I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

You can't run iMovie 11 on a PPC G5 running the old OS 10.3 Panther - which is what you say you have.
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014
Digital camera RAW formats supported by OS X Lion:
http://support.apple.com/kb/HT4757?viewlocale=en_US
Digital camera RAW formats supported by OS X Snow Leopard:
http://support.apple.com/kb/HT3825?viewlocale=en_US

Similar Messages

I need to remove a rig/wires from my final cut pro 7 project. Can Apple Motion 4 remove wires/rig? Are there any rig removal plugins for final cut pro? Thanks!

I need to remove a rig/wires from my final cut pro 7 project. Can Apple Motion 4 remove them? If not can anyone recomment any plugins for Final Cut Pro or Motion that can remove them. Thanks!!

In Motion 5 there is a plugin from CoreMelt called "SliceX" that does this. But I don't know anything in Motion 4 that will do it. You may get more help posting in the appropriate "Final Cut Studio" section of this forum.

Change for final cut pro HD from Pinnacle Studio 10

Hello,
After lots of problems with Pinnacle Studio 10 (windoooooows.....) I finally chose to change for final cut pro HD on Mac OS 10.3.9
So far so good, I did lots of tutorials to learn but there is one very remarkable thing I really miss. Maybe there is just a thing in my configuration to fix...
Is it possible to view a part of a movie without randering it after every simple change? It must be technically possible because studio does it for years now, even with overlays.
Because I just upgraded my ibook with lots of RAM just to try out final cut for the moment, everything runs fine but rendering does take a few minutes/hours.... Well it is ok just to try out maybe I would get a macbook pro if final cut would assure me.
I feel like cutting blind!
Studio renders right before exporting, this may take a few hours but I would do this during night...
As I said, maybe its all my fault and I just have to change some configurations....
thanks for help
Fabi

Make sure your RT settings (upper left menu in the timeline) is set to UNLIMITED RT. This means that the render settings will be adjusted to play back at the best resolution they can without rendering. You might get a green render bar or orange render bar. If you get a red render bar, that means that you have a filter or two that isn't RT and requires a render, or you have too many layers to allow for RT playback.
If you simply drop a raw clip into the timeline and have to render, that means something is wrong. Your clip settings and sequence settings don't match. You need to choose an Easy Setup that matches your footage, then create a new sequence.
Shane

Why is there no disc for Final Cut Pro X, is there one coming, and how do I transfer the program to a new machine from the download? Thanks!

Hello:
Why is there no disc for Final Cut Pro X?
Is there one coming?
Can and how do I move the downloaded application from my old machine to a new computer?
Thanks!

You purchase FCX in the Mac App Store, there is no disc. You can reload past purchases under your account within the app store. You should also be regularly backing up your system

MacPro 2,1 Videocard Upgrade Requirements for Final Cut Pro X ?

I bought Final Cut Pro X in June, had no problem to install it on my MacPro 2,1 with processor
2 x 3 GHz Quad-Core Intel Xeon, RAM 4 GB and Graphic Card and ATI Radeon X1900 XT 512 MB running under Mac OS Snow Leopard. Recently I upgraded RAM to 8 GB. After switching to Mac OS Lion in july it continued to run in an unchange manner, even if not totally satisfactory due to the known buggy behavior of FCP X reported by many users, but it was anyway as usable as when I installed it.
Yesterday I decided to update FCPX to version 10.0.01, and did so in recommended manner by first deleting version 10.0.0 to the trash and empty the trash can. When I was going to install the new version of FCPX, as recommended, from the "Purchased" department of Appstore, I was denied to do so due to this message: "We could not complete Your purchase - Your computer’s video card does not meet the minimum system requirements".
That´s it, and here I´m stocked in a situation not being able to use FCP X which I have payed 229 $ for, because Apple has taken the right from me to use this application anymore. I can understand that Apple give You good recommendations concerning "the requirements" for running an application, but I doubt it´s acceptable and fair of Apple denying/hindering me to buy the product anyway, or, as in this case of mine, to use a product I´ve already payed for. Fact is, that even if the recommended requirements in respect to my video card not is met for this application (FCPX), so far I´ve still been able to use and benefit from it despite my computers "substandard quality" for running FCP X.
So, now I´m feeling forced to invest in a new videocard as well, if I want to continue to use my bought license of FCP X...What card do I need?
I´m considering to buy the video card ATI Radeon HD 5770 1 GB - do You think this card is compatible with my MacPro 2,1 build, and will meet the requirements of Final Cut Pro X version 10.0.01?

