I need to change photos in exe to jpeg

i have photos in exe format, i need to change them to jpeg. any sugestions?

Hello,
Thank you for posting in HP support forum!
I am not sure what you mean that you have photos in exe format but if the photos are OK and if you manually changed them into exe (which is not common and suspicious) , you can change the file extensions following these instructions:
http://www.mediacollege.com/microsoft/windows/extension-change.html
If your photos automatically turned into exe, this may be sign of malicious activirus (virus-malware infection) and this may need further investigation and actions to cure the computer from bad mal files.
Please, let me know if this helps and if you need further help !
IT_WinSec
Best wishes,
IT_WinSec
Hewlett-Packard employee | HP Enterprise Services
Although I work for HP, I express my personal opinion.
Visit www.hp.com/makeitmatter
--Say "Thanks" by clicking the Kudos Thumb Up in the post that you find useful.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Want to change photos from bmps to JPEGs

    When I e-mail photos from my iPhone (3G), they show up as bmp files instead of JPEGs, which makes it harder to post to blogs, etc. Is there a way to change the setting on my phone so that the photos are JPEGs?

    I had a client who was sending a file from his iPhone with this same problem earlier this week. All of the attached jpg files that I have been getting this week from Mac computer users (not just iPhone), are coming over embedded as .bmp files. (I have to work on PC here at work.) So far I've been unable to pinpoint how to fix this.

  • Need to change Date/Time stamp on jpeg file

    I combine images into panoramas using PTGUI. The problem is that the output image file is date stamped as the time that I created the image. I really want the date/time stamp to be the same as the images that go into the panorama. I cannot find a way in LR to change this.
    Lee

    > By the way, Victoria, should you be promoting your url here? It belongs in your profile. It's in the forum rules somewhere and others have been picked up on it before.
    >
    > Joe
    Oh, thanks Joe, I'll change that then. I did go looking for forum
    rules, but couldn't find any!
    Victoria

  • What program do I need to change the resolution of a photo?

    What program do I need to change the resolution of a photo that is currently a low-res .jpg? I previously had photoshop, but it did not transfer to my new Mac Lion - and it is too expensive to repurchase. Curious if there is there an alternative option? I cannot open hi-res files anymore, and would love a solution. Thanks!

    Take a look at Pixlemator in the App Store

  • I used to be able to email photos from my Lightroom software quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoi

    I used to be able to email photos from my Lightroom software 5.7 for MAC quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
    I have been trying to get help from Adobe for 3 days. I have sent a message through "Get Support", 2 days ago, but no one has contacted me. I have tried by phone, but no one will help me. When I purchased Lightroom in May, 2014, I was able to receive phone help. I am now told that I don't qualify because I am not a Creative Cloud customer.   I have been assigned a case number  186291729.
    PLEASE HELP ME FIX THIS PROBLEM

    I, too, have this problem. I see no one is responding with a solution? Hello? Can someone please advise?
    Oh, and, yes, I have manually verified repeatedly that the information I gave to Lightroom is correct, and I still get the same error message when I try to validate.

  • I need to change a photo into a video file in order to post on youtube. How can I do this with my mac?

    I need to change a photo into a video file in order to post in youtube. How can I do this with my mac mini?

    When I go to import, the choices are :
    movies
    camera archive
    imovie for IOS
    imovie for HD
    It refuses to import a photo with any of these choices, which is located on the desktop or in a folder. It's a regular .jpg
    There are instructions to drag it. I put it there, and it bounces right back. The photo will not stay.
    I just need this one picture to go on so I can post a meditation on youtube.  It doesn't come from a camera.

  • Everytime I open my laptop, Lightroom tries to import photos from my hard drive. Does anyone know how to stop this?Is there a default I need to change?

    Everytime I open my laptop, Lightroom opens and tries to import photos from my external drive. Is there a default I need to change?
    Thanks in advance for any help.

    Error -36 is, as X423424X says, a generic I/O error. It doesn't say anything about what caused the error, or indeed where it occurred (source or target).
    You have to describe exactly your action when the error occurs. Is the ext'l drive you mentioned formatted as NTFS (Win default file system)? Without additional software, Mac OS X cannot write to NTFS, it can only read from it.

  • Where can i find the resolution of a photo? I need to change it to 102

    where can i find the resolution of a photo in iphoto? How can I change it to 102?  I see is the pixel  width and height, along with the mb/kb size for photo info; I need to change the resolution and size for submission.

    Short answer: the dpi (or resolution)  is set when you decide what size you're printing at.
    Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
    Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing.  Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
    So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
    For more see http://www.rideau-info.com/photos/mythdpi.html
    Regards
    TD

  • I would like to design a poster, when I place my photos on the page  under the "links" "colour space" section it says the colour space is RGB not CMYK even though my document is set up as CMYK.  Can/do i need to change this?  i am worried it will be a pro

    I would like to design a poster, when I place my photos on the page
    under the "links" "colour space" section it says the colour space is RGB not CMYK even though my document is set up as CMYK.  Can/do i need to change this?  i am worried it will be a problem when my poster goes to the commercial printers who want CMYK

    Yes, it will be a problem. Convert the images in Photoshop using the printer's color profiles or a standard CMYK profile.
    Mylenium

  • I recently changed my email address and need to change my icloud account both on my itunes and iphone. how do I do this without completely wiping the phone?

