I need to be able to select multiple emails and foward them in one email

I have to foward emails; however, only current way is one at a time. I need to be able to select <n> emails, and then forward them to one or more people- but they want only one email with the other emails appearing in email as attached documents that they open by selecting one of the emails sent to them- need arisen as need to be reimbursed for business trip and they do not want multiple emails- only one email. I only havevan iPad and could do this crummy Outlook but can figure out how to do on iPad...

Well, just remember, this is only the second generation iPad and tablets are not really a true replacement for a fully functioning computer. As they evolve over time, more and more functionality will be built in.........

Similar Messages

How do i select multiple steps and move them?

Hi everyone! I'm trying to select multiple steps and move them all into a branch of a condition outcome. Here's the thing, I have almost completed my workflow with several steps for dynamic approval, however, i need to put a condition at the very start of the workflow and it does not seem that there is an easy way to move all of the steps into one branch. I find the workflow explorer really clumsy in this respect. Is it easier to just drag one outcome of the condition, say to the very end of the workflow? It does not seem to work for me though...hmmm...
Thanks and generous points will be awarded!

Funtion Module 'SWD_GET_WORKFLOW_DEFINITION ' gives the structure of the Workflow definition. The informations are stored in following table.
1. SWDSTEXT -> Table which gives WF Steps and descriptions
2. SWDSBINDEF --> Binding information is stored in this table
3. SWDSMNODES -> All nodes information is stored in this table
4. SWDSMLINES -> Workflow lines are stored in this table.
SWDSMLINES and SWDSMNODES are important tables for current requirement. By changing SWDSMLINES the bulk copy and paste can be incorporated. But this is very very risky, better to have a backup of workflow definition before doiing anything.
Any enthuiasts to write code for a unitlity to move multiple steps ?

How do I select multiple songs and uncheck them from compilations (itunes 10.5.2)

So I found to my annoinance that itunes has recently moved much of my music to compilations that shouldn't be there. I tried searching online for how to turn compilations off or select multiple songs and uncheck them from compilations all at once and although I found both answers, they must have only worked for older versions of itunes. I no longer can find the option to turn off compilations under preferences and when I try to select multiple songs at a time then press "Get Info" the "part of a compilation" checkmark is not there. It is only there when one song is highlighted. This is very frustrated. In fact I would venture to say I've never been so angry with Apple. There are 609 songs "stuck" in my freaking compilations! I don't have time nor should I have to take the time to go through every single song right clicking it, pressing "Get info", unchecking "part of compilation" then clicking ok. WAY TOO MUCH TIME! If anyone has any good news on a faster way to do this I'd be VERY THANKFUL!

This was a life saver! I even started to manually tick the box as well!

How do I select multiple pictures and compact them so there is no space between them?

I know this should be easy, but I am spending a ton of time trying to move 45 pictures in my video closer together...one by one. Is there a way to grab, let's say 20 pictures, and combine or compact them together so there is no space between them? I'm tired of doing it one by one and trying to get it right. Thanks -

Are these connected clips? Probably not at this stage.
If they were connected, and you wanted to shorten each one, the way to do that is to make the connected clips a secondary storyline and then shorten them. The magnetic storyline will pull them up next to each other.

How do I print multiple PDFs AND fit them to my paper size?

Hi,
I'm using a 24 inch wide plotter with roll paper. I want to be able to print multiple PDFs AND fit them to a specified paper size. I can print one page and fit it to the paper, but I can't do it with multiple PDFs.
For example, I have two PDFs that are only 8x8 inches. I want to print them side by side on a 24 inch x 12 inch page size and fit them to size and then FIT them to the page size so the end result will be 2 PDFs printing at 12 x 12 side by side.
I can't seem to be able to do this. I'm sure I was able to do this using earlier versions. As it is, I have to print one at a time and waste half of my roll paper size.
Any help?
Adobe Acrobat Pro, Windows 7 Proffesional, HP Designjet 111 roll fed plotter.
Thanks

Note this illustration is Based on Mac version of HP Print Driver standard inkjet. However Control should be smilar Layouts and titles may be different:
Adjust items shown according to pages desired

Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

Hi LRagsdale517,
You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
Please let us know how it goes.
Best,
Sara

Is it possible to select multiple clips and create a sequence from each individually?

Is it possible to select multiple clips and create a sequence from each individually? If you select multiple clips and select "New Sequence from Clip" it puts all of the clips into one sequence. Is there an easy way to quickly perform this on multiple selected clips separately?

