I need To change the order status

Hi Guru's,
My application Version:11.5.9base
My database Version:8.1.7.4
In Order Management Super User--->Order organiser
one Of my order Line Item showing status fulfilled. But status Is already Closed.
Can you tell how to change the Status to Closed.
regards,
***SBJ***
Edited by: user13098774 on May 16, 2011 1:51 AM

Hi
In Oracle Order Management, I have ship confirmed a order, the order line status is staying at 'fulfilled' status and is not getting to 'Closed' status.
please Give M e any answer .
Regards,
***SBJ***

Similar Messages

  • Possible to Change the Order Status

    Hai
    When i am booking the sales order the status is showing the Booked is it possible to change the Booked status according to the customer requirement ....
    thanks in advance
    M.Meenashi Sundaram

    Hai its possible to change the order status from the
    setup>quick codes>order management>
    type --flow status
    we can able to change it
    thanks
    M.Meenashi Sundaram

  • Need to change the system status in CRMD_ORDER

    Hi,
    The status of the deffect is set to "Relase Items" in crmd_order. Now if i try to do any changes it is not allowing me to change. Is there any way to reset the system Status .
    Your help is appriated.
    Regards,
    Srilu.
    Edited by: Srilu.M on Oct 15, 2010 8:32 AM

    hi
    refer this thread, the same scenario
    [Re: CRMD_ORDER - Status|Re: CRMD_ORDER - Status]
    jansi

  • Need to change the Idoc Status based on the Text in the Idoc

    Hi All,
    I have developed Idoc--SOAP Sync Process Scenario Using BPM and Works Perfectly.
    I have used STATUS.SYSTAT01 Idoc to capture the Response that is comming from the Webservice.
    I have mapped the response Text( Success or Fail) to one of the field in the Response Idoc, this is perfect.
    Requirement:
    1) If the Response Idoc Field receives Success Text means the Idoc Status shld be in Green Status.
    2) If the Respnse Idoc Field Receives FAIL means the Idoc Status shld be in RED Status.
    How can i Do this. please suggest me......
    Regards

    Hi Santhosh,
    YES, I have to Capture the Response from Webservice in SAP R/3 by using STATUS.SYSTAT01 Idoc.
    I have mapped the response from webservice to the one of the field in the Idoc.
    If this field contains Success as text means the Idoc Status in We05 shld be 53 else it shld be 56
    With out changing the FM code, can we use any other process to achieve this???
    @ Mario
    Can u please Allobarate your views more based on my requirement
    Regards

  • Is it possible to change the user status of a TECO Order

    Hello Folks
    Is it possible to changes the user status of a TECO Order?
    I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
    On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
    I need to change the user status from NFBK to FBK.
    Please provide some inputs for the same.
    Thanks n Regards
    Ramesh

    The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

  • How to change the IO status to CLOSE after it has been settled through ko8g

    hi ,
    I have the following scenario : An internal order is assigned to a PO and after setllement of such an order i need to CLOSE the order .
    The PO has a GR done (no IR) . Currently Internal Order is in the status : TECO [technically complete] and setlement has ben doneusing Actual Settlemnet Run using KO8G.
    Now i need to change the IO status to  [ CLOSE ] : it is gving an error in KO02 : Balance is not zero .
    How  to change the Internal Order status to CLOSE or rather how to make teh balance in that Order toZero?
    Is it reqd to process some GR's for teh same PO ?
    Thansk
    Trina

    Hi,
    Check the order balance in Ko02
    Menu -->  Extras  -->  Order Balance if balance exist it means that the order has not completely settled.
    Regards,
    Raj

  • Change the transaction status when creating a follow up activity

    Hello All
    We need to change the activity status if a follow up document is created from. E.g. If an activity is created type 001  then a follow-up activity type 003 as a follow up document from 001 the system automatically changes the activity status from open to in process. I need detailed steps regarding how to reach this
    Regards
    Jacopo

    See if you can "exploit" CRM_COPY_BADI and function modules CRM_STATUS_CHANGE_EXTERN to change the User status or CRM_STATUS_CHANGE_INTERN for System status.

  • Unable to change the order quantity value during save of sales order

    Hi Experts,
    There is a need to change the order quantity value, based on some conditions, when pressed 'ENTER' or during 'SAVE' of the sales order (VA01, VA02).
    We are trying to change the order quantity value (KWMENG) in table XVBAP in the subroutines userexit_field_modification, userexit_save_document and userexit_save_document_prepare of the user exit 'MV45AFZZ'. But the change is not replicated to field on GUI.
    The order quantity value can be changed in subroutine 'userexit_move_field_to_vbap', but the subroutine is not getting triggered when user changes only the order quantity on screen.
    Please help us in resolving this issue.
    Regards,
    Santosh

    Thanks for your time guys. The issue is resolved.
    SAP is not triggering the vbap user exit as the order quantity on screen is in structure RV45A.
    There are two ways of resolving the issue.
    1. Implement the SAP note #513342 - Quantity change and USEREXIT_MOVE_FIELD_TO_VBAP. But, it is SAP modification note.
    2. Write the code in VBEP exit of MV45AFZZ. This user exit is called whenever the order quantity is changed. But, it is called multiple times in some cases. Hence, need to write code to limit our code execution only once e.g. maintain a global table with our quantity & uom. Check when the quantity and uom in our table is same as quantity on screen. If not, exit from user-exit.
    Edited by: Santosh Kacham on Nov 11, 2011 6:37 AM

  • I am making a slideshow in imovie, how do i change the order of my photos once i have imported them?

