I need to configure my Time Capsule with a Ruckus wireless...

Hi people, i need your help to solve this problem...
I need to configure my time capsule for first time with one Ruckus wireless...
If you can...could you please give me the solution?
Thank you all!

Time Capsule is designed for ethernet connection.. it is not really good without it.
There is a single option to join wireless network.. hidden and unused as it should be..
On a windows version you will have to hold down the alt key i think when you click the options for wireless mode.. it will then offer join a wireless network.
It is super slow.. and subject to easy corruption of files.. it will turn off all wireless AP and routing and ethernet functions.. good luck!!

Similar Messages

How I can configure my Time Capsule with my mobile me?

Someone know how i can configure my Time Capsule with my mobile me?... Because i need access to my documents remotely, from any place where I find...
(sorry my bad english)

I think you're referring to the Back To My Mac feature?
Follow these three articles. Most important are the second and third.
http://www.apple.com/mobileme/features/mac.html
http://support.apple.com/kb/ht1109
http://support.apple.com/kb/HT3486

Configuring my Time Capsule with a Comcast modem

Configuring my Time Capsule with a Comcast modem. I had an outage and the time capusule had a pop up that said change something, I did, didn't fix the problem, but now I can't get wireless networking, but the MacPro connected by ethernet works fine.

Redo the setup.. press and hold the reset for about 10sec and redo it.
This time set wireless using simple name, no space and pure alphanumeric.
Lock the wireless channels as that also helps.
Wireless on an old Gen1 can get pretty tired.

Installing Time capsule with U-Verse Wireless Network

Hi all,
I am not a techy, but I get by. I am going to install the Time Capsule and I realized that I don't think this will work with my existing U-Verse Fiber wireless network. After some thought, I believe I should just use this for wireless backup and peripheral operations rather than the internet as my current wifi also operates the televisions in the house.
I'm hoping to get some guidance from the community as to how to use this device without having to purchase more equipment or re-wiring my entire home. Can I just plug it in and use it for wireless backup or will it interfere with my internet service (which I am happy with)?
Any thoughts?

Welcome to the discussions!
You are correct to allow your existing setup handle internet connections.
The simplest setup would be to configure your Time Capsule to "Join" the wireless network created by the U-Verse router. Your computers will be able to backup via wireless assuming that you have a good connection.
If your U-Verse router provides ethernet ports for devices (it likely does), you would also have the option of connecting the Time Capsule to the U-Verse router with an ethernet cable. This would make sense if the Time Capsule will be located near the U-Verse router as ethernet is both faster and more reliable than wireless.
Not to get too technical here, but if you connect the TC this way, you will set Connection Sharing on the TC for "Off (Bridge Mode)".
If you connect the Time Capsule via ethernet, you would also have the option to setup the Time Capsule to "create" its own wireless network. So, you would have two wireless networks available...one created by the U-Verse router and the other created by the Time Capsule.
If you have computers capable of wireless connections at "n" speeds, they could connect to the Time Capsule and your other "g" devices would connect to the U-Verse. In fact, if you purchase a new dual band TC, it will be capable of creating two wireless networks on its own.
So, you have a number of options available. Just depends on how simple or complex you want things to be.

How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

Time Capsule with an established wireless set up

I am trying to advise a colleague with the following set up:
A Macbook pro connecting wirelessly via a Netgear DG834G modem/ router.
She would like to add a Time Capsule to this combination with the following criteria:
Keep the DG834G as the wireless provider, but add the Time Capsule with Time Machine to wirelessly back up the Macbook Pro and also utilise the spare USB connection for an Epson printer.
Is this a logical set up and are there any particular pitfalls? Can she start with an Ethernet connection to do the initial Time Machine back up? Any advice would be greatly appreciated.

She would like to add a Time Capsule to this combination with the following criteria:
Keep the DG834G as the wireless provider, but add the Time Capsule with Time Machine to wirelessly back up the Macbook Pro and also utilise the spare USB connection for an Epson printer.
Like the AirPort Express Base Station (AX), the Time Capsule (TC) can be configured to join an existing wireless network as a wireless client. As a wireless client it will both continue to perform as the destination for Time Machine backups and act as a printer server for a single or multiple (using a USB hub) USB printers.

Configuring Apple Time Capsule with Netgera DG834N modem

I'm configuring a wirless system with:
a 3 year old Netgear DG834N modem / router set to modem only mode
a 6 month old Apple Time Capsule
a new Netgear WNDR4500 router
Previously I'd linked the ATC in bridged mode to the DG834N with the latter in modem + router mode and all was fine with no conflicts between the ATC and DG834N.
Questions:
what is the best mode for the ATC now that it links to the modem only mode DG834N?
do I need to run each on separate non-conflicting channels for both 2.4Ghz and 5Ghz bands?

