I need to completely remove WebRoot from my Macbook Air and cannot. Please point me in the right direction
I have purchased another security system for my Mackbook Air and my required PC. I now cannot remove Webroot security from my Mac. It responds to me that I do not have "the authority.....", cannot because "it is in use elsewhere", etc. I am using Finder and when I ask to move the application, Finder asks me for my authority password and acts like it is doing the job, but up pops the reason (above) why I can't. I'm not an experienced user of the Mac product but like it a lot. Hopefully, someone can give me a hint. Thanks in advance!
rmb
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
You may have to log out or reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
Similar Messages
-
Question: Need advise about new computer (OS Win8.1) to run CS6 - please point me in the right direction Thanks
OSX comes with Xcode. Install it and see what you think. You can write both Java and Objective-C. They both have a particular syntax that is quite different from VB. Try to use them to write a HelloWorld program and see what you think.
Apple has come a long way in integrating Java into their development environment. Still, it was designed around Objective-C, so that might be more of a "pure" MacOS X development experience. -
How do you download airplay to your iphone and where is the software located?
There is no download.
AirPlay is built into iOS.
Swipe up from the bottom of your screen.
if you don't see the AirPlay icon -
Hi, can anyone tell me how to remove tibsearch from my macbook air, i have tried removing the plug-ins as suggested etc, but nothing seems to work.
ThanksDid you turn off extensions, too? Safari Preferences > Extensions tab
-
How can i remove MacKeeper from my macbook air?
How can i remove MacKeeper from my macbook air?
Remove "MacKeeper" as follows. First, back up all data.
"MacKeeper" has only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
☞ Quit MacKeeper before dragging it to the Trash.
☞ Don't empty the Trash. Let MacKeeper delete itself.
☞ Don't try to drag the MacKeeper Dock icon to the Trash. -
what can i do if i accidentally deleted my iPhoto from my macbook air and the App Store couldn't recognize that i have bought it before and required me to buy it again ... should i buy it again or what ? i can't manage my photos now ...
Log into the app store using the Apple ID you used to set your computer up. Look under purchases. If it is not there you may need to accept it or to unhide it
LN -
i accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu. -
I am trying to record a meditation from my Macbook Air and an annoying loud sound, like a burp, will suddenly erupt from the MacBook, necessitating I start again. Any ideas on how I may stop this, or what it is??
Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data. -
Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.
I have Final Cut Studio V1 - the PPC/Intel V5/5.1 cross-grade version, which would suit your requirements perfectly. (I have it for sale at present down here).
If you keep looking, you're sure to find a similar second hand copy in your area, without the need to upgrade your graphics card.
I'd go for Final Cut Pro as above over any version of Express. FCP has the full version of LiveType - not the truncated version that was released later on. -
I need better performance from my computer. Could someone point me in the right direction?
I do a lot of video editing for work. I am currently using the Creative Cloud, and the programs I use most frequently are Premiere Pro CS6, Photoshop CS6, and Encore. My issue is that when I am rendering video in Premiere Pro, and most importantly, transcoding in Encore for BluRay discs, I am getting severe lag from my computer. It basically uses the majority of my computer's resources and doesn't allow me to do much else. This means, that I can't do other work while stuff is rendering or transcoding. I had this computer built specifically for video editing and need to know which direction to go in for an upgrade to get some better performance, and allow me to do other work.
For the record, I do have MPE: GPU Acceleration turned ON, and I have 12GBs of RAM alloted for Adobe in Premiere Pro's settings, and 4GBs left for "other".
Here is my computer:
- Dell Precision T7600
- Windows 7 Professional, 64-bit
- DUAL Intel Xeon CPU E-2620 - 2.0GHz 6-core Processors
- 16GBs of RAM
- 256GB SSD as my primary drive. This is where the majority of my work is performed.
- Three 2TB secondary drives in a RAID5 configuration. This is solely for backing up data after I have worked on it. I don't really use this to work off of.
