I need to connect a external GPS antenna on my IPAD3 wifi; is it possible?

I need to connect a external GPS antenna on my IPAD3 wifi; is it possible?

If yo uhave a pre-existing GPS that you are looking to use, you can use the GPS cable provided by http://gps4ios.com
Thx

Similar Messages

  • External GPS Antenna.

    Two questions:
    1. Has anyone been able to get a better accuracy than 17m on the iPhone 3GS?
    2. Is there any way to connect an external GPS antenna to the phone. When I'm geocaching I don't mind rigging up an antenna to my back pack if needed.

    1. On my property, my 3gs seems extremely accurate. Once located, it will follow me up & down the driveway and completely around the property.
    2. The only external antenna I'm aware of is the TomTom car kit. Since it needs a 12v power source to operate(I believe?) you'd have to figure out how to adapt-a-fit it to your backpack.

  • I need to connect an external webcam to an iPad two, is this possible?

    I need to connect an external webcam to my ipad two. Any idea if this is possible and how do you do it?

    Not possible.

  • I need to connect an external FW hard drive & digidesign 002 mixer

    I need to connect an external la cie portable firewire drive & a Digidesign 002 FW 400 mixer to a macbook pro 13".  Should I daisy chain with the hard drive in the middle or use a firewire hub ?

    USB connections are by nature designed to be plugged and unplugged as needed.
    Unless the BackupDrive is backing up, you could potentially drag the drive to the Trashcan before disconnecting the cable, and then disconnect. 
    The Scanner should also have no issues being unplugged.
    If You don't need the keyboard while burning, You could unplug that.
    The Mouse you'll likely need, to interact with the burning software, so probably that would not be a good thing to unplug.
    All in all the Scanner and Keyboard should be the least hassle to unplug.
    For the future you may want to buy a USB HUB so you have more USB ports you can use without having to unplug things.

  • How to Connect my External WD Passport hard disk using wifi

    Dear Friends,
    i have got a new Apple Ipad 4 Gen, of 16GB but now i am facing a problem due to space requirements.
    my ipad is filling with lots of photoes and music.right now only 750mb is available among 16GB. i have an idea ,i need to connect my
    External WD Passport hard disk of 1TB using wifi router. and acess the same with my ipad.for transferring photoes and music and videos
    data e.t.c to and from Ipad.please tell me is this possible with my existing WD hard disk and i am ready to take a new rouer. and how to use this.
    thanks in advance
    Regards
    Krish

    You can play your music from computer to iPad using Home Sharing.
    Understand Home Sharing
    http://support.apple.com/kb/ht3819
    Setting Up Home Sharing on IOS Device
    http://support.apple.com/kb/ht4557
    Setting Up Home Sharing on Computer
    http://support.apple.com/kb/ht4620

  • Problem connecting external GPS antenna to Map app etc.

    My XGPS150 external antenna stopped working with Map and similar Apps like Navionics
    I am told that this is an iOS8.3 bug?
    Is it posible to reinstall 8.2?
    http://gps.dualav.com/faq/xgps150-150a-150e/

    aohaoya wrote:
    Is it posible to reinstall 8.2?
    As of yesterday, no.

  • Adapter needed to connect to external monitor

    I'm trying to connect my macbook to an external monitor. I ordered a VGA Display Adapter but it doesn't fit in the mini-dvi port on my notebook. So I ordered a mini-dvi to VGA adapter, but the pictures I've seen of this adapter do not look like what I need. Can any typical monitor with the typical monitor plug, plug into the mini-dvi to VGA adapter or is there another adapter out there that I'm missing?
    help
    MacBook   Mac OS X (10.4.9)  

    The mini-DVI to VGA adapter should do the trick -- you just plug the mini-DVI into your MacBook and connect a VGA cable to the VGA adapter and your monitor. I use that adaptor to connect to the VGA cable running to the VGA port of a projector and it works just fine.

  • I would need to connect an external drive to my iMac computer?

