I need to Backup PrimeInfra 1.3 and restore the Backup to 2.0
Hi,
can anybody please assist me backing up PrimeInfra 1.3 application backup and restore it to PrimeInfra 2.0??
Would appreciate your input.
Regards,
Sharan
Hi ,
procedure for backup and Restore:
Option 1: From admin console – run following CLI: (please note that we must include "application NCS" although it's optional in CLI. Without it, we may not be able to restore from the backup).
% backup filename repository repositoryName application NCS
Note: If using the command line backup, please stop the ncs server (ncs stop) otherwise the resulting backup coming out of it may be faulty (because backup job does not shut down the database during the backup).
Option 2: From gui, run server backup now:
% "Administration" -> "background tasks" -> select "NCS server backup" -> select "Execute now" -> GO
Option 3: Use nightly backup. Can be setup using following steps:
% "Administration" -> "background tasks" -> click "NCS server backup" -> this will bring you to the nightly backup config page.
NOTE: When using CLI backup commands, we should always use "application NCS" option in order to backup application data not the whole appliance.
For Restore:
Restore should be performed with the command "restore repository application NCS" as well.
Hope it will help
Thanks-
Afroz
[Do Rate the Useful Post]
Similar Messages
-
Now, I understand how the backup and restore the backup features function. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already there? I really do not want any music on my iPhone because I have an iPod for that. Thanks. Hope someone can help.
When you connect your phone and start iTunes on the left side you will see your phone listed under devices.Click on te icon next to it that looks like a battery. Click on the music button at the top and uncheck the sync music box.
-
How do i reinstall lr5 and restore the backup catalogues. Also preset folder,preferences, preview
Recently, i had to do a clean re-install of windows 7hp. And also i saved the needed data. of course i lost all of my downloaded software etc. Their is a second drive on my computer with lightroom;its backups and a folder entitled all my photos. The same material for lightroom is backed up to an external hard drive. How do i go about re-installing lr5 , and restore the catalogue back ups and the other folders.? I need a step by step set of procedures here as i am a computer stupie. Thanks for your help!
redfordl2012 wrote:
Have a few questions before i do the reinstall. step #1 is to reinstall from the original disk or to download from adobe"s website with proper serial #,regeistration #? Step #2 is to restore the catalogues by double clicking on the latest catalogue backup?(or are all backup catalogue"s clicked) When i do this backup will this transfer all of my parent folders,subfolders to the left panel of the library module in its original order? Step 3. After the catalogue restore is done, will this leave this cat. folder in the same disk under lightroom or will this folder be deleted. I have all of the lightroom folders backed up on an external hard drive. Last step is to move all my pictures from the all my photos folder to lightrm. Is this correct? How is this done? By an import in the lightroom software using import,move.or copy on the top import toolbar. I know i sound paranoid on doing these procedures correctly as i do not wish to lose any catalogues etc.. Thanks for your help!!
Not sure where you came up with these steps from
Step 1 ... either should work, but the download is the most recent version
Step 2 ... double-click on the latest catalog backup, yes
Step 3 ... Catalog is whereever you double-clicked on the backup file, you can move it whereever you want thereafter, using your operating system with Lightroom closed
Step 4 ... no moving of photos should be needed, definitely NO IMPORTING NO IMPORTING NO IMPORTING NO IMPORTING NO IMPORTING, if the photos are not linked in Lightroom, then follow these instructions http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm and remember NO IMPORTING NO IMPORTING NO IMPORTING NO IMPORTING NO IMPORTING and did I mention that you should not import your photos?
For future reference, you stated that you had Lightroom and its backups on the same drive ... do not do this ... backups must go on a different physical drive -
i am trying to unlock the iphone 4, aftermanual backup on the computer, i am trying to restore the backup, a message is showing up " itunes could not restore the iphone ' .....iphone ' because not enough free space is available on the iphone" but there is 5.7gb available
Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
How to do backup large files quickly and compress the backup without taking up much space
I am a member of a large business company, and there is large data stored in our company computers. To protect data, i want to do files backup for my important work documents, pictures, xls etc. Maybe you say the built-in backup tool can help you solve
this problem. But i want to know the data is so much, and i want to choose a simple, fast, and safe way to backup data. And i want one tool can help me compress my large data. Could you help me? Any free software?To save disk space on a volume, you could enable NTFS compression on the folder.
