I Need to create a dial-up for USB Modem please

Afternoon to all
I am working in Bagdad as a pilot. Had to buy a Axesstel wireless 3G desktop phone to get internet. Unfortunately this phone has no MAC support and I have to use XP (situated on a second partition). It works fine if I run XP only, but I cannot dial-up through fusion, from apple side. I am convinced that you guys might know how I can create my own dial-up in Leopard. Here is all the info I could get inside windows regarding the XP dial-up;
PX300 Series CDMA1X Fixed Wireless Phone
Details
Device Name Axesstel USB Modem
Device Type modem
Server type PPP
Transports TCP/IP
Authentication MD5 CHAP
Compression (none)
PPP Multilink framing Off
Server IP address I have this available
Client IP address I have this available
Speed of connection 230.4 Kbps
Properties
General
Modem - Axesstel USB Modem (com3)
Networking
PPP:Windows 95/98/NT4/2000,Internet
LCP extensions enabled
software compression enabled
This connection uses the following items
Internet protocol (TCP/IP)
QoS Packet scheduler
Maybe you can point me to someone who knows how to create this please
Thanks a million
Hein

You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

Similar Messages

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

I know my Apple Id (not .mac) and password but I can't logon to ichat. I keep getting a message of password not matched. Do I need to create a new account for Ichat?

I know my Apple Id (it isn't ".mac") and password but I can't log on to ichat. I keep getting a message of password not matched. I saw somewhere that my Apple id is the same as my ichat account. Do I need to create a new account for Ichat? I've already reset my Apple id password 3 times in the last 2 days. What am I doing wrong?

Hi,
At one time only Email IDs from Apple (when it was just @Mac.com) were referred to as "Apple IDs"
Other IDs such as to log in to Discussions were know as Discussion IDs
Things like the Online Store and iTunes and Apple realising that people would prefer one ID to have access to Everything tended to move things together.
There can be a variety of combos now
iChat Name
@mac.com before MobileMe
@mac.com post MobileMe
AIM Names
AIM names current
MobileMe (@Me.com)
Style
Email Address valid with the .Mac service prior MobileMe Note 1
Email style Name Valid with AIM
May or may not be an Email address
Can be AIM issued or third party Email address
Valid Email with MobileMe Service
Other Abilities
May also be Currently valid email linked to a MobileMe account
Maybe Valid Apple ID
Is a Valid AIM Screen Name
May Not be a Valid Apple ID (was an option choice at one stage)
Is a Valid AIM Screen Name
May not look like an Email (No @whatever.com) but may be linked to either an AOL email account or AIM one
Current Registration seems to be pushing Email registration (@AIM.com)or asking to use another you currently use.
Trial Accounts are limited to the Trial Period Only as Emails, Valid AIM Screen Names and Apple IDs.
Apple ID
Possibly (likely)
Possibly (depends when Registered)
More currently Yes.
No
No
Yes
Glad I could help.
8:39 PM Thursday; September 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Need to create a driver class for a program i have made...

