I need to connect a eMac - power mac 6,4 -PowerPC G4 (1.1) to the internet wirelessly running mac osx 10.4.11.
I need to connect a eMac - power mac 6,4 -PowerPC G4 (1.1) to the internet wirelessly running mac osx 10.4.11.
Can anyone advise me please. I have done some research and think a USB adapter is the best option as I doubt the eMac will be able to take a card but the software will have to be able to run on tiger.
Check this one out:
http://eshop.macsales.com/item/NewerTech/MXP3802NU2C/
Might be an idea to ask them for confirmaion that it will work with your Mac, but it should do!
Similar Messages
-
I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
-
I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!
BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 800 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.3.3f2
Serial Number: XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host> -
hi, i bought a irig to connect my guitar on my macbook pro 2012, but when i use the irig in my mac, it doesnt recognize, so i cant choose it on preferences of sound, what can i do? (the sound of my guitar goes by IRIG but I can not hear due to feedback and when I try to record another track on the garageband, the sounds recorded on the new track is catching the sound of another track recorded)
Turn the internal mic level off. Use headphones as monitors.
-
Cannot connect to the internet from my MAC on WRT160Nv2 - no problems connecting from my PC
Hi,
I have just bought a WRT160Nv2, but I am having problems connecting to the internet from my MAC (a powerbook with OS X) when I connect to the router wirelessly. If I try from my PC the Internet works fine. Also if I connect the MAC directly to the routers LAN port, the Internet works.
When I connect wirelessly from the MAC I do get an IP adress, and I am able to access the routers web configuration page. I can also see that the correct DNS gets assigned, so I am low on suggestions to what could be the problem.
Currently I have the router set up to WPA2 encryption, but I have tried different settings, e.g. no security at all with the same result.
I just tried upgrading to the newest firmware (WRT160Nv2_v2.0.02_008), also with no luck.
Also I should mention that the MAC can connect to other wireless connections without problems, e.g. my previous ZyXel DSL router.
Any ideas to what could be the problem?
Thanks,
RasmusWell maybe WPA2 Security is not compatible with Mac so change the Security mode to WEP or WPA and prepare security key of 10 digit password and while connecting to the wireless network on Mac type a $ sign first followed by the 10 digit passoword and it should work.
-
Every time I try to connect to the Internet my Mac always makes the Wi-Fi turned off and we have lots of iPads and iPhones and they are fine when we try to use them but as soon as I my Mac it doesn't work. When we have a PC try to connect to the Internet nothing happens but when I try to connect to the Internet with my Mac the Internet turns off
See:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]] -
I am trying to connect to apple support and it keeps asking me to put in the SN of my MAC and when i do it says that the SN is invalid I am putting in the SN from about this mac and it is the same as the one on the bottom of the MAC any ideas ?
Did you purchase this product direct from Apple online, in an Apple Store, or through a third-party authorized reseller? Or did you buy it from an original owner whose Applecare plan was supposed to be transitioned to a new owner, by them?
Do you have an original shipping carton the unit arrived in?
If the product was a retail 'open carton' purchase and no
back-track is possible, contact the reseller.
And if the computer had seen a major service with logic
board replaced, etc, it may have other issues with serial
number vs one they may have assigned it. Usually a
new logic board may have the SN flashed or if a unit
was determined to be a reman, a new # assigned. But
that would appear in System Profiler, if officially reman.
If you registered a product anywhere with Apple, it would show on a web page along with its serial numbers, going back several years, at this page after you log in there.
https://getsupport.apple.com/GetproductgroupList.action
A blue text with triangle See all products and services opens an Apple ID
sign-in window, then the page changes to show your items & info about them.
If you run the serial number through online Lookup, what appears?
http://www.powerbookmedic.com/identify-mac-serial.php
Not sure if this helps, 'your product' should appear - if registered.
Good luck & happy computing! -
I can't get Itunes to connect to the internet on my Mac Pro, my Ipad, or my Iphone I have tried all the suggestions listed does anyone have any suggestions?
ThanksTry this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
http://support.apple.com/kb/ts1827
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Connected to network but unable to connect to the internet wirelessly
I recently installed a new hard drive in my dell inspirion e1405 laptop and I can no longer connect to the internet wirelessly using the WRT54G v2. When I use ethernet it works. It says I am connected to the network. I punched in the WEP key and I am connected. I power cycled my cable modem, laptop and router several times. I followed these linksys suggestions:
Checking the IP Address of the PC
Checking the Wireless Settings on a Linksys Router
Disabling Computer's Firewall
Disabling Proxy Settings
Pinging the Router
Pinging the Internet
and it still isn't working. I downloaded the firmware and that did not work. I am using XP MCE 2005. I updated the driver for my dell wireless card several times and also deleted it from the device manager and rebooted. Still nothing.