- nVidia Quadro 4000 2GB video card
When I am rendering or transcoding, my processor(s) performance fluctuates between 50%-70%, with all 12 cores active and being used. My physical memory is basically ALL used up while this is happening.
Here is where I am at on the issue. I put in a request for more RAM (32GBs), this way I can allot around 25GBs of RAM to the Adobe suite, leaving more than enough to do other things. I was told that this was not the right direction to go in. I was told that since my CPUs are working around 50-70%, it means that my video card isn't pulling enough weight. I was told that the first step in upgrading this machine that we should take, is to replace my 2GB video card with a 4GB video card, and that will fix these performance issues that I am having, not RAM.
This is the first machine that has been built over here for this purpose, so it is a learning process for us. I was hoping someone here could give a little insight to my situation.
Thanks for any help.You have a couple of issues with this system:
Slow E5-2620's. You would be much better off with E5-2687W's
Limited memory. 32 GB is around bare minimum for a dual processor system.
Outdated Quadro 4000 card, which is very slow in comparison to newer cards and is generally not used when transcoding.
Far insufficient disk setup. You need way more disks.
A software raid5 carries a lot of overhead.
The crippled BIOS of Dell does not allow overclocking.
The SSD may suffer from severe 'stable state' performance degradation, reducing performance even more.
You would not be the first to leave a Dell in the configuration it came in. If that is the case, you need a lot of tuning to get it to run decently.
Second thing to consider is what source material are you transcoding to what destination format? If you start with AVCHD material and your destination is MPEG2-DVD, the internal workings of PR may look like this:
Convert AVCHD material to an internal intermediate, which is solely CPU bound. No GPU involvement.
Rescale the internal intermediate to DVD dimensions, which is MPE accelerated, so heavy GPU involvement.
Adjust the frame rate from 29.97 to 23.976, which again is MPE accelerated, so GPU bound.
Recode the rescaled and frame-blended internal intermediate to MPEG2-DVD codec, which is again solely CPU bound.
Apply effects to the MPEG2-DVD encoded material, which can be CPU bound for non-accelerated effects and GPU bound for accelerated effects.
Write the end result to disk, which is disk performance related.
If you export AVCHD to H.264-BR the GPU is out of the game altogether, since all transcoding is purely CPU based, assuming there is no frame blending going on. Then all the limitations of the Dell show up, as you noticed. -
I have a macbook air, and an Iphone 4S, as well as an Ipad 2. I have many pictures that I was just now sending to my "Icloud free 5 gig" I noticed a comment that stated that Photo will delete the oldest files after 30 days so as to manage size?? I don't want to have that happen, I want to put them there and leave them there. I don't want the cloud space deciding which pictures shoudl be dumped. . .
Am I overlooking or misinterpreting something? I mean I am pretty concerned and if that is the case, I want to pull them back down or whatever and have them stay on the individual devices. . .I figured it would be free space that I could delete if I wanted to, not arbitrrarily by a date and some unknown valuating system of measure. . .
Thanks,
Dave
PS Still can't get my arrow keys to go back, or up kinda a pain..if I empty my music from my old computer will I lose all my music on my new computer - ipod etc...
No. Be sure you have transferred the entire contents of your old /Home/Music/ folder.
Create a new user account on your old computer. Have your granddaughter tell you what she would like the username to be and what password she wants. Be sure to set the new account with Administrative authority. Then log into this new account and delete your old account. -
I do not have particulars on the controller, but I am sure it's an NI chassis
and NI regular controller that has a serial cable leading back to the PC.
I am making this PXI rack into a debug rack for instrument cards,
so I need to be able to remove power from just the PXI chassis
and then replace the card with another one
or the same one and then turn the power back on and restart a
diagnostic test on the card WITHOUT
having to reboot the PC.
Is there a PCIe bridge setup that would allow me to do this?
Is there software that I need that can accomplish this?Yes
The Chassi is a NI PXI 1045
and the controller is a NI-PXI-8331
Let me re-enumerate my requirements:
Background:
I have a number of NI cards as well as other manufactured cards in the system.
