I need to add and delete individuals.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/867558]]</blockquote>
I need to add and delete individuals. How do I do that?

Individual what?

Similar Messages

Add and Delete a row in table

Hi Expert,
In SAP interactive form OFFLINE Scneario.
I have a deep structure. In which i am using other structures like kna1, knb1, knvv.
Now in KNVV is again a deep structure in which i have a table type.
Now a draged and droped this table type to my layout so i got a table.
I Need to have two buttons ADD and Delete, To add and delete a row in table repectvily.
I saw other threads also but get not do it.
My table type attribute's name in KNVV structure is VLACT.
I write following code on click action of ADD button
data.#subform[0].Button1::click: - (FormCalc, client) -
VLACT.row.instanceManager.addInstance(1);
xfa.form.recalculate(1);
but it shows error msg
accessor "VLACT.row.instanceManager.addInstance(1);"
is unknown.
Also i am not able to see tabel itself wich i draged and droped. Only two buttons are there.
Plz help
Thanks ? Regards,
Arvind

Hi Otto,
This is the code i am using to add new row.
Also all the settings in form are correct like "Repeat row for each data item" etc.
I want to have at most 7 rows.
var nTableLength = Table1.nodes.length;
var nNumRow = 0;
    for (var nCount = 0; nCount < nTableLength; nCount ++)
      if ((Table1.nodes.item(nCount).className == "subform") & (Table1.nodes.item(nCount).name !== "HeaderRow"))
       { nNumRow = nNumRow + 1; }
           if (nNumRow == 7)
           { xfa.host.messageBox("The maximum allowable number of rows is 7. You cannot add any more rows.", "Warning", 3); }
       else {
              Table1.Row1.instanceManager.addInstance(1);
              xfa.form.recalculate(1);
               xfa.host.messageBox("row added" );
I get the msg form the statment        xfa.host.messageBox("row added" );
But i can not see the newly added row
Plz help
Thansks & Regards,
Arvind

Fitbit does not sync with healthvault no matter how many times I add and delete it

My healthvault never shows any information synced from fitbit.com, I have the scales and a tracker and no matter how many times I add and delete it through the fitbit share healthvault page but it never ever syncs over night. I have left is weeks and
still nothing in HV.
I am starting to wonder if HV supports fitbit? Any help would really be appreciated, this is driving me insane.
Do I need to create a new account? is my account just broken?

Hi,
I have spoken with FitBit about this issue and they provided the following:
Since you have already linked and unlinked your account and still having issues please contact Fitbit Support (http://help.fitbit.com/?cu=1)
for further assistance."
Addititionally when you contact FitBit can you please let them know that you have already contacted HealthVault.
Thanks
Tomas
MS HealthVault Support

Once I publish my site with a web hosting site can I still edit and update the site in Muse? Can I add and delete pages to the site?

Very confused about publishing the Muse site. It sound like I won't be able to edit a lot of it once it is published. I need to be able to add and delete pages and edit the content on existing pages over time. It is saying that the temporary version of the site will delete after 30 days. Am I misunderstanding?

It sounds like you didn't upload the css files folder that Muse generates. There is also scripts file, assets file/images file that Muse generates

Problem with Read-only user being able to add and delete files and folders.

The setup:
Computer #1
iMac (intel) running 10.5.5
File sharing ON
Sharing folder on external USB drive called 'iTunes' (but not the drive volume itself)
Users:
- Everyone = Read Only
- Admin(me) = Read/write
- UserA = Read Only (with account PW and username identical to local login for computer below)
Computer #2
UserA's iBook G4 running 10.4.11
When I go to finder>network>iMac>connect it prompts me to login which I do and then select 'iTunes' folder which is visible and mounts successfully. I can see all files, access them all. Life seems great. Then I discover that I can also modify and delete files from the iBook, and create and delete directories.
I'm new to networking and although I've setup and managed minimal networking tasks on PCs before, this is my first foray into the Mac networking world. Please help.
What am I doing wrong? What haven't I set?
Thanks in advance.

Sorry, I should have clarified this in the first email.
When I login from the iBook, I am logging in under a read-only user (not as myself, who is admin on the iMac). The user on the iBook has only been given read-only permissions on the iMac yet is able to add and delete files.
This read-only login/PW however, is the admin account on the iBook, but that shouldn't allow this person to write on the iMac so far as I understand things...right?

