I need to connect a Netgear WiFi extender to my time capsule

I have bought a Netgear WiFi extender to connect my Skye TV box to the internet. I use a Time Capsule as the home router and it won't connect to it. Any ideas please.

The Netgear will only work if it uses universal repeater.. You cannot extend wireless on Apple router using non-apple products.. and universal tends to be somewhat flakey.. good luck.
(You should use express).

Similar Messages

  • How do i connect to a wifi network after my time capsule has completed its auto setup.

    Let me start by saying I contract overseas currently in Afghanistan. Ok so I have over 10 networks in my area and can not connect to a router with ethernet cable. When it does the auto setup it finds the network sometimes but doesn't stay up long enough for me to enter my password. I just dont know how or where to manually set up my network. I also dont know what information i need. I dont have access to any of the routers so this might not even be possible.
    Thanks Dan

    Unfortunately, the Time Capsule, and AirPort Extreme do require an Ethernet connection when they are connected to a 3rd party wireless network.
    It is a bit goofy....and I don't know if it will work in your particular situation.....but here is what I do when am traveling and I want to set up a private wireless network in my room......and the hotel only provides a wireless connection. I travel with an AirPort Express and another AirPort router....two devices.
    One AirPort Express is configured to "Join a wireless network", so it receives the wireless signal from the hotel. That same Express then feeds an Ethernet signal from its LAN port to the WAN port on another AirPort router, which is set up to "create a wireless network".
    So, I can set up my own private network in the room and connect from multiple devices....wireless or wired...and only pay for one connection.

  • Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

    I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
    The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
    Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
    Thanks

    The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
    If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
    So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
    Assuming your AE is gen3 or greater.
    You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
    And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
    If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
    If your AE is G wireless or earlier model.. really the time has come for replacement.
    If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
    You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

  • HT4199 I need help connecting to my WIFI.  I purchased a new router and am having trouble connecting.

    I need help connecting to my WiFi.  I purchased a new router and am having trouble connecting.

    your gonna want to contact your internet service provider for the best info on setting that router up.  but for connecting to wifi on the iphone, ipad, and ipod
    go to
    settings > wifi
    then choose your connection and enter the password

  • Extending a wifi network with a time capsule

    My broadband router (BT) can only go in my office and is the same room that my iMac is located.
    Is there any way that I can connect my Time Capsule to either my BT wireless router or my iMac via WiFi and us the Time Capsule as another wifi base station.
    Idelaly I want the Time Capsule in the hallway so that I can connect via WiFo from my living room.
    Currently the living room is too far from my office to connect to my BT router via WiFi.

    Is there any way that I can connect my Time Capsule to either my BT wireless router or my iMac via WiFi and us the Time Capsule as another wifi base station.
    Unfortunately, no...unless you want to connect the Time Capsule to the BT router using a wired Ethernet connection or by using Ethernet over Powerline (EOP) adapters.
    You need two Apple routers to be able to "extend" using wireless only......since this feature only works among Apple wireless routers.
    If you connected an Apple router to the BT router using a wired Ethernet connection and configured the Apple router to "create a wireless network", then you could use the Time Capsule to "extend" that same network using wireless only.

  • I need to improve the wireless router range of my time capsule. What sort of extender (repeater?) should I be considering?

    I need to improve the wireless router range of my time capsule. What sort of extender (repeater?) should I be considering? Will it affect my use of the time capsule as a hard drive backup?

    In order to insure compatibility, you need to consider an Apple AirPort Express or AirPort Extreme if you are thinking about "extending" or "repeating" the network wirelessly.
    It is also possible to extend the network by connecting an AirPort Extreme or Express back to the Time Capsule using a permanent wired Ethernet cable connection, which will provide better performance.
    If you have a new "tower" model of the Time Capsule, then you would need a new "tower" version of the AirPort Extreme to take full advantage of the capabilities of the Time Capsule.
    If you have an earlier "flat" or "square" version of the Time Capsule, then an AirPort Express would be a good match for the capabilities of the Time Capsule.
    An "extender" will not affect the operation of your Time Capsule other than allow wireless devices to connect from a greater range at higher speeds.