To backup a folder, you can use the windows built-in functionality. You could also copy the files to another location using a tool that only copies changes (like teh builtin robocopy or Microsft developed synctoy,...).
http://en.wikipedia.org/wiki/List_of_backup_software lists hird aprty backup software, some of which is free. The main advantages of using real backup software is you can have complex schedules
(differential backups, granfather-father-son principle) and more easy management and monitoring.
The 'previous versions' feature is a good solution to retain multiple versions of files without bloating storage requirements. It is not a real backup solution, but often aids developing a backup strategy that is both flexible as safe.
MCP/MCSA/MCTS/MCITP -
Using Time Machine to backup a iMac G5 and restore to an intel iMac
Is it possible to use Time Machine to backup my iMac G5 and restore my backup to a new intel iMac?
The reason being is that I my mother-in-law's company bought her a new intel Mac and she wants to trade with me since she only uses her Mac for e-mail, photos and accounting software.
I was thinking of making sure her data is preserved by using the migration assistant to transfer her data to my iMac G5 and then using my time machine backup to restore to her intel iMac. I have concerns about this method after reading about the intel/powerpc issues with time machine. I also have concerns that perhaps the version of MacOS 10.5 installed to my iMac G5 will not be optimized for intel.Well, not entirely. You cannot install or restore a PPC version of OS X to an Intel Mac because the PPC system will not work on an Intel Mac. You can copy your personal files, most preference files, and third-party applications (although it would be preferable to update all PPC-only apps to universal binaries which perform better on Intel machines.
Another possible concern is if your mother's company is transferring the ownership to her or simply purchasing the unit for her to use. In the latter case the computer belongs to the company, not your mother. She cannot then give it to you because it isn't hers. This problem should be resolved beforehand because the company may one day want the computer back.
Folders You Can Move to Your new Mac
From the Home folder copy the contents of Documents, Movies, Music, Pictures, and Sites.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
For FireFox:
/Home/Library/Applications Support/FireFox
/Home/Library/Preferences/org.mozilla.firefox.plist
Credit goes to another forum user for this information. -
Reformat MacBook and restore a Backup
what exactly do I have to do to reformat my MacBook and restore the Backup I have on my external hard drive? I want to revert to OS X only after installing Vista. will this bring back the EFI partition that was deleted?
well I figured it out, I had used superduper, then I just booted onto my external drive and opened disk utility and used it to format my hard drive and restore it from the external drive, luckily this also fixed the problem of brining back the EFI partition and I was able to get XP back. now I can play my old games again
Microsoft copied so many features from OS X on Vista
BOYCOTT VISTA!!!!!!!!!
even though you didn't really help me but your the only person that actually responded and at least tried to help I'll give you help points. thank you
(its really annoying having no one respond when you need it especially when doing something like installing Vista on your Mac which isn't supported so you have to do it blindly not knowing what the **** your doing because no one had the decency to respond) -
Updated to 5.1.5. and restore my backup, but backup was not available.
I just updated to iOS 5.1.1 on my 3GS phone, previously using 5.0, while plugged into the computer and iTunes 10.6.3. I had the phone set to backup to iCloud, and ran a sync operation before updating. Does that not also create a backup?
When the restore process began, it asked if I wanted to set up as a new phone or restore from backup. However the list of available backups did not have anything from today. The last one listed was from October 2011.
So I cancelled that operation, went through the new phone setup and then it asked if I wanted to restore from iCloud. So I chose the most recent iCloud backup which was from around 6 AM this morning. Now it is in the process of downloading all my apps, pics, and perhaps music as well. I don't know but it's going to take HOURS to finish this.
Anyway I opened some apps that have already downloaded, and some app data appears to be intact. But other apps have nothing after October 2011. And I'm talking apps that have tracked my fitness and workout progress over the past 6 months, bike rides in the past few months, car fuel fillup and maintenance history since October, I'm talking LOTS of data that appears to be gone.
What did I do wrong here? Did I not do what I should have done regarding backups? What is the point of backing up to iCloud if it's not going to back up all my app data???Yeah this was my first time connecting my phone to the computer since I went to iOS 5.0 and iCloud, so I wasn't familiar with the fact that it did not automatically create a backup on iTunes during the Sync process. Should have right-clicked on the phone device and did a manual backup.
