I need to change the time zone without changing appointment times individua
I have moved back to Nairobi from London and need to change the default time zone on iCal. However, when I do it changes the appointment time.
Is there any way I can say 'from this point on, I am in a different time zone, please don't change the times of my appointments and get the alarm times right on iCal and when synchronising with my iTouch'.
1) you have to do it for each event.
2) as for time display: go to system preferences>date&time and select 24-hour clock rather than am/pm, then go to system preferences>international>formats>times>customize, then customize the short, medium, long and full to show the 24hr setting - also remove the AM/PM of course and drag whatever field is appropriate as in hour, minutes..
hope this helps
Similar Messages
-
HT201303 How do I change the security questions without changing my password?
When I am trying to buy something from the iTunes store it askes me two security questions. I know what the answers should be but they do not seem to match what Apple has. So, I tried to change the questions but now it also wants me to change teh password. I don't want to change the password. How can I eitehr find out my answers or change the questions without changing a password I obviously know!?!?!
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
Can I change the Column Name without losing data and change the sequence
Dear Experts,
I want to change the column name without changing the sequence and dont want lose the data.Oracle Version : ?
Example Based on 10g.
SQL> conn scott/tiger
Connected.
SQL> create table col1 as select * from all_objects where rownum <= 100;
Table created.
SQL> alter table col1 add constraints col1_pk_objid primary key(object_id);
Table altered.
SQL> desc col1
Name Null? Type
OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(30)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_ID NOT NULL NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED DATE
LAST_DDL_TIME DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)
SQL> alter table col1 rename column object_id to object_no;
Table altered.
SQL> desc col1;
Name Null? Type
OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(30)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_NO NOT NULL NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED DATE
LAST_DDL_TIME DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)
SQL> column column_name format a30
1 select column_name,constraint_name
2 from user_cons_columns
3 where table_name = 'COL1'
4* and owner = 'SCOTT'
COLUMN_NAME CONSTRAINT_NAME
OBJECT_NO COL1_PK_OBJID
SQL>
also go through
http://www.dizwell.com/prod/node/65
Message was edited by:
user52 -
Is it possible to change the read/write permissions on a time machine back-up of iTunes? I'm needing to restore it as my phone deleted half our playlists during sync & am not seeing a way to unlock the permissions. I have the current version unlocked, but can't seem to get the backed-up version. When I click on restore I get a pop-up that says iTunes can't be deleted as it is part of the OS. I'm not even trying to delete, just restore the old version. Any suggestions?
Hmmm, ok I'll give it a shot. I've always had the iTunes sync w/ my phone set up to only load selected playlists to the phone b/c there's a lot more in iTunes than I have room or desire for on my phone. A few months back I started having trouble w/ trying to sync everything & subsequently adding more to the phone than it could hold. The quickest thing at the time was to unclick the sync music option in iTunes so I could still backup the phone to the computer & not have a problem.
When I asked about it during one-to-one session shortly after, they advised me to delete the music off my phone & then re-sync it to the computer, run a backup of the phone & redownload the music to the phone. When I tried this it ended up deleting all my playlists (but not my husband's) from iTunes. Irritating, but I've been rebuilding the playlists since. I had also unclicked sync music again & an Apple person told me the most likely best fix was to delete & reload iTunes completely.
A few days ago I realized I hadn't backed up the phone to the computer in over a month so after deleting & reinstalling iTunes, & w/o changing anything (sync music was STILL unchecked) I ran a backup & my phone went from having 4 GB free space to being 2 GB over capacity due to iTunes trying to download the entire music library to the phone. I made a one-to-one appt again & it was suggested AGAIN that I delete all the music off my phone & then resync it to the computer & redownload the music. We did this (though a few random songs that had previously been purchased somehow remained on the phone), I got home, connected the phone & instead of the music that shows as 'on my device' disappearing from iTunes it just sat there, so, as the guy had told me I MIGHT have to do, I threw all those songs showing in iTunes as being on my phone, in the trash so that it was completely clear.