  • Can I connect an external hard drive to my time capsule to add virtual hard drive space?

    I would like to make a 4 TB external hard drive available wirelessly on my home network.  I have heard that I could connect it to my router or my Time Capsule to do this.  Is this possible?  Is there any special setup I need to do to enable this to work? 
    Additionally, I have two Macbooks in the house and have recently purchased a second Time Capsule.  I would like to back up each computer to its own Time Capsule.  Is there a configuration that would make this possible?
    If the two Time Capsules are connected together via an ethernet cable (in extend the network mode), and one elects to back both of their computers up to the primary Time Capsule, does the primary use the secondary Time Capsule's hard drive space to continue backing up once it becomes full?
    Thanks in advance for any advice you all may have for me in this situation!

    See if Pondini can help http://pondini.org/TM/Home.html

  • Cannot print or scan with USB printer over wifi from airport express / time capsule wifi

    Hi everybody,
    I have recently set up time capsule connected to the router from the telephone company but created a new wifi network for the time machine to better work. Now I have bought an airport express to be able to use my USB printer over the WIFI network. I have to laptops, the printing works fine over the mac book air but not over the macbook pro. On top of that I cannot scan with either of the devices.
    I have scanned most of the information out there but this issue seems not to be addressed properly anywhere. Advices given do always repeat itself but no solution worked for me.
    Now I have plugged the usb from the printer directly back into mac book pro and the problem seems to persist here too. The message I receive everywhere is this one:
    The software for the printer was installed incorrectly.
    Would you like it to be repaired?
    When I hit the Repair button a notice says 'repairing permissions' but nothing really happens. In the end nothing has been printed.
    Resetting the printing systems has not really changed anything either. The problems persist.
    This is the screen I get when the printer is directly plugged in through USB:
    Result: printer recognised and installed, I cannot print (The software for the printer was installed incorrectly), but I can scan (probably because of the hint ('multifunction')
    When I try to install the printer through the network connection (wifi network over time capsule and airport express) I get this image:
    Result: printer recognised over bonjour but without multifunction (in other words without scanning), I cannot scan nor print (The software for the printer was installed incorrectly)
    As I already mentioned any solution I found online would not work. Now the qustions are:
    1) why can't I print? The drivers seem to be there but somehow broken, and I don't know how to repair it
    2) why can't I scan over wifi? It sould possible that any function that can be performed over cable should also be able to performable over air, right?
    I would very much appreciate any kind of help.
    Thank you in advance,
    Cris

    What's up doc?
    HP has not provided "network" drivers to allow advanced features when the the All-in-One is connected to the USB port on the Time Capsule.
    Therefore, only the printing function is supported when the All-in-One is connected to the Time Capsule's USB port.
    If you need advanced features like fax, copy, scan, maintenance etc., you will need to connect over the WiFI network, or connect the All-in-One directly to your computer.

  • HT3728 How is the extended network with Time Capsule Airport 2013? (802.11ac)

    I have a Airport Time Capsul 2013. wireless network does not extended. All updates ok. Please help me..

    Apple's "extend a wireless network" feature appears to be proprietary to Apple.....and as far as we know....will only work when the Time Capsule connects wirelessly to another Apple wireless router.
    So, it would be extremely unlikely that that the Time Capsule could extend the signal from your cable/modem wirelessly.
    Instead, to allow the Time Capsule to extend the wireless signal coverage, you will need to establish a permanent wired Ethernet cable connection from your modem/router to the Time Capsule. 
    Then, configure the Time Capsule to "create" a wireless network using the same wireless network name, same security settings and same password as your modem/router network.
    As a final step insure that the Time Capsule is configured to operate in Bridge Mode to work correctly on the network.

