I need to change logic behind Calculate Duration button in Leave of Absence

Hello,
I need to change logic behind Calculate Duration button in Leave of Absence creation page.
How I can do that?
Please suggest.
Regards,
mofizur

This will be a OAF customization, you have extend this oracle.apps.per.selfservice.absence.webui.AbsenceCO Controller.
in processFormRequest you have catch event to Calculate Duration Button.
You need to write custom your requrirement Logic for event to Calculate Duration.
Thanks, Avaneesh

Similar Messages

Change color of the "slideshow" button while leaving the "subscribe" button

I just want my "slideshow" button to pop a little more for my computer challenged friends to know not to click thru all the photos, but click on the red "play slideshow" button. Can't figure out how to isolate and change it to red.
God Bless

The 'Play Slideshow' button is a PNG image, this image changes depend on which theme you are using... so it is not easily to change it.
But, you can always have a bubble shape above it says: 'Click Me!'

Change logical system names after system copy

Hi!
We successfully installed SAP ECC 6.0 system as system copy.
All the logical system names of old system have been copied to new system.
Question
What is the approach to change the logical system names for new SAP system?
a) just via tcode SCC4
b) via BDLS
c) other tcodes, reports
Thank you very much!
regards
Jürgen

Hi,
Go though the system copy guide.
http://service.sap.com/instguides
After system copy,
If you need to change logical system names in the system that results from the copy, change the logical system names as described in SAP Notes 103228 and 544509.
https://service.sap.com/sap/support/notes/103228
https://service.sap.com/sap/support/notes/544509
Before running BDLS to change the logical system name, you have to define the correct logical system name in the new copied system. in tcode BD54.
- while running BDLS, execute in background.
Regards,
Debasis.

Changing the logic to calculate score

Hi!
Score of the KPI(KPI1_TARDEV) is calculated based on some logic. I need to change the logic for some 100 KPIs using command instead of right click on the Variable and then selecting 'Logic' and then editing. This is very difficult beacuse there are more than 100 KPIs for which i need to change the logic.
Is there any command like SET VARIABLE to change the logic to calculate the score?
For example:
Currently all the Achievement KPIs have score calculated based on the formula KPI1_ACT%KPI1_TAR.
I want to change it to
KPI1_TARDEV
IF KPI1_TAR LT 0=(1-KPI1_ACT/KPI1_TAR)*100
IF KPI1_ACT LT 0 AND KPI1_TAR GT 0=(-1+KPI1_ACT/KPI1_TAR)*100 OTHERWISE = KPI1_ACT%KPI1_TAR
can i use command some thing like below?
set vvariable logic KPI1_TARDEV AS
KPI1_TARDEV
IF KPI1_TAR LT 0=(1-KPI1_ACT/KPI1_TAR)*100
IF KPI1_ACT LT 0 AND KPI1_TAR GT 0=(-1+KPI1_ACT/KPI1_TAR)*100 OTHERWISE = KPI1_ACT%KPI1_TAR
Thanks
Praveen

Hi Praveen,
I was faced with a similiar situation, please search the SSM forum for this thread: "Customer exit - Cube Builder SSM".
Read the whole thread.
Thanks,
Tsholo.

My 2011 MacBook Pro does not start and stop after the apple appear, they said that the problem is a video problem and need to change the logic board. Cost almost same to buy a new one. Somebody have the same problem?

I have a MacBook Pro early 2011. Does not start. After the apple show, a blank screen appear. The service said that the problem is with the video plaquue in the logic board. Need to change. Cost lmmost the same than a new MacBook Pro. Somebody has the same problem? What we can do?

I hate to break this to you, but life isn't fair. If your job is that critically in need of a computer, then you should have a spare to use for just this kind of situation or have your employer provide you with a computer to use.
Computers break down, just like cars. If your car breaks down do you curse the car maker or get it fixed? Surely, you paid more for your car than the computer.
This is reality. Best get used to it because it won't get any better.

IPad MAPs: used to be able to enter 2 locations and instantly get directions. Came home from Europe and it no longer calculates directions. Did I need to changes something in settings?.

iPad MAPs: used to be able to enter 2 locations and instantly get directions. Came home from Europe and it no longer calculates directions. Did I need to changes something in settings?.

Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer. As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
You can try and find 3rd party applications that might help you. I'm sure you'll pay, however.
Let this be a very important lesson learned.
Best.

Logic behind having to accept server changes with DEPENDENCIES

Hi,
Does anyone know the logic behind having to accept server changes with dependencies (deliverable feature)? Shouldn't this edit of the communicated delivery date automatically be changed in the receiving plan? The acceptance of late/early delivery is in the
sync-action...

