I need to CHANGE my SAML Claims Identity Provider from Siteminder to Okta

I went ahead and got specific on the title .... but, the question is a general question actually.
I currently have SAML-provider-A.    I need to move my Sharepoint Claims Webapplication from SAML-A  over to SAML-provider-B.     I THINK that I should be able to simply remove SAML-A TIP and add SAML-B tip and as long as I retain
the same TIP-NAME - I think that my profiles shoudl not have to be migrated etc. etc.    
When I DELETE the connection for UPA - and reCREATE the connection to AD via the TIP.
My fear is that there is something that will cause the UPA to duplicate the profiles.  But, I dont THINK that'll happen.
Does anybody know?  
if my post is helpful - please click on the green arrow. (please excuse, in advance, any perceived sarcasm/humor - as I often forget it does not translate through text) :)

Hi  ,
According to your description, my understanding is that you need to change your SAML Claims Identity Provider from Siteminder to Okta.
For achieving your demand, you can refer to the steps as the guide:
https://support.okta.com/entries/55886993-Microsoft-SharePoint-On-Premises-Deployment-Guide#setup 
And  you need to associate your existing web application with the Okta identity provider and perform  IIS Reset:
http://technet.microsoft.com/en-us/library/hh305235(v=office.15).aspx#CreateWebApp
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Similar Messages

  • [svn:bz-trunk] 21285: Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project

    Revision: 21285
    Revision: 21285
    Author:   [email protected]
    Date:     2011-05-20 07:53:23 -0700 (Fri, 20 May 2011)
    Log Message:
    Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project
    Modified Paths:
        blazeds/trunk/apps/ds-console/console/ConsoleManager.as

    Revision: 21285
    Revision: 21285
    Author:   [email protected]
    Date:     2011-05-20 07:53:23 -0700 (Fri, 20 May 2011)
    Log Message:
    Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project
    Modified Paths:
        blazeds/trunk/apps/ds-console/console/ConsoleManager.as

  • SAML assertion Identity provider - SSO for ALL users

    Hi ,
    If we have  a  Corp AD configured on Windows 7/ Windows 8
    but  SAP-EP-UME is hooked up to the Corp AD ( read only ).
    Can we consider the  Active directory system(Windows ) to be the  IDENTITY PROVIDER
    and configure the SAP-EP ( portal to be the SERVICE PROVIDER) for SSO ?
    Edited by: Franklin Jayasim on Aug 7, 2010 12:47 AM

    Hi,
    I don't have any experience with AD as IdP but you can find on net that AD can be SAML 2.0 indentity provider. The question is if it's part of standard installation or there is an extra cost. SAP supports only subset of standard but I assume that it covers all basic scenarios so it should be possible.
    But if you want to play then have a look at project [Shibboleth|http://shibboleth.internet2.edu/]. It's an open source project and it supports Active Directory as identity store. I want to test it by myself with CE7.2 but I don't know when I'll have time.
    Cheers

  • For work app, need to change preferences to allow downloaded apps from anywhere.

    Currently, my preferences do not allow me to change to allow downloaded apps from anywhere (ability to do so is grayed out).   I need to download an app developed at work, so it is not on the list of approved developers.   How do I do this?

    Click the lock icon in the lower left corner of the preference pane and authenticate.

  • Need to change outgoing mail address which is from an old account

    We recently switched to a new internet service provider, but the old address is by default still being sent as the outgoing (from:) address in the Mail application. Is there a way to remove that address? The problem is not with the service provider because I have been able to check the current valid inbox address through the service provider's homepage online. The problem must lie with a setting in the computer that has retained the old address as a default.
    Any help would be greatly appreciated.

    If you're sending from the new account, that address is the outgoing mail address, by default. Did you try deleting the server of the old account? It could be sending mail out through that server instead of the one provided by the new ISP, which would change the outgoing mail address.
    Go to Preferences > Accounts and select the new account; look near the bottom of the window where it says "Outgoing Mail Server (SMTP)" and check to be sure that is set to the server provided by your new mail provider. If it's not, you need to select the correct one from the pop-down list.

  • HT204053 I need to change my account credit card details from visa to none

    Im trying to change my account payment details as I put in my bias credit card details and wish to change it back to none but will not let me

    Multiple people have the same problem for one and one reason only. They still owe something to itunes store. Settle your account and you will be able to do that.

  • Need to print sheet of multiple identical labels from one data record

    Post Author: mhamill
    CA Forum: General
    I need to print 18 labels on a sheet 3 columns x 6 rows of the SAME LABEL based on a single data record,
    I've got the label size all set but can only find a way to produce 1 label if I only have 1 record in the data.
    Is there a repeat or other function which will let me do this similar to the MS WORD Repeat label functionality?
    ThanksMike

    Post Author: SKodidine
    CA Forum: General
    Try replicatestring function.  You might have to use chrw(13) for carriage returns to make it go to the end of the label before printing the next one.

  • Dinosaur needs help changing version of this smtp llb from LV7.1 to LV7.0

    I know I am a dinosaur still using LV7.0 but if there is anyone who could help I would really appreciate it.
    Could you save the attached library in LV version 7.0?
    This is the smtp library originally from openg.org that supports SMTP authentication and has since been modified to resolve some linefeed issues and then saved as LV version 7.1
    Thanks very much!
    Bernie
    Attachments:
    OGIC_SMTP.zip ‏201 KB

    hi
    yes i can. i hope thats what you want.
    Mike
    Attachments:
    70.zip ‏164 KB

  • I need to change my printer back to english from chinese

    Hp photo smart B110a
    This question was solved.
    View Solution.

