I Need To Change The Resolution In A Graphic Without Changing The Graphic's Size

I am trying to make a banner for a parade, and am stuck because the banner company can't print my design. I made my design with two different layers. I have a black layer which is 8 inches by 2.5 inches high, and the logo graphic which I have copied and pasted from the place which wants me to use this logo in the banner. This graphic has way too low of a resolution, so I tried to change it (It is 4 inches by 1.5 inches). I made the resolution of the first layer (the 8 inch by 2.5 inch) at 1000. I took the graphic and copied it and make it at the same resolution. However, when I tried to copy and paste the smaller graphic, it wouldn't let me paste it into the 8 inch by 2.5 inch layer. I got the message that the graphic was too big to paste into that layer. But the measurements for that are still the same; 4 inches by 1.5. If I could really keep that measurement at a resolution of 1000, it would work. What am I doing wrong this time? Thanks.

First of all, there's no point in going over 300 ppi, since the eye can't detect any difference beyond that level. The answer here is still the same as it was when you asked back in June:
Can't change image size
So you would need to set the bottom layer to the resolution you want. However, 1000 ppi isn't going to look better than 300 or so.
and in re your other threads, PSE doesn't do vector graphics.

Similar Messages

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
I am also providing you with a screenshot of what appears! I need photos on my iPad2
Message was edited by: angana

You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

When I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

when I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

Hi fabiangs,
I'm not sure that I follow. Are you saying that when you open a PDF file in Acrobat or Reader, that the display resolution changes automatically on your system?
What version of Acrobat/Reader are you using? Do you see this same issue in other files/applications?
I look forward to hearing back from you.
Best,
Sara

How to edit the cube with new fields without changing historical in BI 7.0

HI,
I have requirment that need to edit cube with new fields and without changing historical data on it.
Please some one can advise me abt the above scenario.
Note:I am using BI7.0

hi Krish,
In BI 7.0,
we cannot add a characteristic to an existing dimension if the data is not deleted from the cube.
It can go to a new dimension and that will not change the existing structure of the cube tables, but will just add to it (as another dim table). or use remodeling.
for more details, please seach threads.....
with hopes
ARS

In CVI !!!! How to dynamic change BaudRate of RS232 Serial COM Without closing the Port !!!

Dear all:
I want to change the buadrate of serial com without closing the serial com, but it failed when I use the function "SetCommConfig(m_hCom, &Com_cfg, Com_cfg_S) " to reset the buadrate ,baudrate is no change when use GetCommConfig to read back the value.
Appreciated all of your advice . TKS!
Code with WINAPI as beloow:
CreateFile(..) ;
GetCommState(..);
dcb.BaudRate= 1000000 ;
SetCommState(..);
//......do other things
//change baudrate to normal without closing port .
GetCommConfig(m_hCom, &Com_cfg, &Com_cfg_S);
Com_cfg.wVersion = 0X100;
Com_cfg.dwProviderSubType = 1;
Com_cfg.dcb.BaudRate =9600 ;
Com_cfg.dcb.StopBits =1 ;
SetCommConfig(m_hCom, &Com_cfg, Com_cfg_S);
GetCommConfig(m_hCom, &Com_cfg, &Com_cfg_S);
Solved!
Go to Solution.

This topic has been discussed some years ago: see here. Please note that even if I made that sample program which changes the baud rate without closing the port, I never used it in a real situation: you'll need to made your tests and check if this solution can satisfy your needs in the short and long term.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?

My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?

BigTex415,
my condolences for your family’s loss. If all she seeks to do is to change the display name, and she’s willing to leave the account name unchanged, then she could do the following: log in as the administrative user and open the Users & Groups pane of System Preferences. If the padlock in the lower-left corner is locked, unlock it. Select the account that shows your brother-in-law’s name on the left-hand side of the window, and then on the right-hand side, change the text in the “Full name” textbox to her preferred display name. If desired, click on the padlock in the lower-left corner to relock it.

How can I rearrange the pages in a PDF without changing the assigned paged numbers.

How can I rearrange the pages in a PDF without changing the assigned paged numbers? These correspond to the original document folio numbers.

