I need the password for BronzeZebra-guest. Please help asap

I need the password for BronzeZebra-guest. I don't know how you find this or get it but I need it now. Please reply to [email protected]

If you have Cisco Connect open it up & look around & it should show the passwords for both main & guest. At least mine did when I could access it.
Kathi

Similar Messages

  • HT2968 I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?

    I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?

    Hi AlphaCentori,
    If you are having issues accessing the Apple ID that was used to originally purchase those apps, you may find the following article helpful:
    Apple Support: Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/ht5312
    Regards,
    - Brenden

  • What is the password for tiger guest

    what is the password for tiger guest on ciso connect

    justonce2314 wrote:
    what is the password for tiger guest on ciso connect
    Open Cisco Connect and on Guest Access Window you will see there the settings for your GUESTACCESS NETWORK. 
    ♥'s TECHNICAL

  • HT5621 I Have followed all the steps and still cant remove iCloud to my existing account and add to the new one, the old email account was changed a year ago and cant get that email plus the password don't work please HELP!!

    I Have followed all the steps and still cant remove iCloud to my existing account and add to the new one, the old email account was changed a year ago and cant get that email plus the password don't work please HELP!

    Welcome to the Apple community.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone".
    You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • I lost my ipad and i need the serial number and IMEI , please help me how?

    i lost my ipad and i need the serial number and IMEI , please help me how?

    If you have registered your device, you can go to https://supportprofile.apple.com/ and log into your apple id.  Your devices appear there with serial numbers.
    Additionally, your serial number is included on the original receipt when purchased at any Apple Online or Apple Retail store, or any Authorized Apple Reseller.

  • Why is my account of the apple ID asks me to change the password every time. Please help me. Thank you

    Why is my account of the apple ID asks me to change the password every time. Please help me. Thank you

    In Firefox all browser windows and tabs use the same cookies that will identify you to the server.
    If you open a different account then existing cookies are send to the server and the server sees that you already signed on (authenticated).
    You can look at one of these if you want to sign on with different identities at the same time:
    CookiePie: http://www.nektra.com/oss/firefox/extensions/cookiepie/
    CookieSwap: https://addons.mozilla.org/firefox/addon/3255
    Multifox: http://br.mozdev.org/multifox/ - Different logins at the same time

  • Cannot change iCloud ID in iOS8 - Can't Sign Out without turning off Find My iPad - which needs the password for the old iCloud ID

    I have read the older responses to questions re how to change the iCloud account from an old ID/email address (OLD ID) - to a new ID/email address (CURRENT ID).  They all say go to Settings>iCloud - and Delete the iCloud account.  In iOS 8 - there is no Delete - but there is a Sign Out.  BUT - when I choose the Sign Out it shows a pop-up with the OLD iCloud ID - saying I must first sign IN to iCloud and enter a Password Required to turn off the Find My iPad feature.
    I have tried using the password I remember as being correct for the OLD iCloud ID.  Doesn't work.
    I have tried using the password for the CURRENT ID - even though the pop-up has the OLD ID displayed.  Doesn't work.
    I'm out of ideas - except Reset??
    Should I Reset All Settings? 

    I finally found a work-around in another thread on this Using iPad community.  Basically, I had to first make sure that the Messages and Facetime were associated with the CURRENT/NEW ID.  (I could do this by simply erasing the OLD ID and typing in the new - in General>Messages and General>Facetime.  I then used by PC to change my Apple ID back to the OLD ID/EMAIL - but leave the new password alone. 
    I then went back to Settings>iCloud - clicked on Sign Out.  When it asked me to log on -- with the OLD ID/EMAIL -- to turn off the Find My Phone - I did so using the Password that was originally used with the CURRENT/NEW ID.  This worked.  So I finally was able to close out of the iCloud account that used the OLD ID/EMAIL.
    I then went back on my PC to change my Apple ID back to the CURRENT/NEW ID/EMAIL.
    I then went back to the iPad Settings>iCloud - and signed on using the CURRENT/NEW ID/EMAIL.
    So everything is OK now.
    WHEW!!!
    Not sure why this has to be so difficult.  But thanks everyone for your suggestions.

  • Banned from a website. Need to use for work. Please help.