OK.. sorry I should have twigged with the TNZ.. pppoa is a b pain in the nether regions.. that should get through all the apple filters for language.. but privately I would fill it out with the aussie slang version. In Australia all our ISP use pppoe and some allow pppoa as well. You cannot bridge to pppoa.. the nature of the beast is that it has to happen on the modem.. ie the ATM interface.
There are tricks to get around it.
1. Obviously just use the modem router as your main router.. that solves the problem but as a router,, it is lousy. Netgear build all their modems with minimal interface. And it is slow.
2. Since you cannot do full bridge you can use half bridge.. this used to be common but not so much now. It has some issues with dynamic IP and lots of linux based routers spit the dummy. (almost everything is now linux due to free source). Look up the 834N if it is possible to do half bridge and give it a try .. Maybe with DGTeam firmware.. there are alternative firmware to some netgear models since the netgear one is so devoid of functionality. Other modems do support it.. it is not gone but well down the list now. (FYI: the problems with half bridge is the IP rotates but the client doesn't have the IP updated until the local lease time expires... so lease is set to ridiculously short times to compensate. )
3. DMZ.. this is double NAT but without a lot of the bad effects.. A router in dmz of another router simply passes all packets both ways as if it is a bridge. The problem is speed.. packets only go as fast as the router can handle them.. Adsl aint that fast so it isn't an issue that way.
More importantly, you are still filling the NAT table of the modem's router, so it can fall over with too many connections.
4. There are two tricks but Netgear would have to be replaced. Also the router has to support pptp to pppoa relay. Not sure if the WNDR4500 will but it is used by dd-wrt if that is possible. Pain to setup but very solid.. Thomson speedtouch and later models all support this. You make the connection to the modem via a pptp tunnel..which is able to pass the authentication.
The Draytek also support a trick using pppoe to pppoa relay.. look at models like 120.. This is different to the above but using a similar trick. (There are a few other brands to offer it but you can see draytek have specialised in it.. it is common issue in uk which is a big market for them.)
http://www.draytek.co.uk/products/vigor120.html
Note specific reference to apple routers.
5. One to One NAT.. this is true NAT.. what is normally referred to as NAT is NAPT. One public address to many private addresses. True NAT is like DMZ.. it does pass through the router.. but all packets are simply passed from one public to one private IP.
This mode is available on speedstream models like 4200.. 6520... bit ancient now.. but they worked really well. Most people looked at the interface and had no idea what NAPT and NAT stood for. And Siemens wasn't bright enough to explain it.
Thomson has it.. but hard to setup. Draytek have most modes although not tried in their modems.
That probably covers the field.
Most people resign themselves to 1.
I wouldn't bother with netgear forum.. but look at forums for your Telecom NZ and look at solutions people are using to run a router behind the pppoa authentication problem.

How to configure Airport Time Capsule with IP Camera?

I have recently switched from a DLINK Router (DIR-655) to the latest 3TB Airport Time Capsule. The ATC works great, super fast etc...
However...
I had an IP Camera (Trendnet TV-IP572-WI) connected to my DLINK Router, using a Dynamic DNS account (dyndns) to access if from outside my home (i.e. from the Internet). The configuration on the DLINK was quite straightforward. (Virtual Server)
Question: How to do the same with Airport Time Capsule ? I had a look at the detailed settings menu in the Airport Configuration Utility. but cannot find anything like this (Virtual Server, Port Forwarding etc...)
Many thanks for your help !

What is the make and model number of your "modem"?
Most modems these days are actually modem/routers or gateway devices....which would require that the port forwarding be done on the "modem"....not on the Time Capsule.
If you did not see any settings for DHCP Reservations and Port Settings when you looked around in AirPort Utility, this indicates that the Time Capsule is likely configured to operate in Bridge Mode.......and it is your "modem" that is actually the router for the network.
Open up AirPort Utility again, click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the window
Check the setting for Router Mode.......which is likely set to "Off (Bridge Mode)"
Is it?

I need to setup our time capsule with an arris cable router

We have an existing 1st Gen Time Capsule but have moved. We went from Verizon Fios to CableVision Optimum Online.
The cable modem is an Arris TM822G plugged into the the WAN port of the TC. I can connect to the cable modem via ethernet and that works.
The time capsule flashes yellow and can't get an IP address but, my MacBook Pro sees the SSID
We use this for Time Machine backups and don't want to lose what we have.
Any ideas? Couldn't find any from CableVision.