So now I *have* used Butler with PPro, and it works very well, here's an idea of how to do it:
Import folder of clips
Ensure first clip selected in bin and sorted by Media Type
Most of these commands need shortcuts assigning - mine listed below
Macro:
To create seq from selected clip:
‘New seq from clip’ (Shift+CMD+N)
To duplicate this seq:
‘Reveal Sequence in project’ (Shift+F) - not strictly necessary as it will already be selected
‘Window | Project’ (CMD+9)
‘Edit | Duplicate’ (Shift+CMD+/)
To rename the duplicate
‘Enter’
Various keystrokes to rename as required
‘Enter’ - to make name stick
‘Shift+Enter’ - to reselect that sequence
‘Esc’ - to get out of editing name
To change resolution of duplicate:
‘Sequence Settings’ (CMD+5)
‘Tab’ x 3 (to get to H Frame Size)
‘xxxx’ (to enter frame width)
‘Tab’ x 1 (to get to V Frame Size)
‘yyyy’ (to enter frame height
‘Enter’ x 2 as prompt will say previews will have to be deleted
To then find next clip ready for macro to run again:
‘Open in Timeline’ (Shift+CMD+O)
‘Match Frame’ (Shift+Spacebar)
‘Reveal in Project’ (Shift+CMD+F)
‘Window | Project’ (CMD+9)
‘Down Arrow’ - to select next clip
I tried it with Butler (manytricks.com - free trial, $20 to buy) and it worked a treat, takes about 3 secs per clip
AHK (for windows) is at autohotkeys.com and is free.
You could start making multiple macros - that would enable you to do grade / resize in middle of duplication - and then export etc, but I figure you can figure that out ;-)

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

How can I select multiple photos without tapping on each one individually

How can I select multiple photos without tapping on each one individually?

Op: without tapping on each one individually
tap all the photos you want to delete.
Note what the OP is asking.

Is there a way to select multiple files and initiate the Capitalize function?

I have hundreds of files all in upper case that are driving me crazy. I can select them one at a time, right click and then select Transformations/Capitalize. Is there a way to select multiple files and initiate the Capitalize function?

You could use Automator to do this - take a look at the article at http://www.wikihow.com/Batch-Rename-Files-in-Mac-OS-X-Using-Automator to see how this might be done.
Good luck...

HT2477 How do I select multiple images without clicking on each one? Is there a way to select duplicate photos to delete them?

How do I select multiple images without clicking on each one? Is there a way to select duplicate photos to delete them?

Consider adding the delete symbol to the Finder window tool bar. This way you can highlight all the photos you want to delete at the same time then hit the "delete" symbol.
Open a Finder window/View/Customize Toolbar - follow the directions in the customized pop down window.

Simultaneously select multiple layers and sublayers

Hello
I am having to select multiple layers and their sublayers in Illustrator 2014, but taking the procedure described in the post below only lets you select multiple "main layers" with the sublayers left unselected.
Re: Is it possible to select multiple layers by selecting first and last layers?
Would someone please explain how both layers and sublayers can be selected in the Layers panel?
Getting more and more confused about the layer control in Illustrator..
Thank you in advance,
Ead

Ead,
I believe it is a matter of implicit selection, which may be a bit diconcerting.
You may try this:
1) Create a (small) number of layers with sublayers (or use the set yopu have), and tick Paste Remembers Layers;
2) ShiftClick first and last (relevant) and Ctrl/Cmd+C;
3) Create a new document and Ctrl/Cmd+F.
Is anything missing (obviously, everything copied has been selected)?

I can't get a proper connection to my Epson R1800 printer. I need to be able to choose Paper type and size. It keeps saying that the downloads are fine, but the System Library Extensions SMC1255TX.kext aren't working?

Dear sweet Apples, that know all the answers...
I can't get a proper connection to my Epson R1800 printer. I get the basics , but I need to be able to choose paper sizes and paper Types.
It keeps saying that the downloads went fine, but then it says that the System/Library/Extensions cannot be used because SMC1255TX.kext
isn't working. My downloads are useless as a result

Did you restart the printer?

HT1338 I am trying to instal incloud on my macbook. Its the white computer from 2008 year. In order to do that I need to install the Mac OS Lion and ILife. I was able to buy the apps and install them on my other computer but How do I install on this co

I am trying to instal incloud on my macbook. Its the white computer from 2008 year. In order to do that I need to install the Mac OS Lion and ILife. I was able to buy the apps and install them on my other computer but How do I install on this computer?

Does your Mac meet the requirements?
Lion 10.7 System Requirements
    •    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor (most models released since late 2006 - early Intel-based Macs with Core Solo or Core Duo processors aren't compatible)
    •    2GB of memory (recommend at least 4GB -- and ideally even more, as you'll see benefits in many computing tasks)
    •    OS X v10.6.6 or later (v10.6.8 recommended) for Lion download from Apple App Store; or Leopard 10.5.x if using Lion on USB drive
    •    7GB of available space (10GB recommended)
How to install Lion over Leopard - http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
 Cheers, Tom

How do I process multiple files and turn them from raw to jpeg

How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
Thanks Vince

I need to be able to select multiple emails and foward them in one email

Similar Messages

Maybe you are looking for