At this point I checked sync music, made sure the options were 'selected playlists only', checked the ones from my own list that I wanted (I usually have one playlist of comedians from my husband's folder that I also have on the phone, but didn't check it at this point). It uploaded all my stuff just fine, but for whatever reason when it saw that I wasn't uploading that comedy playlist any longer, it not only didn't upload it but proceeded to delete my husband's entire folder of playlists from iTunes. -_- I got on the phone w/ an Apple support person right away but he wasn't able to tell me anything .. basically said we'll have to rebuild everything. I asked about the possibility of using time machine, he said he's not qualified to answer that, so that's when I started looking around online & found, among others, the link I referenced a couple replies ago.
I hope this all makes sense. It's been a long-term issue so I'm trying to go from memory as I figured to begin w/ that I had just made a mistake somewhere, so didn't try to document anything. Now w/ it having happened a 2nd time, I'm not sure if it was 'user error' or something else....... -
Changing the default Zone AAM in SharePoint
SharePoint Web App Provides 5 different Alternate access mapping Zone.
What is the best practice, is it the good practice to change the Default Zone of Web app in AAM.Hi Maruti
At its most basic level, AAMs are configuration settings set in SharePoint Central Admin that tells SharePoint how to map a web request to the correct web application so that SharePoint can respond with the correct content as URL of a web request received
by IIS is not the same URL that the end user entered in their web browser
Best Practices
Default and Intranet should always be used, the rest are of course optional, but whatever naming convention you use, be consistent!
Default: always the FQDN in the form of “http://WEBAPP.Company.com” (or “http://WEBAPP.domain.local” – whatever
your FQDN format happens to be )
Intranet: Just the name of the webapp itself in the form of “http://WEBAPP” It is important to use a single
name, without any “.”s in the name, as some windows applications will see “.” in the address and will assume “Internet” zone for the address, which can lead to some interesting authentication issues with Microsoft Office applications.
Internet: Almost always prefixed with "WWW” in the form of “http://www.WEBAPP.Company.com” – this identifies
the access URL as a public facing or externally accessible site.
Custom: I have never used this field for anything more than specialized one-off URL testing and sometimes for SSL
cert verification (which generally should go on the load balancer anyways)
Extranet: Every company will be different, but I like to use the “PARTNERS” prefix, in the form of "http://partners.WEBAPP.Company.com”
Amit Kotha -
Ess Leave Request -Change in Time calculation without changing work schedu
Hi All,
We are implementing a ESS Leave Request in EP6 with backend HR ECC5.0.
The time calculation is taken from the Work schedule rule in
HR backend which is 24*7.
For example if the leave taken is for 2 days-systems calculates as 24*2=48 hrs
but in actual the requirement is to calculate 2*8 =16 hrs without changing
the Work Schedule in 2001 infotype in HR Backend.
Can we do this change through
1.Validation in portal itself
2.Changing the RFC PT_ARQ_REQUEST_CHECK
3.Changing the Absence Types
Regards
Anand.Hello,
Please use:
programming
but without the spaces before and after } and {
Testing:
programming
regards
Rick Bakker
Hanabi Technology -
IWeb: changing the slideshow image scale and viewing time
I moved my iWeb sites over to another server (iPage) and went through the sites to observe for inconsistencies and problems. While doing this, I noted that my image galleries, when placed into the slides show mode, were very small on my iPad 2 and that they cycled through at a very high speed. I thought this was odd and I wondered if anyone else has observed the same thing? It sounds to me that an HTML under-the-hood modification may be required or a bug fix to the iWeb code is in order, to change the sideshow image scale and viewing time/slide value. Comments? [I suspect that Apple does not hold iWeb bug fixes at or near to the top of its software development to-does priority list. Sounds like I need to change web authoring software.]
Why do you think it's a bug?
Anyway :
Is there any reason photos in an album page display small on the iPad, but normally on an iMac? And videos on a movies page don't play on the iPad, but are OK on the iMac?
I use my own show :
http://home.wyodor.net/photo/ -
Oracle WebLogic Server (WLS), Time Zones, and DayLight Saving Time (DST) Changes
Hello,
We are approaching this time of the year again...
I would like to redirect you to the Support Note 1370083.1 "Oracle WebLogic Server (WLS), Time Zones, and DayLight Saving Time (DST) Changes"
This note lists what is to be expected from WebLogic Server regarding this time change period, in terms of behavior, both for the engine and the applications deployed onto WLS.