Do a factory reset of the TC.. this seems to be necessary to get it going again in a new setup, especially with cable.
Also your TC is probably in bridge mode.. the reset will put it back to router mode.
Does the cable modem have a battery backup or phone service? Sorry I don't know the exact model.. anyway you need to shut down the modem.. if it is battery backup, drop out the battery or unscrew the coax cable. It can sometimes take 15min or more for the system to reset. when you plug in another device it will take the public IP. So the first device that connects captures the IP.. that has been your computer.. now you have to get the TC to take it over.
A reset of the TC btw will not harm data on the disk.
Reset methods here.
http://support.apple.com/kb/HT3728
After full 15min.. (you can try one minute to start).. power up the modem.. wait 2min and then power up the TC.

Time Capsule with existing Roadrunner wireless modem/router?

My ISP is Roadrunner extreme, and the modem is also a router with built-in n wireless. I don't have admin access to the router so cannot disable the wireless. I would like to get a Time Capsule for wirelessly backing up mine and my wife's Macbooks (plugging drives into laptops is a pain).
I'm concerned by the apparent assumption that a Time Capsule will also serve as your router, though. As I said, we already have wireless and are pretty much stuck with that. Can the Time Capsule wireless router function be disabled, or ignored, and have it still function for wireless backups?
Thanks in advance.

...and this discussion seems to indicate I could also skip the ethernet and just have the TC join my existing wireless network.
That's an option. There's an upside and downside to every type of configuration. The upside is that you can have the Time Capsule physically removed from the same area where the router resides. The downsides are that the configuration can be difficult and frustrating unless you know exactly what type of security the Roadrunner wireless is using.
In other words, you have to "tell" the Time Capsule exactly how to join the wireless network provided by the Roadrunner router. If the settings are not exactly correct, you'll get nothing but repeated error messages. You have to start all over to try the configuration again each time there is an error. Since you said that you don't have "admin" privileges for the Roadrunner device, you may not be able to access the device to "see" the exact settings that you need.
The ethernet ports are not enabled on the Time Capsule when it is configured to "join" a wireless network, so you will not have an option to backup using ethernet if want to do so. Ethernet can be 4-5 times faster that wireless and comes in really handy for the first backup when Time Machine makes a complete copy of your computer.
Followup question as this will drive what TC I buy: I already have a WD 2TB USB drive I've been using for backups. Can I get away with buying a smaller/cheaper TC and plugging in the extra drive? Are there reasons that's not as good as just getting the 2TB TC?
You can connect the WD drive to the USB port on the Time Capsule. The drives must be formatted in Mac OS Extended (Journaled) if you plan to use Time Machine to backup. The main problem with changing locations of drives (I'm assuming that that you had the WD attached directly to a computer) is that Time Machine will want to make a new complete backup of the computer if you connect the drive to the USB port on the Time Capsule.
In other words, Time Machines treats backups to an "external drive" connected directly to a computer differently than it does backups to a "network drive" connected to the USB port on the Time Capsule. You won't be able to "continue" backups where you left off. Time Machine will start all over again.

What is the best way to set up my time capsule with Existing Uverse

Hello,
I have read through some of the threads regarding the co-existence of Uverse and a time capsule. But it all seems very advanced to me. Here is what I'm wanting to do.
I currently have Uverse. I have the box in my living room attached to a wall outlet, via Ethernet. I have 3 TVs, all with Uverse boxes. Wirelessly, I have several devices connected to the Wifi at any given time. An iMac, 2 iPads, a MacBook Air, 3 iPhones, Apple TV, an XBox and 2 smart TVs.
So my Uverse Wifi pretty much stinks. It's not bad right in the livingroom where the box is, but in my bedroom and office it's pretty poor. When I try to watch Apple TV in the bedroom I end up watching a lot of spinning as it waits to connect:(
I was told at the Apple Store that a time capsule could help with that in addition to creating a back up of my computers. Excellent! So I purchased it. But here is my issue. My main iMac, the newest computer with the most up to date software, is in my office. But my Uverse equipment is in the living room with the TV. So do I have to hook up an Ethernet cable to both the Uverse AND my computer from the Time Capsule? Because they are rooms away from each other:( Is ther any way someone can take me through this step by step like setup for dummies?:) I would be so grateful!
Thanks!!