Hi Sander,
Here is an interesting article on the delivrables dependencies features: http://blogs.msdn.com/b/project/archive/2007/02/24/deliverables.aspx
It applies to PS2007 but the feature is quite the same in PS2010.
What is exactly your concern?
Basically, concerning the dependencies, first you can retrieve the information on the dependency date on the server (meaning the date coming from the deliverables published by the "sender" project manager). Then you can decide wheither or not you can to
synchornize your milestone on the dependency.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Could you please help me understand the logic behind certain things in OSX?

Ok, so I try to be an open-minded guy, and I bear no particular allegiance to either OS. I own a Sony TZ and a Mac mini, and my wife has a MacBook Pro. I use both Oses.
There are certain things I have trouble understanding in th Mac OS, so what I'd really like to understand the logic behind certain design decisions in the OS, and why these might be better ways of accomplishing things. I know how to get around all of the things I mention, so I'm not looking for instructions; rather I'm looking for well-thought out explanations for why these features are the way they are.
*1. Programs don't quit when you close the window.*
- This totally puzzles me. Why design it so that program windows are independent are from the running program itself? There must be a reason, cold someone explain how this is more efficient? To me, it's simpler to click an X on the window you are working on to completely shut down a program, rather than to either mouse through menus to select quit, or be obligated to using Command Q keyboard shortcut.
*2. Menu bars are on the desktop.*
- Related to the first point, why make the main thing framing your desktop be something which is always changing depending on the program? Why have file menus outside the main window of the program. Having the menu bar on the desktop then necessitates an additional area, the dock, which has to be used as a launch bar and to tell you what programs are currently running. That obligates you to having 3 different areas of screen: 1 for program menus, 1 for running programs, and the program window itself. This seems very inefficient to me. Not to mention all the messy-looking floating palettes all over the place, again because everything is separated and not nicely contained in a single program window.
- Really, having a changing menu bar that frames the desktop isn't even consistent wth the whole desktop metaphor, which is that you place things on a desktop, like programs, files, etc. Are you changing the whole desk everytime you load a new program, yet the wallpaper stays the same? Doesn't seem to be logically consistent to me.
*3. No delete key.*
- This one really gets me. Why make such a commonly used key be a function key (Fn + Backspace)? Why make the user press a secondary key for a major function?
*4. No Cut command.*
- I read something about how Cut doesn't actually make sense when moving files around, but I obviously didn't fully understand it. Why make the user command drag, when you can just do Ctrl X??.
*5. Launching Apps from the Finder.*
- This seems weird to me, that you find and launch applications from the same thing you use to view files. Program icons in the finder are placeholders for the entire program, not files, yet they are found in the file viewer. Again, to me this seems logically mixed. I really dislike scrolling through Finder to look for apps. I know there is Spotlight and the dock (used as a quicklauncher), but these are really just workarounds for a setup which seems inherently illogical. To me at least, a menu of applications make more sense, ie, the start menu.
Anyway, those are all I can think of now, although there are other things aout OSX that don't make sense to me.
Thanks in advance! If I can understand Apple's reasoning and it is convincingly better, that will go a long way towards making me more comfortable with this OS.

1. Programs don't quit when you close the window.
That's really more a matter of what you're used to. It comes down to a programming decision as to what Apple and Microsoft considered to make sense. MS thinks that if there are no open windows, you're done using the app. Apple thinks you aren't necessarily done yet, as others have mentioned. I certainly wouldn't want Photoshop to quit every time I closed the last open image I was working on. Would be nice though if Safari would quit when I close the last open browser window. It's quick to relaunch if you really weren't done with it, so wouldn't be much of a bother to have it shut down with the last window.
2. Menu bars are on the desktop.
Makes way more sense the Microsoft's approach of repeating the same file menu on every open document in a program. How many places do you need to see File, Options and other common menu headings?
2. Menu bars are on the desktop.
Related to number two. The forward app is the only one you can directly work in, so why not have the menu bar change to reflect the choices for that application? When you go back to the previous app you were in, the menu bar changes back. So what loss of functionality is there? It comes back to not having menu bars on every single open window. There's no need or purpose for it.
3. No delete key.
Backspace does the same thing.
4. No Cut command.
Command+X, not Ctrl+X. This is Mac, not Windows. There's also very little need to ever do this from the keyboard. If you're moving files that are on the same drive/partition, then just drag and drop from the target folder window to the source. It's automatically a move. If going from one physical drive or partition to another, it's automatically a copy. Press and hold the Command key during the drag to make it a move.
Besides, you don't really think Windows cuts the entire folder or file contents into RAM, do you? If your computer has 4 GB of RAM, and you cut 12 GB of data, it of course can't possibly fit in the clipboard. All Windows does when you do a cut is visually remove the files and folders from the screen. If the items are going to a location on the same drive/partition, it does the same thing as if you did a drag and drop move. The file table is simply updated to reflect the new file or folder locations. If it's to a different drive/partition, it then performs a copy then delete action, same as OS X.
5. Launching Apps from the Finder.
A program is just as much a file as any other file. It takes up space on the drive. The OS of course knows what to do with it when you double click an app. Same as it knows what to do when you double click a document related to an app. Windows is no different. An .exe file is also just as much a file as a .doc file. The .exe extension tells Windows to try and treat it as a program to load into RAM. It's not just a simple placeholder. The program has to be made up of something.