But still, after restoring the backup from iCloud, I don't understand why data from certain apps got hosed (anything before October 2011, which was my last iTunes backup), while other apps' data appears to be fully intact. -
I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please
This has happened to me a couple of times and what I do is quit iTunes and restart my Mac and then try again and then it will work.
If iTunes has already created the backup, you should still be able to restore from the backup when you are connected to iTunes. Right click on the iPad name on the left side of iTunes and select restore from backup. After the process completes, sync with iTunes to transfer all of your apps, music, photos and other media back onto the iPad. -
I need to restore the backup to my iphone 3gs but the password associated with my Apple ID. It says the password I entered is not correct. Should i be putting in my Apple ID password or would it be a different password to unlock the backup.
I believe it is asking for the passcode you use for the screen lock on the phone.
-
While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?
Hi Vidbrent,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
Camera roll empty but shows 6.1 gb. Restored to original settings after backing up. When I restored the backup camera roll still shows 6.1 gb and is still empty. I imagine that the backup contains some corruption
Hi cfgolf,
Thanks for contacting Apple Support Communities. I agree with your assessment that something is going on with that previous backup. If you restored from that backup and the issue continues, I would recommend restoring and Set up as new. Before you restore, make sure you Transfer content so that you can sync it back after setting up as new. The instructions on how to Transfer content and Set up as new are both listed in this article.
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/ht4137
2. Transfer content
Before you erase your device, take a few minutes to transfer your content from your device to your computer to ensure that all your critical data is safe.
6. Set up as new
Complete the setup assistant. When prompted to set up your device, select Set Up as New iPhone and tap Next to continue.
Skip the Apple ID sign-in, in case the original issue was related to any of your content on iCloud.
Note: After setting up as new, you will need to enter the Visual Voicemail password for iPhone (on carriers that support Visual Voicemail). If you've forgotten the password, contact your carrier to help you reset it.
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
Cheers,
-Joe -
Can I back up computer with time machine on lion then reinstall snow leopard and restore from backup safely?
If your machine came with Snow Leopard or earlier and you have your install disks, yes, you can reinstall SL. However, you will need to erase the entire hard drive so you will lose all your files. Also note that there are some apps (such as Mail) which can't be downgraded "automatically" such as with a restore from Time Machine. Here is some info on TM:
http://pondini.org/TM/14.html -
I'm trying to set up my new iPhone using iCloud - I entered my apple ID and password and selected the backup to restore from but the next page asks me to enter a password for a DIFFERENT apple ID
What different Apple ID? Yours? Your friends? Your dogs... ? I think we are going to need more information. You're probably best setting up the phone as a new phone and restoring from iCloud later on.
-
How to backup and apply the backup after restored my iPod?
Hi, I just want to know how can I backup my iPod and apply the backup after I restored my iPod. Thanks.
Do you have all the songs contained in your iPod also in iTunes?
If the songs/content of your iPod all show up in iTunes under Library and the various subcategories (music, videos, ...) when you launch it, then they are "backed up" already. Then you can just restore your iPod and re-sync.
If the only existing copy of the files is on your iPod, then you need to move them from the iPod to another disk drive. I'm not sure how to do that, except for iTunes store purchases, you need to use some other procedure/program outside of iTunes.
Maybe you are looking for
-
i have nook simple touch activated and connected to pc, when i open adobe, it shows the nook and my library books, but if i click/drag book to nook, it shows the red no symbol, and will not tranfer the book, how do i fix it, or get the book onto my
-
Writing procedure using table name as parameter
I want to write a procedure to sample size any table. It could be employees, departments, etc. It will not know anything about the table (what table, columns, datatypes) until it is called. I want to invoke it sample_size(table_name_in, table_name_ou
-
My movie got deleted because I updated my iPod Touch & can't get it back. Help.
Yesterday I decided to update my 4 generation iPod Touch, before I updated it I synced all my stuff I had in my iPod that I haven't synced yet onto my iTunes library, but my movie didn't get synced and I didn't know that so I updated it anyways. Afte
-
Bug in LabVIEW 6.1 with Windows 2000 permissions
This is a bug I've discovered when using LabVIEW 6.1 in a multi-user Windows 2000 environment. After underlying software changes and the like, it is common that when exiting a VI, a message pops up saying that an underlying VI has changed and must be
-
Status Bar does not show editor details
In JDeveloper the Status bar shows editor information such as line and column number which helps identify where a problem is. This appears to not be working in Raptor. There is an "Editor" tag in the status bar, but no details.