I need to cancel the code that I redeem and restart the code

I went to use another email and pass word to redeem my gift card. I did not relize I could use my email. so I need to have the code canceled from the [email protected] so I can use it on my [email protected] can some one help me. this is my first time using itunes

Click here and request assistance.
(63314)

Similar Messages

My iphone 4s crashes too much the screen became black slowly and restart the phone this happens when i use anything safari phone messages i think i am having big problem i hope someone help me

I cant use the iphone its useless now :S i think its a software problem but i restored it many times

I suffer same. AppleCare can't seem to solve the problem. I did a restore from backup. Then I did a restore as new phone (virgin). Then I did a restore as a new device and then backed up from a stored backup (which does not replace media). To no avail. Some days it works fine, and on others it's extremely bothersome. The major symptoms:
1. It can take 5+ seconds to delete a photo.
2. It can take 10+ seconds for the camera app to activate. In many instances, the moment is long gone.
3. Switching from camera to video can take 5+ seconds.
4. Saving a photo that's been optimized in iOS 5 can take 30 seconds. Absurd.
Note that Photos and Camera aren't the only affected applications. What'sApp can have the same issues on occasion. Voice Memos don't respond like they should, either. I suspect that there's some behind-the-scenes operations with network feed to which iOS gives its full attention (contrary to the UX getting full attention is is historically the case). This makes the user interface painfully slow at times — and, as most of us here would agree — painfully annoying. This might have to do with changes designed around iCloud, but I'm not even (yet) using it.
The bottom line is that what used to be a quick, pretty good phone camera is now totally lackluster and unreliable for fast shots. Sometimes I think Apple spends too much time worrying about form and not enough about function.

I need to version every node that i upload and if the filename exist create a new version of it??

hi i have this import component through which we could import files into cq but i need it to be versionable ??
I need help on how this could be achieved??

It depends on how paranoid you are.
There is a theoretical risk that a site in another tab or window could read through the history of your banking session and extract information, but that probably is very rare.
You definitely want to close the browser before leaving the PC available to another person.

When ever i try to open a PDF file while on a Firefox browser an endless supply of empty tabs keep poping up, to the poit that i have to restart the computer. What should i do?

This is very annoying because the only way i can read PDF files is on a whole different computer, this makes doing school work very irritating.

This link should help you fix this - https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows

I have a MacPro with 10.7.2 installed. I want to create a new partition and install 10.5. When I put in the install DVD and restart the computer, it does not restart. What can I do?

I just purchased a MacPro with 10.7.2 installed. I want to install 10.5 on a separate partition.
I created the partition with no issues, now when I put in the 10.5 install DVD and restart the computer, it does not restart.
All I get is a grey screen. no icons, no nothing. I have to shut the computer down.
I really need to do this. I plan on upgrading to FCP X, but I still need to finish some old projects that were done with FCP 7. I need the different boot drives

Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD

Safari 5.1 will not change my privacy settings without quitting and restarting the browser.

I have installed Safari 5.1. When I attempt to change the block cookies setting in the privacy preferences, the browser will not change the settings until I quit and restart the browser.

Quit Safari. Open a Finder window. Select your Home folder in the Sidebar on the left.
Open the Library folder then the Cookies folder.
Move the Cookies.plist file from the Cookies folder to the Trash.
Restart your Mac.
If that didn't help, quit Safari. Open a Finder window select your Home folder in the Sidebar on the left. Then open the Library folder, then the Caches folder, then the com.apple.Safari folder. Move the cache.db file from the com.apple.Safari folder to the Trash. Relaunch Safari.

Is there a t-code that allows you to view the AUC Settlement Log?

One of my counterparts in a different region would like to review the AUC Settlements for the prvious month. Is there a t-code that allows one to view the AUC Settlement Log or is there a special procedure required to view those results?
thanks in advance for your help.
Dan

This was perfect. By the way the t-code for program RAHERK01 is: S_ALR_87012058
Thanks to everyone that replied. The other two reports will help with some other needs.
Dan
Edited by: Daniel Goodhart1 on Nov 10, 2011 5:14 PM

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

I have a macbook purchased in 2009. I just purchased a new ipod and am in a loop of updates that seems to have no end. Do I need snow leopard? Will that then let me use the latest itune update?

I have a macbook purchased in 2009. I just purchased a new ipod and am in a loop of updates that seems to have no end. Do I need snow leopard? Will that then let me use the latest itune update?

You need to buy Snow Leopard from the online Apple Store. You don't need Mountain Lion.
(85170)

I need to reset security question but the email that was saved for changing the password and security question is blocked , what can i do

i need to reset security question but the email that was saved for changing the password and security question is blocked , what can i do?
i purchased my account but i cant use that because apple ask me about security question and i forgot the correct answer

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

I am in the US, but need to download an app that is only available in the iTunes Australia store. How do I do this?

I am in the US, but need to download an app that is only available in the iTunes Australia store. How do I do this?

Move to Australia, get an Australian credit card with an Australian billing address then change your iTunes address to your physical address in Australia.
(you can't)

When I execute my code that contains SetCtrlVal, I get the following error:

When I execute my code that contains SetCtrlVal, I get the following error:
“Invalid argument type found double expected int.” The variable in question is declared double, and from reading the help info, the variable should adapt to the declared type.
Solved!
Go to Solution.

A typical reason for this error is using a wrong panel handle in SetCtrlVal: check that the handle passed to the function effectively is the one returned from LoadPanel or NewPanel function.
Another common issue it trying to address a control on a tab page using the handle of the panel that holds the tab control: you must consider that each tab page has its own panel handle as it were a separate panel; you can retrieve the handle associated with tab pages with GetPanelhandleFromTabPage () command.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD.---I am using a Dell and can't import the CD I need because the window doesn't automatically pop up. How do I fix this? Any thoughts?

"To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD."
I am using a Dell and can't import the CD I need because the window doesn't automatically pop up. How do I fix this? Any thoughts?

You could try my script ConvertFormat and see if you like the results. Would be easier than inserting the CDs and correcting the tag info again. Just be aware this is a one-way trip. Once you've thrown away some quality to shrink the files you can't get it back without going back to the source. You may better off investing in a bigger drive.
If you just want to squeeze more on the iPod you can use the built-in iTunes option to convert files to a lower bitrate as they are added to the device.
tt2

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?

You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

Mac OS 10.5 / I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!! I do have the OS dvd that i purchased years ago... But my computer will not start from it on its own. My

Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guys

Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;)

I need to cancel the code that I redeem and restart the code

Similar Messages

Maybe you are looking for