hey guys im new to these forums and someone told me that i could get help on here if i get in a bind...my problem is that i need help creating a driver class for a program that i have created and i dont know what to do. i need to know how to do this is because my professor told us after i was 2/3 done my project that we need at least 2 class files for our project, so i need at least 2 class files for it to run... my program is as follows:
p.s might be kinda messy, might need to put it into a text editor
Cipher.java
This program encodes and decodes text strings using a cipher that
can be specified by the user.
import java.io.*;
public class Cipher
public static void printID()
// output program ID
System.out.println ("*********************");
System.out.println ("* Cipher *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* CS 181-03 *");
System.out.println ("*********************");
public static void printMenu()
// output menu
System.out.println("\n\n****************************" +
"\n* 1. Set cipher code. *" +
"\n* 2. Encode text. *" +
"\n* 3. Decode coded text. *" +
"\n* 4. Exit the program *" +
"\n****************************");
public static String getText(BufferedReader input, String prompt)
throws IOException
// prompt the user and get their response
System.out.print(prompt);
return input.readLine();
public static int getInteger(BufferedReader input, String prompt)
throws IOException
// prompt and get response from user
String text = getText(input, prompt);
// convert it to an integer
return (new Integer(text).intValue());
public static String encode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String encoded = ""; // base for string to return
char letter; // letter being processed
// convert message to upper case
original = original.toUpperCase();
// process each character of the message
for (int index = 0; index < original.length(); index++)
// get the letter and determine whether or not to
// add the cipher value
letter = original.charAt(index);
if (letter >='A' && letter <= 'Z')
// is A-Z, so add offset
// determine whether result will be out of A-Z range
if ((letter + offset) > 'Z') // need to wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE + offset);
else
if ((letter + offset) < 'A') // need to wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE + offset);
else
letter = (char) (letter + offset);
// build encoded message string
encoded = encoded + letter;
return encoded;
public static String decode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String decoded = ""; // base for string to return
char letter; // letter being processed
// make original message upper case
original = original.toUpperCase();
// process each letter of message
for (int index = 0; index < original.length(); index++)
// get letter and determine whether to subtract cipher value
letter = original.charAt(index);
if (letter >= 'A' && letter <= 'Z')
// is A-Z, so subtract cipher value
// determine whether result will be out of A-Z range
if ((letter - offset) < 'A') // wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE - offset);
else
if ((letter - offset) > 'Z') // wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE - offset);
else
letter = (char) (letter - offset);
// build decoded message
decoded = decoded + letter;
return decoded;
// main controls flow throughout the program, presenting a
// menu of options the user.
public static void main (String[] args) throws IOException
// declare constants
final String PROMPT_CHOICE = "Enter your choice: ";
final String PROMPT_VALID = "\nYou must enter a number between 1" +
" and 4 to indicate your selection.\n";
final String PROMPT_CIPHER = "\nEnter the offset value for a caesar " +
"cipher: ";
final String PROMPT_ENCODE = "\nEnter the text to encode: ";
final String PROMPT_DECODE = "\nEnter the text to decode: ";
final String SET_STR = "1"; // selection of 1 at main menu
final String ENCODE_STR = "2"; // selection of 2 at main menu
final String DECODE_STR = "3"; // selection of 3 at main menu
final String EXIT_STR = "4"; // selection of 4 at main menu
final int SET = 1; // menu choice 1
final int ENCODE = 2; // menu choice 2
final int DECODE =3; // menu choice 4
final int EXIT = 4; // menu choice 3
final int ALPHABET_SIZE = 26; // number of elements in alphabet
// declare variables
boolean finished = false; // whether or not to exit program
String text; // input string read from keyboard
int choice; // menu choice selected
int offset = 0; // caesar cipher offset
// declare and instantiate input objects
InputStreamReader reader = new InputStreamReader(System.in);
BufferedReader input = new BufferedReader(reader);
// Display program identification
printID();
// until the user selects the exit option, display the menu
// and respond to the choice
do
// Display menu of options
printMenu();
// Prompt user for an option and read input
text = getText(input, PROMPT_CHOICE);
// While selection is not valid, prompt for correct info
while (!text.equals(SET_STR) && !text.equals(ENCODE_STR) &&
!text.equals(EXIT_STR) && !text.equals(DECODE_STR))
text = getText(input, PROMPT_VALID + PROMPT_CHOICE);
// convert choice to an integer
choice = new Integer(text).intValue();
// respond to the choice selected
switch(choice)
case SET:
     // get the cipher value from the user and constrain to
// -25..0..25
offset = getInteger(input, PROMPT_CIPHER);
offset %= ALPHABET_SIZE;
break;
case ENCODE:
// get message to encode from user, and encode it using
// the current cipher value
text = getText(input, PROMPT_ENCODE);
text = encode(text, offset);
System.out.println("Encoded text is: " + text);
break;
case DECODE:
// get message to decode from user, and decode it using
// the current cipher value
text = getText(input, PROMPT_DECODE);
text = decode(text, offset);
System.out.println("Decoded text is: " + text);
break;
case EXIT:
// set exit flag to true
finished = true ;
break;
} // end of switch on choice
} while (!finished); // end of outer do loop
// Thank user
System.out.println("Thank you for using Cipher for all your" +
" code breaking and code making needs.");
}