I wonder if there's any reason why OpenCL couldn't be an optional processing preference?
That way folks who had computers which do not have OCL or other cards which don't meet the spec could at least function knowing that the renders would not be optimal - or maybe real time playback of non optimized media might not be possible. But at least they'd be able to function.
I'm sure OCL cant be necessary for General display purposes in a 2D environment like video editing.
To shut out someones system without warning in a 0.01 update seems a bit radical to me.

Need Uninstall Advice for Final Cut Pro 5.0

Ok, so I recently upgraded to Final Cut Pro 5.0 from 4.5 HD. My computer is a G4 dual 450 mhz and is relatively stock (Rage 128 AGP card) with a few upgrades to the ram and hard drives. Unfortunately I failed to read the "Before you install Final Cut Pro 5.0" file and didn't realize I need a Quarts Extreme AGP card to run FCP 5.0. I can't afford to buy one right now, so I want to downgrade back to 4.5 HD. Is there an easy way to do this? I tried deleting all the FCP files and reinstalling 4.5 but it tells me to try again due to an error. Is there a file I'm forgetting to delete, or an easy way to uninstall 5.0, or a way to use 5.0 with the Rage 128 AGP card? Thanks
-Julian

A search of the FCP forum for AGP yields many results for this ... among them is: http://discussions.apple.com/thread.jspa?messageID=2339613&#2339613
Do the hack and you should be running fine with FCP 5
-DH

What is the best camcorder for final cut pro 5.1.4

yes i know it is an older program i am having problems uploading video from certain cameras to final cut pro. i was told it was a software problem with certain cameras and i cannot find any cameras that have firewire anymore that are not really expensive. just need some ideas guys thanks

My first question would be how well 5.1 would work with SL. People have reported problems.
As far as cameras are concerned, I would guess most any tape-based camera would work and so much depends on the kind of projects you work on that I wouldn't want to start guessing at your needs.
If you want broad access to tapeless and advanced formats try to locate and purchase an upgrade disk to 6 or 7.
Good luck.
Russ

Hello there. Any tips for an affordable AVCHD camcorder for Final Cut Pro X?

Hello there.
I am enthusiast for the new Final Cut Pro X.
I am now starting to learn with iMovie '11 and I would like to buy a AVCHD camcorder. It should be affordable and compatible with iMovie '11 and Final Cut Pro X. Any tips? I live in Italy.
Thank you in advance.
Gianluca

I use an SDT 750 and an AC 90, both Pansonic cams, both are set to shoot 1920 x 1080 50P.
FCP X works just fine with this footage as does interlaced.
If you Mac is fast enough you won't need to transcode to Prores/Optimise for simple Projects it works directly with imported media.
Al

Help. What format is best to export to for Final Cut Pro editing from PPCS5?

Ok. So I really have no experience with Final Cut. After reading online for an hour about what formats to use, I was still left with no clear answer and confused. Here's my issue: I have 1080i 60i .tod files from my JVC ready to be batch exported from CS5 Encoder, I need a format that will be read and able to be edited on Final Cut Pro without issue.
Could someone with Final Cut experience please chime in:
What should I use exactly?
Greatly appreciated,
Nick

Are you using Premiere on the same Mac that FCP is on? If so, your best format choice is QuickTime and codec choice would be ProRes422. If, however, you're on a different Mac or on a PC instead, I'd suggest QuickTime with the freely available, cross-platform Avid codecs. You'd probably want to use DNxHD, in that case.
The Avid codecs are great because, well, they're free, but more importantly, they're available for both decoding AND encoding on Mac and PC. ProRes, on the other hand, only has an encoding component for Mac, and it has to have FCP installed on it.

