I need to add a new 2811 MGCP

I have a clouster 4.1.2 and need to add a new office (external)which has a independient numeric plan.
Some body can refresh me the rigth flow to configurate, becouse I was think:
1.- Add Gateway to CCM clouster
2.- Add a new translation patern to offices phones
3.- Route patterns to external office
4.- Route patterns to international and long distance calls
5.- Superviability
bud I don't know if I need a route group, a route list or create a zone
Thank

IF you point a route pattern to the gateway directly, you cannot add that gateway into a route group. You will have to
a. either delete all route patterns that are pointed to the gateway in question
b. create route group, add gateway to route group
c. add route group to route list
d. add route patterns and point them to the route list.
OR
a. add a dummy h323 gateway.
b. repoint all route patterns to this h323 gateway. (temporary)
c. add a route group and add the mgcp gateway in question to the route group, and add route group to a route list.
d. repoint all route patterns to the route list
e. delete h323 gateway.
On the issue with calls not going out, I would check
a. sh isdn status
b. see if gateway is registered to callmanager
c. sh ccm-manager
d. debug isdn q931 - to see whats the cause code for calls not going out.
e. if route patterns have any partitions configured, then that partition need to be accessible in the CSS configured on the phone.
HTH
Sankar
PS: please remember to rate posts!

Similar Messages

The Web application at could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application

Hi,
I have created on windows service to fetch sharepoint list ad update the list items.
when i run this service in sharepoint server(where the sharepoint site is hosted),it is working fine. If i run the same service in another machine(sharepoint installed in this machine also). it is giving the below error
The Web application at [URL] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
Code snippet
SPSite sharepointSite = null;
            SPWeb rootWeb = null;
            try
                //SPList current = null, previous = null;
                string colmId = ConfigurationManager.AppSettings[ID_COLM];
                List<TaskEntity> list = new List<TaskEntity>();
                sharepointSite = new SPSite(URL);
                rootWeb = sharepointSite.OpenWeb();
                SPList current = rootWeb.Lists[ConfigurationManager.AppSettings[OMEGA_REGISTRATION_LIST]];
                WriteEventLog("current" + current.Items.Count.ToString());
            catch (Exception ex)
                ExceptionMethod(ex);
            finally
                sharepointSite = null;
                rootWeb = null;
I have pointed .net framework to 3.5 version and target palform as Any CPU. Please suggest me

Hi mallela1,
I also had similar issue couple of months back when I was trying to access a remote URL from a Windows service when the site does not exists in the server where service resides.
You cannot access a remote url (even though it is SharePoint server and also in same network ) from server object model.
SPSite can look in the current server only. here what is happening is SPSite will look for this in the current server DB and it is not finding this errror.
So please dont use ServerObject model for accessing remote sites. You can use Client Object model for the code /requirement you have stated above.
I wasted lot of time in finding a work around to make to work. It did not. So look for other options.
Regards,
Nandini

Need to add a new release of the segment and maintain that version

Hi All,
I want to add one field in the Z segment type using WE31.But i am getting the error message as
'Current segment definition <segment name> can no longer be changed and The current segment definition
is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
The current segment defenition which i am trying to change got the SAP release of 4.6C. But the system has upgraded to Ecc6 recently.
I tried going to the edit menu and cancel the release, but still it is not allowing.
Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
I suggested by that
*You can only edit segments in the current release. You will need to add a new release of the segment and maintain that version with changes. *
If this is right then
How to do this settings
regards,

'Add version' use this option - a new version will be created in the current release.
then add your field to that and relase it again.
Regds,

Need to add a new column in the extended VO

Hi
I have an urgent requirement like i need to add a new column in one of the extended VO.Can anyone give the procedure to do that..
Please do the needful.
Thanks
Preeti

