I need to change the default network name on my iMac

I recently changed routers and my iMac keeps trying to join the "default" net work as it did in the past. That is no longer working and I need to have the default changed to the name of the new network. It keeps trying for some time (meanwhile I am not connected to the internet) and eventually the computer finds the name of the new network that works and after a long wait it works.

Open System Preferences > Network > Wi-Fi (or AirPort) > Advanced, and remove your old network from the list of preferred networks. Your computer won't try to connect to the network anymore, and it will only connect to your new router

Similar Messages

Need help changing the default Save Path

Hello,
We are implementing SAP, and will be using Citrix as the source for the GUI. One of our requirnments are, that we need to change the default "Save Path" that users save documents too. By default, this is to the C drive, but, we need it set to a different drive (i.e. V: on the citrix server).
We found this note on SDN (see below) - however, it does not explain how to change or add this registry value? Is this done in the GUI options, or in regedit? If in reg-edit, where abouts in the tree does it go?
Thanks guys, and any help would be greatly appriciated.
Richard
(As of SAP GUI 7.20, patch level 4) the REG_EXPAND_SZ registry value InitSaveDir can be used to configure the default path and folder for users to save the reported information in case of an access denial due to security rules. If users change the default path and save the information to an individual location, this new path will be kept as long as the user does not terminate the program. When starting SAP GUI again, users will get the configured default path again to store the reported information, the individual path changes will be lost. If the registry value does not exist, the default directory is the document directory of the SAP GUI.
By default none of the above registry values exists. In order to change the behavior of the security module, the registry values need to be created and set to the desired value. A not existing registry value means use the default.
In this doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/002444be-7018-2d10-e18e-a8c537198ef6?quicklink=index&overridelayout=true

Hi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh

HT2470 I need to change the home folder name. I just bought this mac today and my cousin put his name in because he had to back up his phone while we were still at the store so he could get a new phone and now my brand new imac says his name in the home f

I need to change the home folder name. I just bought this mac today and my cousin put his name in because he had to back up his phone while we were still at the store so he could get a new phone and now my brand new imac says his name in the home folder. This is very frustrating. I would not have let him put his name in there if I didn't think you could change it. Someone please help!

Delete his user account and create your own, using your name.

Changing the default file name while saving the PDF interactive form

Hi All,
I am generating an Interactive PDF form using webdynpro, but when I try to save the PDF to my local machine the default file name comes as "<b>unknown.pdf</b>" so I have to manually go and enter the name before saving it.
Is there any way to change this default name so that I don't have to manually edit the file name each time when I want to save the generated PDF interactive form?
Please reply soon.
Thanks in advance!

I am running into the same issue. Setting the desname parameter (e.g. desname=temp.pdf) doesn't have any effect. Has anyone found a solution to this?
Thanks,
Brian

Need help changing the default load page in Flash

Welcome,
I recently purchased a flash template. The one problem I am having is that the default page that starts up when you play the movie is not the page I want it to start on. It is starting on the gallery section of the menu item which is the 3rd tab and I wanted to start on the very first tab/menu item which is,About Us section. What steps would I take to change the default homepage so it opens on About Us instead of Gallery.
Here is an example. This is not my site but it's to illustrate what I am talking about. www.thunderfuel.com. It's like my webpage is starting up on the Web Design Tab, instead of the Games Tab which I want it to.
Thanks

That's why the gallery shows up first then, its first in the timeline. There are a number ways you can change this. 1. You might select the section in the timeline that you want to show first and move it to the beginning of the timeline. 2. You could add a simple gotoAndPlay() directive at the start of the movie to tell the playback head to move immediately to the section that you want to show first.

Need help changing the default download location in Firefox3.6.16

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/808920]</blockquote><br>
I have been having default download location problem for over a year now and no one has been able to offer a solution so if you can figure this out, well, I can't say enough good about you.
Here's my problem. I'm an online math instructor for a college. I use Firefox 3.6.16, and have also tried the latest version. Os is Vista. Students email me Microsoft Word 2007 documents every day as attachments to email. I click on the documents, make corrections and when I go to save their document to my computer, the default always wants to save it in a temp file! I read where Firefox is supposed to default save in the desktop (which is where I want it to default to, but that never happens). When the save defaults to the temp file, I have to scroll up numerous files and find the desktop option and click it to save it on the desktop. This is not a huge deal until you have to do it for 90 students and then it becomes time consuming.
Numerous times I have followed the standard process of (TOOLS>OPTIONS>SAVE FILES TO DESKTOP) within Firefox but that never works. I've reinstalled Firefox, that doesn't work. I've also tried to change the "Save Options" settings within Word 2007 and that hasn't solved the problem either. Please advise if you have a solution. Thanks in advance!