In theory it would be possible to 'record and play back' the page numbers using a folder-level script, but it's far from trivial. You would have to use the doc.movePage() function - presumably driven by a dialog box - to do the page shuffling so there was a way to track what was being done, then swap the page 'labels' of the two affected pages. That's where it gets messy.
We have functions in the JSAPI which can read and write the page label, but they don't do things in a logical way. The 'getPageLabel()' function simply returns a string, but the 'setPageLabel()' method expects to be told the numbering scheme, prefix, etc. You'd have to parse the string and work out what scheme it was implementing.

I rebooted my Iphone 5S, when I pressed the home button to enter my pass code the resolution must have been reset. The font size is so large I can not enter my pass code. How can I resolve this issue?

I rebooted my Iphone 5S, when I pressed the home button to enter my pass code the resolution must have been reset. The font size is so large I can not enter my pass code. How can I resolve this issue?

Triple click Home.
After you get into the iPhone, Settings > General > Acessibility and set Zoom to Off.

My i-touch music is interrupted by voice memo. the music also fast forwards, changes tracks or stops and starts without touching the i-touch

my i-touch music is interrupted by voice memo. the music also fast forwards, changes tracks or stops and starts without touching the i-touch. can you help?

Try the standard fixes:
- Rest. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defauslts/new iPod.

How can I increase the tempo of a song without distorting the vocals?

I have a song I recorded, with the vocals and backing track on seperate tracks.
The song has been recorded a bit too slow, and I need to increase the tempo. However, when I do this, the vocals become distorted and have a wavy sound.
Is there any way I can increase the tempo of the song without distoring the vocals? I've tried doing it on the final song (merged tracks) and on the vocals alone, but nothing seems to work. It doesn't make sense, since when you do the same thing to a song by a professional artist, you can increase the tempo of the song without distoring the vocals.
What am I doing wrong? How can I increase the tempo of my song without distoring the vocals?
Any help would be greatly appreciated.

in general GB doesn't do such a great job with changing tempo of audio recordings, what you might find works better is to export your song uncompressed and then use an audio editor:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to change an audio clip's speed without changing pitch

is there a simple way to change an audio clip's speed without changing the pitch in FCP? thanks

Can't do it inside FCP, but you can in Soundtrack Pro.
Another option is Amazing Slow Downer http://www.ronimusic.com/

In iPhoto, I want to copy certain photos in an event and then have the copies in another event WITHOUT removing the original photos from their original event; how to do that?

in iPhoto, I want to copy certain photos in an event and then have the copies in another event WITHOUT removing the original photos from their original event; how to do that?

The only way to do that is to export the image to a new file and then re-import it.
It's not really the intended way of working as it uses twice the disk space and is inefficient.
Use Albums instead. A Photo can be in any number of albums and use no extra disk space as it just simply references the image in the Library. Albums can be sorted any way you want - including manaually - and can have image from anywhere in the Library just by drag and drop.

How can i find out the last 5 numbers dialed without having the phone

how can i find out the last 5 numbers dialed without having the phone

log into your myverizon account,go to detail useage

ODDC upgrade 10.3.5.0 to the 10.3.5.1 without upgrade the ODC 10.3.5.0 ?

Hi I want to ask if is possible to update the Oracle Distributed Document Capture from the 10.3.5.0 to the 10.3.5.1 without upgrade the Oracle Document Capture 10.3.5.0.
The ODDC and the ODC can be have different versions ?
thks!

Both versions should be same.
Please check below note
Can Oracle Document Capture be Installed on the Same Server as Oracle Distributed Document Capture? (Doc ID 1270565.1)

My user doing the direct posting in MIRO without useing the PO

Hello Exports
My user doing the direct posting in MIRO without using the PO.
but after posting in MIRO, its picking up the R ( invoice Verification ) in Payment block field. and also i ve check in Vendor master there is no "R" Falg in Payment block field.
Can any body give me suggestion on the same
Thanks and Regards
sudharshana vamsi

Thanks for all
The probelm was solved
Regards
vamsi

I Need To Change The Resolution In A Graphic Without Changing The Graphic's Size

Similar Messages

Maybe you are looking for