My source in code format...sorry guys :)
   Cipher.java
   This program encodes and decodes text strings using a cipher that
   can be specified by the user.
import java.io.*;
public class Cipher
   public static void printID()
      // output program ID
      System.out.println ("*********************");
      System.out.println ("*       Cipher      *");
      System.out.println ("*                   *");
      System.out.println ("*                          *");
      System.out.println ("*                   *");
      System.out.println ("*     CS 181-03     *");
      System.out.println ("*********************");
   public static void printMenu()
      // output menu
      System.out.println("\n\n****************************" +
                           "\n*   1. Set cipher code.    *" +
                           "\n*   2. Encode text.        *" +
                           "\n*   3. Decode coded text. *" +
                           "\n*   4. Exit the program    *" +
                           "\n****************************");
   public static String getText(BufferedReader input, String prompt)
                                       throws IOException
      // prompt the user and get their response
      System.out.print(prompt);
      return input.readLine();
   public static int getInteger(BufferedReader input, String prompt)
                                       throws IOException
      // prompt and get response from user
      String text = getText(input, prompt);
      // convert it to an integer
      return (new Integer(text).intValue());
   public static String encode(String original, int offset)
      // declare constants
      final int ALPHABET_SIZE = 26; // used to wrap around A-Z
      String encoded = "";           // base for string to return
      char letter;                   // letter being processed
      // convert message to upper case
      original = original.toUpperCase();
      // process each character of the message
      for (int index = 0; index < original.length(); index++)
         // get the letter and determine whether or not to
         // add the cipher value
         letter = original.charAt(index);
         if (letter >='A' && letter <= 'Z')
            // is A-Z, so add offset
            // determine whether result will be out of A-Z range
            if ((letter + offset) > 'Z') // need to wrap around to 'A'
               letter = (char)(letter - ALPHABET_SIZE + offset);
            else
               if ((letter + offset) < 'A') // need to wrap around to 'Z'
                  letter = (char)(letter + ALPHABET_SIZE + offset);
               else
                  letter = (char) (letter + offset);
         // build encoded message string
         encoded = encoded + letter;
      return encoded;
   public static String decode(String original, int offset)
      // declare constants
      final int ALPHABET_SIZE = 26; // used to wrap around A-Z
      String decoded = "";           // base for string to return
      char letter;                   // letter being processed
      // make original message upper case
      original = original.toUpperCase();
      // process each letter of message
      for (int index = 0; index < original.length(); index++)
         // get letter and determine whether to subtract cipher value
         letter = original.charAt(index);
         if (letter >= 'A' && letter <= 'Z')
            // is A-Z, so subtract cipher value
            // determine whether result will be out of A-Z range
            if ((letter - offset) < 'A') // wrap around to 'Z'
               letter = (char)(letter + ALPHABET_SIZE - offset);
            else
               if ((letter - offset) > 'Z') // wrap around to 'A'
                  letter = (char)(letter - ALPHABET_SIZE - offset);
               else
                  letter = (char) (letter - offset);
         // build decoded message
         decoded = decoded + letter;
      return decoded;
   // main controls flow throughout the program, presenting a
   // menu of options the user.
   public static void main (String[] args) throws IOException
     // declare constants
      final String PROMPT_CHOICE = "Enter your choice: ";
      final String PROMPT_VALID = "\nYou must enter a number between 1" +
                                  " and 4 to indicate your selection.\n";
      final String PROMPT_CIPHER = "\nEnter the offset value for a caesar " +
                                   "cipher: ";
      final String PROMPT_ENCODE = "\nEnter the text to encode: ";
      final String PROMPT_DECODE = "\nEnter the text to decode: ";
      final String SET_STR = "1"; // selection of 1 at main menu
      final String ENCODE_STR = "2"; // selection of 2 at main menu
      final String DECODE_STR = "3"; // selection of 3 at main menu
      final String EXIT_STR = "4"; // selection of 4 at main menu
      final int SET = 1;            // menu choice 1
      final int ENCODE = 2;         // menu choice 2
      final int DECODE =3;          // menu choice 4
      final int EXIT = 4;           // menu choice 3
      final int ALPHABET_SIZE = 26; // number of elements in alphabet
      // declare variables
      boolean finished = false; // whether or not to exit program
      String text;              // input string read from keyboard
      int choice;               // menu choice selected
      int offset = 0;           // caesar cipher offset
      // declare and instantiate input objects
      InputStreamReader reader = new InputStreamReader(System.in);
      BufferedReader input = new BufferedReader(reader);
      // Display program identification
      printID();
      // until the user selects the exit option, display the menu
      // and respond to the choice
      do
         // Display menu of options
         printMenu();
         // Prompt user for an option and read input
         text = getText(input, PROMPT_CHOICE);
         // While selection is not valid, prompt for correct info
         while (!text.equals(SET_STR) && !text.equals(ENCODE_STR) &&
                 !text.equals(EXIT_STR) && !text.equals(DECODE_STR))
            text = getText(input, PROMPT_VALID + PROMPT_CHOICE);
         // convert choice to an integer
         choice = new Integer(text).intValue();
         // respond to the choice selected
         switch(choice)
            case SET:
            // get the cipher value from the user and constrain to
               // -25..0..25
               offset = getInteger(input, PROMPT_CIPHER);
               offset %= ALPHABET_SIZE;
               break;
            case ENCODE:
               // get message to encode from user, and encode it using
               // the current cipher value
               text = getText(input, PROMPT_ENCODE);
               text = encode(text, offset);
               System.out.println("Encoded text is: " + text);
               break;
            case DECODE:
               // get message to decode from user, and decode it using
               // the current cipher value
               text = getText(input, PROMPT_DECODE);
               text = decode(text, offset);
               System.out.println("Decoded text is: " + text);
               break;
            case EXIT:
               // set exit flag to true
               finished = true ;
               break;
         } // end of switch on choice
      } while (!finished); // end of outer do loop
      // Thank user
      System.out.println("Thank you for using Cipher for all your" +
                         " code breaking and code making needs.");
}