New outputs generated when changing logical system in output master record

Hi!
We are sending documents from ECC 5 to a legacy system via XI/PI. We are about to move from an old XI installation to a new PI installation. The output record used (for example in a billing document) is set up based on logical system. When moving from the old to the new platform, we need to change the output records from the old logical syste to the new logical system. However this leads to generation of new outputs in all billing docs when opened in change mode. This goes also for billing docs where we already generated outputs via lthe old logical system in the past. Is there any solution to prevent the automatic generation of outputs for documents where the condition type already was successfully processed (as it works when the logical system is not changed)?
Best regards
/Björn

Normally the same output is not supposed to be generated, unless 'Multiple issuing' checkbox is checked in the output type configuration.
Also you can probably add a requirement in the output determination procedure and check if output record already exists. Take a look at the standard 'Reprint' routine, kind of the opposite is needed in this case.

Unable to change Still/Freeze Frame Duration in User Pref Edit tab

Process-selected new project, change Still/Freeze Frame Duration in user preferences on the edit tab.
Need to change to 10 minutes. Typed in the field 00:10:00:00. When I hit ok, I get a beep and it defaults back to what was in there, 01:00:00:00. So tried a larger number 02:00:00:00. Same result. A beep.
So went ahead with project and opened a sequence and tried to change it from the viewer. Same issue.
Trashed prefs and started from scratch. Same issue.
Ideas?

Trashed prefs rebooted originally.
Process as follows for trashing prefs. First time through I had opened a project. This time did not.
Open Home Folder
Open Library
Open Preferences
Delete com.apple.finalcutpro.plist
Open Final Cut Pro User Data
Delete Final Cut Pro 5.0 Prefs
Delete Final Cut Obj Cache
Delete Final Cut Prof Cache
Run disk utility to repair permissions.
Reboot.
Did not open a project this time.
Same issue but now I am able to put a slug in the time line and by selecting clip properties, can set the duration (was not able to do this before so some progress). Still can't set duration though as earlier described from edit tab on the user preferences page for still/freeze duration.

What is the logic behind the start routine

Dear One's,
Kindly take a moment and explain the logic behind this start routine written in update rules of ODS.
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CST_T07_O006.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries.
DATA: ITAB_/BIC/AT07_O00600 TYPE SORTED TABLE OF /BIC/AT07_O00600
      WITH HEADER LINE
      WITH UNIQUE DEFAULT KEY INITIAL SIZE 0,
      DATA_PACKAGE_NEW TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
      WITH HEADER LINE
      WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
sort the datapackage based on lead number and lead program definition
SORT DATA_PACKAGE BY /BIC/TLDNR /BIC/TLDPRGFTE.
from the resources ODS read all lead values based on the values those
SELECT * FROM /BIC/AT07_O00600 INTO TABLE
         ITAB_/BIC/AT07_O00600
         FOR ALL ENTRIES IN DATA_PACKAGE
         WHERE /BIC/TLDNR = DATA_PACKAGE-/BIC/TLDNR.
FIELD-SYMBOLS: <LS_DATA_PACKAGE> TYPE DATA_PACKAGE_STRUCTURE.
FIELD-SYMBOLS: <LS_/BIC/AT07_O00600> TYPE /BIC/AT07_O00600.
loop at internal table of ODS to check if there are lead program defin
from the source which mean the values of lead program definition in OD
values of lead program definition in datapackage.
   LOOP AT ITAB_/BIC/AT07_O00600 ASSIGNING <LS_/bic/at07_o00600>.
     READ TABLE DATA_PACKAGE
      TRANSPORTING NO FIELDS
      WITH KEY
      /BIC/TLDNR = <LS_/bic/at07_o00600>-/BIC/TLDNR
      /BIC/TLDPRGFTE = <LS_/bic/at07_o00600>-/BIC/TLDPRGFTE
      BINARY SEARCH.
      IF SY-SUBRC <> 0.
new lines with zero values are inserted because there are no correspon
DATA_PACKAGE_NEW-/BIC/TLDNR = <LS_/BIC/AT07_O00600>-/BIC/TLDNR.
DATA_PACKAGE_NEW-/BIC/TLDPRGFTE = <LS_/BIC/AT07_O00600>-/BIC/TLDPRGFTE.
DATA_PACKAGE_NEW-/BIC/TLDFTE = 0.
APPEND DATA_PACKAGE_NEW.
     ENDIF.
ENDLOOP.
append the new records which are created for the leads in the datapack
APPEND LINES OF DATA_PACKAGE_NEW TO DATA_PACKAGE.
reset the sorting of the datapackage back to its original state
SORT DATA_PACKAGE.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Thanks in advance

hi,
it's retrieve data from table /BIC/AT07_O00600
and add to data package, so your records will be more than from source
hope this helps.