    I was recently banned from a website. I didn't do anything wrong and they won't tell me why I have been banned. My husband had an account on the website and as soon as they closed my account, they also closed his. We don't know if someone else used out IP address on this site and violated their rules or if we unknowingly violated their rules ourselves; they won't tell us.
    The problem is that we need to be able to access this website for our work. We work from home and it's essential. We weren't sure if they had banned us by IP address, so we had a friend create an account. The account is legit and legal. He then gave us the username and password. We accessed the account from our computer at home and the account was almost immediately shut down. The friend was able to straighten things out with the company and get the account set back up, but we cannot use our computer at home to access this site. It's obvious that any access by this IP address will result in ANY account being closed.
    We have a PC desktop, a MacBook laptop, and a wireless connection for the laptop (not sure how much info is needed, so I'm trying to be thorough).
    I'm not going to ask someone to help me hack a site or anything. And after hours of research, I think we understand enough about proxy servers to use one of those effectively. I also know that I can call my ISP and request an IP address change (which may or may not be honored).
    However, I have read other message boards and learned about cookies that websites send to your computer to identify you. I understand that most of those cookies can be cleared out by simply clearing the info from the browsing history (including cache, cookies, etc.) But I also read that they sometimes send files that are buried deeper in the computer. So here's my question...
    How can I erase EVERYTHING that this website might have sent to my computer to be able to identify it? I must use the laptop to access the website. I'll work on the IP address issue on my own. But we can't use the desktop to access the site for reasons that are irrelevant and the explanation would be even more long-winded than what I've already typed here. We have to use the laptop. And I need to be ABSOLUTELY certain that the site can't identify the computer. I won't try to use my friend's account again until I'm certain that it won't be closed.
    Let me reiterate this for those who are concerned: the friend has give permission for us to use his account, we have done nothing illegal on the website we've been blocked from, nor do we plan to do anything illegal on the website. We have done nothing illegal in any way, and I want LEGAL solutions to this problem. If we are not able to access this website, we will suffer financially in a severe way and are desperate to make sure that we can clear out cookies or whatever other tracking info has been put into the MacBook.
    Can someone please help us?

    Thank you for the info on onyx. I will try that. I actually took my computer to the Apple store and someone there "cleaned" it out for me.
    As for why we can't resolve the issue with the website, we tried to talk to them about it but they just cut us off and said they weren't going to discuss it and that they wouldn't reopen the account.
    We have one account as employees and the other accounts (the ones that were closed) were customer accounts. The two departments are separate, and we do not want to bring our account to their attention again and risk them connecting the customer accounts with the employee account and then closing the employee account as well.
    We were using the customer account to monitor the employee account. Quality of video and sound, that kind of thing. Nothing fishy there. But since the guy on the phone didn't make the connection that it was our own account we were monitoring, he shut us down. Customers do the same thing to us and basically rip us off for thousands of dollars every week, and the company never gives those customers any trouble about it. So it's unbelievably frustrating. Also, we figured out how to do this by watching the activity of the other employees, since there's no "training" and we all learn from one another by watching. We don't know what would happen if someone there made the connection... whether they would just say "oops" and reopen the customer accounts, or whether they would be irritated about us using the customer accounts in that way and just shut us down completely. We'd rather not find out.
    As of now, we're using a friend's account to monitor our video and sound quality. But we're still using the same computer. That's why it needed to be "cleaned."

  • Need the password for the internet

    i need the internet password for  Nacho WiFi-guest

    Did you try opening Cisco Connect? when mine was working (before I updated my OS to Mountain Lion) when I opened Cisco Connect it showed both the main & guest passwords & other key info.
    Now if I could just get Cisco Connect udated so it will work again.
    Kathi

  • HT5687 Its 1 year 4 months of the purchase.  How can I register for the warranty for now.  Please help.

    Hi,
    I bought MacBook Pro in Sep/2012.  I did not buy the warranty at the time of purchase.  Its 1 year 4 months of the purchase now.  
    I lately came to know, that we cant register for apple warranty if we dont purchase it earlier.  
    However I want to get my Mac covered under the apple warranty.  How can I do so.  Please guide & help.
    Thanks,
    Anita

    This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
    Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */   /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls *.{crash,hang,panic} | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
    If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
    The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • How can i bypass my icloud account i forgot the password and email? please help me

    Please help me I forgot the first account that I used to my ipod touch 5th gen. After I reset it they are finding the first account that I used but I forget it both email and password because I'm using other account what I am going to do now to activate my ipod pleade some one help me

    Yo need to recover the account and password
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
    However, if you are the original purchaser of the iPod and you purchased it directly from Apple they may be able to help
    Contact iTunes
    Contact iTunes

  • My iMessage always shows up as my email never my phone number because it doesn't give me the option for that. PLEASE HELP!

