I need to add a new report to the application that is done using visual studio and SSRS and SQL Server 2008

I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.

Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks.

Similar Messages

Need to add a new release of the segment and maintain that version

Hi All,
I want to add one field in the Z segment type using WE31.But i am getting the error message as
'Current segment definition <segment name> can no longer be changed and The current segment definition
is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
The current segment defenition which i am trying to change got the SAP release of 4.6C. But the system has upgraded to Ecc6 recently.
I tried going to the edit menu and cancel the release, but still it is not allowing.
Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
I suggested by that
*You can only edit segments in the current release. You will need to add a new release of the segment and maintain that version with changes. *
If this is right then
How to do this settings
regards,

'Add version' use this option - a new version will be created in the current release.
then add your field to that and relase it again.
Regds,

Need to add a new page in the SAP Script as last page

Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
I used NEW-PAGE END in the main window but it is not working and also I trired with CONTROL_FORM this also not working.
Thanks,
Ravi.

Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
Create the text element in the main wondow of your form
/E           ENDPAGE
/:           NEW-PAGE END
and call the element from your print program by using write_form, where you want the END page in your print.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'ENDPAGE'
    EXCEPTIONS
      element = 1
      window = 2.
Thanks,
Ravi.

Need to add 2 new columns to the existing table control of C223 transaction

Hi ABAP Gurus,
I have to do a screen enhancement for transaction C223.
Below is the requirement:
need to add 2 new columns to the existing table control of C223 transaction.
there is no customer exits, screen exit or user exit present for this transaction C223, i have found one enhancement spot for this transaction.
i dont have any idea how to do this in standard transaction C223, the table control in C223 saves the data to MKAL table and the table control uses the structure MKAL_EXPAND in the screen program.
i have created an append structure for the 2 fields to the standard table MKAL.
Can anyone please suggest me how this can be done in standard screen C223, will the enhancement spot can be used to do this....
please sugest...
Thanks & Regards

Hi Santosh,
Thanks for the reply. I have looked into this Enhancement Spot CPFX_SCREEN_SET , inside this there is only one method INPUT_DISABLED having below parameters
IM_MKAL     Importing     Type     MKAL                                                                                Production Version
EX_MSGID     Exporting     Type     SY-MSGID                                                                                Messages, Message
EX_MSGTY     Exporting     Type     SY-MSGTY                                                                                Messages, Message
EX_MSGNO     Exporting     Type     SY-MSGNO                                                                                Messages, Message
EX_MSGV1     Exporting     Type     SY-MSGV1                                                                                Messages, Message
EX_MSGV2     Exporting     Type     SY-MSGV2                                                                                Messages, Message
EX_MSGV3     Exporting     Type     SY-MSGV3                                                                                Messages, Message
EX_MSGV4     Exporting     Type     SY-MSGV4                                                                                Messages, Message
EX_INPUT_DISABLE     Exporting     Type     CHAR1                                                                                Display Only if X Was Set
the BADI definition present here is a SAP internal so we cant implement the BADI , but we can created a enhancement spot implementation for this. as per my understanding on this the enhancement spot is only for making the table control fields display / change . i dont think this can be used to add two new coloumns to C223 table control.
I am not sure thats why seeking your help/valuable sugestion on this.
Please provide your sugestion on this , so that i can come to conclusion on this issue.
Thanks & Regards
Siddhartha Mishra

Need to add a new row at the end of the table

Experts,
working jdev 11.1.1.3.0
i am adding row programetically, my requirement need to add the row at after last row.
i tried different ways.
Row newLastRow = getPWBBidLaneVO().last();
int lastRowIndex = getPWBBidLaneVO().getRangeIndexOf(newLastRow);
getPWBBidLaneVO().insertRowAtRangeIndex(lastRowIndex - 1,
laneRow);
this is giving --- java.lang.ArrayIndexOutOfBoundsException: 0
and
http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html --- its giving index out of bound because vo.getRangeSize() is 25. We set this value at vo for performance improment suggestions.
is there a way to add a new row at the end of the table?

Add this to the view row impl class
       public void insertRow(Row row) {
           //go to the end of Rowset if it has rows
           Row lastRow = this.last();
           if (lastRow !=null){
                //insert new row at the end and make it current
               int indx = this.getRangeIndexOf(lastRow)+1;
               this.insertRowAtRangeIndex(indx,row);
               this.setCurrentRow(row);
           }else { // empty Rowset
           super.insertRow(row);
           }

Need to add a new column in the extended VO

Hi
I have an urgent requirement like i need to add a new column in one of the extended VO.Can anyone give the procedure to do that..
Please do the needful.
Thanks
Preeti

Hi Gaurav,
For example...
Consider seeded VO is XXXVO and we added a new column to the XXX by extending XXCHRXXXVO(extended VO).and the we gone thru the full substitution process..
Now new requirement came as add a new column to extended VO - XXCHRXXXVO.Can you please tell in this example scenario? It will be good if you provide the inputs...
Thanks
Preeti

Need to add a new field to the Schema for MDM Syndicator

We are running MDM 5.5 SP6.
We have a requirement to add a new field and syndicate the new field to the our Procurement System.
I was able to add the new field to the repository and schema in SAP MDM Console. However, when I went into the Syndicator to map the new field (which I do see) to the new Schema field, I don't see the new field to map in the Schema.
How can I change the existing syndication jobs (11 of them) to use the new Schema? Or do I have to recreate all of them?
Thank you in advance!!!