Need to create stupid proof templates for non-designers

Ok folks, I'm new to this forum having come across it in search of a solution to my problem.
I need to create illustrator template files (.ai not .ait) that customers can download and use to create their own artwork for print. I have to create them in every printable paper format from business cards to A3 posters, folding, non-folding yada yada.
Now, previously, we used an .ai file with a guide layer we created. This guide layer had all relevant info, was named accordingly. It was set not to print and locked. As I tend to use print to file, distiller and all, this has always been perfectly adequate to create my pdfs. Of course, this doesn't work the same way when saving a pdf, which is what most people do. However, customers who wish to download the templates are having some difficulty with the concept of 'make sure you delete the guide layer before saving your pdf'.
For the most part, the customers using these files are not illustrator literate. Even though there are clear instructions to 'delete' the guide layer when saving the needed pdfs, they are failing to do so. This means when the .ai (with the non printable layer) is saved to pdf, the guide layer as a hidden object is saved within the pdf. Upon printing at our printing facilities, the guide layer has been printed with disasterous results.
A possible solution we came up with was to use the ruler guides to create the guide layer. For this solution to work though, I need to be able to use different colours for different guides within the same document. Which we can't. We can only change all the guide colours and they are all the same colour.
Another idea would be to outline text indicating various printable and non-printable areas and making them into guides via View>guides>make guides, which works to an extent but looks messy, especially when viewing the full page and again, isn't particularly distinctive, leading back to having different guides in different colours.
I've come across another possible solution involving template layers. Viewing the resulting pdf seems fine and in all purposes it does what we need, except for when reopening the saved (not printed) pdf back in illustrator, the template layer is still there and I need it gone. The same way it would be if the .ai were printed to postscript and sent through distiller.
My ideal solution would be to have to ability to have the different coloured ruler guides in place throughout my document, but as I previously stated, all guides have to be the same colour and that's useless in this instance.
So, has anyone got any bright ideas. Coincidentally I need to create the same templates for both psd and indesign but I'll cross that bridge when I've figured this out.

Hey Mike, thanks for the response.
1. Not a chance, if, even when the process is described in great detail in an info pdf, available as info on the website (with screenshot instructions) and mentioned in the .ai file itself, they aren't even deleting the guide layer, then turning off 'Preserve illustrator editing capabilities' is kind of a stretch. Like I said, the folks these templates are to be designed for are not illustrator literate for the most part.
2. Not sure if this would work. I'd have to look into it.
3. Beyond my capabilities. I'll let you know if number 2 works.
One possible solution I've come up with uses the idea of a template layer always on top, with 'DELETE THIS LAYER' and screenshot of layers pallette and clear little red arrows etc. If I can the template layer to always remain on top, with their artwork layer underneath, they would have to toggle hide/unhide to view their artwork, and the reminder to remove the guide layer would be pretty much in their face. That's not a guarantee either though.
Personally, I think what I've been asked to achieve is a pretty hard task and honestly, I'm thinking there are no failsafe options.

Hi, both my husband and I have iphones synced to my apple id. It seems that we can't facetime due to this as it's like my email address is calling my email address! Is there anyway to fix this or will we need to create a new id for my husband's phone?

Hi, both my husband and I have iphones synced to my apple id. It seems that we can't facetime due to this as it's like my email address is calling my email address! Is there anyway to fix this or will we need to create a new id for my husband's phone?

settings - facetime - remove the apple id, on your husband phone.
He should create his own id for imessage and facetime.

