I need to be able to copy text of a Gmail email I have sent and paste it in a new email when using firefox as my browser

hi everyone
I recently upgraded to the new firefox version. When using the previous version. i would copy text in emails I had sent and paste it into new emails. It saved me much time>
I am totally unable to do this with the newer version of the browser. There is no edit function on the tool bar that allows me to copy and paste.
any suggestions as to how I can cut and paste or save documents to use over again?
thanks

Hi, I had the same issue. My solution was to take the freeware-tool clickto.
So I'm now able to take any text, copy it and past it via clickto into a new mail.
[http://www.clicktoapp.com Clickto ]expands your copy-paste feature by showing you some "satellites" after doing the copy action. These "satellites" now will give you some opportunities to paste your copied content, for example a picture to facebook or a text to a new mail on gmail with just 1 single click.

Similar Messages

When I copy and paste from Word to my e-mail using Firefox it changes the font and spacing to single and 10pt. It just started doing this a month ago. It does not do it when I am on my laptop or using Explorer. Help, I hate explorer.

When I copy and paste from Word to my e-mail using Firefox it changes the font and spacing to single space and 10pt.
It just started doing this a month ago.
It does not do it when I am on my laptop or using Explorer.
Help, I hate explorer.

If this were a project that I was involved in, I would recapture the media at the correct frame rate and rebuild the sequences correctly.
Moving from production, to post production, to delivery is a series of steps, and the success of any particular step is based on having all the preceding steps done correctly.
Shortcuts and workarounds tend to create awkward and difficult problems, that often only surface late in the process.
MtD

Variable text is blank in emails when using Scheduled Task to email event log notifications

I am trying to use powershell to email notification when a user account gets locked. I am running the script from a server 2008 domain controller.
I have tried multiple scripts and I have the same issue every time. The script works fine when I run it directly from the powershell command line window.
However whenever I try running the exact same scripts from an event-triggered scheduled task, the script runs, however any content that generated from a variable is not added to the email. It is just left blank and ignored.
I have tried adding lots of permissions including domain administrator group membership to the account runs the task from and it doesn't include all the expected text unless I run it from the built-in domain administrator account.
The task runs and the email is sent, but the email is missing all the content generated by variables.
How can this be fixed?
Here is an example script.
$AccountLockOutEvent = Get-EventLog -LogName "Security" -InstanceID 4740 -Newest 1
$LockedAccount = $($AccountLockOutEvent.ReplacementStrings[0])
$AccountLockOutEventTime = $AccountLockOutEvent.TimeGenerated
$AccountLockOutEventMessage = $AccountLockOutEvent.Message
$messageParameters = @{
Subject = "Account Locked Out: $LockedAccount"
Body = "Account $LockedAccount was locked out on $AccountLockOutEventTime.`n`nEvent Details:`n`n$AccountLockOutEventMessage"
From = "[email protected]"
To = "[email protected]"
SmtpServer = "exch2010.domain.local"
Send-MailMessage @messageParameters
=================================================
Here is an example of task settings.
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2015-03-25T21:40:28.8095226</Date>
<Author>DOMAIN\administrator</Author>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[Provider[@Name='Microsoft-Windows-Security-Auditing'] and EventID=4740]]</Select></Query></QueryList></Subscription>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>DOMAIN\WilliamsD</UserId>
<LogonType>Password</LogonType>
<RunLevel>LeastPrivilege</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<Exec>
<Command>powershell.exe</Command>
<Arguments>-nologo -File "C:\powershell\l2.ps1"</Arguments>
</Exec>
</Actions>
</Task>

By variable text I mean everything that it generates by using a variable such as the user's name ($LockedAccount)
and everything else such as $AccountLockOutEventTime and everything else that is generated from
a variable.
Nothing like that appears in the email only hard coded text.
I am not running it remotely. I am logged directly onto the domain controller and I tried giving
the account that is used to run the task more and more permissions including domain administrator group membership with the same result.
When I run the exact same script on the same domain controller locally via the powershell CLI all of the info appears.
This is the info when the email is generated by running the script directly from the powershell CLI:
================================================
================================================
Account BondJ was locked out on 03/26/2015 20:42:18.
Event Details:
A user account was locked out.
Subject:
                Security ID:                         S-1-5-18
                Account Name:                 DC1$
                Account Domain:
DOMAIN
                Logon ID:
0x3e7
Account That Was Locked Out:
                Security ID:                         S-1-5-21-3440879815-2193117124-1719501250-1154
                Account Name:                 BondJ
Additional Information:
                Caller Computer Name:                DC1
===================================================
====================================================
Below is the contents of the email when the same script runs via scheduled task trigger using any account I try other than the built-in domain Administrator account.
=======================================================
======================================================
Account was locked out on .
Event Details:
===================================================
Just mostly blank email body with the info above. All the important information text is missing from the email.

I am just about giving up! I have upgraded Pages to 0.9 4.3. Now when i copy text from an incoming email and paste it it pastes in as an Object and I can't work on it.

I am just about giving up! I have upgraded Pages to 0.9 (4.3). Now when I copy text from an incoming email and paste it into Pages it pastes in as an Object and I can't work on it. It has a border round it and corner markers. I have never had this problem before. I have looked at every conceivable thing but cannot find how to get rid of this Object and just paste in the wanted text. If I fiddle and fiddle within this text I can eventually get a cursor and work on the text - but how on earth can I get rid of the surrounding box?
I don't know if this is at all clear but I can't think of any other way to describe this - but it looks like this in Pages with corner and top, bottom and side markers.
Monthly summary for .................March, 2013
Four more elephant Rescues during the month - first a yearling female named “.......................................
Lecia

Peter hello - I have been copying and pasting for as long as I can remember and it has NEVER done this before - so why now!? Anyway, Jerry has told me about Paste and Match Style --- yet another new thing!
I have also discovered that I don''t need to hold down Option when I go to Save to get Save As - I can hold down 4 keys (shift, option, command and S) and it will bring up Save As!!
Thanks for your response.
Lecia

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

I used to be able to send text messages to my email. It's now not working. It keeps coming in as a text. Is one of my settings off?