Hi Janynne,
I hope you have modify the Syndication XSD(add new field) and then load it in XML Schema table of MDM Console, right ?
If you have done it, now open MDM Syndicator>Go to File>Open, select the required Remote system and Available map.
Now your existing map will be loaded which has not the required added field, Now again, go to file-->Export.
Give file name and save this syndication map on your Desktop. Once you have done this.
Go to File>New>Select respective remote system and Type as XML Schema if you have loaded this XSD in Console else select Type as XML Schema file and select the modified XSD (added new field XSD) from Desktop. Once it is loaded, import the existing syndication map(which you have exported as said above) which should have all the fields mapped, now in target side you will have here new added field too, map it with required source field in Item Mapping and then go to file>Save as>select the required Remote system and give new map name. Use this map for exporting files for future reference.
Also, if your are using Port Concept, you need to change the Properties Map and XML Schema in Port of MDM Console.
Regards,
Mandeep Saini

How do I add a new panel to the accordion widget in-between two others (NOT at the end)

In the accordion widget, the + button at the bottom adds a new panel to the end. I have a series of panels that are in alpha-sort and need to add a new panel in the middle... I can't figure out how to do it without re-doing the whole thing. is there a way to do this?

Gah! Thanks Mac.
That was the first thing I tried! I must not have had the right level selected. It's been driving me batty, but I've got it now.

How do you add a "news ticker" to the bottom of a movie for Apple TV?

Made a movie from keynote, now I need to add a "news ticker" to the bottom of the movie ... How? Using Apple TV to show the movie ...

use iMovie with text crawl effect

SQL Server reporting services error "URl has already been reserved" while doing upgrade from SQL server 2008 R2 to SQL server 2012

"URl has already been reserved".
Reporting services for port 80 and 443 works fine both for reports and reportingserver on SQL server 2008 R2. But when I try to upgrade from SQL server 2008 R2 to 2012 this error pops up. How to make sure before upgrading regarding reporting services that
URL reserves and SSL are fine or how to fix reporting services are upgrade like repair install.
Thanks

Hi yashmitl,
In your case, please running the following command to check the current URL reservations on http.sys.
netsh http show urlacl
Then, please delete the URL reservation by executing the following command try to resolve the issue.
netsh http delete urlacl <url>
There is a similar issue, you can refer to it.
http://social.technet.microsoft.com/Forums/en-US/d5204dd3-e26d-4592-8ef0-a94005fc46a5/the-url-has-already-been-reserved?forum=sqlreportingservices
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to add two new paramater to the Account Analysis report

Hi All,
I was working in Oracle Apps R12.1.2.
Now i need to customize Account analysis report.
Now i need to add two new parameter namely Party_name and party_site_name. So now instead of creating new parameter i have used the P_Custom_parameters namely 1 & 2.
I have searched and found that they have used in this party_name concept only in this part only
p_party_columns :=
',CASE
WHEN ael.party_type_code = ''S'' THEN
(SELECT aps.segment1
||''|''||aps.vendor_name
||''|''||hzp.jgzz_fiscal_code
||''|''||hzp.tax_reference
||''|''||hps.party_site_number
||''|''||hps.party_site_name
||''|''||NULL
FROM ap_suppliers aps
,ap_supplier_sites_all apss
,hz_parties hzp
,hz_party_sites hps
,xla_ae_lines ael2
WHERE aps.vendor_id = ael2.party_id
AND hzp.party_id = aps.party_id
AND apss.vendor_site_id(+) = ael2.party_site_id
AND hps.party_site_id(+) = apss.party_site_id
AND ael2.application_id = ael.application_id
AND ael2.ae_header_id = ael.ae_header_id
AND ael2.ae_line_num = ael.ae_line_num
          AND aps.vendor_name = :P_CUSTOM_PARAMETER_1
          AND hps.party_site_name = :P_CUSTOM_PARAMETER_2)
WHEN ( ael.party_type_code = ''C'' AND ael.party_id is not null ) THEN
(SELECT hca.account_number
||''|''||hzp.party_name
||''|''||hzp.jgzz_fiscal_code
||''|''||hzp.tax_reference
||''|''||hps.party_site_number
||''|''||hps.party_site_name
||''|''||hzcu.tax_reference
FROM hz_cust_accounts hca
,hz_cust_acct_sites_all hcas
,hz_cust_site_uses_all hzcu
,hz_parties hzp
,hz_party_sites hps
,xla_ae_lines ael2
WHERE hca.cust_account_id = ael2.party_id
AND hzp.party_id = hca.party_id
AND hzcu.site_use_id(+) = ael2.party_site_id
AND hcas.cust_acct_site_id(+) = hzcu.cust_acct_site_id
AND hps.party_site_id(+) = hcas.party_site_id
AND ael2.application_id = ael.application_id
AND ael2.ae_header_id = ael.ae_header_id
AND ael2.ae_line_num = ael.ae_line_num
          AND hzp.party_name = :P_CUSTOM_PARAMETER_1
          AND hps.party_site_name = :P_CUSTOM_PARAMETER_2)
ELSE
NULL
END ';
But now when i ran with a specific parameter its running for all party name.
Can any one pls guide me how to achieve this
Thanks & Regards
Srikkanth
Edited by: Srikkanth.M on Oct 20, 2011 5:23 PM

solved

The Web application at could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application