I need help. How to export split track for Final Cut Pro 7 Thanks

I need help. I have edited a film and now the company I have made the film for want a split track of it. I have no idea how to export a split track off Final Cut Pro 7 and I need simple language to explain it to me as I am a beginner. Thanks

I assume you have multiple tracks of audio? And the audio is distributed discretely over these tracks (sync sound on tracks 1 and 2, sound effects on tracks 3 and 4, music on tracks 5 and 6 for example)?
Then duplicate your sequence by clicking on the icon for your sequence in the FCP browser and control-clicking on it. From the drop-down menu choose Duplicate. Double click on the duplicate sequence you just created to load it to the timeline and canvas.
Now, working on the copy you just made of your finished sequence, click anywhere on the timeline, and type Command + 0 {zero} to bring up your sequence settings. Click on the Audio Outputs Tab.
Once the Audio Output Tab opens, set the Outputs to the desired number of discrete tracks you want to export - in this case I will set it to 8, as I have sync sound on tracks 1 & 2, Voice Over on tracks 3 & 4, Sound Effects on tracks 5 & 6 and Music on tracks 7 & 8.
Once I do that the 8 tracks appear. I set them all to Dual Mono as I want them to be discrete tracks:
Once I am done, I click OK and return to the far left side of the timeline where the audio selectors are, and carefully control - clicking in the empty space above the lock symbol,
From the drop down menu I assign the output of each track - track 1 to to output track 1, track 2 to output track 2, doing so to each track:
You need to set the output for each track. Once all my track assignments are done, I go to the menu File > Export . . . > QuickTime Movie and export my sequence, but now it is exporting with 8 discrete tracks of audio.
To do a quick check that everything is OK, re-import the movie you just exported back into FCP, and open it in the Viewer and you will see that it does indeed have the multi-tracks, as 8 mono track tabs appear at the top of the viewer.
Now give that QuickTime a name that includes "Split Tracks" in the title and copy it to your delivery drive.
MtD
Message was edited by: Meg The Dog to fix typo

Video walkthrough online for Final Cut Pro X when approaching it from a Never Been Used Before scenario?

Hi there
I've used iMovie a few times and been quiet successful with it, but I was thinking of getting Final Cut Pro X as I want to do some more advanced video editing now (I really dont know the terms for what I want to be able to do are, but things like be able to stack say 10 different camera angles up on top of each other and decide which part of each one I want to use).
My problem is that I cant find many videos online (youtube etc) if I were to approach it as if I've never used it before.
Most of them go on about how things have changed from one version to the next and whats new in this edition.
I dont want WHATS NEW though, I want WHAT IT CAN DO.
So some kind of walkthrough (It can be an 90 minutewalk plus through for all I care) that shows off most of the things you can do with it.
Any suggestions of ACTUAL links?
Thanks in advance.

What you described isn't really multi-cam editing.
I think FCP X is idea for what you want because you can AUDITION as many clips as you want then you simply select this or that angle and play it through in the timeline - it's a fabulous feature in FCP X.
I strongly recommend you watch some good (PROPER) tutorials on FCP X.
I've tried a number of FCP X Tutorials and in my experience, Ripple Trainingis clearly the best.
There is a small fee, but it's more than worth it.
I just read your follow-up post.
shippo_uk wrote:
Does anyone already have the practise media and do they fancy popping it up online to share?
No they don't - that is STEALING.
Do you begrudge these people a living?
(There's a word for people like you).
Andy

AGP card needed for Final Cut Pro HD

I'm reinstalling final cut pro HD on my new Power Book G5 and error message comes up that I need a AGP card. What's with that?

Hi:
Wellcome to the forums !
P^robably this thread helps:
http://discussions.apple.com/thread.jspa?messageID=3886840&#3886840
Alberto

How to upgrade My Mac Book Pro 15" Mid 2010 from Ram 8go to 16go to use for Final cut pro ?

