I need the SPICE Model for DS1809 or the component in Multisim. Help mee!

Hey people, I need the SPICE Model for DS1809 (Digital Potentiometer) for Multisim. Does anybody have this?? Or any idea where to get. I searched for, but I coudn't find.
Thank you

Hi,
As you can see in this link the part is longer manufactured and it does not have a replacement.
In terms of functionality, you can try using the component PLL_VIRTUAL in Multisim to replace it in a high level simulation or create a new component of a replacement that you have the SPICE model of.
Let me know if you need any help.
Mahmoud W
National Instruments

Similar Messages

  • I need the SPICE Model for MC145106 or the component in Multisim. Please

    I need the SPICE Model for MC145106 or the component in multiSIM. Please!

    Hi,
    As you can see in this link the part is longer manufactured and it does not have a replacement.
    In terms of functionality, you can try using the component PLL_VIRTUAL in Multisim to replace it in a high level simulation or create a new component of a replacement that you have the SPICE model of.
    Let me know if you need any help.
    Mahmoud W
    National Instruments

  • I need the ISO124 SPICE Model, or the component on Multisim. Can anyone help me?

    People, I need the ISO124 model. Does anybody know how I can find it??
    Thank you soo much! 

    Hi,
    The SPICE model for the ISO124 is not available by the manufacturer. You can try contacting them and make a request for the model, sometimes they provide it upon a customer request.
     Mahmoud W
    National Instruments

  • Error activating CIF model for subcontractor PO w/component requirements

    Hello CIF experts,
    I'm having a problem with the CIF POs and PReqs between ECC and SCM.  If the CIF model is already active, then a subcontractor PO with component requirements is created (the material exists in SCM but the components do not exist in SCM) then the order CIFs successfully to SCM. 
    However, if the CIF model is deactive, then a subcontractor PO with component requirements is created (the material exists in SCM but the components do not exist in SCM), then when the CIF model is activated, it fails.  The error is "Product x for location y in model z does not exist". 
    We do not want to send all components to SCM because we do not plan components and do not want to overload SCM with additional data. 
    Can anyone answer why the order CIFs successfully if the model is active but why it fails when trying to activate the model?
    Much thanks,
    Elizabeth

    Elizabeth
    You have mentioned that you get an error that product X - loc Y does not exist in APO. Does this " product X" refer to the parent material or component material ?  If the product X refers to component material then check your PO integration model and make sure the component is not included in the filter criteria by mistake - CFM5 tcode .
    I understood your scenario and i believe that you must be able to transfer the parent subcontracting PO successfully to APO . Please delete the error queue and check your master data again in APO. Check if the parent material - location exists in APO and then create the integration model and activate it.
    Thanks
    Aparna

  • HT4993 I buy in ebay the new iphone 5S sprint but i need the phone unlock please help me

    I buy in ebay the iphone 5S sprint new but i need the phone unlock help me please

    A Sprint iPhone can only be used with Sprint. It cannot be unlocked, except by Sprint. And they will only unlock it for use outside of the US, and only if you are a Sprint customer. The phone is useless to you if you don't want to use it with Sprint. Return it for a refund.

  • Those the iphone 5s unlock works with LTE or you need an especific model for that

    i need to know if all iphone 5s unlock works with LTE only or you need to get an especific model please?

    If you wish to use Verizon, you must buy a Verizon-specific iPhone, and those are only available in the US. Verizon will not allow phones purchased elsewhere onto their networks.
    Regards.

  • HT5004 i nedd itunes 64 file i don't know what to do with my  iphone4 has all it's data in this computer and i cant sync my iphone now cuz its need the itunes64 file please help me if you can thank you

    hello sir
    my system needs itunes64 file i don't know from where i should get this file cuz my iphone 4 is all the time synced with this computer all the back up are in this computer i dont want to lose it coz i did restore once so i dont have all the data in my phone i have it in itunes please help me with itunes 64
    thank you

    Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with a mirroring tool such as "Carbon Copy Cloner." Preferably both.
    Boot into Recovery mode, launch Disk Utility, and erase the startup volume with the default options. This operation will destroy all data on the volume, so you had be better be sure of your backups. Quit Disk Utility and install OS X. When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups.
    Transfer only "Users" and "Settings" – not "Applications" or "Other files." Don't transfer the Guest account, if it was enabled on the old system. Test. If the problem is still there, the cause is external to the machine, or else you're dealing with a bug or a hardware fault.
    If the problem is resolved, reinstall your third-party software cautiously. Self-contained applications that install into the Applications folder by drag-and-drop or download from the App Store are safe. Anything that comes packaged as an installer or that prompts for an administrator password is suspect, and you must test thoroughly after reinstalling each such item to make sure you haven't restored the problem.