So do I have to hook up an Ethernet cable to both the Uverse AND my computer from the Time Capsule?
I'm not sure that I understand everything that you want to do and where devices will be located.
The Time Capsule must connect to the "main" Uverse router using a permanent, wired Ethernet cable connection. An Ethernet cable can be run up to 300+ feet with virtually no loss, so you should be able to locate the Time Capsule wherever you want.....unless you have a very large estate.
If you want the Time Capsule to strengthen the wireless signal provided by the Uverse router, then the Time Capsule must be located in the area where you need that additional signal strength.
If I understand your post correctly, you plan to install the Time Capsule in the office? When you do this, you can configure the Time Capsule to create a wireless signal that uses the exact same wireless network name and password as the Uverse wireless network.
That will provide a much stronger signal for your Uverse wireless network in the office area. Hopefully, the bedroom that you mention is close to the office, so it will pick up the stronger wireless signal from the Time Capsule.
The iMac in the office can connect to the Time Capsule using another short Ethernet cable connection, or the iMac can connect using wireless. A wired connection is always preferred, if possible.
At this point, I guess the first question would be.......
Do you have a location for the Time Capsule that will be close to the office....and...the bedroom where you want a stronger wireless signal?

Time capsule with airport extreme

Good afternoon,
I'm trying to figure out how to configure my time capsule with my airport extreme and with all the rest as described below (see: "toys"). But the information I've gathered is somewhat dubious.
So I'm hoping someone can help me out.
My "toys" are: TimeCapsule, AirportExtreme, iMac, iPhone 4s, iPad, AppleTV, 2 laptops, a kidstablet and a PSVita.
And naturally this was/is all wireless and that seems to be a bit of a problem because if everyone is using the wifi-signal it says bye-bye.
The configuration I have in mind is:
modem --- wired --- timecapsule (wan???) --- wired ??? --- AirPort Extreme --- wired (???) --- iMac
and then everything else wireless
Is this a good configuration? Can I do better?
And do I have to change some of my settings in the process?
Already a big thanks in advance !!!

do I put the wire in to the WAN port of the timecapsule
Yes
and from the TC to the APExtreme LAN to LAN
Recommend LAN on the TC to WAN on the AirPort Extreme for consistency, although it does not really matter in this case.
and from APExtreme LAN to iMac?
Yes
The settings are latin for me so I haven't touched any of the settings
If you power off and disconnect the AirPort Extreme, is the TC wired to your modem now?
If yes, do things appear to be working OK with the Time Capsule and modem?

How do I configure my Time Capsule to use ethernet?

Over my Wifi, the estimated backup time is 72 days so guessing an ethernet cable will be substantially faster but don't see a place to configure the Time Machine/Time Capsule interface to default to an ethernet connection. Anyone know how???
Thanks

In most cases, once you connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule, you are automatically setup for backup over Ethernet. Nothing else is required.
The exception would be if you configured your Time Capsule to "join" your wireless network using wireless only. In that case the Ethernet ports on the Time Capsule are not enabled, so backup over Ethernet woud not be possible unless you reconfigured your Time Capsule in a different manner.

Best way to configure Time Capsule with Thomson TG782T modem(Telstra)

Hi there
I am looking for the best way to configure my Time Capsule. I have an ADSL connection and use a Thomson TG782T wireless modem from Telstra as my internet connection. It is plugged into my iMac via ethernet. It also provides a wifi connection for iphones, ipads etc.
I also have a Time Capsule and am looking to use it to extend the wireless network. It doesn't seem to want to do this for me. I am guessing that the Time Capsule needs to be in bridge mode, but don't want it to create its own wireless network. Does this make sense? Any help gratefully received.
Thanks!

I also use TG782T.. although I hacked it to use on non-telstra ISP.. and so I can access voip.
But you cannot use TC to extend the wireless .. sorry that is not possible.. the Thomson is actually way behind and the only service it offers to extend is WDS and with WEP security.. so unless you plan to use G wireless and WEP .. don't even think about it.
Bridge the TC and plug it into the Thomson. Create a wireless network of identical name as the Thomson.. actually the Thomson uses a silly name.. just change it to something short and sweet.. TG782T would be excellent. You can also lock the wireless channel instead of auto and use the highest level possible security with your own password.. again not the Telstra one..
so you end up..
Now run the same settings on the TC.. go to the wireless page.. set to create a network and use same name.. same security level same password but different channel.
Your client computers will now connect to whichever device has the stronger signal.. this is called roaming network.

Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
Ingo

Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended.

I need to configure my Time Capsule with a Ruckus wireless...

Similar Messages

Maybe you are looking for