Need to create a Z transaction for SE16

Hi All,
I have a requirement in which I need to create a Z transaction for SE16 and then restrict the access of that transaction to 3 tables and users cannot see other tables through this transaction. it would be fine even if this condition can be implemented on standard transaction(in SE16 with out creating a Z with the help of basis team).
I tried to copy the transaction and also the program (program name: SAPLSETB and screen 230 even this program is made a Z program)
but this is giving a short dump.
Please let me know if the process i am following is correct if not can you please suggest me a better one.
Thanks in advance.
Regards,
LRK.

Hi
U can assign your transaction to Z-report like this:
PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
            TAB2 RADIOBUTTON GROUP R1,
            TAB3 RADIOBUTTON GROUP R1.
DATA: TABNAME TYPE TABNAME.
START-OF-SELECTION.
CASE 'X'.
    WHEN TAB1. TABNAME = 'BSID'.
    WHEN TAB2. TABNAME = 'BSAD'.
    WHEN TAB3. TABNAME = 'BKPF'.
ENDCASE.
CALL FUNCTION 'RS_TABLE_LIST_CREATE'
    EXPORTING
      TABLE_NAME               = TABNAME
*   ACTION                   = 'ANZE'
*   WITHOUT_SUBMIT           = ' '
*   GENERATION_FORCED        =
*   NEW_SEL                  =
*   NO_STRUCTURE_CHECK       = ' '
*   DATA_EXIT                = ' '
* IMPORTING
*   PROGNAME                 =
* TABLES
*   SELTAB                   =
   EXCEPTIONS
     TABLE_IS_STRUCTURE       = 1
     TABLE_NOT_EXISTS         = 2
     DB_NOT_EXISTS            = 3
     NO_PERMISSION            = 4
     NO_CHANGE_ALLOWED        = 5
     OTHERS                   = 6
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Need to create a Change document for tracking Purpose on standard table

Hi Experts,
I am updating a field in standard table so need to create a change document for tracking the changes being done on the field.
I created the change Document with transaction SCDO but I am stuck at point - How to call that in the report program to enable the change document.
Please advice.
Thanks!!

Hi
U can assign your transaction to Z-report like this:
PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
            TAB2 RADIOBUTTON GROUP R1,
            TAB3 RADIOBUTTON GROUP R1.
DATA: TABNAME TYPE TABNAME.
START-OF-SELECTION.
CASE 'X'.
    WHEN TAB1. TABNAME = 'BSID'.
    WHEN TAB2. TABNAME = 'BSAD'.
    WHEN TAB3. TABNAME = 'BKPF'.
ENDCASE.
CALL FUNCTION 'RS_TABLE_LIST_CREATE'
    EXPORTING
      TABLE_NAME               = TABNAME
*   ACTION                   = 'ANZE'
*   WITHOUT_SUBMIT           = ' '
*   GENERATION_FORCED        =
*   NEW_SEL                  =
*   NO_STRUCTURE_CHECK       = ' '
*   DATA_EXIT                = ' '
* IMPORTING
*   PROGNAME                 =
* TABLES
*   SELTAB                   =
   EXCEPTIONS
     TABLE_IS_STRUCTURE       = 1
     TABLE_NOT_EXISTS         = 2
     DB_NOT_EXISTS            = 3
     NO_PERMISSION            = 4
     NO_CHANGE_ALLOWED        = 5
     OTHERS                   = 6
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Need to Create the STATUS Profile for Q-Info record

Hi Guys,
Basically in the Q-Info record we have status profiles like VN, SP, MP OM and MP NOM etc... Under this status profiles there are few staus profiles assigned to it, in the same way
I need to create the status profile for Q-Info record under the status profile MP NOM (Non Original Mfgr MP), so that when I am creating the Q-Info record I can select the status profile which is under the MP NOM.
Guys anyone can guide me to create the status profile in BS02.
Regards,
SM

BS02--->Select the status say " QM_P_001" ->Copy As F6 - >Enter new name>enter.
Now chage the relevent data as per your requirement.

I have 2 children with iPods and I need to create 2 different accounts for them so they can play the same games. How do I do this?

I have 2 children with iPods and I need to create 2 different accounts for them so they can play the same games. How do I do this?