    I have an iMac hard drive that was purchased 1 year ago from the Apple Summit Sierra store in Reno, Nevada. I have had a lot of issues so this drive was replaced by a new one.  The old hardrive contains OS 10.5.x and has appleworks which I created a lot of documents. 
    The Apple Summit's Genius bar installed OS 10.6.8 onto the new hard drive and now, I am NOT able to open those files that were created with the appleworks software that resided on the old hard drive. I notice that appleworks was replaced by Pages which will not open appleworks files.
    So this is what I am asking the community...
    1. I would like to connect the old hardrive as an external drive so I can open these documents. What is the best way to do this?  Someone mentioned that I would need a "sled" which I suspect is an external casing that has it's own power and connects via USB.  I don't recognize the type of plug that I would need.
    2. The old apple computers could start up from the external hardrive connected to it. Is this still possible with the newer intel computers?
    I would appreciate anyone's suggestions or input.  Thank you...

    To use the HDD as an external drive you need and external drive enclosure. It would connect with your computer via USB or FW; my preference is to have it set up for both for flexibility .Check your computer ports to see what you need.
    When you buy the enclosure check to see whether it comes w/ the cables you need.
    A good source to check for the HD enclosures is: http://www.macsales.com/ If you're not sure of what you need just call them; they're very helpful.  There are other sources for these but OWC is my favorite.
    Your old HDD is probably bootable. Once you have the drive in the enclosure connect it to the computer.
    You can get some data, etc. from the old HDD to the new drive by clicking the ext. HD icon on the desktop to open & dragging whatever you want (or Copy/Paste) to your new HDD.
    Alternatively you can set the external drive as Startup Disk:
    Go to System Preferences>> Startup Disk.  Your new external drive should show there. Click on new drive and Restart. When the computer has rebooted the external HDD (with old HDD) will now be  the Startup Disk. Until you change it again in System Preferences.
    Do you have the appleworks software disks?  You could install that on the new HD, and just move the files from the external HD to the new drive---or is that part of the plan?
    Good luck w/ this.
    Message was edited by: epass

  • Need Help Connecting to External Server

    Hello,
    I installed FMS 2.0 on a server that i have and i'm trying to
    connect to it from a local swf file. I have no idea how to
    reference the Media Server. Is it by IP? Do I need to set up
    something additionally on the server like in IIS? I'm totally
    clueless. Any advice or point in the right direction would be
    greatly appreciated.
    Here is what i'm trying to do...
    var nc:NetConnection = new NetConnection();
    nc.onStatus = function (info)
    trace(info.code);
    if (info.code == "NetConnection.Connect.Success")
    trace("connection successful");
    nc.connect("rtmp://SERVERIP/simpleconnect");
    how do I reference the remote flash media server?
    Thanks in advance?

    You need to have an application directory on FMS - just
    create a subdirectory in the FMS_ROOT/applications directory, name
    it "test". Then change your client code to connect to
    rtmp://server.domain.com/test (or
    rtmp://server.ip.address/test - ip or server name should not
    matter)
    hth

  • Can't connect to external Oracle DB with JDBC connector

    Hello guys,
    I had failed to connect to connect external Oracle  via JDBC connector .
    Could you please help me to resolve the problem ?
    Backgroud:
    We need to connect the external Oracle DB with JDBC connector, because BI need to connect to the target Oracle. If the JDBC connector suceed, BI will create a UD which use the datasource
    we create in Visual admin to connect to the external Oracle DB.
    Environment:
    Our EP version is NW04S SP17 , OS is AIX .
    The target Oracle DB version is 10g(10.1.0.2.0, 64bi).
    Configuration procedure :
    1. Import Oracle driver "ojdbc14.jar" and create new driver which named "Oracle "  under
    JDBC Connector ->Run time ->Driver  in Visual Admin.
    2. Create datasource "Mydatasource" under JDBC Connector ->Run time ->Data Source,
    Name : Mydatasource
    Driver Name : Oracle
    JDBC version: 2.0(with XA support)
    JDBC compliant:
    Object Factory :oracle.jdbc.pool.OracleDataSourceFactory
    DataSource Type: ConnectionPoolDataSource
    *CPDS class name :oracle.jdbc.pool.OracleConnectionPoolDataSource
    Additional:
    Additional Properties:
    DatabaseName:LPAR8TEST
    DriverName:oracle.jdbc.OracleDriver
    Password: *****
    PortNumber:1521
    ServerName: 10.1.16.208
    URL :jdbc:oracel:[email protected]:1521:LPAR8TEST
    User:IMPL
    Connectoin Pool:
    Initial Connectons: 1                                         Expiration:  (check)
    Maximum Connections: 25                                  Connection Lifetime :600
    Maximum time wait of connection : 60                  Cleanup Thread : 200
    Default Connectoin Isolaton :Default
    SQL Engine:
    Open SQL
    3.Create Connector :
       Copy the standard connector :SDK_JDBC to SDK_JDBC_Oracle,
      Resource Adopter:
      Loader References:
      Add "libray:Oracle" .
    Managed Connection Factory:
    Configuration Property:
    DriverName:oracle.jdbc.OracleDriver
    Password: ****
    User:IMPL
    URL: jdbc:oracle:[email protected]:1521:LPAR8TEST
    All fo my configuration had been listed.
    And I had created JCO RFC : JT-BIDEV_PORTAL_BD1 , and created RFC connection with SM59 in BI.
    Please give me some suggesiton.
    Thanks.
    Louis