Anyone have an idea?Well, hope this might help
make sure you only get IP from the router's DHCP. yes, you must set Obtain IP Address for all network adapter on your notebook (wired and wireless). the basic is, all things will be fine if this IP issue is not around. coz, at behind, they do something more than give / got IP, such as creating routing path automatically. that which will be guaranteed the success of ethernet communication for wired and wireless.
i cannot guess your problem, but you might want to do this.
first, as above said, just Obtain IP Address, make it for both adapter on your notebook
second, wireless security, must talk in same way (SSID, Channel, b/a/g/n) and use same key (WEP or WPA, passphrase/secret key).
third, if anyhow you got connected but still can't go through internet, but, you can ping or access your router, for example, open your router web server to do some change of the configuration, means your packet is stuck on the router and cannot deliver further to internet and it is gateway issue. no else.
well, three shots shall go but you might need more bullets coz this is called troubleshoot
let's see how it will go.
wish you luck -
My wi fi is connecting up fine on my ipod but i can't get onto the internet
My wi fi is connecting up fine on my ipod but i can't get onto the internet. My ipod has been working fine until now and i have tried re- setting the network settings and all the other options that have been given but nothing seems to make any difference. If i try to get onto internet at all on my ipod, for instance, facebook and safari it will just come up no internet connection, even when the bar is full at the top. Can anyone help ?
Despite the WiFi sign at the top you may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If this problem continues you should test your iPod on some other networks. Since you say your iPod was "working fine" either it or your router may have developed a hardware problem. If the iPod works OK on other networks your router may have a problem.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
Issue in connecting to the internet wireless with my Linksys
OK. Here's the deal. I am entirely frustrated and also over my head trying to solve this on my own as I have no idea what I'm doing.
I have a Mac Powerbook, OS X (3.9). I have always connected to the internet wirelessly through my Linksys router (Wireless B Access Point, Model Wap 11).
I have recently moved and now use Comcast for my internet. When they installed my internet, I had not yet unpacked my wireless router, so I was set up to be connected via the actual cable plugged in. Now that the router is all set up, I cannot for the life of me get my wireless to work. Currently, I can use the internet wirelessly in other homes/school no problem. In those cases, I don't do anything, I just turn on my computer and it connects automatically. But for some reason in my apartment I cannot make it work.
I *think* the problem lies somewhere in the IP address area? If I look at my Airport settings and go to the TCP/IP tab, there is no information contained on the screen. Meaning, in the area where it says IP Address, Subnet Mask and Router, there is NO data listed, just gray empty space. The same goes for the DNS Servers and Search Domains areas, but at least in that case there is a white box to input text.
I can choose the "Configure IPv4 Using DHCP Manually" and that will let me input numbers, but I have no idea if I should even be playing around with this.
Also, perplexing me even more, is the fact that I can choose my Linksys internet connection through the Airport screen, and when I have selected it, I show full bars. But I can't actually connect.
Silly me, I attempted to call Comcast for help with the issue, but they say that as long as I can connect to the internet in any way (plugged in) then they do not care that I can't connect wirelessly.
I miss checking my email in bed...someone please help!!!
Thanks a million in advance for any and all help.
-ktAre u talking about routers username , password? Well there is one routers username ,password (default is "admin") and the other is your cable ISP username , password (on the routers webpage). I am talking about the latter. If nothing works, try resetting your router ... You will have to configure it again (doesnt take much time if you know it).
-
My Satellite A25-S279 (WinXP) will not connect to the internet wirelessly since UVerse was installed
My Satellite A25-S279 (WinXP) will not connect to the internet wirelessly since UVerse was installed. (Rather, I should say
it 'connects', then immediately disconnects.) When I had regular DSL, there was no problem, but since UVerse installation,
I can connect ONLY with the ethernet cable.
Thinking it was my 'old' computer, I took it to the local computer place---they were able to connect instantly (wirelessly) AND maintain connection. Sooo...I've told this to ATT, & had 2 different techs out here, both of whom were very patient & tried EVERYTHING they could think of, & both of whom failed to fix the problem. They maintain that it is NOT the fault of the modem/router, but is some 'miscommunication' between my laptop & the modem/router.
Is that possible? Is there a setting I need to change on the laptop? If it worked BEFORE UVerse, and if it STILL works at the Computer store, and if it works WITH the cable, why won't it connect wirelessly?
Thank you SO much for any thoughts!It is possible. While it's not common, sometimes you could have a working router and a working wireless card in a laptop, but they just don't communicate. It sounds like that might be the problem unfortunately.
- Peter -
Premiere Elements 12.1 Constantly Connecting To The Internet When Running
Hi there!
I have an issue with Premiere Elements 12.1 constantly connecting to the Internet when running... it looks like it is either trying to connect to something or downloading something.
Premiere runs OK, but it is very slow: this is due to it trying to connect. (We've proved this by running the program without the Internet disabled... it sits at about 13,000K in memory... and works fine).
Anybody got any idea why it is connecting to the Internet in the first place and how we can stop it doing it.
We believe this issue started when we updated to v 12.1... but can't be sure!
We have tried uninstalling and re-installing it... same problem. We're virus checked till all night... nothing found (no root kits, nothing etc.)
We're running Win XP Service Pack 3, 32 bit... I know 'Windows XP is old etc. etc. etc.'. Yet it still works great and is nice and fast for us here.