One of these cards in the NI system is considered to be a UUT.
That is, I am using the NI card cage system and other cards in the system to test a CARD
during a manufacturing test of said UUT CARD.
The UUT uses a PLX 9030 for it's PCI interfacing.
This UUT is not designed for hot swap, and I do not bieleve it is plug and play.
Requirement:
1. I need to be able to shut off the chassis and remove the UUT when the test finishes, replace the tested UUT
with a unknown UUT, re-apply power and then test the new UUT WITHOUT having to reboot the PC.
I have tried several things, such as disabling the PCIe busses in the windows control panel, and then removing power
replacing the UUT with the next one, re-applying chassis power and then re-enabling the bus and SOMETIMES it works.
I need a very robust way to do this.
I also bought a CHROMA PXI-52906-E extender card with bus switches on it, so that I can remove power to the UUT
without shutting off the chassis. The card is supposedley designed so that when power is re-applied to the UUT, the necessary
signals to boot the PXI PCI interface is conducted, but I think something else has to be written to the card's PCI registers.
I am by no means an expert in PCI/PXI,
but I seem to have exhausted all of my reserach online in how to meet my requirements.
Perhaps there is a way for the NI8331 controller to capture PCI configuration data to the card's on system boot,
and then "replay it" to my UUT after I re-apply power to the UUT?
Or perhaps PLX makes such a tool?
Any ideas? -
I accidentally download Xcode on app store of macbook air. I paused the download. Now I want to remove it from my mac. Anyone could tell me how to deal with this problem.
ThankThank you so much, I have fixed it. Another issue I need your help that how to delete an application from the purchase of the app store. I installed it, now I don't use it. I want to remove it, not hide it.
Thank you again. -
Hello apple support community! I'm trying to download my music purchases from iTunes onto my old Mac Mini. It runs OS 10.4.11 and doesn't have the capacity to upgrade to a newer OS. When I ask iTunes to check for available downloads, it says there are none. I have tried updating the iTunes software (version 9.0.2) but it can't connect to the server, even though I am on a wireless network. I've tried using home sharing and file sharing with my macbook air, but neither are working. Grateful for any suggestions!! The only thing I really use this mini for is music, so really hoping to be able to get my music purchases on there. Thanks.
Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!
-
Photo transfer problems
Where did you get the photos from. Were they in the camera roll, or were they ones that were synced to the phone from the computer?
Maybe you are looking for
-
Document not updated in consolidation(urgent issue)
Hi all actually we are posted one document in 2006 at the time its generated accounting document.but its not generated in consolidation document.now any option to generate the only consolidation document. Thanks&Regards Satish 09892421477
-
Vbios request for R9 270X Gaming 2G
Dear mods/admins of the MSI forum. I'd like to make a request for the following serial number S/N 602-V303-03SB1309076636 For further analysis and helping comments: mboard: ASUS M5A78L-M USB3 [Bios latest official] psu: BeQuiet 650M cpu:
-
I lost all Lenovo programs like idea touch 3.0 and e.t.c.How can i get them back.Please help me.
Hello!Can you help me Please, I have my Lenovo B520 idea centre i made upgrade till windows 8 and back to windows 7 but i lost all Lenovo programs like idea touch 3.0,Lenovo SplitScreen , Lenovo VeriTouch,Lenovo Eye Distance System,Lenovo Dynamic Bri
-
Mounting and unmounting drives
Do you have to un-mount an external firewire drive in OS 9 like you do with OS X? Normally in OSX you unmount the drive before powering it down. Does the firewire drive auto mount when you connect it in OS 9? I run OSX but my Dad still uses OS9.2 and
-
To add more fileds on XD01 on sales
Hi, I want to add one more fileds Customer group1 in the tr code XD01, if u press buttton sales area data we get tab sales.There I want to add one filed Customer group1. Can anybody suggest me how to do ? Thanks