I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?
I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?
Before I bought it I did the same question at the Apple Store, and they told me "You can extend your existing Wi-Fi Signal with Airport Express wireless...
You cannot extend wireless from any brand except another apple router.. the store might have assumed you were using an apple main router. Most people who buy express buy them to extend an extreme or time capsule.
You are correct .. in the setup documents it does say 5.6.1 is adequate to do the setup.. my bad.. !!
Similar Messages
-
my ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?
Wow the customer service is even worse. Does Apple want me to go around jailbreaking my iPod now so I can use something that actually recognizes my product?
-
ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If within warranty (yours is since the warranty is one year) and not abused, Apple will exchange it at no cost. -
Excuse my technical language. When everything was normal, I had icons on my computer task bar (bottom of my screen) from my programs and from Firefox, but now the icons from Firefox Add-ons like the Firebug, ReminderFox and AniWeather are barely visibles, I can still see them behind this task bar but I can't click on them. It looks like they are behind a thin coat of glass. If someone can help, please do I will appreciate it.
Hi Mariah ~
It's Shaunn, the original poster. Thanks for your posting. I'm glad I'm not the only one that's having this problem.
Now that you mention it, I'm having the exact same problem on Facebook as well, when I play Family Feud.
I wish someone would investigate and post a solution to this problem. No-one from Playlist has responded, and no-one "Officially" from Firefox either.
So Mariah, I appreciate you and your post.
If you find anything out...from anywhere...would you please let me know. You can post it right here and I'll get an email from Firefox.
I'll do the same for you.
Enjoy your day and good luck.
Shaunn -
as stated in the title, i cant get my hotmail account to work on any ipad, its the same email address i have used for logging into the app store so i know the email is fine, any help would be great
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Since you are new to the iPad ....
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
My iphone was locked and i can't remember my passcode i did all the info on how to unlock my iphone but still did not work
If you forget your passcode there is only one way to remedy the situation.
Put your phone in recovery mode and restore the device using iTunes.
HT1808 iOS: Unable to update or restore
http://support.apple.com/kb/HT1808 -
Hi, This is my first time I hope someone can help.
I am working with numbers and I have a large number of products in one column and the relevent prices in another. All the prices are different and I want to increase the price of everything by 5% or 10% etc. Is this possible?
Thanks in advance
Stiffy123Ad a new, temporary column (or one you can hide when not using). Let's say the current Prices are in column C and the new column is D.
you can inflate the prices in column C by 5% by entering the formula in the first cell of column D as:
=C2*105%
likes this:
to fill down, select D2, then copy, then select the D3 thru the end of the column, then paste. Now select C2 thru the end of column C, now paste over the existing values using the menu item "Edit > Paste Values"
you can now hide column D until you need to use it again. -
Hello
I have 2 seperate airport express systems on my network, each connecting to a stereo in a different room. suddenly, the one in the living room will not stop flashing amber, but the one in the bedroom works fine. I have already tried resetting it with a pin, resetting it while plugging it in, and trying to find it in airport express setup (the setup assistant can't find it at all).
What am i doing wrong?How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX. -
Hopefully someone can help.... I have an Iphone 5 and want to create a music video playlist on my phone so then i can play through my apple tv... but when i make a playlist in itunes and try to add it over to my iphone it wont let me sync the playlist...? I have already added the music videos to my iphone so that is not the problem.... i cant seem to figure out how to make a playlist for them... IE: to make the videos play consecutively in the order i want without stopping after each video and gong back to the list.... this is what i have had to resort to make it work....what i want to do....is be able to make a playlist of videos on my iphone 5....take my apple tv to friends houses and with wifi....set up apple tv and play videos at the party and not have to stand by with the remote and find a new video to play stopping the music between the songs/videos....very annoying....and have spent over 4 hours one day and an hour and a half today on the phone today with a sr. advisor with apple and they have no clue.... this seems sooooo simple.... please somebody that really knows how to do this....i will be indebted forever...............
MikeThank you for replying. Yes I deleted the old email address..
-
Hope someone can help - Lightroom not working...at all...nothing....
I have tried installing about 20 or so times now and still cant get any thing at all when i launch the application - its likek it freezes. Something somewhere is missing or corrupt in my mac or the dowmload i downloaded and here's really hoping someone can help.
I have been using the beta since beta 1. This morning i downloaded the V1.0 and went through the usual steps on a mac. Launched the programme and got the option screen of entering a code or trying for free for 30 days.
Chose the free trial as my serial code had not yet been sent.
The application seemed to start and then said it was going to upgrade/update (or similar) my old library and this may take a few minutes. Fine - I've got all day - no worries.
5 hours later and not a whole lot appears to have happened other than Lightroom being frozen and I cant do much. Force quit ensues and an attempt to relaunch the application.