    I recently changed my email address and need to change my icloud account on both my itunes and iphone. How do I do this without completely wiping the phone.
    Also I tried to update to iOS6 and it is asking for my password under my old signin and locked me out of my phone.
    What can I do?
    Thanks

    This explains how to change your ID: http://support.apple.com/kb/HT5621.  After changing your ID you will need to go to Settings>iCloud, delete the existing account (which only deletes it from your device, not from iCloud), then sign back in with the new ID.  To avoid losing photo stream photos, save them to your camera roll before deleting the existing account.
    If you are signed into your account on your Mac, you will need to go to System Preferences>iCloud, sign out, then sign back in with the new ID.

  • I have changed my e-mail address and therefore need to change my apple ID. When I change it to my new address it says it is already my rescue address and cannot be used. Any ideas how to change my rescue address?

    I have changed my e-mail address and therefore need to change my apple ID. When I change it to my new address it says it is already my rescue address and cannot be used. Any ideas how to change my rescue address?

    To change the iCloud ID ("email address") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Ever since I downloaded the version 6.0, my youtube video's and other video's won't play and are halted. Is their a setting I need to change now ?

    When going to youtube.com in it's own tab, every video comes on to play for a few seconds and is halted with no way to play the entire video again. I can watch a youtube video in facebook but it too is kept from streaming smoothly. When editing my photos and video's offline for my camera. The software performs flawlessly on my computer as always. I run Norton 360 premium edition. no bells or whistles. I run the add on for you tube as i always have from firefox. Is there some setting i need to change now with this version 6.0? 5.0 worked fine also. When I watch a video I uploaded to weather.com now, I get flawless audio without the video to see. My 4GB Ram is peaking out running firefox now. Not sure if having many tabs left open is affecting the performance and the videos. it did not do so with 5.0 as it does with 6.0. Thanks

    Shockwave Flash 11.5 r502
    Shockwave Flash 16.0 r0
    Having more than one version of a program may cause issues.
    Grab the uninstaller from here:
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
    Then reinstall the latest version.
    Separate Issue; Update your
    Flash Player '''v16.0.0.235 http://get.adobe.com/flashplayer/'''

  • Bought a new 4s and need to transfer photos from iCloud to new device. iCloud is giving me an old @me address. I do not have the email or pw  for the iCloud account. How do I retrieve this information? Thanks.

    Bought a new 4s and need to transfer photos from iCloud to new device. iCloud is giving me an old @me address. I do not have the email or pw  for the iCloud account. How do I retrieve this information? Thanks.

    If you need to change the iCloud ID on your new phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Just bought the ipad mini, and have the 4s phone. I have synced them, but my contacts did not sync with name connected to them, and I am getting texts on my new device now, but not my phone-what do I need to change?

    How do I delete photos from ipad mini? Also getting texts to my ipad that i just set up, but now not to my 4s. I have synced the devices, but my ipad has contacts listed without phone numbers. What do I need to change?

    go to your iPhone to settings>itunes and app store> check the box which reads automatic download apps.
    This provides for you to automatically download apps and music should you choose that option.
    Click on the area that reads 'use cellular data when automatically downloading'
    Good luck.

  • Need to change report data source on reports in a copied universe

    We are setting up a new testing environment.  So I made a copy of our BO universe so we could have two different testing universes.  I then created a copy of the data source database that will be used as the data source for the reports in the copied universe.  The two different databases have the exact same tables, columns and indexes as the development database.   The only difference will be the data inside the tables. 
    I now need to change the reports to use the new universe since the reports were written using the universe instead of using the database.  I am not changing anything else in the reports.  I just need them to run against a different Oracle database. 
    So I go into Crystal Reports version 11.5.0.313 and open the report up.  I then go into Database fields in Field Explorer to change the data source.  I then go to the Set Datasource Location screen.  I open up the universe label by clicking on the plus sign and I select the copied universe.  When I do that, the Business Objects Query panel screen opens up.  Because I have switched universes, Crystal Reports wants me to reselect the columns and rebuild the query.
    We have over three thousand reports so we are trying to avoid rebuilding them.  I am looking for a better way to change what database a report runs against. 
    Note: All of the reports will be run ion demand.  Nothing will be scheduled.
    Any suggestions and information will be greatly appreciated. 
    Has anyone run into this?   What was your solution to this problem?

    Hi Joe,
    Moved your post to the Universe Forum.
    First you are using the original release of XI R2. You need to upgrade to Service Pack 6 by:
    Run License Manager first to get the keycode if you don't have it on paper somewhere.
    Then download these and uninstall then run full build first:
    https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
    https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
    https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
    Try again
    Don

Maybe you are looking for

  • Profit center wise reports

    How can we get profit center wise Trial balance P&L Balance sheet

  • Recover Datafile with Noarchivelog

    Dear all, Received a call saying the database cannot up the error message as below ORA:01113 file2 needs media recovery ORA:01110 Data File 2..... Thus, svrmgr> startup mount svrmgr> alter database datafile 'c:.....' offline drop; svrmgr> alter datab

  • Xml to client call in bpm

    Hi i have a client application which starts the bpm workflow i need to pass back an xml using xml to client action , need to know how dopes bpm do it in a synchronous mode and what all does the client need to have to accept the xml and retrun a respo

  • I18n and UTF8

    Hello. I have a problem with a web application that handles 3 languages (English, Spanish and Portuguese). The web pages are showed correctly using the fmt:message tag library. But, one of the application features is to send email notifications, and

  • "Cannot find nwlocale.dll" error when running 16-bit application

    Hi There, I'm encountering the error message "Cannot find nwlocale.dll" when activating a 16-bit application (standalone version) in a workstation using Windows 98 and Novell Client v4.83. This only happened in a particular workstation but other is w