How do I delete music from my iPhone and what is the best way to add and delete music?

How do I delete music from my iPhone and what is the best was to add and delete music to the iPhone?

See Here...
iPhone User Guide
and here
http://www.apple.com/support/iphone/syncing/

How to add and delete content on device from iTunes

I cannot find the way to add and delete content on my devices from the new iTunes. I don't understand why they changed the way it worked without any tutorials or hints at how to use the new iTunes app. I can see my device, I can see that music is on there, but I cannot unselect songs or content to get rid of it. Also, my apps do not show up on the apps list, I can see the screens with the apps on them and can delete them from that but the list is not working. I am using Yosemite and iTunes 12.01

If you select your device in iTunes then on the left-hand side of iTunes you should see a Settings heading with categories below it which you can use to select what to sync from your iTunes library to the device, and below that an On My Device heading with categories below it listing what is on the device.
For the Apps tab, the listbox of apps on my Mac's iTunes doesn't always populate until I've scrolled up/down the window. If yours doesn't populate then you have your apps downloaded and stored in your Mac's iTunes library - the listbox shows what you have in your computer iTunes library, if your library is empty then the listbox will remain empty.

How do I add and delete pages to a pdf document?

How do I add and delete pages to a pdf document?

Hi Paul,
Adobe Acrobat has the features to add/delete/extract/crop/insert pages to your PDF files and are much more features.
Adobe Reader has a very limited features for editing to PDF files.
Now you can subscribe to Acrobat Plus and see more information at https://www.acrobat.com/acrobatplus/en/home.html
Or you can download Acrobat XI Pro for trial version from www.adobe.com.
thank you.
Hisami

How do i add and delete photos from the screensaver preference window

How do i add and delete photos from the screensaver preference window?

Hello, sassy4sue.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when creating or editing iPhoto albums that you are using as a screen saver.
Mac Basics: Using Screen Saver when your screen is idle
http://support.apple.com/kb/ht2485
Cheers,
Jason H.

Examples of Add and Delete buttons in Forms

Hello, I have group project and we are having a hard time finding examples of how to add and delete records.
We have tried for the add:
INSERT INTO order_line VALUES
(:orders.o_id,
:order_line.inv_id,
:order_line.ol_quantity);
COMMIT;
And this for the Delete:
DELETE FROM order_line WHERE
o_id = :orders.o_id
AND inv_id = :order_line.inv_id;
COMMIT:
We are just looking for a generic example of how the code should look. Please ignore any errors I may have typed I copied it from a print off.

Please ask this question in the Forms discussion area instead of the Database discussion area.
Thanks.

How do I add and delete calendars to my iPod Touch 4

I'm not meaning specific events here. I want to delete the ENTIRE calandar linked to my email, along with all events connected to it. I THOUGHT I was adding birthdays to a birthday list, but no, all my events linked to my email. I don't want them to link to my email. I WANT to make a calandar for my payday events, and use a separate one for birthdays, and still another for appointments. How do I create a separate calendar for each of these things, and delete the one associated with my email?
*Edit, I finally figured out how to delete my email calendar, but now I'm stuck with a generic one I can't label instead, along with the birthday calendar. Further, when I try to add a birthday to ONLY the birthday calendar it adds it to the general instead. I WANT my birthdays on the birthdays and so on. How do I fix this??
**Sorry, for the caps but this is seriously infuriating at this point. I just want this thing to do what I tell it not what it wants to.