I used to be able to send text messages to my email. It's now not working. It keeps coming in as a text. Is one of my settings off? Please help?

Verizon is not doing that it is the mail that is doing that.
Check your device settings for email and read the owners manual as to how to set up mail to download. How you want it, leave on server, etc.
Good Luck

My iphone 4s was stolen i have locked and set it up to erase content when the iphone is turned on, it has 'find my iphone' on it will i still be able to track it if it turns on?

My iphone 4s was stolen i have locked and set it up to erase content when the iphone is turned on, it has 'find my iphone' on it will i still be able to track it if it turns on? PLEASE HELP really want to find it

You're welcome.
Once again, the Find My iPhone app has no effect on this.
Find My iPhone must be enabled with your iCloud account settings on the iPhone.
Location Services must be enabled.
The iPhone must be connected to the internet via an available wi-fi network or via the carrier's cellular network.
If the iPhone is powered off, none of the Find My iPhone features can work, and the same if the thief or whoever has access to the iPhone has restored the iPhone with iTunes as a new iPhone on another computer.

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

When using Firefox Sync on multiple devices, I used to be able to 'send' a tab from one computer to another. Is this still possible? If so, how?

When using Firefox Sync on multiple devices, I used to be able to 'send' a tab from one computer to another. Is this still possible? If so, how?
I don't mean the ability to see what tabs are open on another device (I know how to do this). But if I am at work and find something that I want to read at home, it would be helpful to 'send' the tab to my home PC so that when I return home, it will automatically open that tab for me.

Can anyone help?

If I copy and paste a comment in a pdf, when I create an xfdf file the copied comment isn't included. Is there a way to add these copied comments to the xfdf file?

If I copy and paste a comment in a pdf, when I create an xfdf file the copied comment isn't included. Is there a way to add these copied comments to the xfdf file?

Hi Steve Whipple,
This Link (Acrobat Help | Importing and exporting comments ) seems relevant to your query. Please let me know if it helps you export comments to xfdf file.
Regards,
Rahul Tyagi

I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

You know that you lost the layers when you saved it as a jpeg, right? But you're saying you can't add layers to the jpeg now when it's open in the editor? Go to Image>mode and be sure it's RGB, for starters. Are all the commands in the Layer menu grayed out?

Hi, While writing an email online using Firefox 3.6.3, I was using one of the "CTRL+left or right arrow" to move the cursor along the text. I must have pressed some other key because the display has become huge - and I can't scroll vertically or horizont

Hi, While writing an email online using Firefox 3.6.3, I was using one of the "CTRL+left or right arrow" to move the cursor along the text. I must have pressed some other key because the display has become huge - and I can't scroll vertically or horizontally, which makes using the Mail pages of Hotmail impossible. I have since logged in using MSFT Explorer and it works fine. This problem occurs only on the Mail page of Hotmail Live not on the home page or others.
Could you please let me know if this is a problem with Firefox, or if you have any advice on how to reset the appearance of Hotmail in Firefox?
== This happened ==
Just once or twice
== While I was compiling an email in Hotmail Live

Wow, lightning fast and absolutely right!
Thank you so much!

Copy the content of a sheet in excel and paste it in a new sheet.

How can I copy the content of the first sheet in excel and paste it in a newly created sheet. Both sheets have specific names (not sheet1 and sheet2).
Attachments:
Repeat_Report_monday.vi ‏85 KB

To copy the entire contents to the new sheet:
Select the Target sheet by name using property Sheets->Item("Target")
Convert target to WorkSheet
Wire target's WorkSheet->Range("A1") to specify destination
Use Sheets->Item("Source") to select the source sheet
Convert source to WorkSheet
Wire source to property WorkSheet->UsedRange
Wire to method Range->Copy, wire target range to Desination input
Note that no Paste function is required.
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector
Attachments:
Repeat_Report_monday_mod.vi ‏87 KB

How do I copy a Keynote slide and paste it into a new project?

Running MacBook Pro OSX 10.9.5
Keynote v. 6.2.2
How do I copy a Keynote slide and paste it into a new project?
jazzpsy

open the first Keynote
in the navigator panel, click on the slide to be copied to select
command C to copy
open the second Keynote
in the navigator panel, click the slide before where you want the slide to paste, command V to paste

HT5569 Is there a way to store a wi-fi password on an iPad and then copy and paste it into the proper space when you want to connect to your password protected network? (the password is 31 random characters)

Is there a way to store a wi-fi password on an ipad and then copy and paste it into the proper space when you want to connect to your password proctected newwor? (the password is 31 random characters)

Yes, if both the Mac and iPad are setup using the same iCloud account, then any notes you enter on the Mac will be synced across to the iPad almost instantly.
Same occurs with the 1Password app I mentioned. If you have both the Mac and iPad versions of it, and setup either iCloud or Dropbox syncing, any passwords entered on the Mac will be synced to the app running on the iPad ready for copying and pasting. This would be the most secure method, but not the cheapest.

I need to be able to copy text of a Gmail email I have sent and paste it in a new email when using firefox as my browser

Similar Messages

Maybe you are looking for