Hi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh

Changing the default domain name of the server.

I know this is not the correct title for the topic. but its the best word i could found on my voculabary.
here's my problem.
Im using Sun App Server 9. the server is installed in the local machine. for testing purposes client access from the local server is sufficient. I deployed a web service using net beans 5.5. My problem is that the WSDL file is generated (by server) uses a fully qualified domain name rather than localhost. for example it uses http://mlb.stdmlb.sliit.lk:8080. When i try to create a client using netbeans it tries to access the server using this address (the one in the WSDL) but the firewall denies access to port 8080. Therefore i want to use the server to use localhost rather than the long domai name. (at least http://mlb) Can anyone tell me how to configure this?
Lahiru

These are the steps for changing domain name & IP address without reinstall
a) Stop the Gateway and Server .
b) Export the profile server database to a flat ldif file:
# /opt/netscape/directory4/slapd-host_name/db2ldif /temp/profile.ldif
c) Use awk, perl, or vi, to change every instance of the system domainname in the ldif file to that of the new system.
d) Import the edited ldif file into the profile server on the new machine:
# /opt/netscape/directory4/slapd-/ldif2db -i /temp/profile.ldif
e) edit etc/opt/SUNWips/platform.conf and change all the domain name & Ip address
f) edit /etc/opt/SUNWips/properties.file change the domain name
g) Start the platform server and gateway on the new machine.

How can we change the default site name to custom title in sharepoint desginer from email

i have a site name human resource
i am using sharepoint desginer workflow to send alert on a list
it is giving from email as site Name "Human Resource"
i want to change from title of it to the some custom name like HR Customer care
rather then site name
MCTS,ITIL

I don't think this's possible OOB but there is a codeplex freeware tool you can install and change Sender address as you wish.
Here it's: Change Address
Hope this helps!

Need of changing the default stack size permanently as reported by ulimit -

Hi All,
In order to install proper 11gr2 on solaris 10 I need to make change of stack size permanently.
My current ulimit -s is 8192 but according to the oracle 11g installation docs (Configure Shell Limits) they recommend you change the value reported by ulimit -s to be 32k (or 32768).
I can change this value usiing "ulimit -s 32768" but after reboot of sever this value alwayes change back to old value(8192).
I tried to do that in /etc/projects but not able to make this permanent, How to make stak size permanently in solaris 10.
I am on ...
Oracle Solaris 10 8/11 s10s_u10wos_17b SPARC

Hi;
I suggest please review:
http://serverfault.com/questions/21417/how-to-set-ulimits-in-solaris-10
It seems that parameter will lost after server reboot. SoThe above settings are not permanent and will be lost after the reboot of the server. To make the changes permanent you need to set this in the respective user profile file. (For ex : .bash_profile on linux)
Please review:
Connecting Using: sqlplus "/ as sysdba" Fails with ORA-12547 with Lower Ulimit Setting [ID 878375.1]
Regard
Helios

New mac user need to change the main account name

Hi....I bought a used imac to try before switching to mac.....I liked it and ordered a new imac....when first booting, it gave me the option to migrate from my old imac via firewire, which I did....
The new imac now has the previous owner's name as the primary user which shows up as the little house symbol under the places column in finder.....I've previously set up my own name as another user but I can't seem to find a way to get rid of his name and get mine in there....
I like the macs but sorely miss my right-click button BTW.....

Choose Log Out from the Apple menu, log in with your account, and then use the Accounts pane of System Preferences to change the automatic login setting, and if desired, delete the migrated account.
(27134)

I need to change the default email address that gets sent from Firefox.

When sending emails from an important web app (Highrise) for my business, it defaults to my home email, when my default in Outlook is clearly my work email. I believe this is the fault of Firefox, since every app (Highrise and Outlook) has my default as [email protected], but when sending an email it goes to [email protected] Any ideas?

Could you be more specific about the steps you are taking to change the Adobe ID? I was able to change one of my accounts to a .ca email address without issue. Also, information on Browser version and OS may be helpful. I am assuming that you are doing this in a Browser and not the FormsCentral AIR application, is this correct?
-Jeff Canepa

How do I change the default bookmark name for my iWeb site?