See - [http://support.mozilla.com/en-US/kb/How+to+set+the+home+page How to set the homepage] = Set more than one website as your home page

Need to Add and Remove Columns of ADF Read Only table from Backing bean

I have a scenario where I am trying to Populate TransientVO which is shown has a ADF Read Only Table in page.
I have couple of Check Boxes Based on their selection I am trying to render and hide certain Columns.
But the Issue which I am facing is only the Column Header seems to change where as the Rows and Values doesnt..
even If I apply the expression language rendering condition on the outputText inside those columns.. ..
So I am thinking to add and remove VO Attribute columns to the table from backing bean.
Need some sample code snippet or a better design to achieve this. Its kind of urgent too...having an aggressive deadline :(
Please chip in People..
Thanks in Advance .
TK

Table Code..
<af:table value="#{bindings.InventoryGridTrans.collectionModel}"
                                var="row"
                                rows="#{bindings.InventoryGridTrans.rangeSize}"
                                emptyText="#{bindings.InventoryGridTrans.viewable ? 'No data to display.' : 'Access Denied.'}"
                                fetchSize="#{bindings.InventoryGridTrans.rangeSize}"
                                rowBandingInterval="0" id="t4"
                                partialTriggers="::sbcSales ::sbcUsage ::cb1">
                        <af:column sortProperty="Period" sortable="false"
                                   headerText="#{bindings.InventoryGridTrans.hints.Period.label}"
                                   id="c38">
                          <af:outputText value="#{row.Period}" id="ot33"/>
                        </af:column>
                        <af:column sortProperty="Past12SalesCount"
                                   sortable="false"
                                   headerText="#{bindings.InventoryGridTrans.hints.Past12SalesCount.label}"
                                   id="c29"
                                   rendered="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}">
                          <af:outputText value="#{row.Past12SalesCount}"
                                         id="ot40"
                                         rendered="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}"
                                         visible="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.InventoryGridTrans.hints.Past12SalesCount.format}"/>
                          </af:outputText>
                        </af:column>
                        <af:column sortProperty="Past12UsageCount"
                                   sortable="false"
                                   headerText="#{bindings.InventoryGridTrans.hints.Past12UsageCount.label}"
                                   id="c40"
                                   rendered="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}"
                                   visible="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}">
                          <af:outputText value="#{row.Past12UsageCount}"
                                         id="ot47"
                                         rendered="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}"
                                         visible="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.InventoryGridTrans.hints.Past12UsageCount.format}"/>
                          </af:outputText>
                        </af:column>
                        </af:column>
                </af:table>

Sharepoint -Creating document libraries at run time and add and delete permission at runtime--taking too much time in C#(SOM)

Hi,
I am creating a batch job in C# and my requirement is as follows.
My Requirement is to create multiple document libraries and after breaking inheritance I remove all the groups which that library inherits and add some groups which are created for that library.Initially when libraries are less the creation
of library is good but once it gets increased ,system takes lot of time.I will have to create around 2000 libraries and almost 600-700 groups.
Q.1 ) What would be my approach?
Q.2) Do we have powershell command which can break inheritance and delete all the default groups in a one go (without looping) of a library?
Please suggests.

Hi,
It is recommended to create timer job for the time consuming job when in SharePoint environment.
About creating timer job:
http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
If you want to do it via PowerShell, the links below would be helpful.
About how to stop inheriting permission for SharePoint list and give custom permission using PowerShell:
http://www.sharepointlovers.com/sharepoint-powershell-command-to-stop-inheriting-permission-for-sharepoint-list-and-give-custom-permission/
About How to remove users and groups from a SharePoint list using PowerShell:
https://sharepointthinking.wordpress.com/2012/10/01/how-to-remove-users-and-groups-from-a-sharepoint-list-using-powershell/
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Matrix add and delete

Hi
i am developing a indent form in that i placed a matrix.
can u plz get me some hints of adding rows and deleting rows..
now i am placing buttons and writing code to do these tasks..

Hi,
Dim OCT_Form As SAPbouiCOM.Form
Dim OCT_Matrix As SAPbouiCOM.Matrix
OCT_Form = OCT_Application.Forms.Item("FormUID")
OCT_Matrix = OCT_Form.Items.Item("MatrixUID").Specific
'To add row in the matrix use
OCT_Matrix.Addrow()
'To Delete Row from the matrix use
OCT_Matrix.DeleteRow()
Hope this will help you.
Regards,
Mahendra
Edited by: Mahendrakumar on Sep 25, 2008 2:18 PM

Itunes can't add and deletes all my files

i'm trying to add some video clips to my itunes library
to later use with apple tv
well it crashes everytime and deletes the file or group of files
i was attempting to add.

See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

I need to add and delete individuals.

Similar Messages

Maybe you are looking for