  • Hi I am trying to connect a new mac to an existing time capsule but Airport Utility is just not picking it up. What am I missing?

    I have tried to connect the new mac to an existing time capsule both directly through ethernet and through wifi. Both times I get Internet connection OK but Airport Utility is stuck searching for the base station. I have two existing macs which are connected fine and have both been backing up quite happily. The first two macs are the same user (me) and the new one is for a different user in the house. All the macs are running Mavericks.
    I have tried rebooting the time capsule and the new mac - didn't help.
    Any information as to what I can try would be most welcome.
    Many thanks

    Hi All
    I have solved my problem! It was the old chestnut the firewall issue. We have McAfee firewalls on our machines and the wifi network was set up as a public rather than a home network. I changed it to Home or Work and het presto the time capsule appeared. I didn't have this problem with the other machines at all.
    I hope this helps someone!!

  • If I connect an external hard drive to the Time Capsule, all it automatically back it up?

    If I connect an external hard drive to the Time Capsule, will it automatically back it up? Or do I need to somehow configure it in TIme Machine?

    A HDD attached to the Time Capsule (TC) will not automatically back it up, nor can you configure Time Machine to do so. However, you can use the AirPort Utility to archive the contents of your TC's internal HDD to this attached drive.

  • I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

    I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

    In addition to Niel's comments, if you plan to use Time Machine to backup a Mac to the secondary drive.....that application needs a drive that has been specifically formattted for Mac.  That would be Mac OS Extended (Journaled).
    PCs can also read and write to the Mac formatted drive.

  • I connected a external hard drive to the Time capsule but I can't get it to connect, I connected a external hard drive to the Time capsule but I can't get it to connect

    I connected an external hard drive to the Time Capsule but can't get it to work.

    And are you using a powered USB hub? The USB port on the Time Capsule is under powered, so you almost always need to use a powered USB hub, even if the hard drive has its own power supply.

  • If i connect an external hard drive to my time capsule will it be backed up on time capsule?

    I recently connected an external hard drive to my time capsule using the usb port on the time capsule.  Will that external hard drive be included in the time machine back up?  If not, how do I include it?

    Time Machine cannot back up a hard drive that is connected to the USB port on the Time Capsule.
    If you want to backup the hard drive, it must be connected to your Mac to be included in Time Machine backups. Additional settings will need to be made if you do this, so post back for details if you need them.
    If you cannot connect the drive to your Mac, then you will need to use another backup program like Carbon Copy Cloner, SuperDuper or Chronosync to backup the hard drive to the Time Capsule.

  • Can you connect a mobile broadband device to a time capsule?

    Can you connect a mobile broadband device to a time capsule?

    Only if it has ethernet.. and offers the ip direct to the device ie you need a 3G router not a USB stick..

Maybe you are looking for

  • How do i move a movie purchased with apple tv to my iPad

    How do i move a movie purchased with apple tv to my iPad

  • Time limit exceeded in inbound qRfc

    Hi all! Please I need your help with this timeout issue. I have the following scenario: FTP --> XI (Java mapping) --> R3 (Idoc) Where from that Java mapping I do some RFC's to R3 in order to make conversions and validations. When I test this interfac

  • Why does my Movie Library say I have more items than I do??

    HI I have a question about my Movie Library. When looking in my library at the bottom the count says I have 248 items. When Selecting all in the library it tells me I have 240 items selected. This is a little confusing as I've just done a data transf

  • Details about basic type 'SHPMNT 06'

    Hello experts, I have basic type 'SHPMNT 06'  , and i want to know what is the F.M. That i need to operate which the inbound idoc not failed I try with F.M "IDOC_INPUT_SHPMNT"                                                                           

  • Nikon D600 NEF files and Photoshop CS3

    Hi, I am using Photoshop CS3 and cannot upload Nikon D600 NEF files--obviously a gap between the two debuts.  Are there any suggestions, or am I stuck upgrading? Thanks