  • HT1414 hello i can't restore my iPhone anyway not by computer or by the setting someone plz help meee

    im not able to restore my iphone by the setting cause it takes forever and i cant restore my iphone by the computer for some reason and i have not jailbroken it can someone plz help meeee

    Hello MohammedFawzi.  I understand you're trying to recover your notebook to factory conditions.  
    If you're unable to perform the recovery the normal way I suggest ordering a set of Recovery Discs directly from HP.  This will not only reinstall the operating system but will also recreate the partitions (including Recovery), install drivers, and most of the software.
    To order the discs you'll need to contact HP Support in your region.  You can visit HP Support Worldwide to locate your region's contact information.  
    I hope this is helpful.  Have an amazing week!  
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Who can help me with spice model thx

    i have download a power mosfet spice model, then creat a new component in multisim
    i copy the model directly into multisim but it does't work
    who can tell me causation, or tell me how can i trun it to multisim model
    thanks very much
    spice model:
    * PSpice Model Editor - Version 9.2.1
    *$
    *DEVICE=IXFN36N100,NMOS
    * IXFN36N100 NMOS model
    * updated using Model Editor release 9.2.1 on 03/06/04 at 13:01
    * The Model Editor is a PSpice product hem.
    .MODEL IXFN36N100 NMOS
    + LEVEL=3
    + L=2.0000E-6
    + W=52
    + KP=1.0353E-6
    + RS=10.000E-3
    + RD=.22254
    + VTO=4.7737
    + RDS=10.000E6
    + TOX=2.0000E-6
    + CGSO=208.54E-12
    + CGDO=7.5038E-12
    + CBD=23.424E-9
    + MJ=1.5000
    + PB=3
    + RG=10.000E-3
    + IS=8.8150E-6
    + N=2.2584
    + RB=1.0000E-9
    + GAMMA=0
    + KAPPA=0
    *$

    Like I told another user I am no expert on model files. I have tried this file and Multisim will not recongnize it. I would recommend the following procedure if you can do it. Go into the component wizard and create a default Mosfet Using the Model Makers.. This will give you the correct syntax for the model file that Multsim can understand. If you know what the parameters mean from Pspice file then you can edit the model after it is created for you in Multisim and plug the numbers into it from the Pspice file. This should create a model that would work in Multisim. This procedure is theoretical on my part and you would have to try it to see if it works for you. It is possible that you don't have the Model Makers depending on your version of Multisim. If that is the case then we will have to try another approach.
    I do not know the meaning of the Pspice parameters (i.e what does the L=XXXXX  and N=XXXXX actual stand for). If you are unable to do this then maybe the NI Team can decipher this for you and post a model file that would work for you.
    I am going to have to study the various parameter on these files to find out their meaning  so I can be of better assistance when it comes to these model files. Right now I just don't have the time since I recently acquired a job that takes up a fair chunk of my days. I will contin ue looking into this as times permits for me.
    Message Edited by lacy on 11-11-2007 07:40 AM
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • Help to find 40107 model for Multisim 9

    Hello!
    can somebody help me to find 40107 Multisim model?
    or even though SPICE model.
    tnx

    I have searched the Web and I can't find any spice models for this component. It looks like you may have to use the datasheet and see if you can create it.  Sometimes the manufacturers just don't make spice models for certain components. I do not know if this is because they can't model it in spice or just do not wish to take the time to make one.
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • How to export spice model from master db

    I can't find a menu option nor DB manager option to select a component and export the spice model. Msim 10.1 full academic version with paid update service.

    Hi there,
    There are a few different ways to extract a component's SPICE model:
    Transfer > Export Netlist: This will export the netlist for your design. So to export the SPICE model for one component only, simply place it down alone and then export the netlist. 
    Component Properties > Model tab: This method involves copying/pasting from the Model tab of the Component Properties dialog
    Open the Database Manager
    Edit the component
    Select the Model tab
    Copy/paste the SPICE model into a text file
    Save with .cir extension
    SPICE Netlist Viewer: In Multisim 11, there is also the ability to save a netlist from the SPICE Netlist Viewer, which displays the netlist live within a pane of Multisim
    Message Edited by NatashaB on 03-05-2010 01:35 PM
    Natasha Baker
    R&D Engineer
    National Instruments
    Join the NI Circuit Design Community
    Follow Multisim on Twitter!

  • Do you need the remote with the dock?