    I am making a slideshow in imovie (first time). I imported all of my photos, but now i need to change the order of the photos.  How can i do that?
    Thanks a bunch!
    John

    not quite sure if i understand. here is where all my pics are. but i can seem to move them around

  • Related Topics: Is it possible to change the order of topics?

    Hi,
    Is it possible to change the order of Related Topics? I need
    to change the order of topics (that is, I don't want the topics
    alphabeticized.)
    Thanks,
    FMnRH

    Hi FMnRH
    Yes, you may change the order. If you have already inserted
    the control, double-click it to edit it. Then click the Topics tab.
    Click to select the topic you wish and below that, the area lists
    the topic name. The field is labeled "Title". So you click in the
    field and prefix the title with 1. or 2. to force the order you
    want.
    If you don't wish to prefix, you will have to manually edit
    the HTML code. But it is possible.
    Cheers... Rick

  • How can I change the ordering of the parameters listed under the Labview module?

    Is there anyway to change the ordering of the parameters listed in the parameters table under the Labview module tab in TestStand?  Each of these parameters printout in my report, but I need to change the ordering of the parameters in the report.  Thanks.

    Hi,
    There is not a way to manually change the order of the parameter values in the Code Module Parameters Table, but there are a few options for configuring the report ordering of these parameter values.
    Option 1: Use the Additional Results in the Properties tab to add a Custom Result. You can then save the parameter values to these custom results and order them they way you desire. This ordering will be reflected in the report.
    Option 2: You could use a Post Action in the Properties tab to swap the parameter values that are saved to Locals.ResultList[0].AdditionalResults at run-time. This would require the use of a local variable to serve as a temporary placeholder for one of the values in order to successfully swap the values.
    -Adri
    Adri Kruger
    National Instruments
    LabVIEW Product Marketing

  • How can I change the order in which photos are presented on an Apple TV?

    I am showing photos on my Apple TV via my Apple MacBook, iTunes and Home Sharing.
    That all works nicely for me, except that I wish to change the order in which a few photos
    are being presented.  How can I change the presentation order on the Apple TV?

    Welcome to the Apple community.
    You'll need to change the order in iPhoto. Open the album you wish to re-order, manually sort them to the order you want, then use the time and date and batch change options as applicable from the photos menu to retag your photos.

  • Change the ordering unit for a group

    Gurus,
    I need  to change the ordering unit for a particular group of materials using the mass changes in material master . The problem here is it is not showing the ord UoM in the selection field. ?

    hi
    pls follow this:
    1.Go to MM17
    2. Click on fields
    3. Search for MARA-BSTME
    You will get ordering unit.
    GANESH....

  • TO change the user status in the PM order

    Hi,
    My requirement is that a techician is assiged to do the work using MRS and based on that user status is update in the PM when the save button is clicked on the MRS board.
    Now according to my requirement if anybody click on the save button and the technician is assigned to do the operation is done through MRS than the User status in the PM order should get changed.
    As a part of standard functionality the user status is not updated.
    A new user status is created in the trasaction BS02.
    Can anybody please let us know how to achieve this functionality
    Thanks
    Mohit

    We had a similar requirement and this is what we did :
    1) Set up a task as a reciever for the WORKORDER SAVE event.
    2) In this task called a method of a business object.
    3) In the method called STATUS_CHANGE_EXTERN to change the user status.

  • I am running Itunes 9 on Tiger. Everytime I try to edit my credit card number, it says "session timed out". I need to change the card number in order to purchase music. Also, I lost the last 2 purchases. Can I download them again without a charge?

    I am running itunes 9 on Tiger. Everytime I try to edit my credit card number, it says "session timed out". I need to change the card number in order to purchase music. Suggestions?
    Also, I lost the last 2 purchases when I backed up after a hard drive crash.  Can I download them again without a charge? Newton

    Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.

Maybe you are looking for

  • Photosmart 5510d wireless connection problem

    Photosmart 5510d  Mac OS 10.7.5 The printer is connected to my network and can access the internet (I can browse the app store). My computer has access to internet on the same network (I can post this message). I cannot see the SSID of the printer Wh

  • Where clause and order by to DAO classes

    Hi Is it ok(I mean design wise) to pass the 'where clause' conditions and order by clause as a parameter to the method of DAO class?

  • Multiple column table

    Hi obiee experts, I am new to obiee and reporting itself. I have requirement to create a table as follows: for-each GROUP_NAME DATE SHIFT_NAME PERSON_NAME NUMBER_OF_HOURS For clarity, I am adding two sample records, GROUPNAME : IT 02-FEB-2012 0900 15

  • Preparing to send iMac back for replacement.

    I am planning on sending my iMac back for my replacement tomorrow and I have everything I need backed up safely. I want to erase the hard drive before I send it back and have read the instructions on how to do so. I have the OS X install cd's and I p

  • I want to see the group on the contact card

    Hi, Is there any way to see--on the contact card-- the groups that a particular contact belongs to? Is there a plugin that adds this functionality?