Regards,
Patrick.Probably this:
http://www.jdocs.com/castor/0.9.5.3/api/org/exolab/castor/xml/handlers/DateFieldHandler.html -
Changing the RunAs account without reinstalling Workflow Manger
For SharePoint 2013 installation, I need to change the RunAs account.
is it possible to change the RunAs account without reinstalling Workflow Manger/SB Manager without complete uninstall? Even if I remove all servers from the farm, seems like the RunAs account is always in Management db, so RunAs account is pre-populated
with the old account.
Thank youTo change the RunAs account of the Service Bus, use following PowerShell commands:
Stop-SBFarm
Set-SBFarm -RunAsAccount Domain\Username
$RunAsPassword = ConvertTo-SecureString
-AsPlainText -Force
'<password>'
[RunOnAllNodes] Update-SBHost
-RunAsPassword $RunAsPassword
Start-SBFarm
Then open the Service Control Manager and navigate to Workflow Backend Service and change manually the account.
Restart the Wf Service.
Damir Dobric
developers.de
daenet.de
daenet.eu
daenet.com -
Changing the security zone in EP6 SP9
Hi,
could anyone tell me if it is possible to change the Security Zone of an object without redeploying it?
(in NW04 SR1 : EP6 SP9)
Thanks,
Stuart.Just guessing here, but I think this isn't possible. If it were, it could be a major security issue.
-
I have changed the name and password for my Time Capsule and now the Time Machine will not connect
Mac Book Pro
1TB Time Capsule.
Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
When I enter the time machine preferences it shows as below that there are no back ups.
Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
(And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).Simply reset the Time Machine.
See A4 here http://pondini.org/TM/Troubleshooting.html
You can then mount the TC disk in finder after you reboot the computer.
You should be able to reselect the TC disk and then it will say it is going to start a new backup.
Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
Please also install the widget A1 so you have some idea what TM is doing. -
Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?
You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway... -
Hi
I have started migration système to transfert from hold Macbook pro to New MacBook air
Application starter successfully for several hours.
But since more than 3 hours I got the message "transferring Time zone paramètres " with time left less than 1 minute.
Any recommendation or suggestion to solve it ?
Many tanksIf it has run for 3 hours it's probably done and you can quit Migration Assistant and reboot the new computer. In the future rather than using Migration Assistant I would recommend using Startup Assistant which tends to be a bit more reliable and does not create a new user account as MA does. If you're interested here is an article explaining Setup Assistant tips.
Roger -
Change the Transportation zone - No jurisdiction code could be determined
Dear All,
when trying to change the Transportation zone for the customer of Brazil ,
Error message comes as : No jurisdiction code could be determined
Message no. TAX_TXJCD101
Even you change a single character in the address any where e.g. Name, City, Postal code- The same message comes.
Please advice
Thanks in advance,
RanjanIn other words, your address is currently incorrect according to your tax jurisdiction determination.
You surely have a tax jurisdiction engine like Vertex and your Vertex (or other) database is not maintained properly.
As a result the determination, from the maintained element of the address, fails.
Or simply, your current address is incorrect according to your determination engine.
You may have a look to your settings in the customizing first.
SPRO / and start find engine with 'Tax Jurisdiction' as key word.
Feel free to provide points if useful. -
OBIEE 10 - Is Possible change the Presentation Variable without GO BUTTON ?
OBIEE 10:
Is Possible change the Presentation Variable only changing the Value on the prompt ??
Or the presentation variable only change if click on "GO BUTTON" ????
Thanks.You need to click the "Go" button. That is what sets the variable.
Maybe you are looking for
-
Hi In BP sales area data Fact sheet tab when I select the view BW BP master data the following error is showing. Why this is error is coming can anybody help me??? Rendering ERROR XML parsing error (3006) in 67102328[stream], line 5, column 14: inval
-
ICloud on atv2 and ipad remote has suddenly stopped working. I noticed it only after upgrading my modem to vdsl. (Fritzbox) I've tried reentering all my itunes/icloud info. Help?
-
How to render image from binary property of node?
Hello! How to put the image to the page from binary property of node in cms? How tags can i use?
-
I am japanese living newzealand ,today I changed from NZ App Store to Japanese App Store ,I just need to find out a few things . And then I changed APP store From Japan to New Zealand. When I looked my account ,I lost Nz Dollrs from my account. I had
-
I've upgraded my system to Lion and want to upgrade my iTunes to 10.5 and it states I need to, but when I check for software updates it reads that everything is up to date??? Any suggestions?