I'm not sure where the label is coming from that automatically appears as the bookmarked name for my iWeb site and I want to change it.

I found my answer in the archived discussion "Bookmarking my site". It worked - thanks!

Need to change the default apple id in my iphone 4s

my grandson was showing me how i could share his icloud photos and now i'm trying to update some apps and its showing his apple id instead of mine. But i cant find where to change that back. Does anyone know?

For iTunes & App Stores:
Settings > iTunes & App Stores > Apple ID
For iCloud:
Settings > iCloud > check the account name. If it isn't your tap the delete account button at the bottom

The name of my home network changed, now I cannot sync my ipad as it is looking for the old network name, can I change this?, the name of my home network changed, now I cannot sync my ipad as it is looking for the old network name, can I change this?

The wifi sync button is greyed out and it says that I will be able to sync once connected to <previous network name>
How can I change the default network I use?

go to,
Settings > Wi-Fi > select your new network name and join the network (by entering the password for it)
you should now be on your new network
For completeness, you could delete your old network by,
Settings > Wi-Fi > click on your old network name > Forget Network
I hope that this fixes things for you.

How to change the default element tag using dbms_xmlgen

here is my code that generate output for purchase order data. I followed the syntax shown in xml db developer guide.
I am getting the results but element tags are CAPS letters( As the coloumn names in the type defenitions are stored in CAPS in Oracle). but I need to show in small letters as per my requirement.
can anyone help me how to change the default tag names for elements.
==================================HERE IS THE CODE==================
DECLARE
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
BEGIN
qryCtx := DBMS_XMLGEN.newContext
('SELECT PODL_H_T
( CLOSEDDATETIME ,
COMPANY ,
CAST(MULTISET
(SELECT LINENUMBER ,
COMPANY ,
PURCHASEORDERID ,
ITEM ,
QUANTITYUM ,
TOTALQUANTITY
FROM cpo_wms_podl_LINES
WHERE PURCHASEORDERID = PH.PURCHASEORDERID) as PurchaseOrderDetailList
FROM cpo_wms_podl_HEADERS PH ');
-- now get the result
DBMS_XMLGEN.setRowSetTag(qryCtx, 'Receipts' );
DBMS_XMLGEN.setRowTag(qryCtx, 'PurchaseOrder' );
result := DBMS_XMLGEN.getXML(qryCtx);
INSERT INTO temp_clob_tab VALUES (result);
DBMS_XMLGEN.closeContext(qryCtx);
END;
-- select * from temp_clob_tab
===========create type script=====================
cpo_wms_podl_HEADERS
CREATE or replace TYPE PurchaseOrderDetail AS OBJECT(
LINENUMBER VARCHAR2(400 BYTE),
COMPANY VARCHAR2(400 BYTE),
PURCHASEORDERID VARCHAR2(400 BYTE),
ITEM VARCHAR2(400 BYTE),
QUANTITYUM VARCHAR2(400 BYTE),
TOTALQUANTITY NUMBER
create type PurchaseOrderDetailList as table of PurchaseOrderDetail
create table temp_clob_tab(result CLOB)
create type podl_HEADERS_list_t as table of podl_HEADERS_t
CREATE or replace TYPE PODL_H_T AS OBJECT
CLOSEDDATETIME DATE,
COMPANY VARCHAR2(400 BYTE),
CREATEDDATETIME DATE,
PURCHASEORDERID VARCHAR2(400 BYTE),
SHIP_TO VARCHAR2(400 BYTE),
linelist PurchaseOrderDetailList
)

but I need to show in small letters as per my requirement.add alias column names in double quotes as in
SQL> select dbms_xmlgen.getxmltype('select dname "DeptName", loc "Location" from dept') dept_xml from dual
DEPT_XML
<ROWSET>
<ROW>
    <DeptName>ACCOUNTING</DeptName>
    <Location>NEW YORK</Location>
</ROW>
<ROW>
    <DeptName>RESEARCH</DeptName>
    <Location>DALLAS</Location>
</ROW>
<ROW>
    <DeptName>SALES</DeptName>
    <Location>CHICAGO</Location>
</ROW>
<ROW>
    <DeptName>OPERATIONS</DeptName>
    <Location>BOSTON</Location>
</ROW>
<ROW>
    <DeptName>SALES</DeptName>
    <Location>MUNICH</Location>
</ROW>
</ROWSET>
1 row selected.

I need to change the default network name on my iMac

Similar Messages

Maybe you are looking for