    I'm having troubles with my iMessage. Every I text people when I have iMessage (Internet) it always shows up as my email. Never my number, whenever people text me it goes to my text messages (green) please help. It doesn't even give me the option of "Start new conversation from" because it won't let me click on my number when it says "Address". I need to prevent this ASAP!

    Kappy's Some Solutions for Resetting Forgotten Security Questions
    (only solutions)

  • Render Farm for FCP 7 PLEASE HELP ASAP!

    I have been searching all day for a way to get a render farm going on FCP. Problem is, any of the places that have any type of remote answer are from at least a year ago, and apply to FCP 6.
    I have no experience with setting up a render farm, but I need to render out a lot of footage with effects ASAP to meet a deadline.
    If anyone out there could A. tell me if it's even possible to set up a render farm on FCP 7, and B. how to do it, in dummy's guide terms, because I am setting this up for the first time in desperation.
    PLEASE HELP!!!
    ~ Sean

    Just as well; deadlines are not where you want to try to attempt unknown hardware hacks.
    When you get time, after your deadline has expired, tell us about your project and how you allowed your effects to go unrendered for so long. We can help you not do that again.
    bogiesan

  • I cant find the movie i recently downloaded please help asap!!

    I recently downloaded a movie on itunes and when it had just finished downloading I shut down my computer. when I turned my computer on again, my movie wasn't there. It's not under downloads, movies, purchased. Its under nothing. I went onto the store and tried to buy it again and it just said: 'you have already purchased this movie, are you sure you would like to buy it again? if you cannot find it in your library go to store>check for available downloads.
    And that is what I did, and I still cannot find it anywhere. not on my ipod, my computer no where. And my version of itunes on my laptop and on my ipod are both as updated as they can be.
    Please help me
    Kind Regards,
    XxBlondeBabe

    It sounds like it was probally not quite done downloading. I have had this happen to me too. I suggest that if your country allows it you try redownloading the content through the purchases page. If the movie is not available there you should contact support.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519

  • I am unable to get into my IPhone.  My 4 digit code is not working and my cell is disabled. I've tried connecting to iTunes to do a reset to factory default however I need the password (my 4 digit code) help!! I've been without my iPhone for 2 days.

    I'm locked out of my iPhone.   My 4 digit security code is not working.  I've tried to connect to iTunes to do a recovery however I. Order to do this it asks me for the 4 digit code.  I need to reset it but unable to get into reset as well.  Help!!t can I reset it using my iPad which is registered to the same account

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..

Maybe you are looking for

  • Using a function and array to remove stage instances

    I'm trying to figure out the best way to handle this. I have an array of items I want to be looked through and removed if a specific function is running and if the stage contains them. removalArray = [axScene, bridgeScene]; public function Removal(ev

  • [svn:fx-trunk] 11642: Simple fix for non-integer translations by first multiplying to twips before casting to int .

    Revision: 11642 Author:   [email protected] Date:     2009-11-10 19:40:31 -0800 (Tue, 10 Nov 2009) Log Message: Simple fix for non-integer translations by first multiplying to twips before casting to int. QE notes: Please test non-integer translation

  • Photo projects do not import properly from Elements to Premier Elements 10

    I created two photo projects in Elements 10.  All of the photos were taken from the same two cameras at roughly the same time in the same way.  I put music to each project in Elements.  I spent more than a few hours mating music to the still photos i

  • Does not map (SOAP - JDBC)

    Hi, request message mapping at the pipeline, does not map. please guide me Source MT               Target MT MT_Dotnet_Out 1:1       MT_Dotnet_Material04_In   MATNO                    state1  0..unbounded   MATTEXT MT_Dotnet_Out -->  state1 Test IN M

  • Need AD Account for Only Install and Uninstall the App (exe)

    Hi Team, Anyone can help us for our below query? we are planning to create an account in AD for Application(EXE) installation and un-installation. Important : That ID should not have any other Privilege. is it possible to create in AD ? Thanks and Re