Hi Gaurav,
For example...
Consider seeded VO is XXXVO and we added a new column to the XXX by extending XXCHRXXXVO(extended VO).and the we gone thru the full substitution process..
Now new requirement came as add a new column to extended VO - XXCHRXXXVO.Can you please tell in this example scenario? It will be good if you provide the inputs...
Thanks
Preeti

Need to add a new page 1 to a completed form

I have a 4 page form that was completed. Now I need to add a new page 1 with information in text fields. When I insert a page it is inserted as the last page. I then move the page in the Hierarchy to the correct position and get 2 blank pages. When I try to delete the first one, I'm told there is no subform so the page cannot be deleted and the command is ended.
Thanks,
MDawn

Hi,
    I think I found the issue with the form..you can confirm..
    For the page/ Subform "GuestSysAccessReq" you selected "Following Previous", for "Place" under Pagination tab. And rest of the Pages/ subforms you selected "Top of Next Page" as a value for "Place". And again at the end for "guidelines" page you selected "Top of Page -> Page1" as a value for "Place".
   I corrected all the pages/ subforms to have the same value for the "Place" field as "Top of Page -> Page1" and then I added a new page and I could able to move the page to be the first page in the heirarchy. It did not add an empty page.. I am attaching the modified frm in the forum for your reference..
   Let me know if you have any issues.
Thanks
Srini

Need to add a new page in the SAP Script as last page

Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
I used NEW-PAGE END in the main window but it is not working and also I trired with CONTROL_FORM this also not working.
Thanks,
Ravi.

Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
Create the text element in the main wondow of your form
/E           ENDPAGE
/:           NEW-PAGE END
and call the element from your print program by using write_form, where you want the END page in your print.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'ENDPAGE'
    EXCEPTIONS
      element = 1
      window = 2.
Thanks,
Ravi.

I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this. Can anyone help?

I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this. Can anyone help?

Jennymbell, never fear help is here!
Have you tried contacting your IT department for assistance? You can visit http://bit.ly/QECbGh for steps on how to enterprise activation.
Keep me posted if you need further assistance.
John B
Follow us on Twitter @VZWSupport

I need to add a new node to RAC Oracle 10g R2

I need to add a new node to RAC Oracle 10g R2.
what is the best mode.
cloning or step by step?
SO: Solaris 64bit
Message was edited by:
ACS

Hi All,
I get the following error eventhough I have followed the instruction for Solaris R2. The instruction is enclosed. Please Advise! Thanks.
/app/cluvfy/runcluvfy.sh stage -post hwos -n nod1 -verbose
Result: User equivalence check failed for user "oracle".
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Post-check for hardware and operating system setup was unsuccessful on all the nodes.
=========================
1. Log in as the oracle user.
2. If necessary, create the .sshdirectory in the oracle user’s home directory and
set the correct permissions on it:
$ mkdir ~/.ssh
$ chmod 700 ~/.ssh
3. Enter the following commands to generate an RSA key for version 2 of the SSH
protocol:
$ /usr/bin/ssh-keygen -t rsa
At the prompts:
¦ Accept the default location for the key file.
¦ Enter and confirm a pass phrase that is different from the oracle user’s
password.
This command writes the public key to the ~/.ssh/id_rsa.pub file and the
private key to the ~/.ssh/id_rsafile. Never distribute the private key to anyone.
4. Enter the following commands to generate a DSA key for version 2 of the SSH
protocol:
$ /usr/bin/ssh-keygen -t dsa
At the prompts:
¦ Accept the default location for the key file
Pre-Installation Tasks 2-11
Creating Required Operating System Groups and User
¦ Enter and confirm a pass phrase that is different from the oracle user’s
password
This command writes the public key to the ~/.ssh/id_dsa.pub file and the
private key to the ~/.ssh/id_dsa file. Never distribute the private key to
anyone.
Add keys to an authorized key file: Complete the following steps:
1. On the local node, determine if you have an authorized key file
(~/.ssh/authorized_keys). If the authorized key file already exists, then
proceed to step 2. Otherwise, enter the following commands:
$ touch ~/.ssh/authorized_keys
$ cd ~/.ssh
$ ls
You should see the id_dsa.pub and id_rsa.pubkeys that you have created.
2. Using SSH, copy the contents of the ~/.ssh/id_rsa.puband
~/.ssh/id_dsa.pubfiles to the file ~/.ssh/authorized_keys, and provide
the Oracle user password as prompted. This process is illustrated in the following
syntax example with a two-node cluster, with nodes node1 and node2, where the
Oracle user path is /home/oracle:
[oracle@node1 .ssh]$ ssh node1 cat /home/oracle/.ssh/id_rsa.pub >>
authorized_keys
oracle@node1’s password:
[oracle@node1 .ssh]$ ssh node1 cat /home/oracle/.ssh/id_dsa.pub >>
authorized_keys
oracle@node1 .ssh$ ssh node2 cat /home/oracle/.ssh/id_rsa.pub >>
authorized_keys
oracle@node2’s password:
[oracle@node1 .ssh$ ssh node2 cat /home/oracle/.ssh/id_dsa.pub
authorized_keysoracle@node2’s password:
Note: Repeat this process for each node in the cluster