    Hi,
    i'm thinking of buying the Apple Dock, i don't want or need the apple remote, i'm just getting the dock to charge/dock and to TV, when the iPod is pluged in the dock, can i use the the buttons on the the iPod to control the functions like i normally would, or when i put it in the dock does that take over and need the remote? any help much appreciated.
    - Mike

    Jeff,
    You are correct... I was over simplifying some what on the whole DPI vs pixels, etc. I still haven't decided whether I like the 480 x 480 MPEG4 or the 320 x 240 H.264.
    My main point was that the signal is not digital comming out of the iPod, whether using the A/V cables directly or using through the dock. Secondly, that even though the standard definition TV at 480 lines, and using a 480 x 480 pixel video from the iPod, it is still not nearly as crisp on a large screen as on the iPod. The small screen just makes it look finer. Still, there should be no distortion, which would indicate a problem with teh A/V cable he was using.
    As a side, I have my iPod connected to a HDTV. Whether I use 1080i or 720p, the TV must upscale the output from the iPod to fill the the remaining pixels on the TV screen, which ovwerall makes it look worse that on a standard definition TV... even then, there is no distrotion that Mike was having problems with.
    ..and yes, I am a proponent of using the S-Video cable versus composite A/V. As I said, S-Video should provide a better quality picture. However, my own personal experince is that it is only a marginally nocitable improvement, despite what all of the videophile techies procliam.

  • IIs there any way of loading in a MM54C221J component into multisim with out having to use the component wizard?

    Im trying to use a MM54C221J multivibrator in multisim, but it's not in the library.
    Does anyone know if I can get hold of one with having to use the component wizard?
    Many thanks 

    Hello GFear,
    There are several sources for components that aren't native to multisim.
    You can directly contact the manufacturer of the component should they have the multisim model available.
    You can also search the web incase another user has created the component.
    I have searched for the MM54C221J and have not found one available online.
    If you are having trouble using the Component Wizard here is a useful link that breaks down each of the steps.
    To create a component you will need a spice model of the component which you should be able to acquire from the manufacture.
    http://zone.ni.com/devzone/cda/tut/p/id/3173
    I hope this helps.
    Regards,
    Philip
    Applications Engineer
    National Instruments
    UK Branch
    ===If this fixes your problem, mark as solution!===

  • How to get the component name in webdynpro

    Hi all,
            how can i get the name of the webdynpro component. The component is being displayed in the portal. Now i need the component name for this.Can any one suggest of how to get this.
    Regards,
    Kalyan Chakravarthi.M

    Hi ,
    get the object of  IF_WD_COMPONENT , by calling the method wd_get_api( ) of wd_component attribute , then call the method GET_COMPONENT_INFO( ) ,it will return the object of IF_WD_RR_COMPONENT in that call the method GET_NAME( ) .
    Regards
    Yash

  • Need the AD Link cable for SB X-Fi and other models. Anyone have an unneeded one?

    Need the AD Link cable for SB X-Fi and other models. Creative is out of stock & discontinued. Anyone have an unneeded one? TIA.

    This will do it perfectly. http://www.cableyourworld.com/prodde...?prod=CYW-1755
    I once swapped such a cable with the one supplied by Creative because I needed a few extra inches of length. Therefore my recommendation is no gamble, it is a certainty. The only reason I would anticipate failure is if the PIN 1 matching is not performed on both the sound card and I/O bay. I have also seen people turn the cable upside down as well.

Maybe you are looking for

  • Why am I getting black boxes and lines in Facebook chat area?

    I just installed the latest version of Firefox as well as the latest version of my graphics card drivers, and Adobe Flash Player. When I open Facebook, I get black boxes and lines all over the left side of the screen where my chat contacts are. I am

  • Want to check page is displayed on browser or not ?

    In my code: in every half an hour it opens my browser and access a website(just like www.yahoo.com). I want, in any case if page not displayed it make a file and saved it on my pc. How can i check the page is displayed or not ?

  • Digitizer tablet for Whiteboarding in Adobe Connect

    Hello, We have a number of users at my company who are interested in a stylus/tablet for use with the whiteboard features in connect, apparently they have tried the bamboo on their own and they were less than thrilled with the performance. Was wonder

  • Qualified list item based on two columns

    - fact table inludes following columns key1 key2 measure1 In segment designer, update counts: the query must counts two columns "key1 and key2" that key1 and key2 together must be distinct.

  • Hex string to 2D picture control

    Hi, I'm trying to get a screen capture from an HP8563EC spectrum analyzer with a GPIB-USB-HS interface. I was able to get the data from the spectrum analyzer but I can't figure out how to rebuilt the screenshot from the downloaded data (string of hex