To restore the classic menu bar, you can do any of these:
orange Firefox button > Options > Menu Bar
tap the Alt key > View > Toolbars > Menu Bar
right-click a blank area of the tab bar or navigation bar > Menu Bar

Do I need to Create Primary Key Class for Entity beans with Local interface

Do I need to Create Primary Key Class for Entity beans with Local interface?
I have created my entity bean with the wizard in Sun One Studio and it does not create a primary key class for you.
I thought that the primary key class was required. My key is made up of only one field.
Anyone know the answer.
Jim

u dont need to create a primary key class for a entity bean.if ur table's primary key feild(int ,float) is a built in or primitive data type,then u dont need one.But if ur table has a primary key field which is non primitive (for example StudentID,ItemID etc)then u have to create a primary key class.
hope this helps :-)

What is variants...why we need to create these in bw for processchains run

what is variants...why we need to create these in bw for processchains run

Process Variant lets u select on what all Objects the process type need to process on.
http://help.sap.com/saphelp_nw04/helpdata/en/6e/192756029db54192427cf6853c77a7/content.htm
Ex : Create Index Variant will have the Cube name for which( Load ) the Indexes are created.

Need to Create New Commodity Codes....Please Help.

Hi All Experts,
I need to create new Commodity Codes for DE - Germany. The code numbers with the descriptiones I got from the Business user, there are 5 new codes.
I need to know how to create these commodity codes and what I have to maintain for the fields like -
Description:
Specific unit of measure:
Sec unit of measure:
Additional Info:
Min. Oil Product:
It is highly appriciable if you all can please suggest me the complete process for this.
Please help me ASAP. Thanks to you all in advance.
Best Regards....
Somraj.

90308930 u2013 Measuring fixture
Description
Electronic instruments and appliances fo
r measuring or checking electrical quant
ities, without recording device, n.e.s.
n.e.s.
Spec.unit of measure
KG   Kilogram
Additional info
2    Dispatch / Export
85423910 u2013 Amplifier
Comm./imp. code no.   85423910
Description
Electronic integrated circuits in the fo
rm of multichip integrated circuits cons
isting of two or more interconnected mon
olithic integrated circuits as specified
in note 8 (b) (3) to chapter 85 (excl.
such as processors, controllers,
controllers, memories and amplifiers)
Spec.unit of measure
KG   Kilogram
Additional info
2    Dispatch / Export
85339000 u2013 Resistor
Description
Parts of electrical resistors, incl. rhe
ostats and potentiometers, n.e.s.
Spec.unit of measure
KG   Kilogram
Additional info
2    Dispatch / Export
Not idea, as I can't find these on my system
82032000 u2013 Tool, gripper
85044082 - Rectifier
Try following link, I believe that can be helpful to you.
- +_Customs-Tariff-Number_+
Regards
JP

I need to create a NEW folder for bookmarks, not add to an existing one. I've been looking for over 2 hours and can only find the latter. Also, if possible, I'd like to remove a redundancy on my Bookmarks Toolbar. Thank You!

I am working on many projects and my bookmark folders suffice. I need to create new folders, but not "Smart Folders." After over 2 hours, I keep coming back to the same description of how to add new folders to existing ones. NOT what I want to do. This used to be easy, but the set up must have changed as I've been trying to do this all day with no success.
Also, somehow my gmail inbox appears twice in my bookmarks toolbar. Again, I am finding information that does not apply to me in help and former question files and links. How do I remove things from my bookmarks toolbar?
Thank you and PLEASE, oh Please e-mail the answer to me as I seem to have problems with your site.

Open the Bookmarks Library, to do that in the Bookmarks menu select "Organize Bookmarks"
In the Bookmarks Library, in the left hand pane click on "Bookmarks Toolbar" to select it, now in the Organize menu select "New Folder".
If you have the capability to right-click, you can also right-click on the Bookmarks Toolbar and select New Folder.
ps Questions on this forum are normally answered by volunteers, and for privacy reasons many will not be willing to send emails. You have also not shown your email address.

Do we need to create two different home for UCM and WC?

Hi All,
I am trying to create Webcenter VM(oracle linux 5) with ECM I used 11.1.1.5.0 version for all installable.for creating this VM.
here do we need to create separate Home for webcenter and UCM installations.
any one give me some proper directions to installation of the same
thank you!
Siva

yes i saw those folders but while installing I installed weblogic server in fmw folder.then Installed UCM on top of the i installed WC,but while installing WC its showing ora home is already exits select another or override. like that i am getting so i override. when i am creating domain its completed but i am not able to see startWeblogic.sh in bin folder of the domain.
I realized that i did mistake while installation.
can you please give me best infrastructure for web-center installation with all features(portal,sites spaces and content) I have sufficient memory to run multiple VMs.
Thank you!
Siva

I Need to create a dial-up for USB Modem please

Similar Messages

Maybe you are looking for