Hi,
I have created on windows service to fetch sharepoint list ad update the list items.
when i run this service in sharepoint server(where the sharepoint site is hosted),it is working fine. If i run the same service in another machine(sharepoint installed in this machine also). it is giving the below error
The Web application at [URL] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
Code snippet
SPSite sharepointSite = null;
            SPWeb rootWeb = null;
            try
                //SPList current = null, previous = null;
                string colmId = ConfigurationManager.AppSettings[ID_COLM];
                List<TaskEntity> list = new List<TaskEntity>();
                sharepointSite = new SPSite(URL);
                rootWeb = sharepointSite.OpenWeb();
                SPList current = rootWeb.Lists[ConfigurationManager.AppSettings[OMEGA_REGISTRATION_LIST]];
                WriteEventLog("current" + current.Items.Count.ToString());
            catch (Exception ex)
                ExceptionMethod(ex);
            finally
                sharepointSite = null;
                rootWeb = null;
I have pointed .net framework to 3.5 version and target palform as Any CPU. Please suggest me

Hi mallela1,
I also had similar issue couple of months back when I was trying to access a remote URL from a Windows service when the site does not exists in the server where service resides.
You cannot access a remote url (even though it is SharePoint server and also in same network ) from server object model.
SPSite can look in the current server only. here what is happening is SPSite will look for this in the current server DB and it is not finding this errror.
So please dont use ServerObject model for accessing remote sites. You can use Client Object model for the code /requirement you have stated above.
I wasted lot of time in finding a work around to make to work. It did not. So look for other options.
Regards,
Nandini

Need to add a new page 1 to a completed form

I have a 4 page form that was completed. Now I need to add a new page 1 with information in text fields. When I insert a page it is inserted as the last page. I then move the page in the Hierarchy to the correct position and get 2 blank pages. When I try to delete the first one, I'm told there is no subform so the page cannot be deleted and the command is ended.
Thanks,
MDawn

Hi,
    I think I found the issue with the form..you can confirm..
    For the page/ Subform "GuestSysAccessReq" you selected "Following Previous", for "Place" under Pagination tab. And rest of the Pages/ subforms you selected "Top of Next Page" as a value for "Place". And again at the end for "guidelines" page you selected "Top of Page -> Page1" as a value for "Place".
   I corrected all the pages/ subforms to have the same value for the "Place" field as "Top of Page -> Page1" and then I added a new page and I could able to move the page to be the first page in the heirarchy. It did not add an empty page.. I am attaching the modified frm in the forum for your reference..
   Let me know if you have any issues.
Thanks
Srini

I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this. Can anyone help?

I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this. Can anyone help?

Jennymbell, never fear help is here!
Have you tried contacting your IT department for assistance? You can visit http://bit.ly/QECbGh for steps on how to enterprise activation.
Keep me posted if you need further assistance.
John B
Follow us on Twitter @VZWSupport

I need to add a new 2811 MGCP

I have a clouster 4.1.2 and need to add a new office (external)which has a independient numeric plan.
Some body can refresh me the rigth flow to configurate, becouse I was think:
1.- Add Gateway to CCM clouster
2.- Add a new translation patern to offices phones
3.- Route patterns to external office
4.- Route patterns to international and long distance calls
5.- Superviability
bud I don't know if I need a route group, a route list or create a zone
Thank

IF you point a route pattern to the gateway directly, you cannot add that gateway into a route group. You will have to
a. either delete all route patterns that are pointed to the gateway in question
b. create route group, add gateway to route group
c. add route group to route list
d. add route patterns and point them to the route list.
OR
a. add a dummy h323 gateway.
b. repoint all route patterns to this h323 gateway. (temporary)
c. add a route group and add the mgcp gateway in question to the route group, and add route group to a route list.
d. repoint all route patterns to the route list
e. delete h323 gateway.
On the issue with calls not going out, I would check
a. sh isdn status
b. see if gateway is registered to callmanager
c. sh ccm-manager
d. debug isdn q931 - to see whats the cause code for calls not going out.
e. if route patterns have any partitions configured, then that partition need to be accessible in the CSS configured on the phone.
HTH
Sankar
PS: please remember to rate posts!

I need to add a new report to the application that is done using visual studio and SSRS and SQL Server 2008

Similar Messages

Maybe you are looking for