    When I try to start datasoure "Mydatasource" , it display error, error detail:
    java.rmi.RemoteException: com.sap.engine.services.dbpool.exceptions.BaseRemoteException: Error during start of application "sap.com/Mydatasource". [id = StartupError]
         at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:608)
    Caused by: java.rmi.RemoteException: Error occurred while starting application in whole cluster and wait.; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 3128050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot start DataSource "CGNPC".
         at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1549)
    Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
         at com.sap.engine.services.dbpool.spi.CPManagedConnectionFactoryImpl.createManagedConnection(CPManagedConnectionFactoryImpl.java:198)
    Caused by: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
    Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 3128050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot start DataSource "Mydatasource".
         at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1549)
    Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
         at com.sap.engine.services.dbpool.spi.CPManagedConnectionFactoryImpl.createManagedConnection(CPManagedConnectionFactoryImpl.java:198)
    Caused by: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
              u2026.
    When I try to test JDBC with URL : http://jt-pldev:50000/TestJDBC_Web/TestJDBCPage.jsp,
    First I choose connection name "SDK_JDBC_Oracle" .
    If I click "Check Connectons", it display :
    500   Internal Server Error
    SAP J2EE Engine/7.00
      Application error occurred during request processing.
      Details:
      java.lang.NoClassDefFoundError: com.sap.ip.bi.sdk.dac.connector.odbo.impl.Connection (initialization failure)
    Exception id: [001A64A86F2C006B000004C40010302A000469C74E86A096]
    If I click "Slecton Connection", it display:
    500   Internal Server Error
    SAP J2EE Engine/7.00
      Application error occurred during request processing.
      Details:
      com.sap.engine.frame.core.load.SAPNoClassDefFoundError: javax.resource.Referenceable
    Exception id: [001A64A86F2C0063000004C00010302A000469C74FA2BB59]

  • How to connect to external web service and convert XML to a table

    Hi experts,
      I need to connect to external/non-SAP web service and convert XML in that site to a SAP table?
    Is there a function call(SE37) to do this? Is it a must for me to install AS JAVA or PI and configure enterprise service? Please provide a link for me to retrieve relevant infomation, thx.

    No, you don't need PI or the Java stack for this.  You can create an ABAP proxy using the WSDL file for the web service and call the web service using the proxy class in an ABAP program.  You can transform the XML response to internal tables/structures/variables using a transformation template that you create.

  • Do I need to keep my external hard drive connected at all times for time capsule?

    Do I need to keep my external hard drive connected at all times for time capsule?

    Hi,
    I have a similar question. I have backed up my external hard drive through my computer, onto my TC. When I go into TM, it doesn't show the external hard drive unless it is connected to the computer. Can I access the info from the external hard drive that is on the TC if I don't have the hard drive plugged in? If so, how can I do that?
    Thanks,
    Bernadette

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • HT204382 what software do i need to play movies on avi file . have connected a external memory disk and all the movies are in avi format.

    What software do i need to install in order to be able
    to play movies in .avi format.
    have connected an external memory and all the entertainment
    files are in .avi format.
    Ansver i get : does not support

    VLC is a good choice. While I don't know if it will play your files, Perian is a helper app for Quicktime which allows you to play a lot of things in the Quicktime Player.
    There is also Flip4Mac which allows you to play windows media files in Quicktime.
    Finally, note that the extension on a video file doesn't really tell you what you need to play it. The .avi, .mpg, etc. is only the wrapper around the actual video. The video is encoded by some means and needs to be decoded. The video inside the .avi can be encoded in one of many different schemes.
    VLC, Perian, Flip4Mac, and many others, are all able to decode various flavors of encoding. Having all of those in your toolbox will help to allow you to play most of the things you'll find.

Maybe you are looking for