Hi,
I have a MacBook Pro (15-inch, Mid 2010) 2,66 GHz Intel Core i7 with graphic card NVIDIA GeForce GT 330M 512 Mo and would like to know if its possible to upgrade my Ram from 8 to 16 Go to work more faster with final cut ... Thanks for your feed back

scrutinizer82 wrote:
So, you do recognize that one can upgrade MBP RAM past 8 GB? It means Niel was incorrect.
Only for certain models will that apply. Niel gave a correct answer. Note that tofaustral has a 2010 MBP, I have both a 2010 and 2011 MBPs. The former is limited to 8 GB RAM and the latter can accept 16 GB RAM. In both cases, Apple specifications state that 8 GB is the maximum.
if technically it's possible to have 16 GB of RAM will it affect performance positively (speed up), that is, without excessive amount of unused RAM? Did you feel improvement after installing 16 GB?
RAM does not speed up a computer. It will allow for more applications to be run simultaneously and will allow the computer to run more efficiently when a resource intensive application requires more RAM than might otherwise be available. If an application requires to run efficiently with 2 GB RAM, there will be no difference in performance if the computer has 4 GB RAM installed or 16 GB installed. A resource intensive application will run more efficiently if it requires more than 8 GB RAM on a computer with 16 GB RAM installed as opposed to one with just 8 GB RAM. RAM not used has no affect in performance.
Furthermore, what about Apple's warranty in this case? Will it be automatically terminated?
If the user manual has instructions for installing RAM, then doing so will not void the warranty unless you damage the computer in the process.
Ciao.

Which processor to choose for Final Cut Pro working with files from DSLR?

I am shooting in hd with Canon Eos 5d MK II and another camera the Panasonic HDC sd700.
I am considering upgrading my Mac to either a stationary Mac Pro or an Imac 27 inch (which is a bit more flexible).
1.) How much difference in performance of FCP between the 2,8 GHz Quad-Core Intel Xeon "Nehalem" and the 2.8GHz Quad-Core Intel Core i5 (the latter installed in the Imac)??????
2.) How much need is there for external esata drives which I can get with the Mac Pro option in regard to performance needs in comparison with the slower FW800 I get with the Imac? Is this crucial? Will FW 800 external drives be to slow?
I am thinking of installing 8GB of ram if I go for the Imac and 6GB of ram if I go for the Mac Pro.

A point to remember Motion uses the RAM on the graphics card for rendering not the machine RAM .. I have also read that while FCP is still 32bit it can only access something like 4 / 6Gb RAM at a time .. so as a previous post says you can always add more RAM and more HDDs in a MAC Pro .. indeed it is a breeze to upgrade a graphics card too .. I have both a MAC Pro and an i7 iMAC I never use the iMAC for FCS work .. it is powerful enough but Geekbench (free benchmark tool http://www.primatelabs.ca/geekbench/) puts my MAC Pro way ahead of the iMAC .. my Pro is a 2 X Quad Core 2.26 with 12Gb RAM
Regards
Jim

What video card do i need for final cut pro x?

I can't update because it says my video card isn't good enough. It's the standard card that came with the Mac Pro. Can't find a list of approved video cards.
I don't want to spend a great deal and I hoping that some day, some year before I die, Apple will release a Mac Pro with Thunderbolt, if they ever get back to being a computer company again.

I have MacPro 1,1 (first generation) bought NVIDIA GeForce 8800 GT on eBay and it works great. This one
http://www.ebay.com/itm/Mac-Pro-nVidia-GeForce-8800GT-512MB-Video-Card-2006-07-/ 270664357684?_trksid=p4340.m185&_trkparms=algo%3DSIC.NPJS%26its%3DI%252BC%26itu% 3DUA%26otn%3D5%26pmod%3D160544871829%26ps%3D63%26clkid%3D5580585100561583358#ht_ 3677wt_1141

I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

Similar Messages

Maybe you are looking for