It launches and I getthe start up Window that lists all teh people who made it...but my cursor just goes into spinning ball mode an dnothing happens. This has now gone on about 20 or so times. I have tried removing the Lightroom with Appzapper and then re-installing the original beta followed by the new download....still nothing but a frozen lightroom
Anyone got any ideas - it must be something to do with my mac as everyone else seems to be using lightroom ok... and i'm desperate...seeing as i've been using it since beta 1
hope someone can help??Another thing to check is the permission settings on the Lightroom application and on the folder where your library lives (or will live, if you're making a new one.)
The Lightroom application needs to have an owner who has read/write permission on the library folder's location. Normally this owner will either be your own user ID or the "system" ID -- check by doing a command-i and seeing what shows up under the 'Details' section of the 'Ownership and Permissions' section.
I was having exactly the same problem you described until I checked and discovered that for some reason, Adobe's Installer had installed Lightroom with a strange owner ID that only had read permission on my library folder's location. Since Lightroom needs to be able to both read and write to the library when it starts up, it was launching and then just sitting there doing nothing.
I changed Lightroom's owner to 'system,' then made sure that the 'admin' group (of which 'system' is a member) had read/write permission on my library folder's location. After that, Lightroom launched fine. -
Hi,
I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, the only thing I can do is the force quit keyboard shortcut but there is nothing to quit, I have tried to start up in safe mode but again there is no icons in the desktop,
I have my disks that came with my laptop I have went into disk utility to repair disk and I still seem to have the same problem .. No icons or apps or anything lol just the cursor I can only shut down the laptop via power but and the press shut down.
Please help I am going out my mind with this thing :(
Thanks x jadeThis can be used to boot the machine and delelte enough files to get it to boot normally.
.Create a data recovery/undelete external boot drive
Read about storage drive so you can store your extra stuff.
Most commonly used backup methods
Also here to see how a full boot drive slows the machine down
Why is my computer slow? -
I have 2 computers (1 Pc and 1 MAC) and 1 Iphone.The I phone is synchronised with the PC. I want to synchronised it also with my MAC, without erasing all my music and files. Someone can help me to find the answer ?
i have already try the copy/paste thing with the ID of the file "iTunes Music Library.xml" it didn't change a thing. each time I relaunched Itunes, the ID is the first I have in the MAC.
I have more than 5 000 files of music. I don't want to recreate one by one all my playlits.
Many thnaks for your answers.
ConstanceYou can sync iphone with one and only one computer at a time. If you sync to another, it will erase the current content and replace with content form the new computer. There is no way around this.
Put everything on one computer and sync from there.
BTW, you posted in the Home Share forum. Your question seems to have nothing to do with home share. -
I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my PC runs under Windows 8.1. and Iphone runs under IOS 7.1. Someone can help me, please?
It seems I have solved my own problem . . . well hopefully !! ;-)
I was using a 'non' Apple cable. When I swithced to using the stock cable that came with my iPhone, iTunes can now see that I have a 'Device' and identifies it correctly as my iPhone.
Hopefully this may help others . . . ?
Cheers,
Grant. -
Hi everyone, I was wondering if someone can help me. I recently got my first ever Ipod. It's the new Ipod Nano 7th Generation. I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens. I have tried uninstalling & re-installing Itunes but this didnt help.
Does anyone have any ideas?
Thanks for your help.I think the problem is that the iPod got set to Manually manage music and videos. It needs to be set up for automatic syncing again. Just unchecking that Manually manage music and videos setting does not do it.
In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen. In the sidebar (along left side of screen), there are two headings (Settings and On My Device). Under Settings, click on Music. To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box at the top for Sync Music. That turns ON automatic syncing for music. Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod). Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below. Then click Apply. -
Hi, I'm new at this but I am hoping someone can help me.I have recently been away for 5 weeks and my Tom Tom required updating.When I clicked to update it, it required a pc. As I didn't have access to a pc it wouldn't work is there any way to do this without a pc? I was without this app for 3 weeks! Thanks, Lea
The process to update your Tom Tom is a big data file, you will need to be connected to a Wi-Fi network for it to download. If will take about an hour.
Maybe you are looking for
-
Since iOS 8.1.2 upgrade problems with yahoo mail via apple mail client
Since the upgrade to iOS 8.1.2 on my iPad I'm having issues with my yahoo mail account when using the apple mail client. I can send emails but cannot receive them. When I use the yahoo mail app there is no problem Sending or receiving. I have deleted
-
Retaining the fileName inside the zipped files
Hi Experts, I am working on a file to file scenario, in which the files have to be picked up the files in pair(pdf) and zip them and post in the particular folder. I have used PayloadZipBean for zipping the files, but not able to get the original fi
-
I am rather new to Java but am quite fluent with C, C++ and C#. I have this code with a main menu function and a main function. For whatever reason when I try to change functions/methods I get an error. Below is my pastebin. http://nettworks.pastebin
-
Where can i find my back up in my computer
where can i find my back up
-
I'm looking for the dimensional drawing for the NI 9913 DIN rail mounting kit.
I'm looking for the dimensional drawing for the NI 9913 DIN rail mounting kit. Found drawings for other kits, but not the NI 9913.