Hi I am actually in the UK - need to change my profile, b...

Hi
I am actually in the UK - need to change my profile, but...
Can anyone give me advice on a small-office network choice of components and cnfiguration? I am a relative newbie for larger-scale networking, and am looking to clean up and improve our network. We have a typical "domestic" 4-port wireless broadband router (Netgear) connected to a cable modem and a collection collection of 3 small 5-port hubs (1 D-Link, 1 Netgear, 1 generic own-brand - forget who) and a wireless extender to give us more ports as we ran out several times.
I would prefer to get a single good quality switch/router from one source as we keep getting outages and having to reset the network maybe once per day to gete the machine all to talk to each other, and we also have regular conflicts over bandwidth use where one person's large downloads may effectively prevent others from getting any decent internet access via http/ftp/smtp etc. We have about 6 desktop PCs and a similar number of laptops, and a few gaming consoles that need to be connected, plus occasional visitors who would like access out to the internet (but usually these are people we know and trust).
I am guessing that a 24-port gigabit switch would be a good option, but do we need a separate router or is there a combined 24-port switch/router? What do we do if we want 2 wireless access points? How can we control the priority and/or amount of bandwidth allocated to different types of traffic? What about VPN access or similar that we might want in the (near) future? I can't find any more tutorials or guides about good choices of kit to make this all work well.

you will need a separate router and switch. you may check some vpn routers from linksys if you want vpn connection behind the router. you may try rv08, rv016 or rv042. any gigabit switch will be fine behind the router.

Need Help changing a Menu button display Name

Hello,
I am extremely new to flash and have inherited a flash file
from another designer that I need to modify the fourth Button
called gallery to About Us. I have tinkered with it for like 6
hours now and can't figure it out completely. I have changed it one
but lost the action behind it which was simply on mouse over show a
different look of it.
I am willing to send the Flash project document to someone
through e-mail to take a look at it if you can contact me at
[email protected]
Basically what is different with this menu bar for me is that
each button copies the other and changes the name of the button on
the fly as well. In otherwords it looks in the project that the
buttons all say "Home" but when I dig down deeper by Breaking it
Apart I see the text it is suppose to change it to. I just would
like to change the text but not lose any action or format.

It would help if you told us what "apple app" you're referring to...

Need to change the segment data in Inbound ORDERS05 IDOC

Hi:
I need to change sales area coming in E1EDK14 segment. I need to determine SAP sales area stored in TVARV table and pass it to the E1EDK14 segment.
I am using exit EXIT_SAPLVEDA_002. In this I am looping DIDOC_DATA and checking if segment is E1EDK14 and then writing my logic and modifying the DIDOC_DATA. I am also modfying DXBDCDATA. However the fields are properly getting populated on screen but when I went WE05 to check the IDOC the changed fields are not getting reflected in IDOC.
Please let me know where else I have to change in order to show it in IDOC.
Thanks.

Toni,
I atlast tried IDOC_DATA_MAPPER BADI and it is working fine for me.
Appreciate your help.
The following is the sample code I wrote inside the BADI.
LOOP at data into wa-data.
   CASE wa_data-segnam.
       when 'E1EDP01'.
           wa_mapp-segnum    = wa_data-segnum.
          wa_mapp-feldname   = MATNR.
          wa_mapp-value         = '000000000000115123'.
          wa_mapp-save_type = c_x.
          APPEND wa_mapp TO mapping_tab.
        MOVE 'X' TO have_to_change.   "IDOC Data have to be changed with newly determined values
        IF protocol-stamid IS INITIAL.       "Populate with atleast one value
          protocol-stamid = 'ZMM'.
        ENDIF.
        IF protocol-stamno IS INITIAL.
          protocol-stamno = '001'.
        ENDIF.
   ENDCASE.
ENDLOOP.
Thanks.

Add logic behind 'Update Opportunity Totals' button in Oracle CRM On Demand

HI,
I need to add custom logic behind 'Update Opportunity Totals' button in Oracle CRM On Demand. Can anyone please let me know where can I implement this logic? Where can I find already implemented code of 'Update Opportunity Totals' button.
Thanks,
RM

Pl post this in a Siebel related forum
HTH
Srini

I need to change logic behind Calculate Duration button in Leave of Absence

Similar Messages

Maybe you are looking for