I need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

i need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

Hello,
the way is written there Activation & deactivation help >>> (see there only to understand the procedure) Common activation problems >>> "Activation limit reached for [product]. This serial number has already been activated on 2 computers." "Maximum activations exceeded."
>>> How to deactivate or sign out >>> A single license for Adobe software lets you install the applications on two computers—for example, at home and at the office. However, you can use the software on only one computer at any given time.
If you want to install the software on a third computer, deactivate the software on the computer on which you will no longer use the software. Then, activate the software on the new computer.
Hans-Günter

Need to add a new field to XD01 under company code data tab

Hi,
I need to add a new field under Company code data of XD01 under Account Management tab.
I came to know two BADI's CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS can be used for this. But for these BADIs we need to create a sub screen.But for my requirement I need not use a subscreen just to add a field.
Please let me know how to do this?

Hello Pavan,
Do you have any solution for this issue? I only can creat a new tab but hi prefer as you, creat a field Company code data of XD01 under Account Management tab.
I read that is not possible, this is true?
Best Regards,
Eduardo Paiva

Need to add 2 new columns to the existing table control of C223 transaction

Hi ABAP Gurus,
I have to do a screen enhancement for transaction C223.
Below is the requirement:
need to add 2 new columns to the existing table control of C223 transaction.
there is no customer exits, screen exit or user exit present for this transaction C223, i have found one enhancement spot for this transaction.
i dont have any idea how to do this in standard transaction C223, the table control in C223 saves the data to MKAL table and the table control uses the structure MKAL_EXPAND in the screen program.
i have created an append structure for the 2 fields to the standard table MKAL.
Can anyone please suggest me how this can be done in standard screen C223, will the enhancement spot can be used to do this....
please sugest...
Thanks & Regards

Hi Santosh,
Thanks for the reply. I have looked into this Enhancement Spot CPFX_SCREEN_SET , inside this there is only one method INPUT_DISABLED having below parameters
IM_MKAL     Importing     Type     MKAL                                                                                Production Version
EX_MSGID     Exporting     Type     SY-MSGID                                                                                Messages, Message
EX_MSGTY     Exporting     Type     SY-MSGTY                                                                                Messages, Message
EX_MSGNO     Exporting     Type     SY-MSGNO                                                                                Messages, Message
EX_MSGV1     Exporting     Type     SY-MSGV1                                                                                Messages, Message
EX_MSGV2     Exporting     Type     SY-MSGV2                                                                                Messages, Message
EX_MSGV3     Exporting     Type     SY-MSGV3                                                                                Messages, Message
EX_MSGV4     Exporting     Type     SY-MSGV4                                                                                Messages, Message
EX_INPUT_DISABLE     Exporting     Type     CHAR1                                                                                Display Only if X Was Set
the BADI definition present here is a SAP internal so we cant implement the BADI , but we can created a enhancement spot implementation for this. as per my understanding on this the enhancement spot is only for making the table control fields display / change . i dont think this can be used to add two new coloumns to C223 table control.
I am not sure thats why seeking your help/valuable sugestion on this.
Please provide your sugestion on this , so that i can come to conclusion on this issue.
Thanks & Regards
Siddhartha Mishra

I need to add my new ipod to itunes. it will only show the old dead ipod. i want to keep the music, but get rid of the info of the old dead ipod and add my new one and its info. please help.

