the Mainboard tab.
    There is another identifier for your notebook. Look on the barcoded sticker on the bottom of your notebook. Please post number 2.
    For part number GH839EAR the system board (motherboard) is HP p/n: 434660-001
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • My mac book was refused by the apple service center as the mother board was crashed , pls help me what to do

    my mac book was refused by the apple service center as the mother board was crashed , pls help me what to do

    If you live in a big city, then I would recommend an independent computer store that fixes Macs. There are many mom and pop computer stores that fix your computer. Just Google it.

  • I have a Macbook air which has had to have the mother board replaced twice.  It is starting to crash again a few months after the last disaster.  It is out of warranty and I am out of luck. The computer freezes frequently. Any recommendations?

    My Macbook air has had to have the mother board replaced twice.  It is starting to malfunction again -- it frequently freezes when I am on the internet.  The screen also pixelates when I go from one page to another.  The warranty is expired.  Any recommendations?

    Hi angier,
    How long has it been since the last logic board replacement? Was the previous repair(s) done by Apple directly or via an authorized service provider? If you're on MLB #3 and you're still seeing the same or very similar problems, I'd contact the place that did the service last, especially if it was in the past 90 days.
    When you get a repair done through Apple, even if the machine is out of warranty, the service (and parts) carry a 90-day limited warranty. From my experience, Apple is often times flexible on this window as well especially if it's been a repeated repair.

  • Tripped over cord and broke the piece that plugs into the wall

    I've heard a lot about people breaking the piece of the power adapter that plugs into the PowerBook but I have never heard of anyone breaking the other end.
    Last night I tripped over the cord and shattered the piece that plugs into the wall (Apple PN 922-5863) This is not the big white thing with the apple on it.. it is just the plug. The PB ships with a 3 prong 5 foot long alternitive so there is no emergency but I would like to replace it at some point.
    I called Apple and they recommend getting a whole new apapter (85 bucks) which seems to be a tad extreme for a little piece of plastic that is completely seperate from the adapter.
    There is a World Adapter kit for 40 bucks that contains one of these little guys. But again, 40 dollars seems a bit extreme for this little guy.
    My question is this... This piece is a common part in Apple wall adapters.. it seems to be a component piece part of the iPod Wall adapters, PowerBook, iBook, AirPort Express, etc. What is the least expensive way for me to get my hands on one of these wall-plug-adapter things?
    Thanks,
    -cd

    If it's the localised plug part that is broken you don't need to exactly replace it but in its stead use a standard C8 (figure 8) power cord. If you don't have one spare you can always get a really cheap one from most stores that carry electrical cables such as Radio Shack, Walmart etc etc.

  • Has anyone ever experienced the situation where plugging in the USB connector to the charging source (high-power USB port or Apple charger) halfway, then pressing it in firmly, results in the iPad not charging?

    Has anyone ever experienced the situation where plugging in the USB connector to the charging source (high-power USB port or Apple charger) halfway, then pressing it in firmly, results in the iPad not charging?

    It's highly likely that there is a poor connection in the phone - either a pin in the dock connector or internal wiring harness.  No software fixes or "tricks" would work, but I would recommend restoring in iTunes, first using a backup and if needed restore as a new phone. 
    Otherwise, opening and repairing the phone takes some tech knowledge that can't be relayed here.  Apple doesn't repair phones other than replacing batteries (not inconceivable that you have a bad battery), but offers "out-of-warranty" replacement (refurb) phones for $149 (US).  3rd party iPhone repair centers may be able to fix it for less.  Google to find them,
    Tried soft and hard resets
    FYI, there's no such thing as "soft" or "hard" resets in iPhone terminology.  There is only one phone reset. You'll see those terms thrown around by technically ignorant posters, but they mean different things to different people and are actually archaic, 1980s PC terms that have nothing to do with iPhones.
    See the User Guide, Appendix B.

  • I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

    I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

    I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1.  Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
    2.  Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly.  There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
    3.  Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • I have had my iPhone about 1 1/2 years...with no problems. About 2 days ago my battery drained within an hour, I plugged it in to charge and it heated up so hot the temperature warning popped up on the screen. The phone will not hold a charge now.

    I have had my iPhone 4 for about 1 1/2 years, with no problems. A couple days ago the battery drained in about an hour, I plugged it in to charge and it was not charging. After a few hours a message popped up on the screen about the temperature being too hot...the phone was very hot when I picked it up. The battery will not hold a charge and it heats up every time I plug it in. Suggestions???

    Make an appointment at the genius bar. An out of warranty replacement is $149.  It sounds like it may have gotten wet.

Maybe you are looking for

  • Mystery/Phantom piano sound

    I've been working on a song in GarageBand 09, and I thought a little piano here and there would be nice. I created a software instrument track for the EZ Keys plug-in and did a little editing, but I decided it was easier to just edit within EZ Keys i

  • CMP entity bean with compound primary key

    I'm trying to use a compound primary key in a CMP entity bean. I've created the custom primary key class okay, and I have the prim-key-class set in ejb-jar.xml. My client app gets the home reference okay, but when it tries to find an entity, I get th

  • HT5691 How long do I have to purchase applecare

    Buying a iPad for my daughter do I need to get the AppleCare now or can I get it after Christmas when she first registers it?

  • How to update my iPad to iOS?

    How can I upgrade my iPad to iOS

  • URGENT: Capturing data through serial port

    Hi, My problem is with the use of javax.comm API. I have an RFID tag reader connected to the serial port. It is a handheld reader and reads tags when its trigger is pulled. The data that is read is sent to the serial port. This is what I want to capt