    Hi,
    Please try this.
    Touch set up icon (wrench shaped icon) in printer display screen . Then select first option which appear on your  printer screen. After  touch OK again select first option appear on printer screen. Touch OK. A list of languages will appear. Select English from the list.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HANA XS SAML Configuration - Error when saving Identity Provider

    Dear experts,
    I'm currently using a SAP HANA SP8 environment from my AWS account. During the creation of the Identity Provider, the following error message is being displayed:
    Error: PreparedStatement.setInteger: expected int for second argument, but got: string
    The error is triggered in file http://<host>:8000/sap/hana/xs/admin/logic/idp.xsjs
    The error is very easy to reproduce. Just follow the steps below:
    1. Log into http://<host>:8000/sap/hana/xs/admin/
    2. Go to SAML Configuration > Identity Provider
    3. Click on the button on the left side of the shell to add a new Identity Provider
    4. Paste the IDP Metadata extracted from your IDP on the Metadata field and click on the Parser button
    5. Add a name to your IDP Config
    6. Click on the Create button. The error will be displayed.
    Anyone has faced this problem and know how to fix it?
    Regards,
    Gustavo

    Hi Gustavo,
    I also had this error when adding IDP and I found a workaround for this. The error is due to the port in the "Base URL" field. So, before you click "Save", just remove the port number. For example, if the base URL is parsed into https://ids-test.wdf.sap.corp:443, just remove the port number which means https://ids-test.wdf.sap.corp. Save it first, then you choose this IDP and edit it, just add the port number and save it again.
    Best regards,
    Wenjun

  • Need to change MRP status from Reserved to Fixed - AFS

    Hi,
    I need to change the MRP (allocation) Status (J_3ASTAT) from reserved (R) to Fixed (F).
    transaction  - j4ab
    table - J_3ABDBS (AFS Requirement - Stock assignment) or any other table for this to be updated?
    Do any one have any idea about the Function module or any other procedure to achieve this?
    Thanks,
    Nilanjana

    Hi Nilanjana,
    Yes. You could do this using J4AB.Allocation->Release.
    In the j_3abdbs table, J_3ASTAT field would get changed from "R" to "F".
    The include is /AFS/ARUN_MANAGEMENTTOOL_FCO0Q.
    Best Regards,
    Anitha.

  • I need to change my Community name

    i need to change my community name
    Post transferred from where added to create its own new topic;
    subject/title edited accordingly.

    Hi, Jullian, and welcome to the Community,
    Unless a security or other serious need has arisen and can be explained, like a Skype Account name, your Community account "name" cannot be changed for convenience.  I realize this sounds rather harsh; is not intended to sound that way.  Before you accrue a large number of posts, consider starting a new Community account with a nick name you prefer -- if it is available!
    Kind regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Why can't I use my IPhone when it is charging? Is there a setting I need to change?

    Why can't I use my IPhone 4S when it is charging?? Is there a setting I need to change???

    markfromnewyork wrote:
    From my experiences with the same problem, I can tell you that it seems to only happen when the transformer is running on a modified sine-wave.
    What do you mean by that?  A "dirty" source of power where there are a lot of transients on the AC line?

  • Texting from my iPad shows my wife as the sender. Need to change identity somehow. May be problem with iCloud recognition.

    I've been sending texts via iMessage from my new iPad. It is set up to send from my mobile phone number as the sender. When I send a message (even to myself) it shows my wife as the sender. When sent to myself it shows my picture as the recipient. I've checked under the messages setting and it only shows my data and phone number. However under the setting menu under contact heading the " my info" has my wife's name ( on all our devices including both iPhones, iPad, iMac, etc). Even when I log into iCloud it comes up my name but shows her picture. That is why I'm wondering if the problem is with our iCloud account.  I've checked into it and only my data is included on it. W do share all our contacts via iCloud for all our devices.  I cannot figure out what or how to change it so it shows me as the sender.
    Any ideas?

    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account. You may have already done this.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • WAAD SSO Airwatch / Attribute SAML claim Role?

    Hello
    We have configured WAAD SSO with our Airwatch applicaiton. I can see that we have got a new option on the application called "Attributes" where you can add and edit the existing SAML claims. How can we add a new claim for user ROLE??
    We need to send out the list of the groups user is member of in WAAD, How can we do this?
    http://schemas.microsoft.com/ws/2008/06/identity/claims/role
    Regards,
    Maqsood.

    Hello Neelesh.
    I actually never pointed out any link, only the namespace for the Role Claim: http://schemas.microsoft.com/ws/2008/06/identity/claims/role
    Yes, the Airwatch documentation we have seen. First of al most of the things in that documentation are not correct and are outdated, and thus if someone will follow this tutorial will end up with support tickets with microsoft and airwatch without getting
    much help.
     I myself have been there and tried to figured it out how actually it should work.
    the other things is "Assigning Users", is the idea, but it looks like it only works if user first comes to the Access pannel and then to the Airwatch. The normal scenario is not like this for application like airwatch.
    User should normally go to the Airwatch first and then to Microsoft WAAD for the authentication. In this process, I guess there is a logical bug. it looks like Microsoft WAAD gives out required SAML claims without actually checking if the user has access
    to the application.
    Regards,
    Maqsood.

Maybe you are looking for