Hello,
I need to add my new ipod to itunes.
itunes will only show the old, dead ipod that my niece had given me secondhand.
I just got a new one and want to put in it's serial number, etc. but keep the music.
Please help, I've been going around in circles online for hours. I don't want to merely change the name of the old ipod, which is the only info I can find.
Thanks.

"In addition, I would like to get all of the music files that are already on my ipod on to my new computer"
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
However it appears that no playlists or any other info such as ratings/last played etc will transfer.
If this is important to you, you may want to use other options.
There's Yamipod. This is a free program that transfers music and playlists etc from iPod to iTunes.
Once the music from your iPod is in your new iTunes library, you can go about adding new music as you did previously.

Need to add a new mail account but option is greyed out

Hi, I need to add a new mail account (I already have 2 setup), but when I go to Settings > Mail, Contacts, Calendars, the "Add Account" field is not available for me to click on.

Fixed it... was a Restrcition setting that I obviously turned on after I had set the other two accounts up... Doh

Need to add a new row at the end of the table

Experts,
working jdev 11.1.1.3.0
i am adding row programetically, my requirement need to add the row at after last row.
i tried different ways.
Row newLastRow = getPWBBidLaneVO().last();
int lastRowIndex = getPWBBidLaneVO().getRangeIndexOf(newLastRow);
getPWBBidLaneVO().insertRowAtRangeIndex(lastRowIndex - 1,
laneRow);
this is giving --- java.lang.ArrayIndexOutOfBoundsException: 0
and
http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html --- its giving index out of bound because vo.getRangeSize() is 25. We set this value at vo for performance improment suggestions.
is there a way to add a new row at the end of the table?

Add this to the view row impl class
       public void insertRow(Row row) {
           //go to the end of Rowset if it has rows
           Row lastRow = this.last();
           if (lastRow !=null){
                //insert new row at the end and make it current
               int indx = this.getRangeIndexOf(lastRow)+1;
               this.insertRowAtRangeIndex(indx,row);
               this.setCurrentRow(row);
           }else { // empty Rowset
           super.insertRow(row);
           }

Need to Add a new Field to FamAddPG

Hi All,
We are trying to add a new field Start Reason Id field in to a view object FamilyMembersVO.
This field should be able to be entered and updated in the FamAddPG (oracle/apps/ben/selfservice/enrollment/webui/FamAddPG) .
We were able to identify VO and extend the VO and were able to personalize the page and add the field.
However there is no related Entity Object (EO).
When we try to enter the field it is erroring, we try to modify the related controller (CO) and Application module (AM), however didn’t work.
So our question in order to add a field to a VO, when there is no related EO what should we do.?.
What are the objects we need to extend and what all objects we need to modify? i.e VO, EO AM etc.
Any pointers help would be much appreciated.
Thanks In Advance!!
Best Regards,
Kiran Ravuri

Hi Kiran,
You didn't mention what error you got after extending the VO, there may be different errors, different reasons and hence different solutions.
Second Insert/Update/Delete happens in AM --> AM just handles the transaction but insert/Update/Delete happens through code written in AM is not true.
If VO is EO based then we enter the data on page and submit the page then this data will posted to EO and and on commit it will be saved in database automatically.
Please specify the error, then we will be able to suggest you something.
Regards,
Reetesh Sharma

I need to add a new 2811 MGCP

Similar Messages

Maybe you are looking for