Any advice/suggestions greatly received!
Thanks in advance,
GRBakerHi Steve,
Thanks a bunch for the post... we're certainly experiencing no other issues besides the 'downloading' issue on Premiere... various virus/spyware etc. scans have revealed nothing. There's nothing odd in the Startup or process list...
PC operates entirely as normal... no unusual performance lags/Internet disconnections etc. No issues with other software, so far, after installing Elements.
So we're currently leaving the program on to 'download' (or whatever it is doing), so it could be that it will eventually stop constantly accessing the Internet.
We are already in contact with Adobe and they are keeping pretty tight-lipped about what it might be doing... saying (so far) only that Photoshop Elements/Premiere 12 does connect to CloudFront to 'download fonts'... (they were also basically indicating they thought it was our PC/a faulty install until we mentioned we knew it was CloudFront it was trying to connect to...)
...if the applications need to download stuff, then all Adobe has to say is 'it's perfectly normal, just wait for it to complete' then we would not be worried! All it needs is a simple notice to say that 'some additional downloads are required': give us a progress bar or something... no problem!
I can't think why else it would be connecting to the Internet???? (Well, a couple do come to mind..!)
We did pay for the download version of the software (we don't have physical installation DVDs) from one of Adobe's Registered resellers, so maybe that has something to do with it.
I suspect you are 100% correct and that it isn't in fact a bug, bit simply some additional data/content that needs to download etc. If this is the case, then maybe it is related to our broadband speed (which can variable as we live in a rural location).
As you say, if it was a bug everybody would have it! There is that thread I mentioned above, but that's for a previous version of elements I think... to me, as the user experiencing the issue, it definitely looks like a bug as it's rendering the software unstable!
Most likely it's just our bad luck and there's something specific to my installation that's tripping the software and causing the issue. I suppose it depends how you define 'bug'... if it's a normal operation of the software that just happens to disagreeing with my system... than Adobe would say 'that's not a bug'... but I would say 'it's a bug as it causes this problem'. It simply a question of perspective!
Anyway, it's mystifying to me: the software runs GREAT, when it's not trying to access the Internet. It's weird. You certainly can't complain, for price, it really is excellent software!
Cheers,
GRB -
After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion
In this case, I think that there's something damaged that can't be fixed just reinstalling OS X.
If you don't want to lose files, you will have to create a second partition in the hard drive and install OS X there, so you will be able to recover everything you need. Then, you will have to erase the first partition and reinstall OS X. Follow these steps:
1. Hold Command and R keys while your Mac is starting to start into OS X Recovery, and open Disk Utility.
2. You can follow the steps of this site to create a second partition > http://pondini.org/OSX/DU3.html
3. After creating the second partition, close Disk Utility and install OS X on the second partition.
4. When the installation finishes, open Finder and, in the sidebar, you will see the other partition. Open it and recover the files you need.
5. After doing that, repeat the step 1.
6. Select “Macintosh HD” in the sidebar, go to Erase tab and erase the disk.
7. Close Disk Utility and install OS X on the first partition.
After doing all of these steps (you will need a lot of time to do this), you can delete the second partition you created and add the size of this partition into the first one > http://pondini.org/OSX/DU4.html -
I erased by Hard drive without backing up. Now, when I put the install disc one inside, it says that Mac os x cannot be installed on this computer. The computer was running Mac os x 10.5.8. Any help?
Boot from your DVD by switching on the Mac & inserting the disc, restart it & hold the "C" key. Once the installer window loads & you have selected your language, choose Disk Utility from the Utilities Menu. You will then need to select your disk from the menu within Disk Utility & choose how you wish to format. It should be formatted Mac OS Extended (Journaled).
Once it has formatted, you should then be able to install the OS.
PLEASE REMEMBER...that formatting a disk will completely erase it's content. Be sure that you don't wish to recover any of your previous content before doing any of the above.
Ben
Maybe you are looking for
-
Hiding a Complete Subscreen in a main Screen
HI All, I have a req in which there is 5 subscreens present in one main screen. My issue is i want to hide a complete Subscreen based on 1checkbox present in that mainscreen itself. After checking that checkbox user will be pressing ENTER. A
-
Exchange rate EURX not calculate exchange rates between USD and GBP
We have set ExRt as following: Exrt Usage Ref. crcy EURX EMU EUR we have "EMU" flag checked also. We are maintaining exchange rates (EURX) for EUR with all others currencies. We expected that, if we have a CoCode set in GBP an
-
How to insert symbols in the latest version of Keynote
I am a long time user of Keynote 09 and long time inserter of symbols using Edit>Special Characters. It used to be that you could insert a character/symbol from any font on your machine. However, I can no longer figure out how to get a character from
-
Not opening an app download when coming from a webpage
I have a number of sites eg itv.com and want to download the itv player. When I click to download the app from the website, apple apps open but instead of the install window,I just get an empty white box and it hangs, I have tried leaving for hours b
-
I want to edit the list of Genre choices. Is there any way to do it besides editing every file individually?